* [Comm] Не работает 3D
@ 2008-08-29 6:20 s-damir
2008-08-29 6:26 ` Andrey Rahmatullin
2008-08-29 6:32 ` Denis Nazarov
0 siblings, 2 replies; 13+ messages in thread
From: s-damir @ 2008-08-29 6:20 UTC (permalink / raw)
To: ALT Linux Community general discussions
Здравствуйте! У меня такая проблема. Видеокарта HD2600XT AGP. Драйвер
стоит fglrx_glx 8.47.1-alt1. В описании к этому драйверу написано:
ATI/AMD Proprietary Linux Display Driver
AMD Proprietary Linux Display Driver.
This software suite support following ATI products:
* ATI Mobility(tm) and Integrated Product Family
* ATI Desktop and Integrated Product Family
* All-In-Wonder(tm) variants based on the above are also supported. Video
capture however is not supported.
The ATI Catalyst(tm) Linux software suite does not support ATI Workstation
products. AMD recommends using the AMD Proprietary Linux software driver
version <= 8.40.4. (Версия 8.40.4 не поддерживает мою карту.)
Проблема состоит в том, что не работает 3D.
Вот glxinfo:
[root@localhost ~]# glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: No (If you want to find out why, try setting
LIBGL_DEBUG=verbose)
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group,
GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
GLX_EXT_texture_from_pixmap
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.4 (2.1 Mesa 7.0.3)
OpenGL extensions:
GL_ARB_depth_texture, GL_ARB_draw_buffers, GL_ARB_fragment_program,
GL_ARB_imaging, GL_ARB_multisample, GL_ARB_multitexture,
GL_ARB_occlusion_query, GL_ARB_point_parameters, GL_ARB_point_sprite,
GL_ARB_shadow, GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
GL_ARB_texture_compression, GL_ARB_texture_cube_map,
GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3,
GL_ARB_texture_mirrored_repeat, GL_ARB_texture_non_power_of_two,
GL_ARB_texture_rectangle, GL_ARB_transpose_matrix,
GL_ARB_vertex_program,
GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_clip_volume_hint, GL_EXT_copy_texture,
GL_EXT_draw_range_elements,
GL_EXT_fog_coord, GL_EXT_framebuffer_object, GL_EXT_multi_draw_arrays,
GL_EXT_packed_pixels, GL_EXT_paletted_texture, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shadow_funcs,
GL_EXT_shared_texture_palette, GL_EXT_stencil_wrap, GL_EXT_subtexture,
GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias,
GL_EXT_texture_mirror_clamp, GL_EXT_texture_object,
GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels,
GL_ATI_draw_buffers, GL_ATI_texture_env_combine3,
GL_ATI_texture_mirror_once, GL_ATIX_texture_env_combine3,
GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate,
GL_MESA_pack_invert, GL_MESA_ycbcr_texture, GL_NV_blend_square,
GL_NV_fragment_program, GL_NV_light_max_exponent, GL_NV_point_sprite,
GL_NV_texgen_reflection, GL_NV_texture_rectangle, GL_NV_vertex_program,
GL_NV_vertex_program1_1, GL_SGI_color_matrix, GL_SGI_color_table,
GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_depth_texture,
GL_SGIX_shadow, GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x22 24 tc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x23 24 tc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x24 24 tc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x25 24 tc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
Вот xorg.conf:
Section "ServerLayout"
Identifier "Minimal layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "ImPS/2 Generic Wheel Mouse|0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
Load "freetype"
Load "glx"
Load "dri"
Load "dbe"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "ImPS/2 Generic Wheel Mouse|0"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "SyncMaster|0"
DisplaySize 340 270
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]|0"
DisplaySize 340 270
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
EndSection
