* [Comm] Настройка USB -> Serial Port Converter
@ 2008-01-17 7:14 Vyacheslav A. Brunev
2008-01-17 8:32 ` A.Kitouwaykin
2008-01-17 13:17 ` Владимир Гусев
0 siblings, 2 replies; 3+ messages in thread
From: Vyacheslav A. Brunev @ 2008-01-17 7:14 UTC (permalink / raw)
To: ALT Linux Community general discussions
Здравствуйте уважаемые!
Возникла необходимость сопряжения вот этого устройства:
http://www.conectica.ro/display/1-1-641-Cabluri_USB/Cablu_convertor_USB_-__SERIAL.html
Система ALD-4 Branch.
вывод lsusb:
Bus 001 Device 008: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x067b Prolific Technology, Inc.
idProduct 0x2303 PL2303 Serial Port
bcdDevice 3.00
iManufacturer 1 Prolific Technology Inc.
iProduct 2 USB-Serial Controller
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x000a 1x 10 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
Подскажите существует ли вероятность настройки данного девайса для работы с
COM-портом, и если да то подскажите как это сделать?
--
С уважением,
Брунёв Вячеслав.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Comm] Настройка USB -> Serial Port Converter
2008-01-17 7:14 [Comm] Настройка USB -> Serial Port Converter Vyacheslav A. Brunev
@ 2008-01-17 8:32 ` A.Kitouwaykin
2008-01-17 13:17 ` Владимир Гусев
1 sibling, 0 replies; 3+ messages in thread
From: A.Kitouwaykin @ 2008-01-17 8:32 UTC (permalink / raw)
To: community
On Thu, 17 Jan 2008 13:14:20 +0600
Vyacheslav A. Brunev wrote:
> Здравствуйте уважаемые!
>
> Возникла необходимость сопряжения вот этого устройства:
> http://www.conectica.ro/display/1-1-641-Cabluri_USB/Cablu_convertor_USB_-__SERIAL.html
> Система ALD-4 Branch.
>
> вывод lsusb:
> Bus 001 Device 008: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Добрый день. А что не работает?
Обычно появляется /dev/ttyUSBx, которое и используется...
Вместо x должно быть число, смотрим на 12 консоли либо в выводе dmesg,
либо в /sys/bus/usb-serial/devices, на какой девайс отображается конкретный экземпляр.
--
Китайкин Анатолий Константинович
ОАО "Радиоавионика", СПб
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Comm] Настройка USB -> Serial Port Converter
2008-01-17 7:14 [Comm] Настройка USB -> Serial Port Converter Vyacheslav A. Brunev
2008-01-17 8:32 ` A.Kitouwaykin
@ 2008-01-17 13:17 ` Владимир Гусев
1 sibling, 0 replies; 3+ messages in thread
From: Владимир Гусев @ 2008-01-17 13:17 UTC (permalink / raw)
To: community
On Thu, 17 Jan 2008 13:14:20 +0600
Vyacheslav A. Brunev wrote:
> Здравствуйте уважаемые!
>
> Возникла необходимость сопряжения вот этого устройства:
> http://www.conectica.ro/display/1-1-641-Cabluri_USB/Cablu_convertor_USB_-__SERIAL.html
> Система ALD-4 Branch.
> [..]
> Подскажите существует ли вероятность настройки данного девайса для
> работы с COM-портом, и если да то подскажите как это сделать?
Вы его воткните, и оно готово.. этот виртуальный com-порт будет
типа /dev/ttyUSB*, чаще всего *=0, и все.. в настройках программы,
использующей com-порт прописать это, и все..
--
С уважением,
Владимир Гусев
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2008-01-17 13:17 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-01-17 7:14 [Comm] Настройка USB -> Serial Port Converter Vyacheslav A. Brunev
2008-01-17 8:32 ` A.Kitouwaykin
2008-01-17 13:17 ` Владимир Гусев
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git