* [Comm] Создание шаблона OpenVZ (для терминального сервера) @ 2008-11-12 17:12 pofisis 2008-11-12 20:37 ` Eugene Prokopiev 0 siblings, 1 reply; 10+ messages in thread From: pofisis @ 2008-11-12 17:12 UTC (permalink / raw) To: ALT Linux Community general discussions Здравствуйте. Поставлена задача создать терминальный сервер на VE. Возникла проблема, т.к. я не так давно работаю с линуксом то собирать свой шаблон из дефолтного я немного побаиваюсь(мало ли какой-нибудь пакет не установлю и потом попробуй разберись почему что-то не работает), хотел узнать возможно ли создать шаблон из уже готового дистрибутива ALT Linux 4.0 Terminal? Опять же как я понимаю это будет весьма матерая вещь , что не так уж хорошо. Может кто-то сталкивался уже с такой задачей и у Вас есть оптимальный список пакетов которые необходимо доустановить в дефолтный шаблон для организации терминального сервера на VE с использованием KDE и ltsp 5? ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Comm] Создание шаблона OpenVZ (для терминального сервера) 2008-11-12 17:12 [Comm] Создание шаблона OpenVZ (для терминального сервера) pofisis @ 2008-11-12 20:37 ` Eugene Prokopiev 2008-11-12 20:59 ` [Comm] [ALTSP] " Aleksey Avdeev 2008-11-20 18:12 ` [Comm] " Michael Shigorin 0 siblings, 2 replies; 10+ messages in thread From: Eugene Prokopiev @ 2008-11-12 20:37 UTC (permalink / raw) To: ALT Linux Community general discussions, ALTSP users and developers list 12.11.08, pofisis написал(а): > Здравствуйте. > > Поставлена задача создать терминальный сервер на VE. Возникла проблема, > т.к. я не так давно работаю с линуксом то собирать свой шаблон из > дефолтного я немного побаиваюсь(мало ли какой-нибудь пакет не установлю > и потом попробуй разберись почему что-то не работает), хотел узнать > возможно ли создать шаблон из уже готового дистрибутива ALT Linux 4.0 > Terminal? Опять же как я понимаю это будет весьма матерая вещь , что не > так уж хорошо. > Может кто-то сталкивался уже с такой задачей и у Вас есть оптимальный > список пакетов которые необходимо доустановить в дефолтный шаблон для > организации терминального сервера на VE с использованием KDE и ltsp 5? Дублирую в ltsp-server@ 0 и лучше обсуждать там Вообще, если опыта у вас недостаточно, то лучше не тратить на это время, а установить ALTSP на отдельную машину. Если все же сильно надо, то см. сначала http://www.altlinux.org/LTSP/BuildYourself - хотя оно, похоже, несколько устарело Учтите также, что как минимум для dhcp-сервера в VE потребуется veth-интерфейс (либо проброшенный физический) вместо venet. Для справки можно подсматривать в профиль, по которому собирался дистрибутив ALTSP - http://git.altlinux.org/people/mike/packages/mkimage-profiles-desktop.git и http://git.altlinux.org/people/mike/packages/installer-feature-ltsp.git. Оттуда, кстати, видно, что вам, скорее всего, будет достаточно установить в VE пакет ltsp-server-kde и все, что он вытащит по зависимостям, а также выполнить что-то в духе написанного здесь - http://git.altlinux.org/people/mike/packages/installer-feature-ltsp.git?p=installer-feature-ltsp.git;a=blob;f=installer-feature-ltsp/preinstall.d/99-ltsp;h=689d1653d9c3a4fac8ffb48ac458f9e407442ac7;hb=master Для меня при размещении ALTSP в VE оказалось удобным нарезать его помельче и разнести по разным VE собственно терминальный сервер (в котором были DE и DM) и средства загрузки бездисковых клиентов (dhcp/tftp/dns - их роль прекрасно исполнил dnsmasq - и unfs3). При этом собственно ltsp-server-* мне оказался ненужным, разве что только первоначальный клиентский чрут и ядро/initrd пришлось