ALT Linux Community general discussions
 help / color / mirror / Atom feed
* [Comm] Проблемы с Marvell 88SE61xx на MB ASUS P5K WS
@ 2007-12-28 19:59 Maxim Ivanov
  2007-12-28 20:11 ` Хихин Руслан
  0 siblings, 1 reply; 7+ messages in thread
From: Maxim Ivanov @ 2007-12-28 19:59 UTC (permalink / raw)
  To: ALT Linux Community general discussions

День добрый!

Удалось проинсталлировать ALT Desktop по FTP.
Он у меня вчистую отказывался видеть DVD при
инсталляции.
После инсталляции выяснилось, что DVD мы
по-прежнему не видим.
Проблема прослеживается только на нашем
дистрибутиве. На эту же машину легко и с песнями
встал OpenSUSE 10.3.
Вопрос к знатокам: что в таких случаях делают?
Винды поставить не предлагать :)
_______________________
Максим Иванов


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [Comm] Проблемы с Marvell 88SE61xx на MB ASUS P5K WS
  2007-12-28 19:59 [Comm] Проблемы с Marvell 88SE61xx на MB ASUS P5K WS Maxim Ivanov
@ 2007-12-28 20:11 ` Хихин Руслан
  2007-12-28 20:24   ` Maxim Ivanov
  2007-12-29  7:13   ` Maxim Ivanov
  0 siblings, 2 replies; 7+ messages in thread
From: Хихин Руслан @ 2007-12-28 20:11 UTC (permalink / raw)
  To: community

[-- Attachment #1: Type: text/plain, Size: 847 bytes --]

Здравствуйте Maxim Ivanov
  В сообщении от 28 декабря 2007 Maxim Ivanov написал(a):
 > День добрый!
 > Удалось проинсталлировать ALT Desktop по FTP.
 > Он у меня вчистую отказывался видеть DVD при
 > инсталляции.
 >
 > После инсталляции выяснилось, 
Каким образом это выяснилось ?
 > что DVD мы 
 > по-прежнему не видим.
Хорошо-бы о контроллере, на котором висит DVD чуть-чуть информации :) 
 > Проблема прослеживается только на нашем
 > дистрибутиве. На эту же машину легко и с песнями
 > встал OpenSUSE 10.3.
 >
 > Вопрос к знатокам: что в таких случаях делают?
 > Винды поставить не предлагать :)
 Анализируют dmesg ?


-- 
  А ещё говорят так  (fortune):
 
- Что делает системный администратор, проснувшись с похмелья? - 
Тестирует память...  

________________________________________________________________________
С уважением Хихин Руслан

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [Comm] Проблемы с Marvell 88SE61xx на MB ASUS P5K WS
  2007-12-28 20:11 ` Хихин Руслан
@ 2007-12-28 20:24   ` Maxim Ivanov
  2007-12-29  7:13   ` Maxim Ivanov
  1 sibling, 0 replies; 7+ messages in thread
From: Maxim Ivanov @ 2007-12-28 20:24 UTC (permalink / raw)
  To: hihin, ALT Linux Community general discussions

Хихин Руслан пишет:
> Здравствуйте Maxim Ivanov
>   В сообщении от 28 декабря 2007 Maxim Ivanov написал(a):
>  > День добрый!
>  > Удалось проинсталлировать ALT Desktop по FTP.
>  > Он у меня вчистую отказывался видеть DVD при
>  > инсталляции.
>  >
>  > После инсталляции выяснилось, 
> Каким образом это выяснилось ?
>   

Тем самым, что нет никакого упоминания ни в каких логах про
CD или DVD.
>  > что DVD мы 
>  > по-прежнему не видим.
> Хорошо-бы о контроллере, на котором висит DVD чуть-чуть информации :) 
>   
Завтра обязательно вывешу pciscan
>  > Проблема прослеживается только на нашем
>  > дистрибутиве. На эту же машину легко и с песнями
>  > встал OpenSUSE 10.3.
>  >
>  > Вопрос к знатокам: что в таких случаях делают?
>  > Винды поставить не предлагать :)
>  Анализируют dmesg ?
>   

Он пуст на предмет CD или DVD.
Показать здесь его целиком?


