* [Comm] wine & twain @ 2007-12-19 12:43 Алексей Шенцев 2007-12-19 12:46 ` Шишков Евгений 0 siblings, 1 reply; 27+ messages in thread From: Алексей Шенцев @ 2007-12-19 12:43 UTC (permalink / raw) To: ALT Linux Community general discussions; +Cc: Vitaly Lipatov Всем привет! Такой вопрос: как в wine подключить сканер? В линуксе его вижу: [root@oasu3 /]# scanimage -L | grep scan device `snapscan:libusb:005:003' is a EPSON EPSON Scanner flatbed scanner [root@oasu3 /]# -- С уважением Шенцев Алексей Владимирович. E-mail: ashen@nsrz.ru XMPP: ashen@altlinux.org, AlexShen@jabber.ru ICQ: 271053845 ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Comm] wine & twain 2007-12-19 12:43 [Comm] wine & twain Алексей Шенцев @ 2007-12-19 12:46 ` Шишков Евгений 2007-12-19 13:23 ` Алексей Шенцев 0 siblings, 1 reply; 27+ messages in thread From: Шишков Евгений @ 2007-12-19 12:46 UTC (permalink / raw) To: ALT Linux Community general discussions Алексей Шенцев пишет: > Всем привет! > Такой вопрос: как в wine подключить сканер? В линуксе его вижу: > [root@oasu3 /]# scanimage -L | grep scan > device `snapscan:libusb:005:003' is a EPSON EPSON Scanner flatbed scanner > [root@oasu3 /]# Руки не дошли попробовать. Но есть такой пакет как libwine-twain ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Comm] wine & twain 2007-12-19 12:46 ` Шишков Евгений @ 2007-12-19 13:23 ` Алексей Шенцев 2007-12-19 13:49 ` Шишков Евгений 0 siblings, 1 reply; 27+ messages in thread From: Алексей Шенцев @ 2007-12-19 13:23 UTC (permalink / raw) To: ALT Linux Community general discussions В сообщении от Wednesday 19 December 2007 15:46:10 Шишков Евгений написал(а): > Алексей Шенцев пишет: > > Всем привет! > > Такой вопрос: как в wine подключить сканер? В линуксе его вижу: > > [root@oasu3 /]# scanimage -L | grep scan > > device `snapscan:libusb:005:003' is a EPSON EPSON Scanner flatbed scanner > > [root@oasu3 /]# > > Руки не дошли попробовать. > Но есть такой пакет как libwine-twain Ну стоит он у меня: [root@oasu3 /]# rpm -qa | grep wine | sort docs-wine_intro-0.1-alt1 docs-wine_intro-kirill-060307-alt1 libwine-20070302-alt1 libwine-twain-20070302-alt1 wine-20070302-alt1 wine-docs-0.9.11-alt0.1 [root@oasu3 /]# И содержит он: [root@oasu3 /]# rpm -ql libwine-twain /usr/lib/wine/gphoto2.ds.so /usr/lib/wine/sane.ds.so /usr/lib/wine/twain.dll16 /usr/lib/wine/twain_32.dll.so [root@oasu3 /]# А дальше то что? -- С уважением Шенцев Алексей Владимирович. E-mail: ashen@nsrz.ru XMPP: ashen@altlinux.org, AlexShen@jabber.ru ICQ: 271053845 ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Comm] wine & twain 2007-12-19 13:23 ` Алексей Шенцев @ 2007-12-19 13:49 ` Шишков Евгений 2007-12-19 13:57 ` Алексей Шенцев 0 siblings, 1 reply; 27+ messages in thread From: Шишков Евгений @ 2007-12-19 13:49 UTC (permalink / raw) To: ALT Linux Community general discussions Алексей Шенцев пишет: > В сообщении от Wednesday 19 December 2007 15:46:10 Шишков Евгений написал(а): >> Алексей Шенцев пишет: >>> Всем привет! >>> Такой вопрос: как в wine подключить сканер? В линуксе его вижу: >>> [root@oasu3 /]# scanimage -L | grep scan >>> device `snapscan:libusb:005:003' is a EPSON EPSON Scanner flatbed scanner >>> [root@oasu3 /]# >> Руки не дошли попробовать. >> Но есть такой пакет как libwine-twain > > Ну стоит он у меня: > [root@oasu3 /]# rpm -qa | grep wine | sort > docs-wine_intro-0.1-alt1 > docs-wine_intro-kirill-060307-alt1 > libwine-20070302-alt1 > libwine-twain-20070302-alt1 > wine-20070302-alt1 > wine-docs-0.9.11-alt0.1 > [root@oasu3 /]# > > И содержит он: > [root@oasu3 /]# rpm -ql libwine-twain > /usr/lib/wine/gphoto2.ds.so > /usr/lib/wine/sane.ds.so > /usr/lib/wine/twain.dll16 > /usr/lib/wine/twain_32.dll.so > [root@oasu3 /]# > > А дальше то что? Дальше и не знаю. Наверное к Виталию Липатову вопрос... ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Comm] wine & twain 2007-12-19 13:49 ` Шишков Евгений @ 2007-12-19 13:57 ` Алексей Шенцев 2007-12-19 21:22 ` Vitaly Lipatov 0 siblings, 1 reply; 27+ messages in thread From: Алексей Шенцев @ 2007-12-19 13:57 UTC (permalink / raw) To: ALT Linux Community general discussions В сообщении от Wednesday 19 December 2007 16:49:05 Шишков Евгений написал(а): > Алексей Шенцев пишет: > > А дальше то что? > Дальше и не знаю. > Наверное к Виталию Липатову вопрос... Дык сразу и задал ему cc: в первом письме. Дело в том, что у меня Epson perfection 1270. xsane на нём виснет. kooka видит сканер, но в ней он не активен. Попробовал запустить FR - вылетает ни чего не сказав. Сейчас пробую CuneiForm. Всё бы хорошо, но она не видит сканер. -- С уважением Шенцев Алексей Владимирович. E-mail: ashen@nsrz.ru XMPP: ashen@altlinux.org, AlexShen@jabber.ru ICQ: 271053845 ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Comm] wine & twain 2007-12-19 13:57 ` Алексей Шенцев @ 2007-12-19 21:22 ` Vitaly Lipatov 2007-12-20 6:17 ` Алексей Шенцев 0 siblings, 1 reply; 27+ messages in thread From: Vitaly Lipatov @ 2007-12-19 21:22 UTC (permalink / raw) To: ALT Linux Community general discussions On 19 декабря 2007, Алексей Шенцев wrote: > В сообщении от Wednesday 19 December 2007 16:49:05 Шишков Евгений написал(а): > > Алексей Шенцев пишет: > > > А дальше то что? > > > > Дальше и не знаю. > > Наверное к Виталию Липатову вопрос... > > Дык сразу и задал ему cc: в первом письме. Дело в том, что у Просто знайте, что если бы я знал, как увидеть сканер в twain, он бы у вас заработал без вопросов из коробки. > меня Epson perfection 1270. xsane на нём виснет. kooka видит У нас есть только один интерфейс к сканерам, называется SANE. Всё остальное работает через него. Если и виснет что-то, то виснет sane. В противном случае что там про scanimage -L > хорошо, но она не видит сканер. P.S. Пока стоит не спрашивать о работе со сканером в wine. Рассказать - пожалуйста. -- С уважением, Виталий Липатов Санкт-Петербург GNU! ALT Linux Team! WINE! LaTeX! LyX! http://freesource.info ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Comm] wine & twain 2007-12-19 21:22 ` Vitaly Lipatov @ 2007-12-20 6:17 ` Алексей Шенцев 2007-12-20 7:46 ` Vitaly Lipatov 0 siblings, 1 reply; 27+ messages in thread From: Алексей Шенцев @ 2007-12-20 6:17 UTC (permalink / raw) To: ALT Linux Community general discussions; +Cc: Vitaly Lipatov В сообщении от Thursday 20 December 2007 00:22:48 Vitaly Lipatov написал(а): > Просто знайте, что если бы я знал, как увидеть сканер в twain, он > бы у вас заработал без вопросов из коробки. Да уж, это было бы самое наилучшее ... :) > У нас есть только один интерфейс к сканерам, называется SANE. Всё > остальное работает через него. Если и виснет что-то, то виснет > sane. Про это я читал на etersoft.ru > В противном случае что там про scanimage -L [root@oasu3 /]# scanimage -L | grep scan device `snapscan:libusb:005:003' is a EPSON EPSON Scanner flatbed scanner [root@oasu3 /]# > P.S. > Пока стоит не спрашивать о работе со сканером в wine. > Рассказать - пожалуйста. Ну тогда расскажите ... :) Если надо предоставить ещё какие либо сведения, скажите, предоставлю. -- С уважением Шенцев Алексей Владимирович. E-mail: ashen@nsrz.ru XMPP: ashen@altlinux.org, AlexShen@jabber.ru ICQ: 271053845 ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Comm] wine & twain 2007-12-20 6:17 ` Алексей Шенцев @ 2007-12-20 7:46 ` Vitaly Lipatov 2007-12-20 8:20 ` [Comm] SANE & Epson Perfection 1270 Алексей Шенцев 2007-12-21 9:58 ` [Comm] wine & twain Yury Aliaev 0 siblings, 2 replies; 27+ messages in thread From: Vitaly Lipatov @ 2007-12-20 7:46 UTC (permalink / raw) To: ALT Linux Community general discussions