* [Comm] Установка принтера Canon LBP810 @ 2008-04-18 7:53 Брагин Алексей 2008-04-18 8:48 ` Michael Shigorin 2008-04-18 10:11 ` Андрей Черепанов 0 siblings, 2 replies; 7+ messages in thread From: Брагин Алексей @ 2008-04-18 7:53 UTC (permalink / raw) To: community Здравствуйте. Вопрос такой, как в системе AltLinux Lite 4.02 установить вышеупомянутый принтер. Поискал в настройках, ничего не нашел, драйверов у производителя тоже не нашел, как быть? Спасибо -- Яндекс.Фотки - легко загрузить с мобильного http://mobile.yandex.ru/fotki/ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Comm] Установка принтера Canon LBP810 2008-04-18 7:53 [Comm] Установка принтера Canon LBP810 Брагин Алексей @ 2008-04-18 8:48 ` Michael Shigorin 2008-04-18 10:11 ` Андрей Черепанов 1 sibling, 0 replies; 7+ messages in thread From: Michael Shigorin @ 2008-04-18 8:48 UTC (permalink / raw) To: community On Fri, Apr 18, 2008 at 11:53:07AM +0400, Брагин Алексей wrote: > Здравствуйте. Вопрос такой, как в системе AltLinux Lite 4.02 > установить вышеупомянутый принтер. Поискал в настройках, ничего > не нашел, драйверов у производителя тоже не нашел, как быть? Странно, вообще они именно у производителя и лежат. http://www.freesource.info/wiki/HCL/Periferija/Printery/Canon -- ---- WBR, Michael Shigorin <mike@altlinux.ru> ------ Linux.Kiev http://www.linux.kiev.ua/ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Comm] Установка принтера Canon LBP810 2008-04-18 7:53 [Comm] Установка принтера Canon LBP810 Брагин Алексей 2008-04-18 8:48 ` Michael Shigorin @ 2008-04-18 10:11 ` Андрей Черепанов 1 sibling, 1 reply; 7+ messages in thread From: Андрей Черепанов @ 2008-04-18 10:11 UTC (permalink / raw) To: ALT Linux Community general discussions 18 апреля 2008 Брагин Алексей написал: > Здравствуйте. Вопрос такой, как в системе AltLinux Lite 4.02 установить > вышеупомянутый принтер. Поискал в настройках, ничего не нашел, драйверов у > производителя тоже не нашел, как быть? http://openprinting.org/show_printer.cgi?recnum=Canon-LBP-810 -- Андрей Черепанов ALT Linux cas@altlinux.ru ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <480C416B.4090607@yandex.ru>]
* Re: [Comm] Установка принтера Canon LBP810 @ 2008-04-21 8:09 ` Michael Shigorin 2008-04-22 18:31 ` Alexey Borisenkov 0 siblings, 2 replies; 7+ messages in thread From: Michael Shigorin @ 2008-04-21 8:09 UTC (permalink / raw) To: ALT Linux Community general discussions On Mon, Apr 21, 2008 at 11:25:31AM +0400, Вебмастер wrote: > Господа, помогите пожалуйста новичку установить это драйвер. Спасибо Рядом же в треде три дня тому писал -- смотрели? http://www.freesource.info/wiki/HCL/Periferija/Printery/Canon Там вполне пошагово и пограбельно. -- ---- WBR, Michael Shigorin <mike@altlinux.ru> ------ Linux.Kiev http://www.linux.kiev.ua/ ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <480C4FD2.2070700@yandex.ru>]
* Re: [Comm] Установка принтера Canon LBP810 @ 2008-04-21 8:48 ` Michael Shigorin 0 siblings, 0 replies; 7+ messages in thread From: Michael Shigorin @ 2008-04-21 8:48 UTC (permalink / raw) To: ALT Linux Community general discussions On Mon, Apr 21, 2008 at 12:26:58PM +0400, Вебмастер wrote: >>> Господа, помогите пожалуйста новичку установить это драйвер. Спасибо Большая просьба не слать сюда HTML -- архивируется хуже и отвечать неудобно (обычно и некогда). >> Рядом же в треде три дня тому писал -- смотрели? >> http://www.freesource.info/wiki/HCL/Periferija/Printery/Canon >> Там вполне пошагово и пограбельно. > Да, конечно смотрел и пытался ставить, но с теми пакетами > никак не пошел принтер. С