* [Comm] подключить сканер от МФУ HP 3055 по ethernet
@ 2009-04-14 14:53 Yuri Bushmelev
2009-04-15 6:12 ` Денис Черносов
0 siblings, 1 reply; 5+ messages in thread
From: Yuri Bushmelev @ 2009-04-14 14:53 UTC (permalink / raw)
To: ALT Linux Community general discussions
Доброго времени суток!
Сегодня возникла необходимость подключить сканер от МФУ HP LJ 3055 к ALD
4.1. Само МФУ подключено в локальную сеть через ethernet.
Поставил sane и hplip. Выкинул из sane.d все, создал файл dll.conf, в нем
оставил только net и hpaio.
hp-probe -bnet -escan МФУ находит. scanimage по URI/алиасу цепляется и
сканирует. xsane по URI/алиасу тоже.
Как теперь этот девайс прописать дефолтным для sane?
Если запускать просто xsane или scanimage без URI или алиаса, то все
заканчивается традиционным сообщением о том, что устройства не найдены. В
OOo сканер тоже не видно.
У меня подозрение, что для того, чтобы сканер увиделся другими приложениями,
его должен увидеть scanimage -L, но я не уверен, что в случае с сетевым
сканером это вообще реально.
Был ли у кого-то успешный опыт подцепляния сетевых сканеров?
--
С уважением,
Бушмелев Юрий
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Comm] подключить сканер от МФУ HP 3055 по ethernet
2009-04-14 14:53 [Comm] подключить сканер от МФУ HP 3055 по ethernet Yuri Bushmelev
@ 2009-04-15 6:12 ` Денис Черносов
2009-04-15 8:41 ` Yuri Bushmelev
0 siblings, 1 reply; 5+ messages in thread
From: Денис Черносов @ 2009-04-15 6:12 UTC (permalink / raw)
To: ALT Linux Community general discussions
14 апреля 2009 г. 19:53 пользователь Yuri Bushmelev
<jay4mail@gmail.com> написал:
> Был ли у кого-то успешный опыт подцепляния сетевых сканеров?
У меня работает hp3055 без особых телодвижений. Ничего ниоткуда не
выкидывал, ничего дополнительно не прописывал. Инсталляцию провел
через приложенную гуевую утилиту (hp-setup, кажется).
Проверьте, у вас демоны hplip запущены на клиенте?
--
С уважением,
Черносов Денис
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Comm] подключить сканер от МФУ HP 3055 по ethernet
2009-04-15 6:12 ` Денис Черносов
@ 2009-04-15 8:41 ` Yuri Bushmelev
2009-04-15 9:49 ` Igor Vlasenko
0 siblings, 1 reply; 5+ messages in thread
From: Yuri Bushmelev @ 2009-04-15 8:41 UTC (permalink / raw)
To: ALT Linux Community general discussions
В сообщении от Среда 15 апреля 2009 Денис Черносов написал(a):
> 14 апреля 2009 г. 19:53 пользователь Yuri Bushmelev
>
> <jay4mail@gmail.com> написал:
> > Был ли у кого-то успешный опыт подцепляния сетевых сканеров?
>
> У меня работает hp3055 без особых телодвижений. Ничего ниоткуда не
> выкидывал, ничего дополнительно не прописывал. Инсталляцию провел
> через приложенную гуевую утилиту (hp-setup, кажется).
>
> Проверьте, у вас демоны hplip запущены на клиенте?
Вот только что разобрался. Я вчера попробовал запустить hp-setup, оно мне
предложило настроить CUPS queue, я отказался, потому как печатать на нем
мне не надо было с этого компа (сканер и компьютер принадлежат разным
организациям, находящимся в одном помещении). Как оказалось - зря. Сейчас в
спокойной обстановке пошарился по сайту hplip и нашел решение:
http://hplipopensource.com/node/212
Symptoms:
OpenOffice or xsane cannot see my network connected scanner
Cause:
CUPS queue not configured properly
Solution:
For network scanning, the "hp:/net/..." URI must be configured in the CUPS
queue for auto-discovery by OpenOffice and xsane.
Думаю, надо бы куда-то на wiki пульнуть. В какой раздел?
--
С уважением,
Бушмелев Юрий
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2009-04-15 10:38 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-04-14 14:53 [Comm] подключить сканер от МФУ HP 3055 по ethernet Yuri Bushmelev
2009-04-15 6:12 ` Денис Черносов
2009-04-15 8:41 ` Yuri Bushmelev
2009-04-15 9:49 ` Igor Vlasenko
2009-04-15 10:38 ` Yuri Bushmelev
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git