From: "Владимир Гусев" <vova1971@narod.ru> To: ALT Linux Community general discussions <community@lists.altlinux.org> Subject: [Comm] pcmcia и карта Motorola Mariner Ethernet/Modem Date: Tue, 8 Sep 2009 15:36:23 +0400 Message-ID: <20090908153623.5776adc9@narod.ru> (raw) В последние года 2 никогда не было проблем с этой карточкой - опознавалось само влет. На p5 же - странности.. Хотел вставить карту в Sony Vaio PCG-C1VR/BP - ничего нет. Привожу различные виды "ругани": отрывки из dmesg [ 41.545015] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 41.554853] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 41.557647] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 41.563089] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 41.571834] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean. [ 41.628532] pcmcia 0.0: pcmcia: registering new device pcmcia0.0 [ 42.066204] smc91c92_cs 0.0: RequestIO : No card present Карту вытаскиваю и вставляю снова: [ 471.600818] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0 [ 474.748281] pcmcia_socket pcmcia_socket0: pccard: PCMCIA card inserted into slot 0 [ 474.749127] pcmcia 0.0: pcmcia: registering new device pcmcia0.0 [ 474.755776] smc91c92_cs 0.0: RequestIO : No card present [ 474.766249] smc91c92_cs 0.0: RequestIO : No card present Вот что говорит lsmod (модуль smc91c92_cs вроде фигурирует): [vova@vaio ~]$ lsmod Module Size Used by usbhid 38944 0 hid 65120 1 usbhid mach64 42412 2 drm 158208 3 mach64 binfmt_misc 8020 1 nls_utf8 1600 2 nls_cp866 4876 2 vfat 10380 2 fat 50252 1 vfat nls_base 7056 4 nls_utf8,nls_cp866,vfat,fat dm_mod 56708 0 sg 28640 0 serial_cs 20688 1 smc91c92_cs 19504 0 usb_storage 36000 0 mii 5132 1 smc91c92_cs usb_libusual 20288 1 usb_storage pcmcia 37068 2 serial_cs,smc91c92_cs snd_ymfpci 32480 0 gameport 11128 1 snd_ymfpci snd_ac97_codec 103920 1 snd_ymfpci ac97_bus 1580 1 snd_ac97_codec snd_pcm 74256 2 snd_ymfpci,snd_ac97_codec snd_opl3_lib 10316 1 snd_ymfpci firewire_ohci 22320 0 snd_timer 20788 3 snd_ymfpci,snd_pcm,snd_opl3_lib firewire_core 43808 1 firewire_ohci crc_itu_t 1868 1 firewire_core snd_hwdep 7056 1 snd_opl3_lib uhci_hcd 22012 0 yenta_socket 23736 3 snd_page_alloc 8852 2 snd_ymfpci,snd_pcm snd_mpu401_uart 6956 1 snd_ymfpci meye 26988 0 videodev 35904 1 meye fan 4144 0 rsrc_nonstatic 11404 1 yenta_socket psmouse 56132 0 snd_rawmidi 21760 1 snd_mpu401_uart snd_seq_device 6904 2 snd_opl3_lib,snd_rawmidi rtc_cmos 10316 0 ohci1394 30300 0 evdev 9472 8 serio_raw 5296 0 v4l1_compat 14448 1 videodev pcspkr 2316 0 battery 10224 0 sony_laptop 31924 1 meye rtc_core 17608 1 rtc_cmos pcmcia_core 35488 5 serial_cs,smc91c92_cs,pcmcia,yenta_socket,rsrc_nonstatic i2c_piix4 9884 0 ac 4048 0 rtc_lib 2860 1 rtc_core snd 58180 9 snd_ymfpci,snd_ac97_codec,snd_pcm,snd_opl3_lib,snd_timer,snd_hwdep,snd_mpu401_uart,snd_rawmidi,snd_seq_device rfkill 10608 1 sony_laptop efficeon_agp 6304 0 button 5244 0 soundcore 7072 1 snd thermal 12808 0 usbcore 149168 5 usbhid,usb_storage,usb_libusual,uhci_hcd processor 34464 1 ieee1394 85652 1 ohci1394 i2c_core 23584 2 drm,i2c_piix4 agpgart 34796 2 drm,efficeon_agp ext2 65780 4 mbcache 7568 1 ext2 ata_generic 4624 0 pata_acpi 3980 0 ata_piix 23056 0 libata 174572 3 ata_generic,pata_acpi,ata_piix sd_mod 34888 0 crc_t10dif 1708 1 sd_mod scsi_mod 150996 4 sg,usb_storage,libata,sd_mod