* [Comm] InstallFlash @ 2009-03-14 7:30 Rinat Bikov 2009-03-14 8:14 ` Хихин Руслан 2009-03-15 17:05 ` Rinat Bikov 0 siblings, 2 replies; 11+ messages in thread From: Rinat Bikov @ 2009-03-14 7:30 UTC (permalink / raw) To: ALT Linux Community general discussions Здравствуйте, уважаемые! Вчера-сегодня пробовал создать InstallFlash на чужой флешке - не вышло... Делал по шагам, как написано в http://www.altlinux.org/InstallFlash. Со своей флешкой раньше это выходило (MyFlash). Теперь с чужой флешкой (SuperTalent) на 4гига при загрузке пишет следующее: This is not a bootable disk. Please insert a bootable floppy and press any key to try again... Что я мог сделать не так? ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Comm] InstallFlash 2009-03-14 7:30 [Comm] InstallFlash Rinat Bikov @ 2009-03-14 8:14 ` Хихин Руслан 2009-03-14 8:32 ` Rinat Bikov 2009-03-15 17:05 ` Rinat Bikov 1 sibling, 1 reply; 11+ messages in thread From: Хихин Руслан @ 2009-03-14 8:14 UTC (permalink / raw) To: community [-- Attachment #1: Type: text/plain, Size: 419 bytes --] Здравствуйте Rinat Bikov В сообщении от 14 марта 2009 Rinat Bikov написал(a): > Здравствуйте, уважаемые! ... > Что я мог сделать не так? вопрос конечно интересный :) Скорей всего не прошла команда syslinux -- А ещё говорят так (fortune): MESSAGE ACKNOWLEDGED -- The Pershing II missiles have been launched. ________________________________________________________________________ С уважением Хихин Руслан [-- Attachment #2: This is a digitally signed message part. --] [-- Type: application/pgp-signature, Size: 198 bytes --] ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Comm] InstallFlash 2009-03-14 8:14 ` Хихин Руслан @ 2009-03-14 8:32 ` Rinat Bikov 2009-03-14 8:56 ` Rinat Bikov 2009-03-14 23:24 ` Michael A. Kangin 0 siblings, 2 replies; 11+ messages in thread From: Rinat Bikov @ 2009-03-14 8:32 UTC (permalink / raw) To: hihin, ALT Linux Community general discussions 14 марта 2009 г. 12:14 пользователь Хихин Руслан написал: > Здравствуйте Rinat Bikov > В сообщении от 14 марта 2009 Rinat Bikov написал(a): > > Здравствуйте, уважаемые! > ... > > Что я мог сделать не так? > вопрос конечно интересный :) > Скорей всего не прошла команда syslinux Но sudo cmp -n 404 /dev/sdb /dev/sdd не выдаёт несовпадений даже после перезагрузки... А между тем с /dev/sdd загружается, а c /dev/sdb - нет... ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Comm] InstallFlash 2009-03-14 8:32 ` Rinat Bikov @ 2009-03-14 8:56 ` Rinat Bikov 2009-03-14 23:24 ` Michael A. Kangin 1 sibling, 0 replies; 11+ messages in thread From: Rinat Bikov @ 2009-03-14 8:56 UTC (permalink / raw) To: ALT Linux Community general discussions 14 марта 2009 г. 12:32 пользователь Rinat Bikov написал: > 14 марта 2009 г. 12:14 пользователь Хихин Руслан написал: >> Здравствуйте Rinat Bikov >> В сообщении от 14 марта 2009 Rinat Bikov написал(a): >> > Здравствуйте, уважаемые! >> ... >> > Что я мог сделать не так? >> вопрос конечно интересный :) >> Скорей всего не прошла команда syslinux > > Но sudo cmp -n 404 /dev/sdb /dev/sdd > не выдаёт несовпадений даже после перезагрузки... > А между тем с /dev/sdd загружается, а c /dev/sdb - нет... > Вывод разделов SuperTalent: Disk /dev/sdb: 4141 MB, 4141875200 bytes 23 heads, 22 sectors/track, 15987 cylinders Units = cylinders of 506 * 512 = 259072 bytes Disk identifier: 0x04030201 Device Boot Start End Blocks Id System /dev/sdb1 1 606 153307 c W95 FAT32 (LBA) /dev/sdb2 * 607 15987 3891393 c W95 FAT32 (LBA) Вывод разделов MyFlash: Disk /dev/sde: 8086 MB, 8086617600 bytes 255 heads, 63 sectors/track, 983 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x11cbcecd Device Boot Start End Blocks Id System /dev/sde1 1 415 3333456 c W95 FAT32 (LBA) /dev/sde2 * 416 983 4562460 c W95 FAT32 (LBA) -- С уважением, Ринат Биков. -- Как правильно задавать вопросы: http://maddog.sitengine.ru/smart-question-ru.html