On 20 декабря 2007, Алексей Шенцев wrote: > > В противном случае что там про scanimage -L > > [root@oasu3 /]# scanimage -L | grep scan > device `snapscan:libusb:005:003' is a EPSON EPSON Scanner > flatbed scanner [root@oasu3 /]# Ой, ну я имел в виду scanimage > file Эта команда сканирует? Потому что Perfection 1270 вроде как поддерживается и должен работать. Таким образом данную тему нужно начать с нормальной поддержки этого сканера в SANE, а потом уже переходить к twain. > > P.S. > > Пока стоит не спрашивать о работе со сканером в wine. > > Рассказать - пожалуйста. > > Ну тогда расскажите ... :) Не, _Вы_ расскажите, если знаете. Я не знаю. -- С уважением, Виталий Липатов Санкт-Петербург GNU! ALT Linux Team! WINE! LaTeX! LyX! http://freesource.info ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Comm] SANE & Epson Perfection 1270 2007-12-20 7:46 ` Vitaly Lipatov @ 2007-12-20 8:20 ` Алексей Шенцев 2007-12-20 8:44 ` Алексей Шенцев 2007-12-21 9:58 ` [Comm] wine & twain Yury Aliaev 1 sibling, 1 reply; 27+ messages in thread From: Алексей Шенцев @ 2007-12-20 8:20 UTC (permalink / raw) To: ALT Linux Community general discussions В сообщении от Thursday 20 December 2007 10:46:14 Vitaly Lipatov написал(а): > On 20 декабря 2007, Алексей Шенцев wrote: > > [root@oasu3 /]# scanimage -L | grep scan > > device `snapscan:libusb:005:003' is a EPSON EPSON Scanner > > flatbed scanner [root@oasu3 /]# > Ой, ну я имел в виду > scanimage > file > Эта команда сканирует? -(ashen@oasu3)-(~/tmp)-> scanimage > prb.jpg scanimage: open of device snapscan:libusb:005:004 failed: Error during device I/O -(ashen@oasu3)-(~/tmp)-> И сканер переходит в не рабочее состояние. Помогает только сброс питания. > Потому что Perfection 1270 вроде как поддерживается и должен > работать. Должен, да не обязан. > Таким образом данную тему нужно начать с нормальной поддержки > этого сканера в SANE, а потом уже переходить к twain. Настройку сканера делал по http://lists.altlinux.org/pipermail/junior/2007-August/001025.html Система выдаёт: -(ashen@oasu3)-(~/tmp)-> sane-find-scanner && scanimage -L # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. # Also you need support for SCSI Generic (sg) in your operating system. # If using Linux, try "modprobe sg". found USB scanner (vendor=0x04b8 [EPSON], product=0x0120 [EPSON Scanner]) at libusb:005:005 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. # You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary. device `snapscan:libusb:005:005' is a EPSON EPSON Scanner flatbed scanner -(ashen@oasu3)-(~/tmp)-> Вроде всё в норме. Или чего то не хватает? -- С уважением Шенцев Алексей Владимирович. E-mail: ashen@nsrz.ru XMPP: ashen@altlinux.org, AlexShen@jabber.ru ICQ: 271053845 ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Comm] SANE & Epson Perfection 1270 2007-12-20 8:20 ` [Comm] SANE & Epson Perfection 1270 Алексей Шенцев @ 2007-12-20 8:44 ` Алексей Шенцев 2007-12-20 12:12 ` Алексей Шенцев 0 siblings, 1 reply; 27+ messages in thread From: Алексей Шенцев @ 2007-12-20 8:44 UTC (permalink / raw) To: ALT Linux Community general discussions Тест сканера выдал такое: -(ashen@oasu3)-(~/tmp)-> scanimage -pT [snapscan] Scanner warming up - waiting 9 seconds. [snapscan] Scanner warming up - waiting 35 seconds. scanimage: sane_start: Error during device I/O -(ashen@oasu3)-(~/tmp)-> -- С уважением Шенцев Алексей Владимирович. E-mail: ashen@nsrz.ru XMPP: ashen@altlinux.org, AlexShen@jabber.ru ICQ: 271053845 ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Comm] SANE & Epson Perfection 1270 2007-12-20 8:44 ` Алексей Шенцев @ 2007-12-20 12:12 ` Алексей Шенцев 2007-12-20 12:46 ` Алексей Шенцев 2007-12-20 13:27 ` Владимир Черный 0 siblings, 2 replies; 27+ messages in thread From: Алексей Шенцев @ 2007-12-20 