ide_generic 1936 0 [permanent] ide_pci_generic 3888 0 ide_gd_mod 23344 8 piix 6132 7 ide_core 103592 4 ide_generic,ide_pci_generic,ide_gd_mod,piix Вот что в /etc/pcmcia/config.opts: [vova@vaio ~]$ cat /etc/pcmcia/config.opts # # Local PCMCIA Configuration File # #---------------------------------------------------------------------- # # System resources available for PCMCIA cards # # NOTE: these settings have no effect on resources assigned to a # CardBus bridge device itself; this file only affects resources # assigned to cards. Also, interrupt settings here will only affect # ISA bus interrupts assigned to 16-bit cards. PCI interrupts # generally can't be reconfigured. # # With the kernel PCMCIA subsystem, these settings also have no effect # at all on resources used for 32-bit CardBus cards. Those are set by # the PCI hotplug subsystem. # include port 0x100-0x3af include port 0x3e0-0x4ff include port 0x820-0x8ff include port 0xc00-0xcf7 include memory 0xc0000-0xfffff include memory 0xa0000000-0xa0ffffff include memory 0x60000000-0x60ffffff # These may hurt on FSC. # include port 0x3c0-0x3d2 # Exclude 0x3d3 as Radeon IGP MCE's if you touch these ports # include port 0x3d4-0x3df # High port numbers do not always work... # include port 0x1000-0x17ff # Extra port range for IBM Token Ring #include port 0xa00-0xaff card "Motorola Mariner Ethernet/Modem" manfid 0x0109, 0x0501 bind "smc91c92_cs","serial_cs" Последний абзац про Моторолу я потом приписал, но это как мертвому припарка... Включал закомментаренные тут порты - та же картина маслом.. Вот на всякий случай lspci: [vova@vaio ~]$ lspci 00:00.0 Host bridge: Transmeta Corporation LongRun Northbridge 00:00.1 RAM memory: Transmeta Corporation SDRAM controller 00:00.2 RAM memory: Transmeta Corporation BIOS scratchpad 00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02) 00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) 00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) 00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03) 00:08.0 FireWire (IEEE 1394): Texas Instruments TSB43AA22 IEEE-1394 Controller (PHY/Link Integrated) (rev 02) 00:09.0 Multimedia audio controller: Yamaha Corporation YMF-754 [DS-1E Audio Controller] 00:0a.0 Communication controller: Conexant Systems, Inc. HCF 56k Data/Fax/Voice/Spkp Modem (rev 08) 00:0b.0 Multimedia controller: Kawasaki Steel Corporation KL5A72002 Motion JPEG (rev 03) 00:0c.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 80) 00:0d.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M (rev 64) Ну и напоследок: [vova@vaio ~]$ uname -a Linux vaio.gusev.ru 2.6.30-std-def-alt10 #1 SMP Mon Aug 17 17:08:11 UTC 2009 i586 GNU/Linux Что подскажете? P.S. В Windows 2000 на этом же компе карта опознается. правда как модем (то бишь часть ее функционала), но наверняка с драйверами будет все. это я к тому, что карточка живая и сам слот pcmcia тоже "скорее жив, чем мертв". -- С уважением, Владимир Гусев
next reply other threads:[~2009-09-08 11:36 UTC|newest] Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top 2009-09-08 11:36 Владимир Гусев [this message] 2009-09-08 13:05 ` Владимир Гусев
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20090908153623.5776adc9@narod.ru \ --to=vova1971@narod.ru \ --cc=community@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git