взять готовое. Было бы неплохо распилить ltsp-server на ltsp-server и ltsp-build-client, но мне пока слабо, а больше никому, видимо, не надо. Соответствующее обсуждение тут - http://lists.altlinux.org/pipermail/ltsp-server/2008-May/001447.html -- С уважением, Прокопьев Евгений ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Comm] [ALTSP] Создание шаблона OpenVZ (для терминального сервера) 2008-11-12 20:37 ` Eugene Prokopiev @ 2008-11-12 20:59 ` Aleksey Avdeev 2008-11-20 18:12 ` [Comm] " Michael Shigorin 1 sibling, 0 replies; 10+ messages in thread From: Aleksey Avdeev @ 2008-11-12 20:59 UTC (permalink / raw) To: ALTSP users and developers list; +Cc: ALT Linux Community general discussions [-- Attachment #1: Type: text/plain, Size: 1559 bytes --] Eugene Prokopiev пишет: > 12.11.08, pofisis написал(а): >> Здравствуйте. >> >> Поставлена задача создать терминальный сервер на VE. Возникла проблема, >> т.к. я не так давно работаю с линуксом то собирать свой шаблон из >> дефолтного я немного побаиваюсь(мало ли какой-нибудь пакет не установлю >> и потом попробуй разберись почему что-то не работает), хотел узнать >> возможно ли создать шаблон из уже готового дистрибутива ALT Linux 4.0 >> Terminal? Опять же как я понимаю это будет весьма матерая вещь , что не >> так уж хорошо. >> Может кто-то сталкивался уже с такой задачей и у Вас есть оптимальный >> список пакетов которые необходимо доустановить в дефолтный шаблон для >> организации терминального сервера на VE с использованием KDE и ltsp 5? > > Дублирую в ltsp-server@ 0 и лучше обсуждать там > > Вообще, если опыта у вас недостаточно, то лучше не тратить на это > время, а установить ALTSP на отдельную машину. Если все же сильно > надо, то см. сначала http://www.altlinux.org/LTSP/BuildYourself - хотя > оно, похоже, несколько устарело Я использовал вариант с установкой на отдельную машину, и последующим перемещением в OVZовский контейнер (см. <http://lists.altlinux.org/pipermail/ltsp-server/2008-September/001611.html>). > > Учтите также, что как минимум для dhcp-сервера в VE потребуется > veth-интерфейс (либо проброшенный физический) вместо venet. Если dhcp-сервер держать отдельно от терминального -- veth-интерфейс не нужен (venet достаточно). -- С уважением. Алексей. [-- Attachment #2: OpenPGP digital signature --] [-- Type: application/pgp-signature, Size: 552 bytes --] ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Comm] Создание шаблона OpenVZ (для терминального сервера) 2008-11-12 20:37 ` Eugene Prokopiev 2008-11-12 20:59 ` [Comm] [ALTSP] " Aleksey Avdeev @ 2008-11-20 18:12 ` Michael Shigorin 2008-11-20 18:34 ` [Comm] Создание шаблона OpenVZ ( для терминального сервера ) Sergey 2008-11-20 20:06 ` [Comm] [ALTSP] Создание шаблона OpenVZ (для терминального сервера) Eugene Prokopiev 1 sibling, 2 replies; 10+ messages in thread From: Michael Shigorin @ 2008-11-20 18:12 UTC (permalink / raw) To: ALT Linux Community general discussions, ALTSP users and developers list On Wed, Nov 12, 2008 at 11:37:37PM +0300, Eugene Prokopiev wrote: > > Поставлена задача создать терминальный сервер на VE. Могу сказать, что это реально -- на конторе таким и пользуюсь. > > Возникла проблема, т.