какой именно версией? Как пытались? Как "никак не пошёл"? Понимаете, в линуксе возможно выражаться определённо -- и это стоит делать :-) "Взял версию 1.30, пошёл на http://localhost:631, принтер увиделся, сконфигурировался, но не печатает вообще ничего" -- это сообщение, на которое есть что сказать в ответ ("ага, теперь почитайте README -- эта зараза не настраивается через usb://, там надо поднимать левый процесс и настраивать через ccpd://"). А на "смотрел, пытался, никак" получается только сказать "ну ква" :-) > Да и написано там, что не поддерживается 810 На страничке, куда я сослался -- написано (цитирую): --- Хоть и не написано что поддерживаются модели LBP-800 и LBP-810, но у меня работают. При этом использовал .ppd от LBP-1210 --- При этом настраивать cndrvcups-capt надо СТРОГО ПО README. > просто у автора другой драйвер сработал, а у меня нет. Вот > Андрей Черепанов дал ссылку именно для Сanon LBP 810 > [2]http://openprinting.org/show_printer.cgi?recnum=Canon-LBP-810 > Но там не рпм пакет, вот и спросил помочь. Это поделие давно упаковано, но неживое. 2 cas: если вдруг будет возможность -- этот принтер хорошо бы проверить на cndrvcups и отпинать опенпринтингов (довешиванием другой информации и сообщением о кривости висящей) насчёт того, что они только вводят людей в заблуждение. capt не обрабатывает ошибки по бумаге и вообще странный зверёк. -- ---- WBR, Michael Shigorin <mike@altlinux.ru> ------ Linux.Kiev http://www.linux.kiev.ua/ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Comm] Установка принтера Canon LBP810 2008-04-21 8:09 ` Michael Shigorin @ 2008-04-22 18:31 ` Alexey Borisenkov 2008-04-22 20:16 ` Michael Shigorin 1 sibling, 1 reply; 7+ messages in thread From: Alexey Borisenkov @ 2008-04-22 18:31 UTC (permalink / raw) To: shigorin, ALT Linux Community general discussions Michael Shigorin пишет: > Рядом же в треде три дня тому писал -- смотрели? > http://www.freesource.info/wiki/HCL/Periferija/Printery/Canon > > Там вполне пошагово и пограбельно. А что там про cndrvcups-lb так таинственно и загадочно? Не понятно, пробовал его кто-нибудь и видел ли вообще в живую... Сегодня пробовал cndrvcups-lb 1.60, взятый с азиатского сайта, со своим МФУ MF4120 (он UFR II). Вроде работает и локально, и будучи подцеплен к WinXP, по smb. Правда предлагаемые RPM не пробовал (наверно они тоже заработают), пересобирал из взятых там же src.rpm (насколько это вообще возможно с кривыми закрытыми либами). ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Comm] Установка принтера Canon LBP810 2008-04-22 18:31 ` Alexey Borisenkov @ 2008-04-22 20:16 ` Michael Shigorin 0 siblings, 0 replies; 7+ messages in thread From: Michael Shigorin @ 2008-04-22 20:16 UTC (permalink / raw) To: ALT Linux Community general discussions On Tue, Apr 22, 2008 at 11:31:40PM +0500, Alexey Borisenkov wrote: > А что там про cndrvcups-lb так таинственно и загадочно? Не > понятно, пробовал его кто-нибудь и видел ли вообще в живую... Без малейшего -- так и не понял, для каких они (правда, особо и не искал). -- ---- WBR, Michael Shigorin <mike@altlinux.ru> ------ Linux.Kiev http://www.linux.kiev.ua/ ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2008-04-22 20:16 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2008-04-18 7:53 [Comm] Установка принтера Canon LBP810 Брагин Алексей 2008-04-18 8:48 ` Michael Shigorin 2008-04-18 10:11 ` Андрей Черепанов 2008-04-21 8:09 ` Michael Shigorin 2008-04-21 8:48 ` Michael Shigorin 2008-04-22 18:31 ` Alexey Borisenkov 2008-04-22 20:16 ` Michael Shigorin
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git