From: Grigory Batalov <bga@altlinux.org> To: community@lists.altlinux.org Subject: Re: [Comm] GPS & Linux Date: Fri, 11 Apr 2008 02:00:02 +0400 Message-ID: <20080411020002.5c441b06.bga@altlinux.org> (raw) In-Reply-To: <200804110309.22974.vip0@seversk.ru> On Fri, 11 Apr 2008 03:09:22 +0700, Vyatcheslav Perevalov wrote: > > щас перегружусь, проверю udev отрабатывает или нет > > Перегрузился, проверил. > > При загрузке прибор отключен: > [root@family ~]# service gpsd status > gpsd is stopped Это не имеет значения, init-скрипт проверяет сохранённый в pid-файле номер процесса, а файла, естественно, нет. (Даже если бы udev сработал.) > ps auxw |grep gps > молчит > > Подключаем прибор: > /var/log/messages > > Apr 11 03:05:57 family gpsd.hotplug: no ttyUSB device > under /devices/pci0000:00/0000:00:02.1/usb3/3-3 > Apr 11 03:05:57 family gpsd.hotplug: waiting for /dev/ttyUSB0 > Apr 11 03:05:58 family gpsd.hotplug: /dev/ttyUSB0 has gone active > Apr 11 03:05:58 family gpsd.hotplug: gpsd_control(action=add, > arg=/dev/ttyUSB0) > Apr 11 03:05:58 family gpsd.hotplug: socket /var/run/gpsd.sock doesn't exist > Apr 11 03:05:58 family gpsd.hotplug: launching gpsd -F /var/run/gpsd.sock > Apr 11 03:05:58 family gpsd[7356]: Gpsd started (Version 1.06b) > Apr 11 03:05:59 family gpsd[7356]: Gpsd listening on port 2947 > Apr 11 03:05:59 family gpsd.hotplug: socket /var/run/gpsd.sock doesn't exist > Apr 11 03:05:59 family gpsd.hotplug: can't reach gpsd > Apr 11 03:05:59 family gpsd.hotplug: gpsd.hotplug: exception > exceptions.TypeError yields coercing to Unicode: need string or buffer, > NoneType found > > Прибор отключаем: > Apr 11 03:06:37 family kernel: usb 3-3: USB disconnect, address 5 > Apr 11 03:06:37 family kernel: garmin_gps ttyUSB0: Garmin GPS usb/tty > converter now disconnected from ttyUSB0 > Apr 11 03:06:37 family kernel: garmin_gps 3-3:1.0: device disconnected > > > ps auxw |grep gps > root 7356 0.0 0.2 1820 524 ? S<s 03:05 0:00 > gpsd -F /var/run/gpsd.sock > root 7604 0.0 0.2 1988 636 pts/3 R+ 03:07 0:00 grep gps > > Подключаем снова: > > Apr 11 03:08:09 family gpsd.hotplug: no ttyUSB device > under /devices/pci0000:00/0000:00:02.1/usb3/3-3 > Apr 11 03:08:09 family gpsd.hotplug: waiting for /dev/ttyUSB0 > Apr 11 03:08:10 family gpsd.hotplug: /dev/ttyUSB0 has gone active > Apr 11 03:08:10 family gpsd.hotplug: gpsd_control(action=add, > arg=/dev/ttyUSB0) > Apr 11 03:08:10 family gpsd.hotplug: socket /var/run/gpsd.sock doesn't exist > Apr 11 03:08:10 family gpsd.hotplug: launching gpsd -F /var/run/gpsd.sock > Apr 11 03:08:10 family gpsd[7802]: Gpsd started (Version 1.06b) > Apr 11 03:08:10 family gpsd[7802]: Gpsd listening on port 2947 > Apr 11 03:08:10 family gpsd[7802]: Can't bind to port 2947: Address already > in use Exit now... > Apr 11 03:08:10 family gpsd.hotplug: socket /var/run/gpsd.sock doesn't exist > Apr 11 03:08:10 family gpsd.hotplug: can't reach gpsd > Apr 11 03:08:10 family gpsd.hotplug: gpsd.hotplug: exception > exceptions.TypeError yields coercing to Unicode: need string or buffer, > NoneType found Спасибо! Как видно, скрипт hotplug ещё нужно доводить до ума =) Сообщите Ваши idProduct/idVendor, я добавлю их в пакет.
next prev parent reply other threads:[~2008-04-10 22:00 UTC|newest] Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top 2007-06-11 12:54 Grigory Batalov 2007-06-13 11:01 ` Genix 2008-04-06 12:15 ` Vyatcheslav Perevalov 2008-04-06 17:26 ` Grigory Batalov 2008-04-06 17:29 ` Vyatcheslav Perevalov 2008-04-06 19:18 ` Motsyo Gennadi aka Drool 2008-04-06 20:54 ` Motsyo Gennadi aka Drool 2008-04-06 20:58 ` Motsyo Gennadi aka Drool 2008-04-07 14:56 ` Michael Shigorin 2008-04-07 15:38 ` Motsyo Gennadi aka Drool 2008-04-08 21:22 ` Michael Shigorin 2008-04-08 22:07 ` Pavlov Konstantin 2008-04-09 3:50 ` Motsyo Gennadi aka Drool 2008-04-09 16:05 ` Pavlov Konstantin 2008-04-09 14:26 ` Grigory Batalov 2008-04-10 7:23 ` Vyatcheslav Perevalov 2008-04-10 8:26 ` Grigory Batalov 2008-04-10 15:18 ` Vyatcheslav Perevalov 2008-04-10 16:07 ` Vyatcheslav Perevalov 2008-04-10 19:42 ` Grigory Batalov 2008-04-10 19:47 ` Vyatcheslav Perevalov 2008-04-10 20:09 ` Vyatcheslav Perevalov 2008-04-10 22:00 ` Grigory Batalov [this message] 2008-04-11 5:56 ` Vyatcheslav Perevalov 2007-06-13 19:22 ` Sergey 2007-06-14 6:38 ` Genix 2007-06-14 9:43 ` Grigory Batalov 2007-07-25 4:37 ` Sergey
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20080411020002.5c441b06.bga@altlinux.org \ --to=bga@altlinux.org \ --cc=community@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git