* [Comm] HP LJ p1005 @ 2008-09-15 6:58 SKeeper 2008-09-15 7:29 ` Шишков Евгений 0 siblings, 1 reply; 46+ messages in thread From: SKeeper @ 2008-09-15 6:58 UTC (permalink / raw) To: ALT Linux Community general discussions Имеется данный принтер и Alt Linux 4.0 Desktop. Поставил пакет foo2zjs_20080826-alt1_i586.rpm, в котором указана поддержка данного принтера. foo2zjs потянул за собой psutils - поставил. Далее зашел в localhost:631 и добавил сабжевый принтер. После этого пускаю на печать... и облом ;( Что тестовая страница, что из ООо - все равно ниче не печатает. Если полезть посмотреть на задания печати этого принтера, то показывает, что все выполнено и напечатано. Подскажите плиз, в какую сторону копать. ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-15 6:58 [Comm] HP LJ p1005 SKeeper @ 2008-09-15 7:29 ` Шишков Евгений 2008-09-15 7:33 ` Шишков Евгений 2008-09-25 7:41 ` [Comm] foo2zjs-20080923-alt1 Шишков Евгений 0 siblings, 2 replies; 46+ messages in thread From: Шишков Евгений @ 2008-09-15 7:29 UTC (permalink / raw) To: ALT Linux Community general discussions SKeeper пишет: > Имеется данный принтер и Alt Linux 4.0 Desktop. Поставил пакет > foo2zjs_20080826-alt1_i586.rpm, в котором указана поддержка данного > принтера. > foo2zjs потянул за собой psutils - поставил. > Далее зашел в localhost:631 и добавил сабжевый принтер. После этого > пускаю на > печать... и облом ;( Что тестовая страница, что из ООо - все равно ниче не > печатает. Если полезть посмотреть на задания печати этого принтера, то > показывает, что все выполнено и напечатано. > > Подскажите плиз, в какую сторону копать. Вы прошивочку не положили. 1) Запускаем консоль. Пишем "su -" и пароль рута. 2) Идём /usr/share/doc/foo2zjs-20080826/ 3) Запускаем: ./getweb p1005. Скачается прошивка sihpP1005.img. 4) Далее выполняем: arm2hpdl sihpP1005.img > sihpP1005.dl 5) Полученный файл sihpP1005.dl кладём в /usr/share/foo2zjs/firmware/ 6) Выключаем и включаем принтер. Прошивка должна в него загрузиться. 7) Печатаем. -- С уважением, Шишков Евгений (evgen[собак]svi[тчк]pp[тчк]ru) ------------- Надпись "выполнено 99%" радует только первые три часа... ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-15 7:29 ` Шишков Евгений @ 2008-09-15 7:33 ` Шишков Евгений 2008-09-15 7:39 ` Victor Zhuravlyov 2008-09-16 4:31 ` SKeeper 2008-09-25 7:41 ` [Comm] foo2zjs-20080923-alt1 Шишков Евгений 1 sibling, 2 replies; 46+ messages in thread From: Шишков Евгений @ 2008-09-15 7:33 UTC (permalink / raw) To: ALT Linux Community general discussions Шишков Евгений пишет: > SKeeper пишет: >> Имеется данный принтер и Alt Linux 4.0 Desktop. Поставил пакет >> foo2zjs_20080826-alt1_i586.rpm, в котором указана поддержка данного >> принтера. >> foo2zjs потянул за собой psutils - поставил. >> Далее зашел в localhost:631 и добавил сабжевый принтер. После этого >> пускаю на >> печать... и облом ;( Что тестовая страница, что из ООо - все равно >> ниче не >> печатает. Если полезть посмотреть на задания печати этого принтера, то >> показывает, что все выполнено и напечатано. >> >> Подскажите плиз, в какую сторону копать. > > Вы прошивочку не положили. > 1) Запускаем консоль. Пишем "su -" и пароль рута. > 2) Идём /usr/share/doc/foo2zjs-20080826/ > 3) Запускаем: ./getweb p1005. Скачается прошивка sihpP1005.img. > 4) Далее выполняем: arm2hpdl sihpP1005.img > sihpP1005.dl > 5) Полученный файл sihpP1005.dl кладём в /usr/share/foo2zjs/firmware/ > 6) Выключаем и включаем принтер. Прошивка должна в него загрузиться. > 7) Печатаем. > Пардон. p1005 работает через foo2xqx driver. Пункт 5 изменяю. 5) Полученный файл sihpP1005.dl кладём в /usr/share/foo2xqx/firmware/ ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-15 7:33 ` Шишков Евгений @ 2008-09-15 7:39 ` Victor Zhuravlyov 2008-09-16 4:31 ` SKeeper 1 sibling, 0 replies; 46+ messages in thread From: Victor Zhuravlyov @ 2008-09-15 7:39 UTC (permalink / raw) To: ALT Linux Community general discussions А не имеет ли этот принтер проблем в rdesktop? Помнится, вин-принтеры не печатают вроде в rdesktop ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-15 7:33 ` Шишков Евгений 2008-09-15 7:39 ` Victor Zhuravlyov @ 2008-09-16 4:31 ` SKeeper 2008-09-16 5:12 ` Шишков Евгений 1 sibling, 1 reply; 46+ messages in thread From: SKeeper @ 2008-09-16 4:31 UTC (permalink / raw) To: ALT Linux Community general discussions ок, спасибо, сегодня попробую. Хотелось бы, чтобы о необходимости докачивать прошивку можно было узнать в описание пакета, а не в гугле или рассылке. Может багу повесить? ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-16 4:31 ` SKeeper @ 2008-09-16 5:12 ` Шишков Евгений 2008-09-16 6:31 ` SKeeper 0 siblings, 1 reply; 46+ messages in thread From: Шишков Евгений @ 2008-09-16 5:12 UTC (permalink / raw) To: ALT Linux Community general discussions SKeeper пишет: > ок, спасибо, сегодня попробую. > > Хотелось бы, чтобы о необходимости докачивать прошивку можно было узнать > в описание пакета, а не в гугле или рассылке. Может багу повесить? Ну... в /usr/share/doc/foo2zjs-20080826/INSTALL вроде как описано. ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-16 5:12 ` Шишков Евгений @ 2008-09-16 6:31 ` SKeeper 2008-09-16 6:50 ` Andrey Rahmatullin 2008-09-16 6:55 ` Шишков Евгений 0 siblings, 2 replies; 46+ messages in thread From: SKeeper @ 2008-09-16 6:31 UTC (permalink / raw) To: ALT Linux Community general discussions Шишков Евгений пишет: > > Ну... в /usr/share/doc/foo2zjs-20080826/INSTALL вроде как описано. > > _______________________________________________ Вы после установки каждого пакета лезите в /usr/share/doc/... ? Ну т.