Section "Device"
Identifier "Card0|0"
Driver "fglrx"
EndSection
Section "Device"
Identifier "Card0|1"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0|0"
Monitor "SyncMaster|0"
DefaultDepth 24
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600"
"720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600"
"720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600"
"720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600"
"720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600"
"720x400" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "Card0|0"
Monitor "aticonfig-Monitor[0]|0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600"
"720x400" "640x480"
EndSubSection
EndSection
Section "DRI"
Group "xgrp"
Mode 0660
EndSection
Вот glxgears:
3120 frames in 5.2 seconds = 602.856 FPS
3120 frames in 5.2 seconds = 603.348 FPS
3120 frames in 5.2 seconds = 603.035 FPS
3120 frames in 5.2 seconds = 602.821 FPS
3120 frames in 5.2 seconds = 602.791 FPS
3120 frames in 5.2 seconds = 603.317 FPS
3120 frames in 5.2 seconds = 602.936 FPS
3120 frames in 5.2 seconds = 603.687 FPS
3120 frames in 5.2 seconds = 602.838 FPS
3107 frames in 5.2 seconds = 602.257 FPS
3120 frames in 5.2 seconds = 603.250 FPS
3120 frames in 5.2 seconds = 602.899 FPS
3120 frames in 5.2 seconds = 602.571 FPS
2520 frames in 5.1 seconds = 490.267 FPS
2640 frames in 5.1 seconds = 521.696 FPS
3000 frames in 5.2 seconds = 582.142 FPS
2880 frames in 5.1 seconds = 565.537 FPS
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 570139 requests (520156 known processed) with 0 events
remaining.
Не работает 3D
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Comm] Не работает 3D
2008-08-29 6:20 [Comm] Не работает 3D s-damir
@ 2008-08-29 6:26 ` Andrey Rahmatullin
2008-08-29 8:45 ` s-damir
2008-08-29 6:32 ` Denis Nazarov
1 sibling, 1 reply; 13+ messages in thread
From: Andrey Rahmatullin @ 2008-08-29 6:26 UTC (permalink / raw)
To: community
[-- Attachment #1: Type: text/plain, Size: 598 bytes --]
On Fri, Aug 29, 2008 at 12:20:07PM +0600, s-damir wrote:
> Здравствуйте! У меня такая проблема. Видеокарта HD2600XT AGP. Драйвер
> стоит fglrx_glx 8.47.1-alt1. В описании к этому драйверу написано:
А ядерный модуль той же версии стоит?
> direct rendering: No (If you want to find out why, try setting
> LIBGL_DEBUG=verbose)
Для кого пишут, а?
--
WBR, wRAR (ALT Linux Team)
Powered by the ALT Linux fortune(8):
> Все должно в utf-8 работать. Второй GTK как раз кучу проблем с этим решил.
Решить-то он решил, но программы под GTK2 нужно писать правильно. :-)
-- abr in devel@
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Comm] Не работает 3D
2008-08-29 6:20 [Comm] Не работает 3D s-damir
2008-08-29 6:26 ` Andrey Rahmatullin
@ 2008-08-29 6:32 ` Denis Nazarov
2008-08-29 9:02 ` Denis Nazarov
1 sibling, 1 reply; 13+ messages in thread
From: Denis Nazarov @ 2008-08-29 6:32 UTC (permalink / raw)
To: ALT Linux Community general discussions
В сообщении от Friday 29 August 2008 12:20:07 s-damir написал(а):
> Здравствуйте! У меня такая проблема. Видеокарта HD2600XT AGP. Драйвер
> стоит fglrx_glx 8.47.1-alt1. В описании к этому драйверу написано:
нужен драйвер 8.50, у меня на HD2600 только так заработало
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Comm] Не работает 3D
2008-08-29 6:26 ` Andrey Rahmatullin
@ 2008-08-29 8:45 ` s-damir
2008-08-29 8:58 ` Denis Nazarov
2008-08-29 9:25 ` Andrey Rahmatullin
0 siblings, 2 replies; 13+ messages in thread
From: s-damir @ 2008-08-29 8:45 UTC (permalink / raw)
To: ALT Linux Community general discussions
Andrey Rahmatullin пишет:
> On Fri, Aug 29, 2008 at 12:20:07PM +0600, s-damir wrote:
>
>> Здравствуйте! У меня такая проблема. Видеокарта HD2600XT AGP. Драйвер
>> стоит fglrx_glx 8.47.1-alt1. В описании к этому драйверу написано:
>>
> А ядерный модуль той же версии стоит?