12:12 UTC (permalink / raw) To: ALT Linux Community general discussions В общем полные не понятки с этим сканером и SANE. делаю несколько раз подряд, перед выполнением команды приходится сбрасывать сканер и получаю такое: [root@oasu3 /]# scanimage -pL device `snapscan:libusb:005:003' is a EPSON EPSON Scanner flatbed scanner [root@oasu3 /]# scanimage -p --list-devices device `snapscan:libusb:005:005' is a EPSON EPSON Scanner flatbed scanner [root@oasu3 /]# scanimage -pL --list-devices device `snapscan:libusb:005:007' is a EPSON EPSON Scanner flatbed scanner [root@oasu3 /]# Конечно команды не много разные, но и так видно, что сканер "скачет" по libusb:005:00X. Может ли это влиять на работу системы SANE? -- С уважением Шенцев Алексей Владимирович. E-mail: ashen@nsrz.ru XMPP: ashen@altlinux.org, AlexShen@jabber.ru ICQ: 271053845 ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Comm] SANE & Epson Perfection 1270 2007-12-20 12:12 ` Алексей Шенцев @ 2007-12-20 12:46 ` Алексей Шенцев 2007-12-20 13:27 ` Владимир Черный 1 sibling, 0 replies; 27+ messages in thread From: Алексей Шенцев @ 2007-12-20 12:46 UTC (permalink / raw) To: ALT Linux Community general discussions Читаю на: http://www.epson.ru/products/scanners/default.asp?id={BFCDD24E-C8E4-4348-9ED6-7003B73AA491} ПО для Linux можно скачать по ссылке http://www.avasys.jp/english/linux_e/dl_scan.html, заполнив специальную форму-запрос Захожу туда и не вижу модель 1270. Какая же модель наиболее близка к сабжу, кто-нибудь может подсказать? -- С уважением Шенцев Алексей Владимирович. E-mail: ashen@nsrz.ru XMPP: ashen@altlinux.org, AlexShen@jabber.ru ICQ: 271053845 ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Comm] SANE & Epson Perfection 1270 2007-12-20 12:12 ` Алексей Шенцев 2007-12-20 12:46 ` Алексей Шенцев @ 2007-12-20 13:27 ` Владимир Черный 2007-12-20 14:16 ` Алексей Шенцев 1 sibling, 1 reply; 27+ messages in thread From: Владимир Черный @ 2007-12-20 13:27 UTC (permalink / raw) To: ALT Linux Community general discussions 20.12.07, Алексей Шенцев<ashen@nsrz.ru> написал(а): > В общем полные не понятки с этим сканером и SANE. > делаю несколько раз подряд, перед выполнением команды приходится сбрасывать > сканер и получаю такое: > [root@oasu3 /]# scanimage -pL > device `snapscan:libusb:005:003' is a EPSON EPSON Scanner flatbed scanner > [root@oasu3 /]# scanimage -p --list-devices > device `snapscan:libusb:005:005' is a EPSON EPSON Scanner flatbed scanner > [root@oasu3 /]# scanimage -pL --list-devices > device `snapscan:libusb:005:007' is a EPSON EPSON Scanner flatbed scanner > [root@oasu3 /]# > > Конечно команды не много разные, но и так видно, что сканер "скачет" по > libusb:005:00X. > Может ли это влиять на работу системы SANE? Да, в положительном смысле. Повидимому какая-то блокировка не отдается. Я через xsane пробовал, так вот ее тоже надо перегружать после передергивания сканера, точнее закрыть, переткнуть сканет и включить. Обратите внимание на галочку калибровки в xsane, если ее не убрать - xsane виснет. Железки под рукой нет, поэтому что-то еще попробовать не могу. > -- > С уважением Шенцев Алексей Владимирович. > E-mail: ashen@nsrz.ru > XMPP: ashen@altlinux.org, AlexShen@jabber.ru > ICQ: 271053845 > _______________________________________________ > community mailing list > community@lists.altlinux.org > https://lists.altlinux.org/mailman/listinfo/community -- С уважением, Владимир Черный Начальник отдела образовательных проектов ALT Linux mailto: black at altlinux.ru Jabber: black at altlinux.org ICQ: 199158712 ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Comm] SANE & Epson Perfection 1270 2007-12-20 13:27 ` Владимир Черный @ 2007-12-20 14:16 ` Алексей Шенцев 2007-12-21 7:56 ` Алексей Шенцев 0 siblings, 1 reply; 27+ messages in thread From: Алексей Шенцев @ 2007-12-20 14:16 UTC (permalink / raw) To: ALT Linux Community general discussions В сообщении от Thursday 20 December 2007 16:27:49 Владимир Черный написал(а): > Да, в положительном смысле. Повидимому какая-то блокировка не отдается. Хм ... > Я через xsane пробовал, так вот ее тоже надо перегружать после > передергивания сканера, точнее закрыть, переткнуть сканет и включить. > Обратите внимание на галочку калибровки в xsane, если ее не убрать - > xsane виснет. Я внимательно читал всё, что вы писали про данный сканер. > Железки под рукой нет, поэтому что-то еще попробовать не могу. Ну она вот у меня сейчас стоит на столе. Так что могу с ней экспериментировать во всю. Только скажите что ещё надо подёргать? Подёргаю о результатах сообщу. -- С уважением Шенцев Алексей Владимирович. E-mail: ashen@nsrz.ru XMPP: ashen@altlinux.org, AlexShen@jabber.ru ICQ: 271053845 ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Comm] SANE & Epson Perfection 1270 2007-12-20 14:16 ` Алексей Шенцев @ 2007-12-21 7:56 ` Алексей Шенцев 2007-12-21 8:07 ` Владимир Черный 0 siblings, 1 reply; 27+ messages in thread From: Алексей Шенцев @ 2007-12-21 7:56 UTC (permalink / raw) To: ALT Linux Community general discussions Продолжаю разборки с этим сканером. При перезапуске сервиса hotplug в /var/log/messages выводится такое: Dec 21 10:22:42 oasu3 usb.rc: chown: cannot access `/proc/bus/usb/001/005': No such file or directory Dec 21 10:22:42 oasu3 usb.rc: chmod: cannot access `/proc/bus/usb/001/005': No such file or directory Т.е. нет доступа к сканеру. На http://alien.slackbook.org/dokuwiki/doku.php?id=slackware:fixes#usb_scanner_and_hotplug сказано, что это ошибка в скрипте /etc/hotplug/usb.rc. Рецепт: в /etc/hotplug/usb.rc строку devbus=$( ( echo -n 000 ; cat $devlink/../../devnum ) | grep -o ...\$ ) заменить на devbus=$( ( echo -n 000`echo $devlink| sed 's/^.*usb\([0-9]\+\)\/.*$/\1/'` ) | grep -o ...\$ ) После перегрузки hotplug'а сообщение usb.rc: chown: cannot access из системного журнала исчезает. Бага? Команды sane-find-scanner и scanimage -L выдают ту же информацию, что выдавали до правки /etc/hotplug/usb.rc И scanimage -L так же переводит сканер в не рабочее состояние, помогает только сброс питания. После чего [root@oasu3 /]# scanimage -pT scanimage: open of device snapscan:libusb:005:007 failed: Access to resource has been denied [root@oasu3 /]# И сканер снова в не рабочем состоянии. Перезапуск hotplug'а не помогает. Только сброс по питанию. Куда ещё смотреть и что сделать, что бы этот сканер у нас работал? Ведь такой сканер часто встречается. -- С уважением Шенцев Алексей Владимирович. E-mail: ashen@nsrz.ru XMPP: ashen@altlinux.org, AlexShen@jabber.ru ICQ: 271053845 ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Comm] SANE & Epson Perfection 1270 2007-12-21 7:56 ` Алексей Шенцев @ 2007-12-21 8:07 ` Владимир Черный 2007-12-21 8:52 ` Алексей Шенцев 0 siblings, 1 reply; 27+ messages in thread From: Владимир Черный @ 2007-12-21 8:07 UTC (permalink / raw) To: ALT Linux Community general discussions 21.12.07, Алексей Шенцев<ashen@nsrz.ru> написал(а): > Продолжаю разборки с этим сканером. > При перезапуске сервиса hotplug в /var/log/messages выводится такое: > Dec 21 10:22:42 oasu3 usb.rc: chown: cannot access `/proc/bus/usb/001/005': No > such file or directory > Dec 21 10:22:42 oasu3 usb.rc: chmod: cannot access `/proc/bus/usb/001/005': No > such file or directory > Т.е. нет доступа к сканеру. На > http://alien.slackbook.org/dokuwiki/doku.php?id=slackware:fixes#usb_scanner_and_hotplug > сказано, что это ошибка в скрипте /etc/hotplug/usb.rc. > Рецепт: > в /etc/hotplug/usb.rc > строку > devbus=$( ( echo -n 000 ; cat $devlink/../../devnum ) | grep -o ...\$ ) > заменить на > devbus=$( ( echo -n 000`echo $devlink| sed 's/^.