Помогает: http://search.altlinux.org Стоит попробовать: http://mail.google.com IRC-канал: #altlinux на irc.freenode.net ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Comm] InstallFlash 2009-03-14 8:32 ` Rinat Bikov 2009-03-14 8:56 ` Rinat Bikov @ 2009-03-14 23:24 ` Michael A. Kangin 1 sibling, 0 replies; 11+ messages in thread From: Michael A. Kangin @ 2009-03-14 23:24 UTC (permalink / raw) To: ALT Linux Community general discussions On 14 марта 2009 Rinat Bikov wrote: > > > Что я мог сделать не так? > > вопрос конечно интересный :) > > Скорей всего не прошла команда syslinux > > Но sudo cmp -n 404 /dev/sdb /dev/sdd > не выдаёт несовпадений даже после перезагрузки... syslinux прописывает бутсектор в раздел с файловой системой. То есть, надо сравнивать не sdb и sdd, а sdb2 и sdd2 (они же у вас активные?) > А между тем с /dev/sdd загружается, а c /dev/sdb - нет... -- wbr, Michael A. Kangin ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Comm] InstallFlash 2009-03-14 7:30 [Comm] InstallFlash Rinat Bikov 2009-03-14 8:14 ` Хихин Руслан @ 2009-03-15 17:05 ` Rinat Bikov 2009-03-15 17:27 ` Vladimir Karpinsky 2009-03-15 18:58 ` Michael A. Kangin 1 sibling, 2 replies; 11+ messages in thread From: Rinat Bikov @ 2009-03-15 17:05 UTC (permalink / raw) To: ALT Linux Community general discussions [-- Attachment #1: Type: text/plain, Size: 1244 bytes --] 14 марта 2009 г. 11:30 пользователь Rinat Bikov написал: > Вчера-сегодня пробовал создать InstallFlash на чужой флешке - не вышло... > Делал по шагам, как написано в http://www.altlinux.org/InstallFlash. > Со своей флешкой раньше это выходило (MyFlash). > Теперь с чужой флешкой (SuperTalent) на 4гига при загрузке пишет следующее: > This is not a bootable disk. Please insert a bootable floppy and press > any key to try again... Сейчас спросил у дебианщика, он ответил, что у него тоже было такое: одна флешка на 1 гиг, другая - на 2 гига, он производил над ними одни и те же действия, которая на 1 гиг загружается, вторая - нет. Флешки были также от разных производителей. Есть подозрение, что в первом секторе у некоторых флешек содержится лишняя информация, которая не позволяет системе загрузиться с неё, либо биос моей машины неверно определяет загрузочность флешки... В частности замечал, что моя загрузочная флешка иногда на некоторых компах также не загружается (что было странно: на один комп я линукс ставил с этой флешки, попробовал загрузиться на нём с этой флешки через некоторое время - не вышло по той же причине, а дома загрузился нормально). Если кому интересно, то к письму прилагаю первые 512 байт незагружаемой флешки. [-- Attachment #2: bootsector.hellen --] [-- Type: application/octet-stream, Size: 512 bytes --] ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Comm] InstallFlash 2009-03-15 17:05 ` Rinat Bikov @ 2009-03-15 17:27 ` Vladimir Karpinsky 2009-03-15 17:42 ` Starodumoff Ilya 2009-03-15 18:58 ` Michael A. Kangin 1 sibling, 1 reply; 11+ messages in thread From: Vladimir Karpinsky @ 2009-03-15 17:27 UTC (permalink / raw) To: ALT Linux Community general discussions Rinat Bikov пишет: > 14 марта 2009 г. 11:30 пользователь Rinat Bikov написал: >> Вчера-сегодня пробовал создать InstallFlash на чужой флешке - не вышло... >> Делал по шагам, как написано в http://www.altlinux.org/InstallFlash. >> Со своей флешкой раньше это выходило (MyFlash). >> Теперь с чужой флешкой (SuperTalent) на 4гига при загрузке пишет следующее: >> This is not a bootable disk. Please insert a bootable floppy and press >> any key to try again... > > Сейчас спросил у дебианщика, он ответил, что у него тоже было такое: > одна флешка на 1 гиг, другая - на 2 гига, он производил над ними одни > и те же действия, которая на 1 гиг загружается, вторая - нет. > Флешки были также от разных производителей. > Есть подозрение, что в первом секторе у некоторых флешек содержится > лишняя