к. я не так давно работаю с линуксом то > > собирать свой шаблон из дефолтного я немного побаиваюсь Я тоже -- по крайней мере пока не добрался. Вообще "собрать шаблон" (в смысле сгенерировать) -- это задача намного сложней, чем "получить один экземпляр". Примерно как "сделать дистрибутив" vs "установить систему". > > (мало ли какой-нибудь пакет не установлю и потом попробуй > > разберись почему что-то не работает), хотел узнать возможно > > ли создать шаблон из уже готового дистрибутива ALT Linux 4.0 > > Terminal? Возможно -- поставить, засунуть получившийся корень в виде тарбола (должен быть не подкаталогом, а именно корневой каталог ФС развёрнутого терминала -- соответствовать точке входа в архив) в /var/lib/vz/tempate/cache/altlinux-4.0-*.tar.gz и далее выпускать этот VE в LAN или через veth, или через отдельно просунутый в контейнер интерфейс (vzctl ... --netif_add eth1). > > Опять же как я понимаю это будет весьма матерая вещь Ну в общем да. > > Может кто-то сталкивался уже с такой задачей и у Вас есть > > оптимальный список пакетов которые необходимо доустановить в > > дефолтный шаблон для организации терминального сервера на VE > > с использованием KDE и ltsp 5? Уже ответили, это действительно BuildYourself. Только лучше сперва потренируйтесь на превращении установленного на отдельную железку Desktop 4.0 или Server 4.0 в Terminal 4.0 таким образом -- по крайней мере будете уверенней делать в контейнере, когда известно, что путь один раз успешно пройден на железе. > Дублирую в ltsp-server@ - и лучше обсуждать там Именно. > Вообще, если опыта у вас недостаточно, то лучше не тратить на > это время, а установить ALTSP на отдельную машину. Если все же > сильно надо, то см. сначала http://altlinux.org/LTSP/BuildYourself > - хотя оно, похоже, несколько устарело Кажется, некритично. Но если всё-таки найдутся несоответствия -- просьба исправлять или хотя бы сообщать. > Учтите также, что как минимум для dhcp-сервера в VE потребуется > veth-интерфейс (либо проброшенный физический) вместо venet. Угу. Или сторонний dhcpd где-то в сети либо на HN. > Для справки можно подсматривать в профиль, по которому > собирался дистрибутив ALTSP - > http://git.altlinux.org/people/mike/packages/mkimage-profiles-desktop.git > и http://git.altlinux.org/people/mike/packages/installer-feature-ltsp.git. > Оттуда, кстати, видно, что вам, скорее всего, будет достаточно > установить в VE пакет ltsp-server-kde и все, что он вытащит по > зависимостям, а также выполнить что-то в духе написанного здесь - > http://git.altlinux.org/people/mike/packages/installer-feature-ltsp.git?p=installer-feature-ltsp.git;a=blob;f=installer-feature-ltsp/preinstall.d/99-ltsp;h=689d1653d9c3a4fac8ffb48ac458f9e407442ac7;hb=master Ага. Кстати, добавь-ка это своей рукой в BuildYourself. > Для меня при размещении ALTSP в VE оказалось удобным нарезать > его помельче и разнести по разным VE собственно терминальный > сервер (в котором были DE и DM) и средства загрузки бездисковых > клиентов (dhcp/tftp/dns - их роль прекрасно исполнил dnsmasq - > и unfs3). У нас dnsmasq в TODO (равно как и профиль для VE), но никак руки не дойдут. Может, хоть задокументируешь то, что пришлось сделать, где-то около /LTSP? > При этом собственно ltsp-server-* мне оказался ненужным, разве > что только первоначальный клиентский чрут и ядро/initrd > пришлось взять готовое. Было бы неплохо распилить ltsp-server > на ltsp-server и ltsp-build-client, но мне пока слабо, а больше > никому, видимо, не надо. Надо, но пока на это время закончилось -- чтоб вдвоём засесть да сделать. Что никак не отменяет возможности сделать более заинтересованным в данный момент и вместе втащить к нам :-) -- ---- WBR, Michael Shigorin <mike@altlinux.ru> ------ Linux.Kiev http://www.linux.kiev.ua/ ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Comm] Создание шаблона OpenVZ ( для терминального сервера ) 2008-11-20 18:12 ` [Comm] " Michael Shigorin @ 2008-11-20 18:34 ` Sergey 2008-11-20 18:46 ` [Comm] [JT] " Michael