*usb\([0-9]\+\)\/.*$/\1/'` ) | > grep -o ...\$ ) > > После перегрузки hotplug'а сообщение usb.rc: chown: cannot access из > системного журнала исчезает. Бага? Скорее патч :) Но тоже может оказаться полезным. - в багзиллу запись сделайте! > Команды sane-find-scanner и scanimage -L выдают ту же информацию, что выдавали > до правки /etc/hotplug/usb.rc И scanimage -L так же переводит сканер в не > рабочее состояние, помогает только сброс питания. После чего > [root@oasu3 /]# scanimage -pT > scanimage: open of device snapscan:libusb:005:007 failed: Access to resource > has been denied > [root@oasu3 /]# > И сканер снова в не рабочем состоянии. Перезапуск hotplug'а не помогает. > Только сброс по питанию. А те же команды от пользователя производят аналогичный эффект? А если после передергивания шнура запустить xsane без проверок удается сосканировать? > Куда ещё смотреть и что сделать, что бы этот сканер у нас работал? Ведь такой > сканер часто встречается. Он встречается в школах, где я на него и наткнулся дважды... но у нас (в Альте) нигде нет. Так что пока надежда на вашу "упертость" в поисках истины. Плоды уже видны :) > -- > С уважением Шенцев Алексей Владимирович. > E-mail: ashen@nsrz.ru > XMPP: ashen@altlinux.org, AlexShen@jabber.ru > ICQ: 271053845 > _______________________________________________ > community mailing list > community@lists.altlinux.org > https://lists.altlinux.org/mailman/listinfo/community -- С уважением, Владимир Черный Начальник отдела образовательных проектов ALT Linux mailto: black at altlinux.ru Jabber: black at altlinux.org ICQ: 199158712 ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Comm] SANE & Epson Perfection 1270 2007-12-21 8:07 ` Владимир Черный @ 2007-12-21 8:52 ` Алексей Шенцев 2007-12-21 9:38 ` Алексей Шенцев 2007-12-21 16:08 ` Victor 0 siblings, 2 replies; 27+ messages in thread From: Алексей Шенцев @ 2007-12-21 8:52 UTC (permalink / raw) To: ALT Linux Community general discussions В сообщении от Friday 21 December 2007 11:07:49 Владимир Черный написал(а): > 21.12.07, Алексей Шенцев<ashen@nsrz.ru> написал(а): > > После перегрузки hotplug'а сообщение usb.rc: chown: cannot access из > > системного журнала исчезает. Бага? > Скорее патч :) Но тоже может оказаться полезным. - в багзиллу запись > сделайте! Bug#: 13759 > А те же команды от пользователя производят аналогичный эффект? sane-find-scanner отрабатывает нормально. -(ashen@oasu3)-(~)-> scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). -(ashen@oasu3)-(~)-> > А если после передергивания шнура запустить xsane без проверок удается > сосканировать? Из под рута ругается, что доступ к сканеру запрещён. Так же из под пользователя. И сканер уходит в нерабочее состояние. > > Куда ещё смотреть и что сделать, что бы этот сканер у нас работал? Ведь > > такой сканер часто встречается. > Он встречается в школах, где я на него и наткнулся дважды... но у нас > (в Альте) нигде нет. Так что пока надежда на вашу "упертость" в > поисках истины. Угу ... Этот сканер, вместе с FineReader'ом, единственное, что держит меня от сноса винды дома. Замена FineReader'у есть - CuneiForm сейчас FreeWare, и у меня под wine'ом она запустилась, но не видит сканера. Осталось только запустить сканер. > Плоды уже видны :) Если бы ... :-S -- С уважением Шенцев Алексей Владимирович. E-mail: ashen@nsrz.ru XMPP: ashen@altlinux.org, AlexShen@jabber.ru ICQ: 271053845 ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Comm] SANE & Epson Perfection 1270 2007-12-21 8:52 ` Алексей Шенцев @ 2007-12-21 9:38 ` Алексей Шенцев 2007-12-21 10:38 ` Владимир Черный 2007-12-21 16:08 ` Victor 1 sibling, 1 reply; 27+ messages in thread From: Алексей Шенцев @ 2007-12-21 9:38 UTC (permalink / raw) To: ALT Linux Community general discussions Есть подозрение, что в