информация, которая не позволяет системе загрузиться с неё, > либо биос моей машины неверно определяет загрузочность флешки... Мне приходится делать загрузочными карты CF, которые работают через переходник IDE-CF, причём это всё должно работать на промкомпьютерах с очень старым БИОСом. Последнее время порядок действия примерно такой: форматирование и fdisk /mbr на том компьютере, на котором должно грузиться, а потом копирование данных и системы как угодно. Всё это делается под DOS'ом, но у меня есть подозрения, что Вы наступаете примерно на те же грабли. Неоднократно проверено, что на сравнительно новых компьютерах первый этап (форматирование и перезапись mbr) можно опустить --- и так всё работает. М.б. форматирование и необязательно (делаю на всякий случай), но без fdisk /mbr загрузка не происходит точно. -- С уважением, Владимир. ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Comm] InstallFlash 2009-03-15 17:27 ` Vladimir Karpinsky @ 2009-03-15 17:42 ` Starodumoff Ilya 2009-03-15 17:58 ` Vladimir Karpinsky 0 siblings, 1 reply; 11+ messages in thread From: Starodumoff Ilya @ 2009-03-15 17:42 UTC (permalink / raw) To: community В сообщении от 15 марта 2009 Vladimir Karpinsky написал(a): > Мне приходится делать загрузочными карты CF, которые работают через > переходник IDE-CF, причём это всё должно работать на промкомпьютерах с > очень старым БИОСом. Последнее время порядок действия примерно такой: > форматирование и fdisk /mbr на том компьютере, на котором должно грузиться, > а потом копирование данных и системы как угодно. Всё это делается под > DOS'ом, но у меня есть подозрения, что Вы наступаете примерно на те же > грабли. Неоднократно проверено, что на сравнительно новых компьютерах > первый этап (форматирование и перезапись mbr) можно опустить --- и так всё > работает. М.б. форматирование и необязательно (делаю на всякий случай), но > без fdisk /mbr загрузка не происходит точно. ide-cf это немного другое... хотя cf карта тоже не всякая подойдет Да и адаптеры некоторые dma не умеют... Возможность и тип загрузки с usb-flash целиком зависит от материнской платы и самой флешки. Некоторые мат.платы грузятся исключительно с usb-zip. Некоторые с usb-hdd. Некоторые хоть как... Некоторые флешки определяются биосом как hdd, некоторые исключительно как "removable" Способы подготовки флешек, естественно, для zip/hdd разные Универсального ("стопудового") , способа загрузки со "свистков", к сожалению, нет. Все упирается в конкретные железячки. -- С уважением, Стародумов Илья ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Comm] InstallFlash 2009-03-15 17:42 ` Starodumoff Ilya @ 2009-03-15 17:58 ` Vladimir Karpinsky 2009-03-15 18:12 ` Starodumoff Ilya 0 siblings, 1 reply; 11+ messages in thread From: Vladimir Karpinsky @ 2009-03-15 17:58 UTC (permalink / raw) To: ALT Linux Community general discussions Starodumoff Ilya пишет: > В сообщении от 15 марта 2009 Vladimir Karpinsky написал(a): >> Мне приходится делать загрузочными карты CF, которые работают через >> переходник IDE-CF, причём это всё должно работать на промкомпьютерах с >> очень старым БИОСом. Последнее время порядок действия примерно такой: >> форматирование и fdisk /mbr на том компьютере, на котором должно грузиться, >> а потом копирование данных и системы как угодно. Всё это делается под >> DOS'ом, но у меня есть подозрения, что Вы наступаете примерно на те же >> грабли. Неоднократно проверено, что на сравнительно новых компьютерах >> первый этап (форматирование и перезапись mbr) можно опустить --- и так всё >> работает. М.