>
>
А как это проверить?
Вот ещё xorg.0.log, если прояснит какие-нибудь детали:
X Window System Version 7.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 7.3
Build Operating System: Linux 2.6.18-ovz-smp-alt24 i686
2.6.18-ovz-smp-alt24 i686
Current Operating System: Linux localhost.localdomain
2.6.18-std-smp-alt7 #1 SMP Sat Aug 4 00:07:54 MSD 2007 i686
Build Date: 12 June 2008
Before reporting problems, check https://bugzilla.altlinux.org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 29 11:19:20 2008
(==) Using config file: "/root/xorg.conf"
(==) ServerLayout "Minimal layout"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "SyncMaster|0"
(**) | |-->Device "Card0|0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "ImPS/2 Generic Wheel Mouse|0"
(WW) No FontPath specified. Using compiled-in default.
(==) FontPath set to:
/usr/share/fonts/bitmap/misc/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/X11/modules"
(II) Loader magic: 0x81f0280
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.2
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/X11/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2570 card 1458,2570 rev 02 class 06,00,00
hdr 00
(II) PCI: 00:01:0: chip 8086,2571 card 0000,0000 rev 02 class 06,04,00
hdr 01
(II) PCI: 00:1d:0: chip 8086,24d2 card 1458,24d2 rev 02 class 0c,03,00
hdr 80
(II) PCI: 00:1d:1: chip 8086,24d4 card 1458,24d2 rev 02 class 0c,03,00
hdr 00
(II) PCI: 00:1d:2: chip 8086,24d7 card 1458,24d2 rev 02 class 0c,03,00
hdr 00
(II) PCI: 00:1d:3: chip 8086,24de card 1458,24d2 rev 02 class 0c,03,00
hdr 00
(II) PCI: 00:1d:7: chip 8086,24dd card 1458,5006 rev 02 class 0c,03,20
hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev c2 class 06,04,00
hdr 01
(II) PCI: 00:1f:0: chip 8086,24d0 card 0000,0000 rev 02 class 06,01,00
hdr 80
(II) PCI: 00:1f:1: chip 8086,24db card 1458,24d2 rev 02 class 01,01,8a
hdr 00
(II) PCI: 00:1f:2: chip 8086,24d1 card 1458,24d1 rev 02 class 01,01,8f
hdr 00
(II) PCI: 00:1f:3: chip 8086,24d3 card 1458,24d2 rev 02 class 0c,05,00
hdr 00
(II) PCI: 00:1f:5: chip 8086,24d5 card 1458,a002 rev 02 class 04,01,00
hdr 00
(II) PCI: 01:00:0: chip 1002,9586 card 174b,0028 rev 00 class 03,00,00
hdr 00
(II) PCI: 02:08:0: chip 8086,1050 card 1458,3013 rev 02 class 02,00,00
hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00009000 - 0x000090ff (0x100) IX[B]
[1] -1 0 0x00009400 - 0x000094ff (0x100) IX[B]
[2] -1 0 0x00009800 - 0x000098ff (0x100) IX[B]
[3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xf8000000 - 0xf9ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is
cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xfa000000 - 0xfa0fffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x9586) rev 0,
Mem @ 0xe0000000/28, 0xf9000000/16, I/O @ 0x9000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf0000000 from 0xf7ffffff to
0xefffffff......................
..................(II) LoadModule: "freetype"
(II) Loading /usr/lib/X11/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.3.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/X11/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/X11/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/X11/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/X11/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.3.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "vesa"
(II) Loading /usr/lib/X11/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 7.3.0, module version = 1.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.2
(II) LoadModule: "kbd"
(II) Loading /usr/lib/X11/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.1.99.903, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/lib/X11/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.1.99.902, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset vesa found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B].........
.........(II) Setting vga for screen 0.