отказ в доступе возникает вот из-за этого: [root@oasu3 /]# ls -al /dev/*usb* crw-rw-rw- 1 root root 189, 0 Дек 21 2007 /dev/usb1 crw-rw-rw- 1 root root 189, 128 Дек 21 2007 /dev/usb2 crw-rw-rw- 1 root root 189, 256 Дек 21 2007 /dev/usb3 crw-rw-rw- 1 root root 189, 384 Дек 21 2007 /dev/usb4 crw-rw-rw- 1 root root 189, 512 Дек 21 2007 /dev/usb5 crw-rw-rw- 1 root root 254, 0 Дек 21 2007 /dev/usbdev1.1_ep00 crw-rw-rw- 1 root root 254, 1 Дек 21 2007 /dev/usbdev1.1_ep81 crw-rw-rw- 1 root root 254, 2 Дек 21 2007 /dev/usbdev2.1_ep00 crw-rw-rw- 1 root root 254, 3 Дек 21 2007 /dev/usbdev2.1_ep81 crw-rw-rw- 1 root root 254, 4 Дек 21 2007 /dev/usbdev3.1_ep00 crw-rw-rw- 1 root root 254, 5 Дек 21 2007 /dev/usbdev3.1_ep81 crw-rw-rw- 1 root root 254, 6 Дек 21 2007 /dev/usbdev4.1_ep00 crw-rw-rw- 1 root root 254, 7 Дек 21 2007 /dev/usbdev4.1_ep81 crw-rw---- 1 root root 254, 10 Дек 21 12:22 /dev/usbdev5.16_ep00 crw-rw---- 1 root root 254, 12 Дек 21 12:22 /dev/usbdev5.16_ep02 crw-rw---- 1 root root 254, 11 Дек 21 12:22 /dev/usbdev5.16_ep81 crw-rw---- 1 root root 254, 13 Дек 21 12:22 /dev/usbdev5.16_ep83 crw-rw-rw- 1 root root 254, 8 Дек 21 2007 /dev/usbdev5.1_ep00 crw-rw-rw- 1 root root 254, 9 Дек 21 2007 /dev/usbdev5.1_ep81 Права 666 это уж я ставил ручками. А вот когда у сканера передёргиваешь питание, он появляется в /dev/usb/ вот с такими правами: crw-rw---- 1 root root 254, 10 Дек 21 12:22 /dev/usbdev5.16_ep00 crw-rw---- 1 root root 254, 12 Дек 21 12:22 /dev/usbdev5.16_ep02 crw-rw---- 1 root root 254, 11 Дек 21 12:22 /dev/usbdev5.16_ep81 crw-rw---- 1 root root 254, 13 Дек 21 12:22 /dev/usbdev5.16_ep83 Т.е 660 root : root. Как я понял для sane доступ к сканеру должен выглядить так: crw-rw---- 1 root scanner 254, 10 Дек 21 12:22 /dev/usbdev5.16_ep00 crw-rw---- 1 root scanner 254, 12 Дек 21 12:22 /dev/usbdev5.16_ep02 crw-rw---- 1 root scanner 254, 11 Дек 21 12:22 /dev/usbdev5.16_ep81 crw-rw---- 1 root scanner 254, 13 Дек 21 12:22 /dev/usbdev5.16_ep83 Пробывал выставлять 666 root : scanner . Результат один и тот же: [root@oasu3 /]# chown root:scanner /dev/usbdev5* [root@oasu3 /]# chmod 666 /dev/usbdev5* [root@oasu3 /]# ls -al /dev/*usb* crw-rw-rw- 1 root root 189, 0 Дек 21 2007 /dev/usb1 crw-rw-rw- 1 root root 189, 128 Дек 21 2007 /dev/usb2 crw-rw-rw- 1 root root 189, 256 Дек 21 2007 /dev/usb3 crw-rw-rw- 1 root root 189, 384 Дек 21 2007 /dev/usb4 crw-rw-rw- 1 root root 189, 512 Дек 21 2007 /dev/usb5 crw-rw-rw- 1 root root 254, 0 Дек 21 2007 /dev/usbdev1.1_ep00 crw-rw-rw- 1 root root 254, 1 Дек 21 2007 /dev/usbdev1.1_ep81 crw-rw-rw- 1 root root 254, 2 Дек 21 2007 /dev/usbdev2.1_ep00 crw-rw-rw- 1 root root 254, 3 Дек 21 2007 /dev/usbdev2.1_ep81 crw-rw-rw- 1 root root 254, 4 Дек 21 2007 /dev/usbdev3.1_ep00 crw-rw-rw- 1 root root 254, 5 Дек 21 2007 /dev/usbdev3.1_ep81 crw-rw-rw- 1 root root 254, 6 Дек 21 2007 /dev/usbdev4.1_ep00 crw-rw-rw- 1 root root 254, 7 Дек 21 2007 /dev/usbdev4.1_ep81 crw-rw-rw- 1 root scanner 254, 10 Дек 21 12:29 /dev/usbdev5.17_ep00 crw-rw-rw- 1 root scanner 254, 12 Дек 21 12:29 /dev/usbdev5.17_ep02 crw-rw-rw- 1 root scanner 254, 11 Дек 21 12:29 /dev/usbdev5.17_ep81 crw-rw-rw- 1 root scanner 254, 13 Дек 21 12:29 /dev/usbdev5.17_ep83 crw-rw-rw- 1 root scanner 254, 8 Дек 21 2007 /dev/usbdev5.1_ep00 crw-rw-rw- 1 root scanner 254, 9 Дек 21 2007 /dev/usbdev5.1_ep81 [root@oasu3 /]# scanimage -pT scanimage: open of device snapscan:libusb:005:017 failed: Access to resource has been denied [root@oasu3 /]# [root@oasu3 /]# ls -al /dev/*usb*5* crw-rw-rw- 1 root root 189, 512 Дек 21 2007 /dev/usb5 crw-rw-rw- 1 root scanner 254, 10 Дек 21 12:29 /dev/usbdev5.17_ep00 crw-rw---- 1 root root 254, 12 Дек 21 12:31 /dev/usbdev5.17_ep02 crw-rw---- 1 root root 254, 11 Дек 21 12:31 /dev/usbdev5.17_ep81 crw-rw---- 1 root root 254, 13 Дек 