На самом деле проблема не только у нас:

http://bbs.archlinux.org/viewtopic.php?pid=288776
________________
Максим Иванов


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [Comm] Проблемы с Marvell 88SE61xx на MB ASUS P5K WS
  2007-12-28 20:11 ` Хихин Руслан
  2007-12-28 20:24   ` Maxim Ivanov
@ 2007-12-29  7:13   ` Maxim Ivanov
  2007-12-29  7:58     ` Sergey Vlasov
  1 sibling, 1 reply; 7+ messages in thread
From: Maxim Ivanov @ 2007-12-29  7:13 UTC (permalink / raw)
  To: hihin, ALT Linux Community general discussions

День добрый!

Ну вот, выкладываю на общее обозрение выкрутасы
материнской платы ASUS P5K WS.

Легко можно наблюдать, что оборудование не опознано.
Мало того, что карточка ATI 2600 Pro не опозналась,
так еще и контроллер Marvell PATA не опознался,
ввиду чего у меня нет DVD.


Есть какие-нибудь мысли на этот счет?

# lsmod
Module                  Size  Used by
binfmt_misc            12040  1
ac                      6148  0
cpufreq_powersave       2816  0
cpufreq_conservative     7944  0
cpufreq_ondemand        9228  0
freq_table              5536  1 cpufreq_ondemand
cpufreq_userspace       5152  0
fuse                   44948  4
dm_mod                 53696  0
usbhid                 38880  0
ff_memless              6408  1 usbhid
snd_hda_intel         278816  1
snd_pcm_oss            39840  0
snd_seq_dummy           4868  0
i2c_i801                9744  0
firewire_ohci          17536  0
firewire_core          40128  1 firewire_ohci
floppy                 55908  0
ehci_hcd               32140  0
uhci_hcd               23952  0
generic                 5892  0 [permanent]
sg                     33948  0
ide_core              119876  1 generic
serio_raw               7684  0
psmouse                37008  0
usbcore               126344  4 usbhid,ehci_hcd,uhci_hcd
evdev                  10368  1
intel_agp              24084  0
saa7134               122188  0
video_buf              24196  1 saa7134
compat_ioctl32          2432  1 saa7134
ir_kbd_i2c             10384  1 saa7134
i2c_core               24576  3 i2c_i801,saa7134,ir_kbd_i2c
snd_seq_oss            32384  0
ir_common              35972  2 saa7134,ir_kbd_i2c
videodev               27648  1 saa7134
v4l2_common            17664  2 saa7134,videodev
v4l1_compat            13572  2 saa7134,videodev
fglrx                1482348  0
agpgart                32840  2 intel_agp,fglrx
pcspkr                  4224  0
snd_seq_midi_event      7936  1 snd_seq_oss
snd_seq                48208  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device          8972  3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_mixer_oss          17024  1 snd_pcm_oss
tsdev                   9024  0
snd_pcm                73220  2 snd_hda_intel,snd_pcm_oss
rtc                    13976  0
sky2                   41860  0
crc_itu_t               3200  1 firewire_core
snd_timer              22276  2 snd_seq,snd_pcm
snd_page_alloc         11144  2 snd_hda_intel,snd_pcm
snd_hwdep               9988  1 snd_hda_intel
snd                    51044  12 snd_hda_intel,snd_pcm_oss,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep
soundcore               8544  1 snd
ext3                  122376  4
jbd                    56232  1 ext3
mbcache                 9348  1 ext3
ata_generic             8580  0
ata_piix               18052  7
libata                116848  2 ata_generic,ata_piix
sd_mod                 28160  8
scsi_mod              137484  3 sg,libata,sd_mod