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/X11/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.3.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.2
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/X11/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.3.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.2
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 16384 kB
(II) VESA(0): VESA VBE OEM: ATI ATOMBIOS
(II) VESA(0): VESA VBE OEM Software Rev: 10.59
(II) VESA(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) VESA(0): VESA VBE OEM Product: RV630
(II) VESA(0): VESA VBE OEM Product Rev: 01.00
(**) VESA(0): Depth 24, (--) framebuffer bpp 32
(==) VESA(0): RGB weight 888
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module already built-in
(II) VESA(0): VESA VBE DDC supported
(II) VESA(0): VESA VBE DDC Level 2
(II) VESA(0): VESA VBE DDC transfer in appr. 1 sec.
(II) VESA(0): VESA VBE DDC read successfully
(II) VESA(0): Manufacturer: SAM Model: 10b Serial#: 1196634423
(II) VESA(0): Year: 2004 Week: 41
(II) VESA(0): EDID Version: 1.3
(II) VESA(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) VESA(0): Sync: Separate Composite
(II) VESA(0): Max H-Image Size [cm]: horiz.: 34 vert.: 27
(II) VESA(0): Gamma: 2.20
(II) VESA(0): DPMS capabilities: Off; RGB/Color Display
(II) VESA(0): First detailed timing is preferred mode
(II) VESA(0): redX: 0.633 redY: 0.351 greenX: 0.298 greenY: 0.592
(II) VESA(0): blueX: 0.143 blueY: 0.092 whiteX: 0.316 whiteY: 0.337
(II) VESA(0): Supported VESA Video Modes:
(II) VESA(0): 720x400@70Hz
(II) VESA(0): 640x480@60Hz
(II) VESA(0): 640x480@67Hz
(II) VESA(0): 640x480@72Hz
(II) VESA(0): 640x480@75Hz
(II) VESA(0): 800x600@56Hz
(II) VESA(0): 800x600@60Hz
(II) VESA(0): 800x600@72Hz
(II) VESA(0): 800x600@75Hz
(II) VESA(0): 832x624@75Hz
(II) VESA(0): 1024x768@60Hz
(II) VESA(0): 1024x768@70Hz
(II) VESA(0): 1024x768@75Hz
(II) VESA(0): 1280x1024@75Hz
(II) VESA(0): 1152x870@75Hz
(II) VESA(0): Manufacturer's mask: 0
(II) VESA(0): Supported Future Video Modes:
(II) VESA(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) VESA(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) VESA(0): Supported additional Video Mode:
(II) VESA(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) VESA(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end
1688 h_border: 0
(II) VESA(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking:
1066 v_border: 0
(II) VESA(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz,
PixClock max 140 MHz
(II) VESA(0): Monitor name: SyncMaster
(II) VESA(0): Serial No: HDDXA02030
(II) VESA(0): EDID (in hex):
(II) VESA(0): 00ffffffffffff004c2d0b0137315347
(II) VESA(0): 290e01036c221b782a36a1a2594c9724
(II) VESA(0): 175156bfef808180714f010101010101
(II) VESA(0): 010101010101302a009851002a403070
(II) VESA(0): 1300520e1100001e000000fd00384b1e
(II) VESA(0): 510e000a202020202020000000fc0053
(II) VESA(0): 796e634d61737465720a2020000000ff
(II) VESA(0): 00484444584130323033300a202000bb
(II) VESA(0): Using hsync ranges from config file
(II) VESA(0): Using vrefresh ranges from config file
(II) VESA(0): Printing DDC gathered Modelines:
(II) VESA(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync
(II) VESA(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603
625 +hsync +vsync
(II) VESA(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484
500 -hsync -vsync
(II) VESA(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491
520 -hsync -vsync
(II) VESA(0): Modeline "640x480" 30.24 640 704 768 864 480 483 486
525 -hsync -vsync
(II) VESA(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492
525 -hsync -vsync
(II) VESA(0): Modeline "720x400" 28.32 720 738 846 900 400 412 414
449 -hsync +vsync
(II) VESA(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024
1025 1028 1066 +hsync +vsync
(II) VESA(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769
772 800 +hsync +vsync
(II) VESA(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771
777 806 -hsync -vsync
(II) VESA(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync
(II) VESA(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628
667 -hsync -vsync
(II) VESA(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604
625 +hsync +vsync
(II) VESA(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643
666 +hsync +vsync
(II) VESA(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865
868 900 +hsync +vsync
(II) VESA(0): Modeline "1280x1024" 109.00 1280 1368 1496 1712 1024
1027 1034 1063 -hsync +vsync
(II) VESA(0): Modeline "1152x864" 104.00 1152 1224 1344 1536 864 867
871 905 -hsync +vsync
(II) VESA(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024
1025 1028 1066 +hsync +vsync
(II) VESA(0): Searching for matching VESA mode(s):.................
