From: "Владимир Гусев" <vova1971@narod.ru> To: ALT Linux Community general discussions <community@lists.altlinux.org> Subject: [Comm] D-Link DWL-G630 на p5 - кто настраивал? Date: Tue, 8 Sep 2009 22:45:41 +0400 Message-ID: <20090908224541.4816ab83@narod.ru> (raw) Вставил эту wi-fi карточку, загрузил System Management Center, раздел Ethernet-интерфейсы. Слева в списке интерфейсов появился wlan0, справа название "Сетевая карта RaLink RT2561/RT61 rev B 802.11g". Вот вывод lsmod: [root@vaio wlan0]# lsmod Module Size Used by nls_iso8859_1 3788 1 mach64 42412 2 drm 158208 3 mach64 binfmt_misc 8020 1 nls_utf8 1600 2 nls_cp866 4876 3 vfat 10380 3 fat 50252 1 vfat nls_base 7056 5 nls_iso8859_1,nls_utf8,nls_cp866,vfat,fat dm_mod 56708 0 sg 28640 0 arc4 1676 2 ecb 2572 2 rt61pci 20400 0 rt2x00pci 7788 1 rt61pci rt2x00lib 29676 2 rt61pci,rt2x00pci led_class 4112 1 rt2x00lib input_polldev 3764 1 rt2x00lib usb_storage 36000 1 mac80211 170344 2 rt2x00pci,rt2x00lib usb_libusual 20288 1 usb_storage cfg80211 64524 2 rt2x00lib,mac80211 eeprom_93cx6 1964 1 rt61pci pcmcia 37068 0 snd_ymfpci 32480 0 gameport 11128 1 snd_ymfpci snd_ac97_codec 103920 1 snd_ymfpci ac97_bus 1580 1 snd_ac97_codec snd_pcm 74256 2 snd_ymfpci,snd_ac97_codec snd_opl3_lib 10316 1 snd_ymfpci snd_timer 20788 3 snd_ymfpci,snd_pcm,snd_opl3_lib snd_hwdep 7056 1 snd_opl3_lib snd_page_alloc 8852 2 snd_ymfpci,snd_pcm firewire_ohci 22320 0 snd_mpu401_uart 6956 1 snd_ymfpci uhci_hcd 22012 0 firewire_core 43808 1 firewire_ohci crc_itu_t 1868 2 rt61pci,firewire_core yenta_socket 23736 2 snd_rawmidi 21760 1 snd_mpu401_uart fan 4144 0 meye 26988 0 rtc_cmos 10316 0 psmouse 56132 0 rsrc_nonstatic 11404 1 yenta_socket snd_seq_device 6904 2 snd_opl3_lib,snd_rawmidi ohci1394 30300 0 evdev 9472 7 serio_raw 5296 0 videodev 35904 1 meye pcspkr 2316 0 v4l1_compat 14448 1 videodev pcmcia_core 35488 3 pcmcia,yenta_socket,rsrc_nonstatic i2c_piix4 9884 0 battery 10224 0 rtc_core 17608 1 rtc_cmos ac 4048 0 sony_laptop 31924 1 meye efficeon_agp 6304 0 processor 34464 1 snd 58180 9 snd_ymfpci,snd_ac97_codec,snd_pcm,snd_opl3_lib,snd_timer,snd_hwdep,snd_mpu401_uart,snd_rawmidi,snd_seq_device rtc_lib 2860 1 rtc_core thermal 12808 0 rfkill 10608 1 sony_laptop button 5244 0 soundcore 7072 1 snd usbcore 149168 4 usb_storage,usb_libusual,uhci_hcd ieee1394 85652 1 ohci1394 i2c_core 23584 2 drm,i2c_piix4 agpgart 34796 2 drm,efficeon_agp ext2 65780 4 mbcache 7568 1 ext2 ata_generic 4624 0 pata_acpi 3980 0 ata_piix 23056 0 libata 174572 3 ata_generic,pata_acpi,ata_piix sd_mod 34888 2 crc_t10dif 1708 1 sd_mod scsi_mod 150996 4 sg,usb_storage,libata,sd_mod ide_generic 1936 0 [permanent] ide_pci_generic 3888 0 ide_gd_mod 23344 8 piix 6132 7 ide_core 103592 4 ide_generic,ide_pci_generic,ide_gd_mod,piix А вот dmesg: [ 445.479529] rt61pci 0000:01:00.0: firmware: requesting rt2561.bin [ 445.502087] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 446.249831] rt61pci 0000:01:00.0: firmware: requesting rt2561.bin [ 446.279650] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 1050.327991] rt61pci 0000:01:00.0: firmware: requesting rt2561.bin [ 1050.474709] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 1051.045282] rt61pci 0000:01:00.0: firmware: requesting rt2561.bin [ 1051.074759] phy0 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 1080.050998] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0 [ 1080.091558] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff [ 1080.093701] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00002100, value=0xffffffff [ 1080.373723] rt61pci 0000:01:00.0: PCI INT A disabled [ 1086.920312] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0 [ 1086.927822] pci 0000:01:00.0: reg 10 32bit mmio: [0xffff8000-0xffffffff] [ 1086.959495] rt61pci 0000:01:00.0: enabling device (0000 -> 0002) [ 1086.960663] rt61pci 0000:01:00.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9 [ 1086.960859] rt61pci 0000:01:00.0: setting latency timer to 64 [ 1087.099631] phy1: Selected rate control algorithm 'minstrel' [ 1087.115042] Registered led device: rt61pci-phy1::radio [ 1087.115551] Registered led device: rt61pci-phy1::assoc [ 1132.028771] rt61pci 0000:01:00.0: firmware: requesting rt2561.bin [ 1132.052986] phy1 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. [ 1132.342501] rt61pci 0000:01:00.0: firmware: requesting rt2561.bin [ 1132.361461] phy1 -> rt2x00lib_request_firmware: Error - Failed to request Firmware. Может поставить еще пакетов с firware, или модулей ядра типа madwifi? Или и того и другого? -- С уважением, Владимир Гусев
next reply other threads:[~2009-09-08 18:45 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2009-09-08 18:45 Владимир Гусев [this message] 2009-09-08 19:05 ` Владимир Гусев 2009-09-09 7:53 ` Владимир Гусев 2009-09-09 8:01 ` Владимир Гусев 2009-09-09 8:23 ` Arcady Ivanov 2009-09-09 8:53 ` Владимир Гусев 2009-09-09 16:17 ` Владимир Гусев 2009-09-09 16:26 ` [Comm] [JT] " Konstantin Pavlov 2009-09-09 17:09 ` Владимир Гусев 2009-09-09 19:06 ` Arcady Ivanov 2009-09-10 7:37 ` Владимир Гусев 2009-09-11 3:15 ` Tsaryuk Maksim 2009-09-11 4:53 ` Arcady Ivanov 2009-09-12 17:17 ` Michael Shigorin 2009-09-12 19:20 ` Andrey Rahmatullin 2009-09-10 5:49 ` [Comm] " Dmitriy Kruglikov
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20090908224541.4816ab83@narod.ru \ --to=vova1971@narod.ru \ --cc=community@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git