# pciscan
Recommended driver     Description
------------------     -----------
intel-agp              Intel Corporation DRAM Controller [Host bridge]
shpchp                 Intel Corporation PCI Express Root Port [PCI bridge Normal decode]
uhci-hcd               Intel Corporation USB UHCI Controller #4 [UHCI USB Controller]
uhci-hcd               Intel Corporation USB UHCI Controller #5 [UHCI USB Controller]
uhci-hcd               Intel Corporation USB UHCI Controller #6 [UHCI USB Controller]
ehci-hcd               Intel Corporation USB2 EHCI Controller #2 [EHCI USB Controller]
snd-hda-intel          Intel Corporation HD Audio Controller []
shpchp                 Intel Corporation PCI Express Port 1 [PCI bridge Normal decode]
shpchp                 Intel Corporation PCI Express Port 3 [PCI bridge Normal decode]
shpchp                 Intel Corporation PCI Express Port 4 [PCI bridge Normal decode]
shpchp                 Intel Corporation PCI Express Port 5 [PCI bridge Normal decode]
shpchp                 Intel Corporation PCI Express Port 6 [PCI bridge Normal decode]
uhci-hcd               Intel Corporation USB UHCI Controller #1 [UHCI USB Controller]
uhci-hcd               Intel Corporation USB UHCI Controller #2 [UHCI USB Controller]
uhci-hcd               Intel Corporation USB UHCI Controller #3 [UHCI USB Controller]
ehci-hcd               Intel Corporation USB2 EHCI Controller #1 [EHCI USB Controller]
unknown                Intel Corporation 82801 PCI Bridge [PCI bridge Subtractive decode]
unknown                Intel Corporation Unknown device 2916 [ISA bridge]
ata_piix               Intel Corporation 4 port SATA IDE Controller [IDE interface storage controller]
i2c-i801               Intel Corporation SMBus Controller [SMBus]
ata_piix               Intel Corporation 2 port SATA IDE Controller [IDE interface storage controller]
fglrx                  ATI Technologies Inc Unknown device 9589 [VGA compatible controller]
unknown                ATI Technologies Inc Unknown device aa08 []
ata_generic generic    Marvell Technology Group Ltd. Unknown device 6121 [IDE interface storage controller]
sky2                   Marvell Technology Group Ltd. Unknown device 4364 [Ethernet controller]
sky2                   Marvell Technology Group Ltd. 88E8052 PCI-E ASF Gigabit Ethernet Controller [Ethernet controller]
shpchp                 NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge [PCI bridge Normal decode]
shpchp                 NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge [PCI bridge Normal decode]
saa7134                Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder [Multimedia controller]
firewire-ohci          VIA Technologies, Inc. IEEE 1394 Host Controller [OHCI FireWire (IEEE 1394)]