..................(II) VESA(0): Total Memory: 256 64KB banks (16384kB)
(II) VESA(0): SyncMaster|0: Using hsync range of 30.00-81.00 kHz
(II) VESA(0): SyncMaster|0: Using vrefresh range of 56.00-75.00 Hz
(II) VESA(0): Not using mode "832x624" (no mode of this name)
(II) VESA(0): Not using built-in mode "1400x1050" (width too large for
virtual size)
(--) VESA(0): Virtual size is 1280x1024 (pitch 1280)
(**) VESA(0): *Built-in mode "1280x1024"
(**) VESA(0): *Built-in mode "1152x864"
(**) VESA(0): *Built-in mode "1024x768"
(**) VESA(0): *Built-in mode "800x600"
(**) VESA(0): *Built-in mode "720x400"
(**) VESA(0): *Built-in mode "640x480"
(**) VESA(0): Built-in mode "1280x1024"
(**) VESA(0): Display dimensions: (340, 270) mm
(**) VESA(0): DPI set to (95, 96)
(II) VESA(0): Attempting to use 75Hz refresh for mode "1280x1024" (166)
(II) VESA(0): Attempting to use 75Hz refresh for mode "1152x864" (156)
(II) VESA(0): Attempting to use 75Hz refresh for mode "1024x768" (123)
(II) VESA(0): Attempting to use 72Hz refresh for mode "800x600" (122)
(II) VESA(0): Attempting to use 70Hz refresh for mode "720x400" (136)
(II) VESA(0): Attempting to use 73Hz refresh for mode "640x480" (121)
(II) VESA(0): Attempting to use 75Hz refresh for mode "1280x1024" (124)
(**) VESA(0): Using "Shadow Framebuffer"
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/X11/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 7.3.0, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/X11/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.3.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfa000000 - 0xfa000fff (0x1000) MX[B]
[5] -1 0 0xfa102000 - 0xfa1020ff (0x100) MX[B]
[6] -1 0 0xfa101000 - 0xfa1011ff (0x200) MX[B]
[7] -1 0 0x88000000 - 0x880003ff (0x400) MX[B]
[8] -1 0 0xfa100000 - 0xfa1003ff (0x400) MX[B]
[9] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[10] -1 0 0xf9000000 - 0xf900ffff (0x10000) MX[B](B)
[11] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000a000 - 0x0000a03f (0x40) IX[B]
[18] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
[19] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[20] -1 0 0x00001400 - 0x0000141f (0x20) IX[B]
[21] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
[22] -1 0 0x0000cc00 - 0x0000cc03 (0x4) IX[B]
[23] -1 0 0x0000c800 - 0x0000c807 (0x8) IX[B]
[24] -1 0 0x0000c400 - 0x0000c403 (0x4) IX[B]
[25] -1 0 0x0000c000 - 0x0000c007 (0x8) IX[B]
[26] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[27] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B]
[28] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B]
[29] -1 0 0x0000b000 - 0x0000b01f (0x20) IX[B]
[30] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B]
[31] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
[32] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[33] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/X11/modules//libint10.so
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 16384 kB
(II) VESA(0): VESA VBE OEM: ATI ATOMBIOS
(II) VESA(0): VESA VBE OEM Software Rev: 10.59
(II) VESA(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) VESA(0): VESA VBE OEM Product: RV630
(II) VESA(0): VESA VBE OEM Product Rev: 01.00
(==) VESA(0): Write-combining range (0xe0000000,0x1000000)
(II) VESA(0): virtual address = 0xb6b4c000,
physical address = 0xe0000000, size = 16777216
(II) VESA(0): VBESetVBEMode failed...Tried again without customized values.