б. форматирование и необязательно (делаю на всякий случай), но >> без fdisk /mbr загрузка не происходит точно. > > ide-cf это немного другое... хотя cf карта тоже не всякая подойдет > Да и адаптеры некоторые dma не умеют... Я не говорю о _всех_ картах, там иногда такие интересности случаются, что сказки отдыхают. Я говорю о тех картах, которые _удалось_ сделать загрузочными. Но мне до сих пор даже с этими картами непонятно, почему без fdsik /mbr они на более-менее современных матплалтах могут быть загрузочными, а на старых --- нет. Естественно, в обоих случаях используется один и тот же адаптер. Напрашивается вывод, что есть какие-то различия в mbr, или в его понимании матплатами. Именно об этом я и хотел предупредить. -- С уважением, Владимир. ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Comm] InstallFlash 2009-03-15 17:58 ` Vladimir Karpinsky @ 2009-03-15 18:12 ` Starodumoff Ilya 0 siblings, 0 replies; 11+ messages in thread From: Starodumoff Ilya @ 2009-03-15 18:12 UTC (permalink / raw) To: community В сообщении от 15 марта 2009 Vladimir Karpinsky написал(a): > Я не говорю о _всех_ картах, там иногда такие интересности случаются, что > сказки отдыхают. Я говорю о тех картах, которые _удалось_ сделать > загрузочными. Но мне до сих пор даже с этими картами непонятно, почему без > fdsik /mbr они на более-менее современных матплалтах могут быть > загрузочными, а на старых --- нет. Естественно, в обоих случаях > используется один и тот же адаптер. Напрашивается вывод, что есть какие-то > различия в mbr, или в его понимании матплатами. Именно об этом я и хотел > предупредить. Ну в данном топике ide-cf я коснулся вскольз, поскольку тоже приходилось зрузиться с переходников. Вообще на данную тему вот: http://forum.ixbt.com/topic.cgi?id=27:8844 http://www.hjreggel.net/cardspeed/cs_udmacf.html по второй ссылке в районе ATA Type вроде для загрузки с переходником подходят карты c ATA Type = fixed, если не ошибаюсь -- С уважением, Стародумов Илья ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Comm] InstallFlash 2009-03-15 17:05 ` Rinat Bikov 2009-03-15 17:27 ` Vladimir Karpinsky @ 2009-03-15 18:58 ` Michael A. Kangin 1 sibling, 0 replies; 11+ messages in thread From: Michael A. Kangin @ 2009-03-15 18:58 UTC (permalink / raw) To: ALT Linux Community general discussions On Sunday 15 March 2009 20:05:08 Rinat Bikov wrote: > Сейчас спросил у дебианщика, он ответил, что у него тоже было такое: > одна флешка на 1 гиг, другая - на 2 гига, он производил над ними одни > и те же действия, которая на 1 гиг загружается, вторая - нет. > Флешки были также от разных производителей. > Есть подозрение, что в первом секторе у некоторых флешек содержится > лишняя информация, которая не позволяет системе загрузиться с неё, > либо биос моей машины неверно определяет загрузочность флешки... > В частности замечал, что моя загрузочная флешка иногда на некоторых > компах также не загружается (что было странно: на один комп > я линукс ставил с этой флешки, попробовал загрузиться на нём с этой флешки > через некоторое время - не вышло по той же причине, а дома загрузился > нормально). > > Если кому интересно, то к письму прилагаю первые 512 байт > незагружаемой флешки. Ну выглядит похожим на правду. В качестве кода MBR можно еще попробовать /usr/lib/syslinux/mbr.bin. Однако, если флешка не грузится, это еще не значит, что проблема в коде MBR. Проблема может скрываться в таблице разделов (aka Partition Table), и в бутсекторе активного раздела. И в том, что именно там грузится программой в бутсекторе. Так что лучше еще смотреть, что там во втором разделе находится. -- wbr, Michael A. Kangin ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2009-03-15 18:58 UTC | newest] Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2009-03-14 7:30 [Comm] InstallFlash Rinat Bikov 2009-03-14 8:14 ` Хихин Руслан 2009-03-14 8:32 ` Rinat Bikov 2009-03-14 8:56 ` Rinat Bikov 2009-03-14 23:24 ` Michael A. Kangin 2009-03-15 17:05 ` Rinat Bikov 2009-03-15 17:27 ` Vladimir Karpinsky 2009-03-15 17:42 ` Starodumoff Ilya 2009-03-15 17:58 ` Vladimir Karpinsky 2009-03-15 18:12 ` Starodumoff Ilya 2009-03-15 18:58 ` Michael A. Kangin
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git