# dmesg
Linux version 2.6.22-wks-smp-alt0.7 (builder@lks.home) (gcc version 4.1.1 20070105 (ALT Linux, build 4.1.1-alt12)) #1 SMP Wed Nov 14 02:43:42 MSK 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
 BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007ff40000 (usable)
 BIOS-e820: 000000007ff40000 - 000000007ff4e000 (ACPI data)
 BIOS-e820: 000000007ff4e000 - 000000007ffe0000 (ACPI NVS)
 BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
Warning only 1152MB will be used.
Use a HIGHMEM enabled kernel.
1152MB LOWMEM available.
found SMP MP-table at 000ff780
Entering add_active_range(0, 0, 294912) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   294912
early_node_map[1] active PFN ranges
    0:        0 ->   294912
On node 0 totalpages: 294912
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 2272 pages used for memmap
  Normal zone: 288544 pages, LIFO batch:31
DMI 2.4 present.
ACPI: RSDP 000FB130, 0014 (r0 ACPIAM)
ACPI: RSDT 7FF40000, 0038 (r1 A_M_I_ OEMRSDT   6000704 MSFT       97)
ACPI: FACP 7FF40200, 0084 (r2 A_M_I_ OEMFACP   6000704 MSFT       97)
ACPI: DSDT 7FF405D0, 8190 (r1  A0754 A0754001        1 INTL 20060113)
ACPI: FACS 7FF4E000, 0040
ACPI: APIC 7FF40390, 0078 (r1 A_M_I_ OEMAPIC   6000704 MSFT       97)
ACPI: MCFG 7FF40410, 003C (r1 A_M_I_ OEMMCFG   6000704 MSFT       97)
ACPI: OEMB 7FF4E040, 0081 (r1 A_M_I_ AMI_OEM   6000704 MSFT       97)
ACPI: HPET 7FF48760, 0038 (r1 A_M_I_ OEMHPET   6000704 MSFT       97)
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 255, address 0xfec10000, GSI 24-279
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 2 I/O APICs
ACPI: HPET id: 0xffffffff base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
Built 1 zonelists.  Total pages: 292608
Kernel command line: auto BOOT_IMAGE=ALTLinux ro root=UUID=42776f71-f91b-4bdd-bb81-6cf884bb4532 panic=30 splash=silent resume=/dev/sda9
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
mapped IOAPIC to ffffb000 (fec10000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 3005.706 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
Memory: 1164568k/1179648k available (1795k kernel code, 14552k reserved, 715k data, 272k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffb5000 - 0xfffff000   ( 296 kB)
    vmalloc : 0xf8800000 - 0xfffb3000   ( 119 MB)
    lowmem  : 0xb0000000 - 0xf8000000   (1152 MB)
      .init : 0xb037a000 - 0xb03be000   ( 272 kB)
      .data : 0xb02c0fcb - 0xb0373fa4   ( 715 kB)
      .text : 0xb0100000 - 0xb02c0fcb   (1795 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet clockevent registered
Calibrating delay using timer specific routine.. 6010.80 BogoMIPS (lpj=300540)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3fd 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3fd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel(R) Core(TM)2 Duo CPU     E6850  @ 3.00GHz stepping 0b
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6055.78 BogoMIPS (lpj=302789)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3fd 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3fd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Duo CPU     E6850  @ 3.00GHz stepping 0b
Total of 2 processors activated (12066.58 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
migration_cost=14
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=9
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6.PXHA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6.P6PF._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 64-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
pnp: 00:07: ioport range 0x290-0x297 has been reserved
pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
pnp: 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
pnp: 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
pnp: 00:08: iomem range 0xffa00000-0xffafffff has been reserved
pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0e: iomem range 0xc0000-0xcffff could not be reserved
pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
  IO window: a000-afff
  MEM window: fe600000-fe6fffff
  PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:1c.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: fdf00000-fdffffff
PCI: Bridge: 0000:05:00.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:05:00.1
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: fde00000-fdefffff
PCI: Bridge: 0000:00:1c.2
  IO window: disabled.
  MEM window: fea00000-feafffff
  PREFETCH window: fde00000-fdefffff
PCI: Bridge: 0000:00:1c.3
  IO window: d000-dfff
  MEM window: fe900000-fe9fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
  IO window: c000-cfff
  MEM window: fe800000-fe8fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
  IO window: b000-bfff
  MEM window: fe700000-fe7fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
  IO window: e000-efff
  MEM window: feb00000-febfffff
  PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:05:00.0 to 64
ACPI: PCI Interrupt 0000:05:00.1[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:05:00.1 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.4 to 64
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 395k freed
audit: initializing netlink socket (disabled)
audit(1198922399.198:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
0000:00:1a.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
Allocate Port Service[0000:00:1c.5:pcie02]
vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1875k, total 16384k
vesafb: mode is 800x600x16, linelength=1600, pages=16
vesafb: protected mode interface info at c000:9f40
vesafb: pmi: set display start = b00c9fe2, set palette = b00ca0a0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfed00000 is busy
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
input: Macintosh mouse button emulation as /class/input/input0
kvm: already loaded the other module
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP bic registered
NET: Registered protocol family 1
Using IPI No-Shortcut mode
Freeing unused kernel memory: 272k freed
Executing init=/init
input: AT Translated Set 2 keyboard as /class/input/input1
SCSI subsystem initialized
libata version 2.21 loaded.
ata_piix 0000:00:1f.2: version 2.11
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x00018000 ctl 0x00017c02 bmdma 0x00017480 irq 20
ata2: SATA max UDMA/133 cmd 0x00017880 ctl 0x00017802 bmdma 0x00017488 irq 20
ata1.00: ATA-7: ST3500630NS, 3.AEK, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST3500630NS      3.AE PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 22 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.5 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x00019000 ctl 0x00018c02 bmdma 0x00018480 irq 20
ata4: SATA max UDMA/133 cmd 0x00018880 ctl 0x00018802 bmdma 0x00018488 irq 20
Attempting manual resume
Replacing swsusp.
TuxOnIce 2.2.10.4, with support for checksumming, usm, compression, swap storage, userui.
TuxOnIce: Normal swapspace found.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:04:00.0 to 64
sky2 0000:04:00.0: v1.14 addr 0xfe9fc000 irq 19 Yukon-EC (0xb6) rev 2
sky2 eth0: addr 00:1b:fc:e6:78:f6
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.0 to 64
sky2 0000:03:00.0: v1.14 addr 0xfe8fc000 irq 16 Yukon-EC Ultra (0xb4) rev 2
sky2 eth1: addr 00:1b:fc:e6:73:1a
Real Time Clock Driver v1.12ac
input: PC Speaker as /class/input/input2
Linux agpgart interface v0.102 (c) Dave Jones
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 1050 MBytes.
[fglrx] ASYNCIO init succeed!
[fglrx] PAT is enabled successfully!
[fglrx] module loaded - fglrx 8.42.3 [Oct 19 2007] on minor 0
Linux video capture interface: v2.00
saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 16 (level, low) -> IRQ 16
saa7133[0]: found at 0000:09:00.0, rev: 209, irq: 16, latency: 64, mmio: 0xfebff800
saa7133[0]: subsystem: 1461:a14b, board: UNKNOWN/GENERIC [card=0,autodetected]
saa7133[0]: board init: gpio is 2000798
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
saa7133[0]: i2c eeprom 00: 61 14 4b a1 ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: ff d1 f7 ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
sd 0:0:0:0: Attached scsi generic sg0 type 0
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.2: irq 18, io base 0x00009c00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 22, io base 0x00009080
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe5ffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
usb 4-2: new low speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 22, io mem 0xfe5ff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:09:07.0[A] -> GSI 20 (level, ln 1.10
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
usb 4-2: device not accepting address 2, error -71
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
firewire_core: created new fw device fw0 (0 config rom retries)
usb 4-2: new low speed USB device using uhci_hcd and address 4
usb 4-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Genius Optical Mouse as /class/input/input3
input: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Adding 8924068k swap on /dev/sda9.  Priority:-1 extents:1 across:8924068k
EXT3 FS on sda6, internal journal
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.8)
sky2 eth0: enabling interface
sky2 eth0: ram buffer 48K
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
usb 4-2: USB disconnect, address 4
sky2 eth0: Link is down.
usb 4-2: new low speed USB device using uhci_hcd and address 5
usb 4-2: configuration #1 chosen from 1 choice
input: Genius Optical Mouse as /class/input/input4
input: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-2
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both