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Backing store disabled
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/X11/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.3.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "IMPS/2"
(**) ImPS/2 Generic Wheel Mouse|0: Device: "/dev/input/mice"
(**) ImPS/2 Generic Wheel Mouse|0: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) ImPS/2 Generic Wheel Mouse|0: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) ImPS/2 Generic Wheel Mouse|0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) ImPS/2 Generic Wheel Mouse|0: ZAxisMapping: buttons 4 and 5
(**) ImPS/2 Generic Wheel Mouse|0: Buttons: 9
(II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse|0"
(type: MOUSE)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) ImPS/2 Generic Wheel Mouse|0: ps2EnableDataReporting: succeeded
(II) 3rd Button detected: disabling emulate3Button
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Comm] Не работает 3D
2008-08-29 8:45 ` s-damir
@ 2008-08-29 8:58 ` Denis Nazarov
2008-08-29 9:25 ` Andrey Rahmatullin
1 sibling, 1 reply; 13+ messages in thread
From: Denis Nazarov @ 2008-08-29 8:58 UTC (permalink / raw)
To: ALT Linux Community general discussions
В сообщении от Friday 29 August 2008 14:45:01 s-damir написал(а):
> А как это проверить?
rpm -qa | grep fglrx
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Comm] Не работает 3D
2008-08-29 6:32 ` Denis Nazarov
@ 2008-08-29 9:02 ` Denis Nazarov
0 siblings, 0 replies; 13+ messages in thread
From: Denis Nazarov @ 2008-08-29 9:02 UTC (permalink / raw)
To: ALT Linux Community general discussions
В сообщении от Friday 29 August 2008 12:32:07 Denis Nazarov написал(а):
> нужен драйвер 8.50, у меня на HD2600 только так заработало
глубоко извиняюсь за поспешность, но на самом деле это не так :)
[denis@buka ~]$ rpm -qa|grep fglrx
fglrx-tools-8.47.1-alt1
kernel-modules-fglrx-std-def-1.0.8.47.1-alt2.132633.6.M41.1
fglrx_glx-8.47.1-alt1
kernel-modules-fglrx-std-def-1.0.8.47.1-alt1.132632.9
все отлично работает
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Comm] Не работает 3D
2008-08-29 8:45 ` s-damir
2008-08-29 8:58 ` Denis Nazarov
@ 2008-08-29 9:25 ` Andrey Rahmatullin
2008-08-29 9:42 ` s-damir
1 sibling, 1 reply; 13+ messages in thread
From: Andrey Rahmatullin @ 2008-08-29 9:25 UTC (permalink / raw)
To: community
On Fri, Aug 29, 2008 at 02:45:01PM +0600, s-damir wrote:
> А как это проверить?
Зачем? У вас vesa в xorg.conf, какой тут fglrx?
> (II) LoadModule: "vesa"
>
> (II) Loading /usr/lib/X11/modules/drivers//vesa_drv.so
> (II) Module vesa: vendor="X.Org Foundation"
> compiled for 7.3.0, module version = 1.3.0
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 1.2
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Comm] Не работает 3D
@ 2008-08-29 9:35 ` s-damir
2008-08-29 9:51 ` Denis Nazarov
0 siblings, 1 reply; 13+ messages in thread
From: s-damir @ 2008-08-29 9:35 UTC (permalink / raw)
To: ALT Linux Community general discussions
s-damir пишет:
> Denis Nazarov пишет:
>> В сообщении от Friday 29 August 2008 14:45:01 s-damir написал(а):
>>
>>> А как это проверить?