Shigorin 2008-11-20 20:06 ` [Comm] [ALTSP] Создание шаблона OpenVZ (для терминального сервера) Eugene Prokopiev 1 sibling, 1 reply; 10+ messages in thread From: Sergey @ 2008-11-20 18:34 UTC (permalink / raw) To: ALT Linux Community general discussions On Thursday 20 November 2008, Michael Shigorin wrote: > Вообще "собрать шаблон" (в смысле сгенерировать) -- это задача > намного сложней, Совсем нет, если попробовать. :-) Если через веб-интерфейс Альтератора. :-) -- С уважением, Сергей a_s_y@sama.ru ^ permalink raw reply [flat|nested] 10+ messages in thread
* [Comm] [JT] Re: Создание шаблона OpenVZ ( для терминального сервера ) 2008-11-20 18:34 ` [Comm] Создание шаблона OpenVZ ( для терминального сервера ) Sergey @ 2008-11-20 18:46 ` Michael Shigorin 2008-11-21 8:36 ` Sergey 0 siblings, 1 reply; 10+ messages in thread From: Michael Shigorin @ 2008-11-20 18:46 UTC (permalink / raw) To: ALT Linux Community general discussions On Thu, Nov 20, 2008 at 10:34:26PM +0400, Sergey wrote: > > Вообще "собрать шаблон" (в смысле сгенерировать) > > -- это задача намного сложней, > Совсем нет, если попробовать. :-) Если через веб-интерфейс > Альтератора. :-) Видишь ли... этот самый интерфейс как раз по части нетривиальности простейшей сборки по списку пакетов и довелось чинить: https://bugzilla.altlinux.org/show_bug.cgi?id=11310 Веришь -- пробовал ;-) -- ---- WBR, Michael Shigorin <mike@altlinux.ru> ------ Linux.Kiev http://www.linux.kiev.ua/ ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Comm] [JT] Re: Создание шаблона OpenVZ ( для терминального сервера ) 2008-11-20 18:46 ` [Comm] [JT] " Michael Shigorin @ 2008-11-21 8:36 ` Sergey 0 siblings, 0 replies; 10+ messages in thread From: Sergey @ 2008-11-21 8:36 UTC (permalink / raw) To: community On Thursday 20 November 2008, Michael Shigorin wrote: > > Совсем нет, если попробовать. :-) Если через веб-интерфейс > > Альтератора. :-) > > Видишь ли... этот самый интерфейс как раз по части > нетривиальности простейшей сборки по списку пакетов > и довелось чинить: > > https://bugzilla.altlinux.org/show_bug.cgi?id=11310 > > Веришь -- пробовал ;-) Ну, значит, я пробовал, уже, после тебя и проблем не встретил. :-) Честно. Хотя профиль, предварительно, я, кажется, руками писал... -- С уважением, Сергей a_s_y@sama.ru ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Comm] [ALTSP] Создание шаблона OpenVZ (для терминального сервера) 2008-11-20 18:12 ` [Comm] " Michael Shigorin 2008-11-20 18:34 ` [Comm] Создание шаблона OpenVZ ( для терминального сервера ) Sergey @ 2008-11-20 20:06 ` Eugene Prokopiev 2008-11-20 21:12 ` Michael Shigorin 1 sibling, 1 reply; 10+ messages in thread From: Eugene Prokopiev @ 2008-11-20 20:06 UTC (permalink / raw) To: shigorin, ALTSP users and developers list, ALT Linux Community general discussions > > Для справки можно подсматривать в профиль, по которому > > собирался дистрибутив ALTSP - > > http://git.altlinux.org/people/mike/packages/mkimage-profiles-desktop.git > > и http://git.altlinux.org/people/mike/packages/installer-feature-ltsp.git. > > Оттуда, кстати, видно, что вам, скорее всего, будет достаточно > > установить в VE пакет ltsp-server-kde и все, что он вытащит по > > зависимостям, а также выполнить что-то в духе написанного здесь - > > http://git.altlinux.org/people/mike/packages/installer-feature-ltsp.git?p=installer-feature-ltsp.git;a=blob;f=installer-feature-ltsp/preinstall.d/99-ltsp;h=689d1653d9c3a4fac8ffb48ac458f9e407442ac7;hb=master > > > Ага. Кстати, добавь-ка это своей рукой в BuildYourself. done > > Для меня при размещении ALTSP в VE оказалось удобным