^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [Comm] Проблемы с Marvell 88SE61xx на MB ASUS P5K WS
  2007-12-29  7:13   ` Maxim Ivanov
@ 2007-12-29  7:58     ` Sergey Vlasov
  2007-12-29 10:16       ` Maxim Ivanov
  0 siblings, 1 reply; 7+ messages in thread
From: Sergey Vlasov @ 2007-12-29  7:58 UTC (permalink / raw)
  To: community

[-- Attachment #1: Type: text/plain, Size: 1768 bytes --]

On Sat, Dec 29, 2007 at 10:13:07AM +0300, Maxim Ivanov wrote:
> Ну вот, выкладываю на общее обозрение выкрутасы
> материнской платы ASUS P5K WS.
> 
> Легко можно наблюдать, что оборудование не опознано.
> Мало того, что карточка ATI 2600 Pro не опозналась,

Как раз опозналось, раз определился модуль fglrx:

> fglrx                  ATI Technologies Inc Unknown device 9589 [VGA compatible controller]

Отсутствие названия устройства в pci.ids в этом случае не должно
вызывать проблем (хотя, возможно, в каких-то файлах, используемых
конфигуратором X, нет нужного идентификатора, в результате чего
автоматически не создаётся правильный xorg.conf с указанием драйвера
fglrx).

> так еще и контроллер Marvell PATA не опознался,
> ввиду чего у меня нет DVD.

Пора переходить на SATA - на современных платах PATA поддерживается
довольно криво (хотя вроде бы контроллер Marvell лучше, чем
используемые на большинстве плат чипы от JMicron).

> ata_generic generic    Marvell Technology Group Ltd. Unknown device 6121 [IDE interface storage controller]

Попробуйте установить ядро kernel-image-std-smp 2.6.18-alt10 - в этой
сборке был как раз добавлен идентификатор 11ab:6121 для модуля
pata_marvell (сам модуль был и в предыдущих сборках, но PCI ID для
этого варианта в таблице отсутствовал).

На старом ядре можно попытаться обойти отсутствие PCI ID в таблице,
выполнив после загрузки модуля pata_marvell команду:

	echo "0x11ab 0x6121" >/sys/bus/pci/drivers/pata_marvell/new_id

В последних версиях установщика это можно сделать даже в первой стадии
(на 2 консоли запущен урезанный shell, modprobe там не работает, но
можно выбрать нужный модуль в интерфейсе установщика, а после
добавления PCI ID выбрать этот же модуль ещё раз).