>>>
>>
>> rpm -qa | grep fglrx
>> _______________________________________________
>> community mailing list
>> community@lists.altlinux.org
>> https://lists.altlinux.org/mailman/listinfo/community
kernel-source-fglrx-8.47.1-8.47.1-alt1
kernel-modules-fglrx-std-smp-1.0.8.39.4-alt1.132626.7
kernel-modules-fglrx-wks-smp-1.0.8.39.4-alt1.132626.2
fglrx_glx-8.47.1-alt1
Выходит, что мне нужно установить kernel-modules-fglrx-std-smp,
kernel-modules-fglrx-wks-smp версии 8.47.1. Но у меня в Synaptice есть
четыре kernel-modules-fglrx-std-smp:
kernel-modules-fglrx-std-smp#1.0.8.39.4-alt1.132626.7 ATI video card
drivers,
kernel-modules-fglrx-std-smp#1.0.8.40.4-alt1.132626.10 ATI video
card drivers
kernel-modules-fglrx-std-smp#1.0.8.47.1-alt1.132626.12.M40.1 AMD/ATI
Proprietary Linux Display Driver
kernel-modules-fglrx-std-smp#1.0.8.47.1-alt1.132626.12.M40.3 AMD/ATI
Proprietary Linux Display Driver
Какой из них ставить? А kernel-modules-fglrx-wks-smp только версии 8.40.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Comm] Не работает 3D
2008-08-29 9:25 ` Andrey Rahmatullin
@ 2008-08-29 9:42 ` s-damir
2008-08-29 9:46 ` Yuri Bushmelev
0 siblings, 1 reply; 13+ messages in thread
From: s-damir @ 2008-08-29 9:42 UTC (permalink / raw)
To: ALT Linux Community general discussions
Andrey Rahmatullin пишет:
> On Fri, Aug 29, 2008 at 02:45:01PM +0600, s-damir wrote:
>
>> А как это проверить?
>>
> Зачем? У вас vesa в xorg.conf, какой тут fglrx?
>
>> (II) LoadModule: "vesa"
>>
>> (II) Loading /usr/lib/X11/modules/drivers//vesa_drv.so
>> (II) Module vesa: vendor="X.Org Foundation"
>> compiled for 7.3.0, module version = 1.3.0
>> Module class: X.Org Video Driver
>> ABI class: X.Org Video Driver, version 1.2
>>
> _______________________________________________
> community mailing list
> community@lists.altlinux.org
> https://lists.altlinux.org/mailman/listinfo/community
Однако в /etc/X11/xorg.conf написано
Section "Monitor"
Identifier "aticonfig-Monitor[0]|0"
DisplaySize 340 270
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
EndSection
Section "Device"
Identifier "Card0|0"
Driver "fglrx"
EndSection
Section "Device"
Identifier "Card0|1"
Driver "fglrx".
Почему такой бардак и какой файл прав?
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Comm] Не работает 3D
2008-08-29 9:42 ` s-damir
@ 2008-08-29 9:46 ` Yuri Bushmelev
2008-08-29 10:10 ` Владимир Гусев
2008-08-29 12:16 ` Michael Shigorin
0 siblings, 2 replies; 13+ messages in thread
From: Yuri Bushmelev @ 2008-08-29 9:46 UTC (permalink / raw)
To: ALT Linux Community general discussions
В сообщении от Пятница 29 августа 2008 s-damir написал(a):
> Однако в /etc/X11/xorg.conf написано
[skip]
> Почему такой бардак и какой файл прав?