е. Вы указали мне на правильное действие, я просто как-то не подумал посмотреть в /usr/share/doc. Тут можно конечно подправить мою психологию, потому что я успел привыкнуть, что пакет просто ставится и работает ;) ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-16 6:31 ` SKeeper @ 2008-09-16 6:50 ` Andrey Rahmatullin 2008-09-16 6:55 ` Шишков Евгений 1 sibling, 0 replies; 46+ messages in thread From: Andrey Rahmatullin @ 2008-09-16 6:50 UTC (permalink / raw) To: community [-- Attachment #1: Type: text/plain, Size: 433 bytes --] On Tue, Sep 16, 2008 at 10:31:09AM +0400, SKeeper wrote: > Вы после установки каждого пакета лезите в /usr/share/doc/... ? Да, если что-то непонятно. Приучайтесь. -- WBR, wRAR (ALT Linux Team) Powered by the ALT Linux fortune(8): Для начала я бы посоветовал сохранить оригинальный XF86Config-4, потом запустить fglrxconfig, взять оттуда секцию про fglrx и вставить ее сохраненный вариант. -- lakostis in community@ [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 197 bytes --] ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-16 6:31 ` SKeeper 2008-09-16 6:50 ` Andrey Rahmatullin @ 2008-09-16 6:55 ` Шишков Евгений 2008-09-16 7:27 ` Maks Re 1 sibling, 1 reply; 46+ messages in thread From: Шишков Евгений @ 2008-09-16 6:55 UTC (permalink / raw) To: ALT Linux Community general discussions SKeeper пишет: > Шишков Евгений пишет: >> >> Ну... в /usr/share/doc/foo2zjs-20080826/INSTALL вроде как описано. >> >> _______________________________________________ > > Вы после установки каждого пакета лезите в /usr/share/doc/... ? > Ну т.е. Вы указали мне на правильное действие, я просто как-то не > подумал посмотреть в /usr/share/doc. > Тут можно конечно подправить мою психологию, потому что я успел > привыкнуть, что пакет просто ставится и работает ;) А где, по Вашему, должна лежать документация? По нашему: в /usr/share/doc, либо искать в интернете. ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-16 6:55 ` Шишков Евгений @ 2008-09-16 7:27 ` Maks Re 2008-09-16 7:59 ` Mikhail Gusarov 2008-09-16 8:08 ` Шишков Евгений 0 siblings, 2 replies; 46+ messages in thread From: Maks Re @ 2008-09-16 7:27 UTC (permalink / raw) To: ALT Linux Community general discussions мне кажется, приятно и полезно было бы увидеть напомининие в консоль, о том что фирмварю для принтера надо найти. а доки <ссылка> тут. а инфа в доках должна быть... зы: человек, который никогда не сталкивался с подобными девайсами, удивляется... (например - я, когда узнал, что для моей одной wifi сетевухи требуется фирмваря) -- С уважением, Макс. ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-16 7:27 ` Maks Re @ 2008-09-16 7:59 ` Mikhail Gusarov 2008-09-16 8:08 ` Шишков Евгений 1 sibling, 0 replies; 46+ messages in thread From: Mikhail Gusarov @ 2008-09-16 7:59 UTC (permalink / raw) To: ALT Linux Community general discussions [-- Attachment #1: Type: text/plain, Size: 438 bytes --] Twas brillig at 11:27:36 16.09.2008 UTC+04 when admaks@gmail.com did gyre and gimble: MR> мне кажется, приятно и полезно было бы увидеть напомининие в MR> консоль, о том что фирмварю для принтера надо найти. а доки MR> <ссылка> тут. Совершенно согласен. Патчи приветствуются. -- [-- Attachment #2: Type: application/pgp-signature, Size: 196 bytes --] ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-16 7:27 ` Maks Re 2008-09-16 7:59 ` Mikhail Gusarov @ 2008-09-16 8:08 ` Шишков Евгений 2008-09-16 8:11 ` Mikhail Gusarov 1 sibling, 1 reply; 46+ messages in thread From: Шишков Евгений @ 2008-09-16 8:08 UTC (permalink / raw) To: ALT Linux Community general discussions Maks Re пишет: > мне кажется, > приятно и полезно было бы увидеть напомининие в консоль, о том что > фирмварю для принтера надо найти. а доки <ссылка> тут. > а инфа в доках должна быть... > > зы: человек, который никогда не сталкивался с подобными девайсами, удивляется... > (например - я, когда узнал, что для моей одной wifi сетевухи > требуется фирмваря) Применительно к foo2zjs. Допустим у меня принтер, которому не надо firmware, а при установке будет сообщение. Это тоже заведёт в заблуждение. Так что, наверное, лучший способ лезть в /usr/share/doc.. и читать, если не работает. А при Вашем подходе обновление системы будет пестрить всякими сообщениями... А следующее желание будет а-ля setup в windows. Зачем городить, если и так всё есть? ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-16 8:08 ` Шишков Евгений @ 2008-09-16 8:11 ` Mikhail Gusarov 2008-09-16 8:27 ` Шишков Евгений 0 siblings, 1 reply; 46+ messages in thread From: Mikhail Gusarov @ 2008-09-16 8:11 UTC (permalink / raw) To: ALT Linux Community general discussions [-- Attachment #1: Type: text/plain, Size: 420 bytes --] Twas brillig at 12:08:44 16.09.2008 UTC+04 when evgen@svi.pp.ru did gyre and gimble: ШЕ> А следующее желание будет а-ля setup в windows. Зачем городить, ШЕ> если и так всё есть? Очевидно, для того, чтобы системой могли пользоваться не только гики, но и нормальные люди. -- [-- Attachment #2: Type: application/pgp-signature, Size: 196 bytes --] ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-16 8:11 ` Mikhail Gusarov @ 2008-09-16 8:27 ` Шишков Евгений 2008-09-16 8:29 ` Mikhail Gusarov 0 siblings, 1 reply; 46+ messages in thread From: Шишков Евгений @ 2008-09-16 8:27 UTC (permalink / raw) To: ALT Linux Community general discussions Mikhail Gusarov пишет: > Twas brillig at 12:08:44 16.09.2008 UTC+04 when evgen@svi.pp.ru did gyre and gimble: > > ШЕ> А следующее желание будет а-ля setup в windows. Зачем городить, > ШЕ> если и так всё есть? > > Очевидно, для того, чтобы системой могли пользоваться не только гики, но > и нормальные люди. Не знал, что нормальные люди это те, кто живёт на Windows (чтож так инда мозг людей разрушила..). Ладно. Я написал небольшую документацию на русском (с примером) по установке. Сейчас пакет поедет в sisyphus и branch 4.1. ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-16 8:27 ` Шишков Евгений @ 2008-09-16 8:29 ` Mikhail Gusarov 2008-09-16 8:36 ` Шишков Евгений 0 siblings, 1 reply; 46+ messages in thread From: Mikhail Gusarov @ 2008-09-16 8:29 UTC (permalink / raw) To: ALT Linux Community general discussions [-- Attachment #1: Type: text/plain, Size: 477 bytes --] Twas brillig at 12:27:49 16.09.2008 UTC+04 when evgen@svi.pp.ru did gyre and gimble: ШЕ> Не знал, что нормальные люди это те, кто живёт на Windows (чтож так инда мозг ШЕ> людей разрушила..). Нормальные люди - это те, которые не впадают в экстаз от того, что после подключения железки она не работает. -- [-- Attachment #2: Type: application/pgp-signature, Size: 196 bytes --] ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-16 8:29 ` Mikhail Gusarov @ 2008-09-16 8:36 ` Шишков Евгений 2008-09-18 12:05 ` Анатолий Акатьев 0 siblings, 1 reply; 46+ messages in thread From: Шишков Евгений @ 2008-09-16 8:36 UTC (permalink / raw) To: ALT Linux Community general discussions Mikhail Gusarov пишет: > Twas brillig at 12:27:49 16.09.2008 UTC+04 when evgen@svi.pp.ru did gyre and gimble: > > ШЕ> Не знал, что нормальные люди это те, кто живёт на Windows (чтож так инда мозг > ШЕ> людей разрушила..). > > Нормальные люди - это те, которые не впадают в экстаз от того, что после > подключения железки она не работает. Ладно, проехали. Надеюсь документация на русском спасёт положение? ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-16 8:36 ` Шишков Евгений @ 2008-09-18 12:05 ` Анатолий Акатьев 2008-09-18 12:16 ` Шишков Евгений 0 siblings, 1 reply; 46+ messages in thread From: Анатолий Акатьев @ 2008-09-18 12:05 UTC (permalink / raw) To: ALT Linux Community general discussions В сообщении от Tuesday 16 September 2008 14:36:46 Шишков Евгений написал(а): > Mikhail Gusarov пишет: > > Twas brillig at 12:27:49 16.09.2008 UTC+04 when evgen@svi.pp.ru did gyre > > and gimble: > > > > ШЕ> Не знал, что нормальные люди это те, кто живёт на Windows (чтож так > > инда мозг ШЕ> людей разрушила..). > > > > Нормальные люди - это те, которые не впадают в экстаз от того, что после > > подключения железки она не работает. > > Ладно, проехали. > Надеюсь документация на русском спасёт положение? Евгений, а можно ли запускать скрипт сразу чтобы вышеуказанные пункты отрабатывал автоматом (например чтобы качал прошивку, клал куда надо)? > _______________________________________________ > community mailing list > community@lists.altlinux.org > https://lists.altlinux.org/mailman/listinfo/community -- С уважением Акатьев Анатолий. Руководитель отдела внедрения. тел.: 89509559748 icq : 190270141 www.master-system.ru ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-18 12:05 ` Анатолий Акатьев @ 2008-09-18 12:16 ` Шишков Евгений 2008-09-18 12:44 ` Mikhail Gusarov 0 siblings, 1 reply; 46+ messages in thread From: Шишков Евгений @ 2008-09-18 12:16 UTC (permalink / raw) To: ALT Linux Community general discussions Анатолий Акатьев пишет: > В сообщении от Tuesday 16 September 2008 14:36:46 Шишков Евгений написал(а): >> Mikhail Gusarov пишет: >>> Twas brillig at 12:27:49 16.09.2008 UTC+04 when evgen@svi.pp.ru did gyre >>> and gimble: >>> >>> ШЕ> Не знал, что нормальные люди это те, кто живёт на Windows (чтож так >>> инда мозг ШЕ> людей разрушила..). >>> >>> Нормальные люди - это те, которые не впадают в экстаз от того, что после >>> подключения железки она не работает. >> Ладно, проехали. >> Надеюсь документация на русском спасёт положение? > > Евгений, а можно ли запускать скрипт сразу чтобы вышеуказанные пункты > отрабатывал автоматом (например чтобы качал прошивку, клал куда надо)? Я уже думал об этом (вроде даже, на первый взгляд, это не сложно реализовать). Только врят ли всем понравится, что их система сама куда-то полезла и что-то скачала. А городить запросы на скачку и т.п. - не знаю как. ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-18 12:16 ` Шишков Евгений @ 2008-09-18 12:44 ` Mikhail Gusarov 2008-09-19 4:19 ` Шишков Евгений 0 siblings, 1 reply; 46+ messages in thread From: Mikhail Gusarov @ 2008-09-18 12:44 UTC (permalink / raw) To: ALT Linux Community general discussions [-- Attachment #1: Type: text/plain, Size: 598 bytes --] Twas brillig at 16:16:48 18.09.2008 UTC+04 when evgen@svi.pp.ru did gyre and gimble: ШЕ> Анатолий Акатьев пишет: ШЕ> Я уже думал об этом (вроде даже, на первый взгляд, это не сложно ШЕ> реализовать). Только врят ли всем понравится, что их система сама куда-то ШЕ> полезла и что-то скачала. Тех, кому не понравится, что принтер не работает, будет гораздо больше :) -- [-- Attachment #2: Type: application/pgp-signature, Size: 196 bytes --] ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-18 12:44 ` Mikhail Gusarov @ 2008-09-19 4:19 ` Шишков Евгений 2008-09-19 7:19 ` Анатолий Акатьев 2008-09-19 8:20 ` SKeeper 0 siblings, 2 replies; 46+ messages in thread From: Шишков Евгений @ 2008-09-19 4:19 UTC (permalink / raw) To: ALT Linux Community general discussions Mikhail Gusarov пишет: > Twas brillig at 16:16:48 18.09.2008 UTC+04 when evgen@svi.pp.ru did gyre and gimble: > > ШЕ> Анатолий Акатьев пишет: > ШЕ> Я уже думал об этом (вроде даже, на первый взгляд, это не сложно > ШЕ> реализовать). Только врят ли всем понравится, что их система сама куда-то > ШЕ> полезла и что-то скачала. > > Тех, кому не понравится, что принтер не работает, будет гораздо больше :) Вчера подправил скрипт загрузки прошивки. Теперь если прошивка не обнаруживается, то getweb лезет в инет, скачивает. Потом arm2hpdl конвертит, прошивка кладётся туда, где должна лежать и загружается в принтер. Всё без запросов и без участия пользователя. Всё, что проделывается видно в 12 консоли. Пока тестирую, потом надо несколько вопросов решить (например, если нет инета....), ну и потом, можно будет потестировать. ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-19 4:19 ` Шишков Евгений @ 2008-09-19 7:19 ` Анатолий Акатьев 2008-09-19 8:22 ` SKeeper ` (2 more replies) 2008-09-19 8:20 ` SKeeper 1 sibling, 3 replies; 46+ messages in thread From: Анатолий Акатьев @ 2008-09-19 7:19 UTC (permalink / raw) To: ALT Linux Community general discussions В сообщении от Friday 19 September 2008 10:19:35 Шишков Евгений написал(а): > Mikhail Gusarov пишет: > > Twas brillig at 16:16:48 18.09.2008 UTC+04 when evgen@svi.pp.ru did gyre > > and gimble: > > > > ШЕ> Анатолий Акатьев пишет: > > ШЕ> Я уже думал об этом (вроде даже, на первый взгляд, это не сложно > > ШЕ> реализовать). Только врят ли всем понравится, что их система сама > > куда-то ШЕ> полезла и что-то скачала. > > > > Тех, кому не понравится, что принтер не работает, будет гораздо больше :) > > Вчера подправил скрипт загрузки прошивки. Теперь если прошивка не > обнаруживается, то getweb лезет в инет, скачивает. Потом arm2hpdl > конвертит, прошивка кладётся туда, где должна лежать и загружается в > принтер. Всё без запросов и без участия пользователя. Всё, что > проделывается видно в 12 консоли. Пока тестирую, потом надо несколько > вопросов решить (например, если нет инета....), ну и потом, можно будет Прекрасно. Готов потестировать. У меня до понедельника принтер на руках будет HP P1005 Только я предлагаю лог положить куда-нибудь, чтобы можно было разобрать проблему. > потестировать. _______________________________________________ > community mailing list > community@lists.altlinux.org > https://lists.altlinux.org/mailman/listinfo/community -- С уважением Акатьев Анатолий. Руководитель отдела внедрения. тел.: 89509559748 icq : 190270141 www.master-system.ru ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-19 7:19 ` Анатолий Акатьев @ 2008-09-19 8:22 ` SKeeper 2008-09-19 17:41 ` Motsyo Gennadi aka Drool 2008-09-19 10:49 ` Шишков Евгений 2008-09-19 11:27 ` Шишков Евгений 2 siblings, 1 reply; 46+ messages in thread From: SKeeper @ 2008-09-19 8:22 UTC (permalink / raw) To: ALT Linux Community general discussions Анатолий Акатьев пишет: > Прекрасно. Готов потестировать. У меня до понедельника принтер на руках будет > HP P1005 > Только я предлагаю лог положить куда-нибудь, чтобы можно было разобрать > проблему. Кстати, присоединяюсь. Принтер стоит у меня и еще будет мне доступен достаточно долго. Поэтому готов потестировать. ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-19 8:22 ` SKeeper @ 2008-09-19 17:41 ` Motsyo Gennadi aka Drool 2008-09-20 3:47 ` Евгений 0 siblings, 1 reply; 46+ messages in thread From: Motsyo Gennadi aka Drool @ 2008-09-19 17:41 UTC (permalink / raw) To: ALT Linux Community general discussions SKeeper пишет: > Анатолий Акатьев пишет: >> Прекрасно. Готов потестировать. У меня до понедельника принтер на >> руках будет >> HP P1005 >> Только я предлагаю лог положить куда-нибудь, чтобы можно было >> разобрать проблему. > > Кстати, присоединяюсь. Принтер стоит у меня и еще будет мне доступен > достаточно долго. Поэтому готов потестировать. Как быть с теми пользователями, которые понятия не имеют про какие-то скрипты и какие-то консоли, не имеют (вообще или в данный момент выхода в интернет) и пытаются поставить драйвер, который должен работать, но почему-то молча не работает? Я бы в %post-скрипты будущего пакета всунул какое-то сообщение типа echo "Обязательно смотреть /usr/share/doc/чегототам/README.TXT". Такое вылазит даже в синаптике, не только в apt-get install. ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-19 17:41 ` Motsyo Gennadi aka Drool @ 2008-09-20 3:47 ` Евгений 2008-09-22 3:29 ` Denis Nazarov 0 siblings, 1 reply; 46+ messages in thread From: Евгений @ 2008-09-20 3:47 UTC (permalink / raw) To: ALT Linux Community general discussions Motsyo Gennadi aka Drool пишет: > SKeeper пишет: >> Анатолий Акатьев пишет: >>> Прекрасно. Готов потестировать. У меня до понедельника принтер на >>> руках будет >>> HP P1005 >>> Только я предлагаю лог положить куда-нибудь, чтобы можно было >>> разобрать проблему. >> >> Кстати, присоединяюсь. Принтер стоит у меня и еще будет мне доступен >> достаточно долго. Поэтому готов потестировать. > > Как быть с теми пользователями, которые понятия не имеют про > какие-то скрипты и какие-то консоли, не имеют (вообще или в данный > момент выхода в интернет) и пытаются поставить драйвер, который должен > работать, но почему-то молча не работает? > Я бы в %post-скрипты будущего пакета всунул какое-то сообщение типа > echo "Обязательно смотреть /usr/share/doc/чегототам/README.TXT". Такое > вылазит даже в синаптике, не только в apt-get install. При установке не буду ни чего выводить. Максимум в описание можно добавить... А у кого нет инета и прошивки - дока + инет у друга. Иного варианта и нет. ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-20 3:47 ` Евгений @ 2008-09-22 3:29 ` Denis Nazarov 2008-09-22 3:44 ` Евгений 0 siblings, 1 reply; 46+ messages in thread From: Denis Nazarov @ 2008-09-22 3:29 UTC (permalink / raw) To: ALT Linux Community general discussions В сообщении от Saturday 20 September 2008 09:47:50 Евгений написал(а): > При установке не буду ни чего выводить. Максимум в описание можно > добавить... А у кого нет инета и прошивки - дока + инет у друга. Иного > варианта и нет. а прошивку отдельным пакетом с зависимостью никак нельзя сделать? ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-22 3:29 ` Denis Nazarov @ 2008-09-22 3:44 ` Евгений 0 siblings, 0 replies; 46+ messages in thread From: Евгений @ 2008-09-22 3:44 UTC (permalink / raw) To: ALT Linux Community general discussions Denis Nazarov пишет: > В сообщении от Saturday 20 September 2008 09:47:50 Евгений написал(а): > >> При установке не буду ни чего выводить. Максимум в описание можно >> добавить... А у кого нет инета и прошивки - дока + инет у друга. Иного >> варианта и нет. > > а прошивку отдельным пакетом с зависимостью никак нельзя сделать? Нет. Нельзя. Лицензия понимаете ли.... ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-19 7:19 ` Анатолий Акатьев 2008-09-19 8:22 ` SKeeper @ 2008-09-19 10:49 ` Шишков Евгений 2008-09-19 10:56 ` Mikhail Gusarov ` (2 more replies) 2008-09-19 11:27 ` Шишков Евгений 2 siblings, 3 replies; 46+ messages in thread From: Шишков Евгений @ 2008-09-19 10:49 UTC (permalink / raw) To: ALT Linux Community general discussions Анатолий Акатьев пишет: >>> ШЕ> Анатолий Акатьев пишет: >>> ШЕ> Я уже думал об этом (вроде даже, на первый взгляд, это не сложно >>> ШЕ> реализовать). Только врят ли всем понравится, что их система сама >>> куда-то ШЕ> полезла и что-то скачала. >>> >>> Тех, кому не понравится, что принтер не работает, будет гораздо больше :) >> Вчера подправил скрипт загрузки прошивки. Теперь если прошивка не >> обнаруживается, то getweb лезет в инет, скачивает. Потом arm2hpdl >> конвертит, прошивка кладётся туда, где должна лежать и загружается в >> принтер. Всё без запросов и без участия пользователя. Всё, что >> проделывается видно в 12 консоли. Пока тестирую, потом надо несколько >> вопросов решить (например, если нет инета....), ну и потом, можно будет > > Прекрасно. Готов потестировать. У меня до понедельника принтер на руках будет > HP P1005 > Только я предлагаю лог положить куда-нибудь, чтобы можно было разобрать > проблему. Пока код не красивый совершенно (через жо...). Перенесу getweb в /usr/bin (чтоб доступен был), подправлю, соберу и выложу. Но всё уже сейчас работает. Провеил на HP1018 и на HP1020. Проблема в том, что надо какую-то проверку доступности интернета проводить, перед попыткой скачать прошивку. А вернее самого сайта foo2zjs. ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-19 10:49 ` Шишков Евгений @ 2008-09-19 10:56 ` Mikhail Gusarov 2008-09-19 11:04 ` Шишков Евгений 2008-09-19 18:18 ` Alexander Yereschenko 2008-09-23 10:00 ` SKeeper 2 siblings, 1 reply; 46+ messages in thread From: Mikhail Gusarov @ 2008-09-19 10:56 UTC (permalink / raw) To: ALT Linux Community general discussions [-- Attachment #1: Type: text/plain, Size: 372 bytes --] Twas brillig at 14:49:32 19.09.2008 UTC+04 when evgen@svi.pp.ru did gyre and gimble: ШЕ> Пока код не красивый совершенно (через жо...). ШЕ> Перенесу getweb в /usr/bin (чтоб доступен был), подправлю, соберу и выложу. Только переименовать бы ещё :) -- [-- Attachment #2: Type: application/pgp-signature, Size: 196 bytes --] ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-19 10:56 ` Mikhail Gusarov @ 2008-09-19 11:04 ` Шишков Евгений 0 siblings, 0 replies; 46+ messages in thread From: Шишков Евгений @ 2008-09-19 11:04 UTC (permalink / raw) To: ALT Linux Community general discussions Mikhail Gusarov пишет: > Twas brillig at 14:49:32 19.09.2008 UTC+04 when evgen@svi.pp.ru did gyre and gimble: > > ШЕ> Пока код не красивый совершенно (через жо...). > ШЕ> Перенесу getweb в /usr/bin (чтоб доступен был), подправлю, соберу и выложу. > > Только переименовать бы ещё :) Пока не буду трогать, т.к. в коде getweb много где встречается. Мне пока интересно проверить саму возможность... ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-19 10:49 ` Шишков Евгений 2008-09-19 10:56 ` Mikhail Gusarov @ 2008-09-19 18:18 ` Alexander Yereschenko 2008-09-20 3:49 ` Евгений 2008-09-23 10:00 ` SKeeper 2 siblings, 1 reply; 46+ messages in thread From: Alexander Yereschenko @ 2008-09-19 18:18 UTC (permalink / raw) To: ALT Linux Community general discussions Доброе! В сообщении от Friday 19 September 2008 13:49:32 Шишков Евгений написал(а): > Проблема в том, > что надо какую-то проверку доступности интернета проводить, перед попыткой > скачать прошивку. А вернее самого сайта foo2zjs. В качестве идеи: ping -c 1 foo2zjs.rkkda.com ; echo $? -- Alexander ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-19 18:18 ` Alexander Yereschenko @ 2008-09-20 3:49 ` Евгений 0 siblings, 0 replies; 46+ messages in thread From: Евгений @ 2008-09-20 3:49 UTC (permalink / raw) To: ALT Linux Community general discussions Alexander Yereschenko пишет: > Доброе! > В сообщении от Friday 19 September 2008 13:49:32 Шишков Евгений написал(а): >> Проблема в том, >> что надо какую-то проверку доступности интернета проводить, перед попыткой >> скачать прошивку. А вернее самого сайта foo2zjs. > > В качестве идеи: > ping -c 1 foo2zjs.rkkda.com ; echo $? :) А как Вы думаете, зачем я в зависимости тестового пакета iputils добавил? Именно так я и хотел проверку сделать. ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-19 10:49 ` Шишков Евгений 2008-09-19 10:56 ` Mikhail Gusarov 2008-09-19 18:18 ` Alexander Yereschenko @ 2008-09-23 10:00 ` SKeeper 2008-09-23 11:27 ` Шишков Евгений 2 siblings, 1 reply; 46+ messages in thread From: SKeeper @ 2008-09-23 10:00 UTC (permalink / raw) To: ALT Linux Community general discussions Шишков Евгений пишет: > Пока код не красивый совершенно (через жо...). > Перенесу getweb в /usr/bin (чтоб доступен был), подправлю, соберу и > выложу. > Но всё уже сейчас работает. Провеил на HP1018 и на HP1020. Проблема в > том, что надо какую-то проверку доступности интернета проводить, перед > попыткой скачать прошивку. А вернее самого сайта foo2zjs. HP P1005 - скрипт делает свое дело. Если getweb будет в /usr/bin, то может поправить документацию? ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-23 10:00 ` SKeeper @ 2008-09-23 11:27 ` Шишков Евгений 2008-09-24 4:21 ` SKeeper 0 siblings, 1 reply; 46+ messages in thread From: Шишков Евгений @ 2008-09-23 11:27 UTC (permalink / raw) To: ALT Linux Community general discussions SKeeper пишет: > Шишков Евгений пишет: >> Пока код не красивый совершенно (через жо...). >> Перенесу getweb в /usr/bin (чтоб доступен был), подправлю, соберу и >> выложу. >> Но всё уже сейчас работает. Провеил на HP1018 и на HP1020. Проблема в >> том, что надо какую-то проверку доступности интернета проводить, перед >> попыткой скачать прошивку. А вернее самого сайта foo2zjs. > > > HP P1005 - скрипт делает свое дело. Если getweb будет в /usr/bin, то > может поправить документацию? Дык пока это тест. Сейчас в devel обсуждаем нужно ли это вообще (в принципе решили, что нужно), и как это лучше сделать (тихо залезть на сайт foo2zjs и стянуть прошивку или пытаться как-то орать пользователю, что надо прошивку...). ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-23 11:27 ` Шишков Евгений @ 2008-09-24 4:21 ` SKeeper 0 siblings, 0 replies; 46+ messages in thread From: SKeeper @ 2008-09-24 4:21 UTC (permalink / raw) To: ALT Linux Community general discussions Шишков Евгений пишет: > SKeeper пишет: > > Дык пока это тест. > Сейчас в devel обсуждаем нужно ли это вообще (в принципе решили, что > нужно), и как это лучше сделать (тихо залезть на сайт foo2zjs и > стянуть прошивку или пытаться как-то орать пользователю, что надо > прошивку...). > Ну мое ИМХО за то, чтобы "орать пользователю". Что-то вроде: "Под Ваш принтер нужна проприетарная прошивка. Дальнейшие инструкции находятся в /usr/share/doc/foo2zjsxxx/README-UTF8.ALT". Думаю этого вполне достаточно. ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-19 7:19 ` Анатолий Акатьев 2008-09-19 8:22 ` SKeeper 2008-09-19 10:49 ` Шишков Евгений @ 2008-09-19 11:27 ` Шишков Евгений 2008-09-19 11:31 ` Шишков Евгений 2 siblings, 1 reply; 46+ messages in thread From: Шишков Евгений @ 2008-09-19 11:27 UTC (permalink / raw) To: ALT Linux Community general discussions Анатолий Акатьев пишет: > Прекрасно. Готов потестировать. У меня до понедельника принтер на руках будет > HP P1005 > Только я предлагаю лог положить куда-нибудь, чтобы можно было разобрать > проблему. Собрано под текущим сизифом (если что - есть srpm ;) ) Тестируйте. foo2zjs-20080914_test-alt3.src.rpm - http://www.rapidshare.ru/783734 foo2zjs-20080914_test-alt3.i586.rpm - http://www.rapidshare.ru/783738 foo2zjs-apps-20080914_test-alt3.i586.rpm - http://www.rapidshare.ru/783740 ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-19 11:27 ` Шишков Евгений @ 2008-09-19 11:31 ` Шишков Евгений 2008-09-21 11:31 ` Aleksander Gorohovski 0 siblings, 1 reply; 46+ messages in thread From: Шишков Евгений @ 2008-09-19 11:31 UTC (permalink / raw) To: ALT Linux Community general discussions Шишков Евгений пишет: > Анатолий Акатьев пишет: > >> Прекрасно. Готов потестировать. У меня до понедельника принтер на >> руках будет >> HP P1005 >> Только я предлагаю лог положить куда-нибудь, чтобы можно было >> разобрать проблему. > > Собрано под текущим сизифом (если что - есть srpm ;) ) Тестируйте. > > foo2zjs-20080914_test-alt3.src.rpm - http://www.rapidshare.ru/783734 > foo2zjs-20080914_test-alt3.i586.rpm - http://www.rapidshare.ru/783738 > foo2zjs-apps-20080914_test-alt3.i586.rpm - http://www.rapidshare.ru/783740 > Упустил. Тут пока ещё не реализована проверка доступности сервера (откуда качаются прошивки). Т.е. если нет инета и прошивки, то getweb запустится и будет долбиться к серверу. ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-19 11:31 ` Шишков Евгений @ 2008-09-21 11:31 ` Aleksander Gorohovski 2008-09-21 14:42 ` Евгений 0 siblings, 1 reply; 46+ messages in thread From: Aleksander Gorohovski @ 2008-09-21 11:31 UTC (permalink / raw) To: ALT Linux Community general discussions On Fri, 19 Sep 2008 14:31:47 +0300, Шишков Евгений wrote: > Шишков Евгений пишет: >> Анатолий Акатьев пишет: >> >>> Прекрасно. Готов потестировать. У меня до понедельника принтер на >>> руках будет >>> HP P1005 >>> Только я предлагаю лог положить куда-нибудь, чтобы можно было >>> разобрать проблему. >> Собрано под текущим сизифом (если что - есть srpm ;) ) Тестируйте. >> foo2zjs-20080914_test-alt3.src.rpm - http://www.rapidshare.ru/783734 >> foo2zjs-20080914_test-alt3.i586.rpm - http://www.rapidshare.ru/783738 >> foo2zjs-apps-20080914_test-alt3.i586.rpm - >> http://www.rapidshare.ru/783740 Ошибка! Невозможно подключиться к удаленному серверу > > Упустил. Тут пока ещё не реализована проверка доступности сервера > (откуда качаются прошивки). Т.