нарезать > > его помельче и разнести по разным VE собственно терминальный > > сервер (в котором были DE и DM) и средства загрузки бездисковых > > клиентов (dhcp/tftp/dns - их роль прекрасно исполнил dnsmasq - > > и unfs3). > > > У нас dnsmasq в TODO (равно как и профиль для VE), но никак руки > не дойдут. Может, хоть задокументируешь то, что пришлось > сделать, где-то около /LTSP? done там же - перенеси, если оказалось не в тему > > При этом собственно ltsp-server-* мне оказался ненужным, разве > > что только первоначальный клиентский чрут и ядро/initrd > > пришлось взять готовое. Было бы неплохо распилить ltsp-server > > на ltsp-server и ltsp-build-client, но мне пока слабо, а больше > > никому, видимо, не надо. > > > Надо, но пока на это время закончилось -- чтоб вдвоём засесть > да сделать. Что никак не отменяет возможности сделать более > заинтересованным в данный момент и вместе втащить к нам :-) Как только снова прижмет - попытаюсь :) -- С уважением, Прокопьев Евгений ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Comm] [ALTSP] Создание шаблона OpenVZ (для терминального сервера) 2008-11-20 20:06 ` [Comm] [ALTSP] Создание шаблона OpenVZ (для терминального сервера) Eugene Prokopiev @ 2008-11-20 21:12 ` Michael Shigorin 2008-11-26 7:40 ` Eugene Prokopiev 0 siblings, 1 reply; 10+ messages in thread From: Michael Shigorin @ 2008-11-20 21:12 UTC (permalink / raw) To: ltsp-server, community On Thu, Nov 20, 2008 at 11:06:18PM +0300, Eugene Prokopiev wrote: > > Ага. Кстати, добавь-ка это своей рукой в BuildYourself. > done Кстати, на той же страничке есть упоминание настройки fuse для работающего проброса устройств с клиентов. > > У нас dnsmasq в TODO (равно как и профиль для VE), но никак > > руки не дойдут. Может, хоть задокументируешь то, что > > пришлось сделать, где-то около /LTSP? > done там же - перенеси, если оказалось не в тему Нормально, спасибо. -- ---- WBR, Michael Shigorin <mike@altlinux.ru> ------ Linux.Kiev http://www.linux.kiev.ua/ ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Comm] [ALTSP] Создание шаблона OpenVZ (для терминального сервера) 2008-11-20 21:12 ` Michael Shigorin @ 2008-11-26 7:40 ` Eugene Prokopiev 0 siblings, 0 replies; 10+ messages in thread From: Eugene Prokopiev @ 2008-11-26 7:40 UTC (permalink / raw) To: ltsp-server, community 21.11.08, Michael Shigorin написал(а): > > > У нас dnsmasq в TODO (равно как и профиль для VE), но никак > > > руки не дойдут. Может, хоть задокументируешь то, что > > > пришлось сделать, где-то около /LTSP? > > done там же - перенеси, если оказалось не в тему > > > Нормально, спасибо. Вот пришлось повторить, поэтому более полно зафиксировал тут - http://admdev.blogspot.com/2008/11/altsp-inside-openvz-ve.html Также добавил ссылку на описание в http://www.altlinux.org/LTSP/BuildYourself -- С уважением, Прокопьев Евгений ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2008-11-26 7:40 UTC | newest] Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2008-11-12 17:12 [Comm] Создание шаблона OpenVZ (для терминального сервера) pofisis 2008-11-12 20:37 ` Eugene Prokopiev 2008-11-12 20:59 ` [Comm] [ALTSP] " Aleksey Avdeev 2008-11-20 18:12 ` [Comm] " Michael Shigorin 2008-11-20 18:34 ` [Comm] Создание шаблона OpenVZ ( для терминального сервера ) Sergey 2008-11-20 18:46 ` [Comm] [JT] " Michael Shigorin 2008-11-21 8:36 ` Sergey 2008-11-20 20:06 ` [Comm] [ALTSP] Создание шаблона OpenVZ (для терминального сервера) Eugene Prokopiev 2008-11-20 21:12 ` Michael Shigorin 2008-11-26 7:40 ` Eugene Prokopiev
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git