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [Comm] Проблемы с Marvell 88SE61xx на MB ASUS P5K WS
  2007-12-29  7:58     ` Sergey Vlasov
@ 2007-12-29 10:16       ` Maxim Ivanov
  2007-12-30 21:03         ` Sergey Vlasov
  0 siblings, 1 reply; 7+ messages in thread
From: Maxim Ivanov @ 2007-12-29 10:16 UTC (permalink / raw)
  To: ALT Linux Community general discussions

Sergey Vlasov пишет:
> On Sat, Dec 29, 2007 at 10:13:07AM +0300, Maxim Ivanov wrote:
>   
>> Ну вот, выкладываю на общее обозрение выкрутасы
>> материнской платы ASUS P5K WS.
>>
>> Легко можно наблюдать, что оборудование не опознано.
>> Мало того, что карточка ATI 2600 Pro не опозналась,
>>     
>
> Как раз опозналось, раз определился модуль fglrx:
>
>   
>> fglrx                  ATI Technologies Inc Unknown device 9589 [VGA compatible controller]
>>     
>
> Отсутствие названия устройства в pci.ids в этом случае не должно
> вызывать проблем (хотя, возможно, в каких-то файлах, используемых
> конфигуратором X, нет нужного идентификатора, в результате чего
> автоматически не создаётся правильный xorg.conf с указанием драйвера
> fglrx).
>   
Поправил xorg.conf

Section "Device"
        Identifier  "Card0|0"
        Driver      "fglrx"
EndSection

Иксы перестали грузиться совсем.
"Девице нот фаунд".
>   
>> так еще и контроллер Marvell PATA не опознался,
>> ввиду чего у меня нет DVD.
>>     
>
> Пора переходить на SATA - на современных платах PATA поддерживается
> довольно криво (хотя вроде бы контроллер Marvell лучше, чем
> используемые на большинстве плат чипы от JMicron).
>   

По факту - в наличии привод Пионер. Другого нет. Лишних денег - тоже.
>   
>> ata_generic generic    Marvell Technology Group Ltd. Unknown device 6121 [IDE interface storage controller]
>>     
>
> Попробуйте установить ядро kernel-image-std-smp 2.6.18-alt10 - в этой
> сборке был как раз добавлен идентификатор 11ab:6121 для модуля
> pata_marvell (сам модуль был и в предыдущих сборках, но PCI ID для
> этого варианта в таблице отсутствовал).
>   

Поставил это ядро и модули к нему.
Результат - нулевой. Привода DVD нет.
Ункоун дивайс.

Таким образом - все? Больше вариантов нет?
________________
Максим Иванов


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [Comm] Проблемы с Marvell 88SE61xx на MB ASUS P5K WS
  2007-12-29 10:16       ` Maxim Ivanov
@ 2007-12-30 21:03         ` Sergey Vlasov
  0 siblings, 0 replies; 7+ messages in thread
From: Sergey Vlasov @ 2007-12-30 21:03 UTC (permalink / raw)
  To: community

[-- Attachment #1: Type: text/plain, Size: 906 bytes --]

On Sat, Dec 29, 2007 at 01:16:17PM +0300, Maxim Ivanov wrote:
> Section "Device"
>         Identifier  "Card0|0"
>         Driver      "fglrx"
> EndSection
> 
> Иксы перестали грузиться совсем.
> "Девице нот фаунд".

Покажите вывод rpm -q fglrx_glx и содержимое /var/log/Xorg.0.log после
попытки запуска X.

> > Попробуйте установить ядро kernel-image-std-smp 2.6.18-alt10 - в этой
> > сборке был как раз добавлен идентификатор 11ab:6121 для модуля
> > pata_marvell (сам модуль был и в предыдущих сборках, но PCI ID для
> > этого варианта в таблице отсутствовал).
> >   
> 
> Поставил это ядро и модули к нему.
> Результат - нулевой. Привода DVD нет.
> Ункоун дивайс.

dmesg и lspci -vvnn при загрузке именно с 2.6.18-std-smp-alt10 в
студию.  Ещё на всякий случай проверьте, что модуль pata_marvell
загрузился (его должен был бы загрузить как минимум udevd при
загрузке системы).

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2007-12-30 21:03 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-12-28 19:59 [Comm] Проблемы с Marvell 88SE61xx на MB ASUS P5K WS Maxim Ivanov
2007-12-28 20:11 ` Хихин Руслан
2007-12-28 20:24   ` Maxim Ivanov
2007-12-29  7:13   ` Maxim Ivanov
2007-12-29  7:58     ` Sergey Vlasov
2007-12-29 10:16       ` Maxim Ivanov
2007-12-30 21:03         ` Sergey Vlasov

ALT Linux Community general discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
		mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
	public-inbox-index community

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.community


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git