В лог посмотрите внимательнее:
(==) Using config file: "/root/xorg.conf"
Я как-то тоже находился по этим граблям.. Теперь всегда в логе смотрю, какой
конфиг реально используется :)
--
С уважением,
Бушмелев Юрий
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Comm] Не работает 3D
2008-08-29 9:35 ` s-damir
@ 2008-08-29 9:51 ` Denis Nazarov
0 siblings, 0 replies; 13+ messages in thread
From: Denis Nazarov @ 2008-08-29 9:51 UTC (permalink / raw)
To: ALT Linux Community general discussions
В сообщении от Friday 29 August 2008 15:35:33 s-damir написал(а):
> kernel-source-fglrx-8.47.1-8.47.1-alt1
> kernel-modules-fglrx-std-smp-1.0.8.39.4-alt1.132626.7
> kernel-modules-fglrx-wks-smp-1.0.8.39.4-alt1.132626.2
> fglrx_glx-8.47.1-alt1
> Выходит, что мне нужно установить kernel-modules-fglrx-std-smp,
> kernel-modules-fglrx-wks-smp версии 8.47.1. Но у меня в Synaptice есть
> четыре kernel-modules-fglrx-std-smp:
> kernel-modules-fglrx-std-smp#1.0.8.39.4-alt1.132626.7 ATI video card
> drivers,
> kernel-modules-fglrx-std-smp#1.0.8.40.4-alt1.132626.10 ATI video
> card drivers
> kernel-modules-fglrx-std-smp#1.0.8.47.1-alt1.132626.12.M40.1 AMD/ATI
> Proprietary Linux Display Driver
> kernel-modules-fglrx-std-smp#1.0.8.47.1-alt1.132626.12.M40.3 AMD/ATI
> Proprietary Linux Display Driver
> Какой из них ставить? А kernel-modules-fglrx-wks-smp только версии 8.40.
я так думаю, что последний. Но, опять же, ядро какое?
Если -std-smp, то последний модуль в самый раз
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Comm] Не работает 3D
2008-08-29 9:46 ` Yuri Bushmelev
@ 2008-08-29 10:10 ` Владимир Гусев
2008-08-29 12:16 ` Michael Shigorin
1 sibling, 0 replies; 13+ messages in thread
From: Владимир Гусев @ 2008-08-29 10:10 UTC (permalink / raw)
To: community
> > Однако в /etc/X11/xorg.conf написано
> [skip]
> > Почему такой бардак и какой файл прав?
>
> В лог посмотрите внимательнее:
> (==) Using config file: "/root/xorg.conf"
>
> Я как-то тоже находился по этим граблям.. Теперь всегда в логе
> смотрю, какой конфиг реально используется :)
>
Если в рабочих каталогах есть xorg.conf - конфиг из /etc/X11 не
воспринимается. Удалите из /root файл xorg.conf (или сохраните в доугом
месте, если нужен) и будет хвататься /etc/X11/xorg.conf.
--
С уважением,
Владимир Гусев
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [Comm] Не работает 3D
2008-08-29 9:46 ` Yuri Bushmelev
2008-08-29 10:10 ` Владимир Гусев
@ 2008-08-29 12:16 ` Michael Shigorin
1 sibling, 0 replies; 13+ messages in thread
From: Michael Shigorin @ 2008-08-29 12:16 UTC (permalink / raw)
To: ALT Linux Community general discussions; +Cc: Stanislav Ievlev
On Fri, Aug 29, 2008 at 01:46:45PM +0400, Yuri Bushmelev wrote:
> > Однако в /etc/X11/xorg.conf написано
> [skip]
> > Почему такой бардак и какой файл прав?
>
> В лог посмотрите внимательнее:
> (==) Using config file: "/root/xorg.conf"
>
> Я как-то тоже находился по этим граблям.. Теперь всегда в логе
> смотрю, какой конфиг реально используется :)
Надо бы проверку на этот любимый вариант в alterator-x11
добавить. С предупреждением.
--
---- WBR, Michael Shigorin <mike@altlinux.ru>
------ Linux.Kiev http://www.linux.kiev.ua/
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2008-08-29 12:16 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-08-29 6:20 [Comm] Не работает 3D s-damir
2008-08-29 6:26 ` Andrey Rahmatullin
2008-08-29 8:45 ` s-damir
2008-08-29 8:58 ` Denis Nazarov
2008-08-29 9:35 ` s-damir
2008-08-29 9:51 ` Denis Nazarov
2008-08-29 9:25 ` Andrey Rahmatullin
2008-08-29 9:42 ` s-damir
2008-08-29 9:46 ` Yuri Bushmelev
2008-08-29 10:10 ` Владимир Гусев
2008-08-29 12:16 ` Michael Shigorin
2008-08-29 6:32 ` Denis Nazarov
2008-08-29 9:02 ` Denis Nazarov
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git