е. если нет инета и прошивки, то getweb > запустится и будет долбиться к серверу. ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-21 11:31 ` Aleksander Gorohovski @ 2008-09-21 14:42 ` Евгений 0 siblings, 0 replies; 46+ messages in thread From: Евгений @ 2008-09-21 14:42 UTC (permalink / raw) To: ALT Linux Community general discussions Aleksander Gorohovski пишет: >>>> Прекрасно. Готов потестировать. У меня до понедельника принтер на >>>> руках будет >>>> HP P1005 >>>> Только я предлагаю лог положить куда-нибудь, чтобы можно было >>>> разобрать проблему. >>> Собрано под текущим сизифом (если что - есть srpm ;) ) Тестируйте. >>> foo2zjs-20080914_test-alt3.src.rpm - http://www.rapidshare.ru/783734 >>> foo2zjs-20080914_test-alt3.i586.rpm - http://www.rapidshare.ru/783738 >>> foo2zjs-apps-20080914_test-alt3.i586.rpm - >>> http://www.rapidshare.ru/783740 > > > Ошибка! > Невозможно подключиться к удаленному серверу Это кто говорит? ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-19 4:19 ` Шишков Евгений 2008-09-19 7:19 ` Анатолий Акатьев @ 2008-09-19 8:20 ` SKeeper 2008-09-19 10:04 ` Анатолий Акатьев 1 sibling, 1 reply; 46+ messages in thread From: SKeeper @ 2008-09-19 8:20 UTC (permalink / raw) To: ALT Linux Community general discussions Шишков Евгений пишет: > > Вчера подправил скрипт загрузки прошивки. Теперь если прошивка не > обнаруживается, то getweb лезет в инет, скачивает. Потом arm2hpdl > конвертит, прошивка кладётся туда, где должна лежать и загружается в > принтер. Всё без запросов и без участия пользователя. Всё, что > проделывается видно в 12 консоли. Пока тестирую, потом надо несколько > вопросов решить (например, если нет инета....), ну и потом, можно > будет потестировать. А Вы говорили лезь в /usr/share/doc... ;) Ну а если без ехидства, то рад, что в альте так оперативно реагируют на запросы пользователей! :) И Вам, Евгений, отдельное спасибо :) ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-19 8:20 ` SKeeper @ 2008-09-19 10:04 ` Анатолий Акатьев 2008-09-19 10:33 ` Шишков Евгений 0 siblings, 1 reply; 46+ messages in thread From: Анатолий Акатьев @ 2008-09-19 10:04 UTC (permalink / raw) To: ALT Linux Community general discussions В сообщении от Friday 19 September 2008 14:20:20 SKeeper написал(а): > Шишков Евгений пишет: > > Вчера подправил скрипт загрузки прошивки. Теперь если прошивка не > > обнаруживается, то getweb лезет в инет, скачивает. Потом arm2hpdl > > конвертит, прошивка кладётся туда, где должна лежать и загружается в > > принтер. Всё без запросов и без участия пользователя. Всё, что > > проделывается видно в 12 консоли. Пока тестирую, потом надо несколько > > вопросов решить (например, если нет инета....), ну и потом, можно > > будет потестировать. > > А Вы говорили лезь в /usr/share/doc... ;) > Ну а если без ехидства, то рад, что в альте так оперативно реагируют на > запросы пользователей! :) И Вам, Евгений, отдельное спасибо :) Присоединяюсь. К стати поймал такую штуку: настраивал через cups HP P1005 он подсоединен напрямую к компу через USB [root@atoll etc]# uname -a Linux atoll.EXPROF 2.6.25-std-def-alt1 #1 SMP Tue May 20 16:17:57 MSD 2008 i686 GNU/Linux [root@atoll etc]# rpm -qa | grep foo2 foo2zjs-20080914-alt2 [root@atoll etc]# принтер настроил. но заметил что печать идет только в тех приложения которые используют KDE-ную печать. Например в firefox - печать не идет. При попытке распечатать тестовую страницу принтер начинает индицировать, в jobs видно что идет подготовка к печати. Но ничего не печатается. Кто-нибудь сталкивался с этим? п > _______________________________________________ > community mailing list > community@lists.altlinux.org > https://lists.altlinux.org/mailman/listinfo/community -- С уважением Акатьев Анатолий. Руководитель отдела внедрения. тел.: 89509559748 icq : 190270141 www.master-system.ru ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] HP LJ p1005 2008-09-19 10:04 ` Анатолий Акатьев @ 2008-09-19 10:33 ` Шишков Евгений 0 siblings, 0 replies; 46+ messages in thread From: Шишков Евгений @ 2008-09-19 10:33 UTC (permalink / raw) To: ALT Linux Community general discussions Анатолий Акатьев пишет: > > принтер настроил. но заметил что печать идет только в тех приложения которые > используют KDE-ную печать. > Например в firefox - печать не идет. > При попытке распечатать тестовую страницу принтер начинает индицировать, в > jobs видно что идет подготовка к печати. > Но ничего не печатается. > Кто-нибудь сталкивался с этим? > п Скорее это проблема подсистемы печати, а не foo2zjs. УМВР. ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] foo2zjs-20080923-alt1 2008-09-15 7:29 ` Шишков Евгений 2008-09-15 7:33 ` Шишков Евгений @ 2008-09-25 7:41 ` Шишков Евгений 2008-09-25 8:44 ` Motsyo Gennadi aka Drool 1 sibling, 1 reply; 46+ messages in thread From: Шишков Евгений @ 2008-09-25 7:41 UTC (permalink / raw) To: ALT Linux Community general discussions, Sisyphus, devel Шишков Евгений пишет: > SKeeper пишет: >> Имеется данный принтер и Alt Linux 4.0 Desktop. Поставил пакет >> foo2zjs_20080826-alt1_i586.rpm, в котором указана поддержка данного >> принтера. >> foo2zjs потянул за собой psutils - поставил. >> Далее зашел в localhost:631 и добавил сабжевый принтер. После этого >> пускаю на >> печать... и облом ;( Что тестовая страница, что из ООо - все равно >> ниче не >> печатает. Если полезть посмотреть на задания печати этого принтера, то >> показывает, что все выполнено и напечатано. >> >> Подскажите плиз, в какую сторону копать. > > Вы прошивочку не положили. > 1) Запускаем консоль. Пишем "su -" и пароль рута. > 2) Идём /usr/share/doc/foo2zjs-20080826/ > 3) Запускаем: ./getweb p1005. Скачается прошивка sihpP1005.img. > 4) Далее выполняем: arm2hpdl sihpP1005.img > sihpP1005.dl > 5) Полученный файл sihpP1005.dl кладём в /usr/share/foo2zjs/firmware/ > 6) Выключаем и включаем принтер. Прошивка должна в него загрузиться. > 7) Печатаем. > foo2zjs-20080923-alt1 поехала в сизиф и в бранч 4.1. В этой версии добавлена автоматическая скачка прошивок принтеров при необходимости. Документация тоже обновлена. Просьба тестировать. ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] foo2zjs-20080923-alt1 2008-09-25 7:41 ` [Comm] foo2zjs-20080923-alt1 Шишков Евгений @ 2008-09-25 8:44 ` Motsyo Gennadi aka Drool 2008-09-25 9:13 ` Шишков Евгений 0 siblings, 1 reply; 46+ messages in thread From: Motsyo Gennadi aka Drool @ 2008-09-25 8:44 UTC (permalink / raw) To: ALT Linux Community general discussions Шишков Евгений пишет: > foo2zjs-20080923-alt1 поехала в сизиф и в бранч 4.1. > > В этой версии добавлена автоматическая скачка прошивок принтеров при > необходимости. > Документация тоже обновлена. > Просьба тестировать. Можно мне в личку src.rpm - попробую для 4.0 собрать - юзаю сетевой HP LJ1000. ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] foo2zjs-20080923-alt1 2008-09-25 8:44 ` Motsyo Gennadi aka Drool @ 2008-09-25 9:13 ` Шишков Евгений 2008-09-25 9:30 ` Motsyo Gennadi aka Drool 0 siblings, 1 reply; 46+ messages in thread From: Шишков Евгений @ 2008-09-25 9:13 UTC (permalink / raw) To: ALT Linux Community general discussions Motsyo Gennadi aka Drool пишет: > Шишков Евгений пишет: >> foo2zjs-20080923-alt1 поехала в сизиф и в бранч 4.1. >> >> В этой версии добавлена автоматическая скачка прошивок принтеров при >> необходимости. >> Документация тоже обновлена. >> Просьба тестировать. > > Можно мне в личку src.rpm - попробую для 4.0 собрать - юзаю сетевой > HP LJ1000. Насколько помню - для сетевого прошивка не нужна. ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] foo2zjs-20080923-alt1 2008-09-25 9:13 ` Шишков Евгений @ 2008-09-25 9:30 ` Motsyo Gennadi aka Drool 2008-09-25 9:31 ` Шишков Евгений 0 siblings, 1 reply; 46+ messages in thread From: Motsyo Gennadi aka Drool @ 2008-09-25 9:30 UTC (permalink / raw) To: ALT Linux Community general discussions Шишков Евгений пишет: >>> Просьба тестировать. >> >> Можно мне в личку src.rpm - попробую для 4.0 собрать - юзаю >> сетевой HP LJ1000. > > Насколько помню - для сетевого прошивка не нужна. Не нужна, но в 4.0 версия несколько старее, а во-вторых - вдруг и не только сетевой понадобится. ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [Comm] foo2zjs-20080923-alt1 2008-09-25 9:30 ` Motsyo Gennadi aka Drool @ 2008-09-25 9:31 ` Шишков Евгений 0 siblings, 0 replies; 46+ messages in thread From: Шишков Евгений @ 2008-09-25 9:31 UTC (permalink / raw) To: ALT Linux Community general discussions Motsyo Gennadi aka Drool пишет: > Шишков Евгений пишет: >>>> Просьба тестировать. >>> >>> Можно мне в личку src.rpm - попробую для 4.0 собрать - юзаю >>> сетевой HP LJ1000. >> >> Насколько помню - для сетевого прошивка не нужна. > > Не нужна, но в 4.0 версия несколько старее, а во-вторых - вдруг и не > только сетевой понадобится. ok. Я выслал Вам srpm. ^ permalink raw reply [flat|nested] 46+ messages in thread
end of thread, other threads:[~2008-09-25 9:31 UTC | newest] Thread overview: 46+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2008-09-15 6:58 [Comm] HP LJ p1005 SKeeper 2008-09-15 7:29 ` Шишков Евгений 2008-09-15 7:33 ` Шишков Евгений 2008-09-15 7:39 ` Victor Zhuravlyov 2008-09-16 4:31 ` SKeeper 2008-09-16 5:12 ` Шишков Евгений 2008-09-16 6:31 ` SKeeper 2008-09-16 6:50 ` Andrey Rahmatullin 2008-09-16 6:55 ` Шишков Евгений 2008-09-16 7:27 ` Maks Re 2008-09-16 7:59 ` Mikhail Gusarov 2008-09-16 8:08 ` Шишков Евгений 2008-09-16 8:11 ` Mikhail Gusarov 2008-09-16 8:27 ` Шишков Евгений 2008-09-16 8:29 ` Mikhail Gusarov 2008-09-16 8:36 ` Шишков Евгений 2008-09-18 12:05 ` Анатолий Акатьев 2008-09-18 12:16 ` Шишков Евгений 2008-09-18 12:44 ` Mikhail Gusarov 2008-09-19 4:19 ` Шишков Евгений 2008-09-19 7:19 ` Анатолий Акатьев 2008-09-19 8:22 ` SKeeper 2008-09-19 17:41 ` Motsyo Gennadi aka Drool 2008-09-20 3:47 ` Евгений 2008-09-22 3:29 ` Denis Nazarov 2008-09-22 3:44 ` Евгений 2008-09-19 10:49 ` Шишков Евгений 2008-09-19 10:56 ` Mikhail Gusarov 2008-09-19 11:04 ` Шишков Евгений 2008-09-19 18:18 ` Alexander Yereschenko 2008-09-20 3:49 ` Евгений 2008-09-23 10:00 ` SKeeper 2008-09-23 11:27 ` Шишков Евгений 2008-09-24 4:21 ` SKeeper 2008-09-19 11:27 ` Шишков Евгений 2008-09-19 11:31 ` Шишков Евгений 2008-09-21 11:31 ` Aleksander Gorohovski 2008-09-21 14:42 ` Евгений 2008-09-19 8:20 ` SKeeper 2008-09-19 10:04 ` Анатолий Акатьев 2008-09-19 10:33 ` Шишков Евгений 2008-09-25 7:41 ` [Comm] foo2zjs-20080923-alt1 Шишков Евгений 2008-09-25 8:44 ` Motsyo Gennadi aka Drool 2008-09-25 9:13 ` Шишков Евгений 2008-09-25 9:30 ` Motsyo Gennadi aka Drool 2008-09-25 9:31 ` Шишков Евгений
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git