From: Alexander <shurikx1@mail.ru>
To: community@lists.altlinux.org
Subject: [Comm] проблема с чтением флешки
Date: Fri, 8 Aug 2008 22:16:10 +0400
Message-ID: <20080808221610.7924c145@skeo.skeo> (raw)
Здравствуйте!
Подключил с помощью кард-ридера SD-карточку Patriot 2ГБ. Пытаюсь просмотреть
через gthumb фотки с отдыха - читает только часть. При копировании с карты
на диск пишет
В tail -f /var/log/all.log пишет:
Aug 8 21:52:46 kernel: attempt to access beyond end of device
Aug 8 21:52:46 kernel: sdc: rw=0, want=2237127, limit=1992704
При этом на ноутбуке все читается нормально. Пробовал другую карту подключать -
то же самое. Как можно исправить?
Дополнительная информация:
# uname -r
2.6.25-std-pae-alt7
Сизиф обновлял несколько раз - не помогло :((
в /etc/fstab такие опции монтирования:
/dev/sdc1 /mnt/flash3 subfs
fs=vfat,iocharset=koi8-r,auto,umask=0,sync,quiet,noexec,user,nodev,nosuid,sync 0 0
# lsmod|grep hci
ohci_hcd 31108 0
ehci_hcd 40844 0
ssb 43908 1 ohci_hcd
usbcore 151024 7 usb_storage,libusual,cxacru,usbatm,ohci_hcd,ehci_hcd
# lsmod|grep usb
usb_storage 76736 1
libusual 23208 1 usb_storage
usbatm 23552 2 cxacru
atm 47540 4 br2684,usbatm
usbcore 151024 7 usb_storage,libusual,cxacru,usbatm,ohci_hcd,ehci_hcd
scsi_mod 155052 4 sg,usb_storage,libata,sd_mod
При подключении кард-ридера в /var/log/all.log писалось:
Aug 8 21:51:15 skeo kernel: usb 1-4: new high speed USB device using ehci_hcd and address 4
Aug 8 21:51:15 skeo kernel: usb 1-4: configuration #1 chosen from 1 choice
Aug 8 21:51:15 skeo kernel: scsi3 : SCSI emulation for USB Mass Storage devices
Aug 8 21:51:15 skeo kernel: usb 1-4: New USB device found, idVendor=0aec, idProduct=3260
Aug 8 21:51:15 skeo kernel: usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Aug 8 21:51:15 skeo kernel: usb 1-4: Product: USB Storage Device
Aug 8 21:51:15 skeo kernel: usb 1-4: Manufacturer: Generic
Aug 8 21:51:15 skeo kernel: usb 1-4: SerialNumber: 0AEC326000001A000
Aug 8 21:51:15 skeo kernel: usb-storage: device found at 4
Aug 8 21:51:15 skeo kernel: usb-storage: waiting for device to settle before scanning
Aug 8 21:51:16 skeo kernel: scsi 3:0:0:0: Direct-Access Generic USB Storage-CFC I19A PQ: 0 ANSI: 0 CCS
Aug 8 21:51:16 skeo kernel: sd 3:0:0:0: [sdb] Attached SCSI removable disk
Aug 8 21:51:16 skeo kernel: sd 3:0:0:0: Attached scsi generic sg1 type 0
Aug 8 21:51:16 skeo kernel: scsi 3:0:0:1: Direct-Access Generic USB Storage-SDC I19A PQ: 0 ANSI: 0 CCS
Aug 8 21:51:16 skeo kernel: sd 3:0:0:1: [sdc] 1992704 512-byte hardware sectors (1020 MB)
Aug 8 21:51:16 skeo kernel: sd 3:0:0:1: [sdc] Write Protect is off
Aug 8 21:51:16 skeo kernel: sd 3:0:0:1: [sdc] Mode Sense: 03 00 00 00
Aug 8 21:51:16 skeo kernel: sd 3:0:0:1: [sdc] Assuming drive cache: write through
Aug 8 21:51:16 skeo kernel: sd 3:0:0:1: [sdc] 1992704 512-byte hardware sectors (1020 MB)
Aug 8 21:51:16 skeo kernel: sd 3:0:0:1: [sdc] Write Protect is off
Aug 8 21:51:16 skeo kernel: sd 3:0:0:1: [sdc] Mode Sense: 03 00 00 00
Aug 8 21:51:16 skeo kernel: sd 3:0:0:1: [sdc] Assuming drive cache: write through
Aug 8 21:51:16 skeo kernel: sdc: sdc1
Aug 8 21:51:16 skeo kernel: sdc: p1 exceeds device capacity
Aug 8 21:51:16 skeo kernel: sd 3:0:0:1: [sdc] Attached SCSI removable disk
Aug 8 21:51:16 skeo kernel: sd 3:0:0:1: Attached scsi generic sg2 type 0
Aug 8 21:51:16 skeo kernel: scsi 3:0:0:2: Direct-Access Generic USB Storage-SMC I19A PQ: 0 ANSI: 0 CCS
Aug 8 21:51:16 skeo kernel: sd 3:0:0:2: [sdd] Attached SCSI removable disk
Aug 8 21:51:16 skeo kernel: sd 3:0:0:2: Attached scsi generic sg3 type 0
Aug 8 21:51:16 skeo kernel: scsi 3:0:0:3: Direct-Access Generic USB Storage-MSC I19A PQ: 0 ANSI: 0 CCS
Aug 8 21:51:16 skeo kernel: sd 3:0:0:3: [sde] Attached SCSI removable disk
Aug 8 21:51:16 skeo kernel: sd 3:0:0:3: Attached scsi generic sg4 type 0
Aug 8 21:51:16 skeo kernel: usb-storage: device scan complete
Aug 8 21:51:16 skeo kernel: attempt to access beyond end of device
Aug 8 21:51:16 skeo kernel: sdc: rw=0, want=3983480, limit=1992704
Aug 8 21:51:16 skeo kernel: Buffer I/O error on device sdc1, logical block 3983232
Aug 8 21:51:17 skeo kernel: attempt to access beyond end of device
и последние 3 строчки повторяются много-много раз.
--
С уважением, Александр.
next reply other threads:[~2008-08-08 18:16 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-08 18:16 Alexander [this message]
2008-08-08 18:23 ` Andrey Rahmatullin
2008-08-08 19:38 ` Alexander
2008-08-08 21:03 ` Sergey Vlasov
2008-08-11 7:02 ` Yury Aliaev
2008-08-08 18:24 ` Denis Nazarov
2008-08-09 19:32 ` Alexander
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080808221610.7924c145@skeo.skeo \
--to=shurikx1@mail.ru \
--cc=community@lists.altlinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git