* [Comm] nvidia TV
@ 2008-04-17 17:48 Van Petrov
2008-04-23 4:52 ` Хихин Руслан
0 siblings, 1 reply; 3+ messages in thread
From: Van Petrov @ 2008-04-17 17:48 UTC (permalink / raw)
To: community
[-- Attachment #1: Type: text/plain, Size: 123 bytes --]
Гляньте, пожалуйста, мой xorg
Может там что не так.
Проблема ТВ посте установки nvidia стал показывать "рывками".
И.П.
[-- Attachment #2: xorg.conf --]
[-- Type: text/plain, Size: 5299 bytes --]
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (builder@apiary.armor.altlinux.org) Fri Dec 21 18:36:32 MSK 2007
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (builder@apiary.armor.altlinux.org) Thu Feb 28 03:48:29 MSK 2008
Section "ServerLayout"
Identifier "Minimal layout"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "ImExPS/2 Generic Explorer Mouse|0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
Load "freetype"
Load "glx"
Load "dri"
Load "dga"
Load "dbe"
Load "extmod"
Load "v4l"
SubSection "extmod"
Option "omit xfree86-dga"
# Load "v4l"
EndSubSection
EndSection
Section "ServerFlags"
# Removed Option "Xinerama" "0"
# Removed Option "Xinerama" "1"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "ImExPS/2 Generic Explorer Mouse|0"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Samsung SyncMaster 957FS/950FS/907FS/CS197A(P)|0"
ModelName "Samsung SyncMaster"
DisplaySize 360 270
HorizSync 30.0 - 96.0
VertRefresh 50.0 - 160.0
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 96.0
VertRefresh 50.0 - 160.0
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "TV-0"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
EndSection
Section "Device"
Identifier "Card0|0"
Driver "nvidia"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce FX 5500"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce FX 5500"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
# Removed Option "metamodes" "CRT: 1152x864_100 +0+0, TV: nvidia-auto-select +1152+0; CRT: 1024x768 +0+0, TV: nvidia-auto-select +1024+0; CRT: 832x624 +0+0, TV: nvidia-auto-select +832+0; CRT: 800x600 +0+0, TV: nvidia-auto-select +800+0; CRT: 720x400 +0+0, TV: nvidia-auto-select +720+0; CRT: 640x480 +0+0, TV: nvidia-auto-select +640+0"
# Removed Option "metamodes" "CRT: 1152x864_100 +0+0, TV: nvidia-auto-select +0+0; CRT: 1024x768 +0+0, TV: nvidia-auto-select +0+0; CRT: 832x624 +0+0, TV: nvidia-auto-select +0+0; CRT: 800x600 +0+0, TV: nvidia-auto-select +0+0; CRT: 720x400 +0+0, TV: nvidia-auto-select +0+0; CRT: 640x480 +0+0, TV: nvidia-auto-select +0+0"
# Removed Option "TwinView" "1"
# Removed Option "metamodes" "CRT: 1152x864 +0+0, TV: nvidia-auto-select +1152+0; CRT: 1152x864_100 +0+0, TV: nvidia-auto-select +1152+0; CRT: 1024x768 +0+0, TV: nvidia-auto-select +1024+0; CRT: 832x624 +0+0, TV: nvidia-auto-select +832+0; CRT: 800x600 +0+0, TV: nvidia-auto-select +800+0; CRT: 720x400 +0+0, TV: nvidia-auto-select +720+0"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "NvAgp" "3"
Option "RenderAccel" "true"
Option "AllowGLXWithComposite"
Option "VideoOverlay" "on"
Option "Backingstore" "true"
Option "RandRRotation" "true"
Option "TripleBuffer" "true"
Option "AddARGBGLXVisuals" "true"
Option "TwinView" "0"
Option "XDGASelectInput" "1"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "CRT: 1152x864_100 +0+0; CRT: 1152x864 +0+0; CRT: 1024x768 +0+0; CRT: 832x624 +0+0; CRT: 800x600 +0+0; CRT: 720x400 +0+0"
SubSection "Display"
Depth 8
Modes "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1280x72
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1280x72
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1280x72
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1280x72
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 16
Option "TwinView" "0"
Option "metamodes" "TV: nvidia-auto-select +0+0"
SubSection "Display"
Depth 16
EndSubSection
EndSection
Section "Extensions"
Option "RENDER" "true"
Option "Composite" "true"
EndSection
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Comm] nvidia TV
2008-04-17 17:48 [Comm] nvidia TV Van Petrov
@ 2008-04-23 4:52 ` Хихин Руслан
2008-04-23 9:50 ` Van Petrov
0 siblings, 1 reply; 3+ messages in thread
From: Хихин Руслан @ 2008-04-23 4:52 UTC (permalink / raw)
To: community
[-- Attachment #1: Type: text/plain, Size: 370 bytes --]
Здравствуйте Van Petrov
В сообщении от 17 апреля 2008 Van Petrov написал(a):
> Load "dri"
Для nvidia не нужен
> Section "Extensions"
.........
> Option "Composite" "true"
> EndSection
это вам надо ?
--
А ещё говорят так (fortune):
________________________________________________________________________
С уважением Хихин Руслан
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Comm] nvidia TV
2008-04-23 4:52 ` Хихин Руслан
@ 2008-04-23 9:50 ` Van Petrov
0 siblings, 0 replies; 3+ messages in thread
From: Van Petrov @ 2008-04-23 9:50 UTC (permalink / raw)
To: community
Спасибо за ответ!
Хихин Руслан пишет:
> Здравствуйте Van Petrov
> В сообщении от 17 апреля 2008 Van Petrov написал(a):
>
> > Load "dri"
> Для nvidia не нужен
> > Section "Extensions"
> .........
> > Option "Composite" "true"
> > EndSection
> это вам надо ?
Видимо не надо
Проблема похоже все-таки в v4l2...
Тут в интернете нашел тсрочку для mplayer-а.
Видео дергается, но mplayer хоть причину пишет:
-------------------------------------------------------
Обнаружены названия TV каналов.
Выбран канал: R12 - ORT (частота: 223,250)
xscreensaver_disable: Не могу найти окно XScreenSaver'а.
==========================================================================
Открываю декодер видео: [raw] RAW Uncompressed Video
VDec: запрос vo config - 512 x 384 (предпочтимое цветовое
пространство: Planar YV12)
VDec: использую Planar YV12 в качестве выходного csp (не 0)
Movie-Aspect не определён - премасштабирование не применяется.
VO: [xv] 512x384 => 512x384 Planar YV12
Выбран видеокодек: [rawyv12] vfm: raw (RAW YV12)
==========================================================================
Аудио: без звука!!!
Начало воcпроизведения...
v4l2: ioctl dequeue buffer failed: Ошибка ввода/вывода, idx = 0
v4l2: ioctl dequeue buffer failed: Ошибка ввода/вывода, idx = 0
v4l2: 369 frames successfully processed, 322 frames dropped.
Выходим... (Quit)
-----------------------------------------------
По сути: Похоже v4l2 не хватает какого-то буфера (?).
И.П.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2008-04-23 9:50 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-04-17 17:48 [Comm] nvidia TV Van Petrov
2008-04-23 4:52 ` Хихин Руслан
2008-04-23 9:50 ` Van Petrov
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git