21 12:31 /dev/usbdev5.17_ep83 crw-rw-rw- 1 root scanner 254, 8 Дек 21 2007 /dev/usbdev5.1_ep00 crw-rw-rw- 1 root scanner 254, 9 Дек 21 2007 /dev/usbdev5.1_ep81 [root@oasu3 /]# Как видно из приведённого полсе выполнения scanimage -pT права на сканер становятся: crw-rw---- 1 root root 254, 12 Дек 21 12:31 /dev/usbdev5.17_ep02 crw-rw---- 1 root root 254, 11 Дек 21 12:31 /dev/usbdev5.17_ep81 crw-rw---- 1 root root 254, 13 Дек 21 12:31 /dev/usbdev5.17_ep83 Хотя до этого были crw-rw-rw- 1 root scanner 254, 10 Дек 21 12:29 /dev/usbdev5.17_ep00 crw-rw-rw- 1 root scanner 254, 12 Дек 21 12:29 /dev/usbdev5.17_ep02 crw-rw-rw- 1 root scanner 254, 11 Дек 21 12:29 /dev/usbdev5.17_ep81 crw-rw-rw- 1 root scanner 254, 13 Дек 21 12:29 /dev/usbdev5.17_ep83 В чём может быть загвоздка? Куда смотреть? Я понимаю, что надо смотреть в строну udev и его правил. Вроде в его правилах указывал права 666, но всё едино ... :-S -- С уважением Шенцев Алексей Владимирович. E-mail: ashen@nsrz.ru XMPP: ashen@altlinux.org, AlexShen@jabber.ru ICQ: 271053845 ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Comm] SANE & Epson Perfection 1270 2007-12-21 9:38 ` Алексей Шенцев @ 2007-12-21 10:38 ` Владимир Черный 2008-01-14 12:01 ` Алексей Шенцев 0 siblings, 1 reply; 27+ messages in thread From: Владимир Черный @ 2007-12-21 10:38 UTC (permalink / raw) To: ALT Linux Community general discussions 21.12.07, Алексей Шенцев<ashen@nsrz.ru> написал(а): > Есть подозрение, что в отказ в доступе возникает вот из-за этого: > [root@oasu3 /]# ls -al /dev/*usb* > crw-rw-rw- 1 root root 189, 0 Дек 21 2007 /dev/usb1 > crw-rw-rw- 1 root root 189, 128 Дек 21 2007 /dev/usb2 > crw-rw-rw- 1 root root 189, 256 Дек 21 2007 /dev/usb3 > crw-rw-rw- 1 root root 189, 384 Дек 21 2007 /dev/usb4 > crw-rw-rw- 1 root root 189, 512 Дек 21 2007 /dev/usb5 > crw-rw-rw- 1 root root 254, 0 Дек 21 2007 /dev/usbdev1.1_ep00 > crw-rw-rw- 1 root root 254, 1 Дек 21 2007 /dev/usbdev1.1_ep81 > crw-rw-rw- 1 root root 254, 2 Дек 21 2007 /dev/usbdev2.1_ep00 > crw-rw-rw- 1 root root 254, 3 Дек 21 2007 /dev/usbdev2.1_ep81 > crw-rw-rw- 1 root root 254, 4 Дек 21 2007 /dev/usbdev3.1_ep00 > crw-rw-rw- 1 root root 254, 5 Дек 21 2007 /dev/usbdev3.1_ep81 > crw-rw-rw- 1 root root 254, 6 Дек 21 2007 /dev/usbdev4.1_ep00 > crw-rw-rw- 1 root root 254, 7 Дек 21 2007 /dev/usbdev4.1_ep81 > crw-rw---- 1 root root 254, 10 Дек 21 12:22 /dev/usbdev5.16_ep00 > crw-rw---- 1 root root 254, 12 Дек 21 12:22 /dev/usbdev5.16_ep02 > crw-rw---- 1 root root 254, 11 Дек 21 12:22 /dev/usbdev5.16_ep81 > crw-rw---- 1 root root 254, 13 Дек 21 12:22 /dev/usbdev5.16_ep83 > crw-rw-rw- 1 root root 254, 8 Дек 21 2007 /dev/usbdev5.1_ep00 > crw-rw-rw- 1 root root 254, 9 Дек 21 2007 /dev/usbdev5.1_ep81 > > Права 666 это уж я ставил ручками. А вот когда у сканера передёргиваешь > питание, он появляется в /dev/usb/ вот с такими правами: > crw-rw---- 1 root root 254, 10 Дек 21 12:22 /dev/usbdev5.16_ep00 > crw-rw---- 1 root root 254, 12 Дек 21 12:22 /dev/usbdev5.16_ep02 > crw-rw---- 1 root root 254, 11 Дек 21 12:22 /dev/usbdev5.16_ep81 > crw-rw---- 1 root root 254, 13 Дек 21 12:22 /dev/usbdev5.16_ep83 > > Т.е 660 root : root. > > Как я понял для sane доступ к сканеру должен выглядить так: > crw-rw---- 1 root scanner 254, 10 Дек 21 12:22 /dev/usbdev5.16_ep00 > crw-rw---- 1 root scanner 254, 12 Дек 21 12:22 /dev/usbdev5.16_ep02 > crw-rw---- 1 root scanner 254, 11 Дек 21 12:22 /dev/usbdev5.16_ep81 > crw-rw---- 1 root scanner 254, 13 Дек 21 12:22 /dev/usbdev5.16_ep83 > > Пробывал выставлять 666 root : scanner . Результат один и тот же: > [root@oasu3 /]# chown root:scanner /dev/usbdev5* > [root@oasu3 /]# chmod 666 /dev/usbdev5* > [root@oasu3 /]# ls -al /dev/*usb* > crw-rw-rw- 1 root root 189, 0 Дек 21 2007 /dev/usb1 > crw-rw-rw- 1 root root 189, 128 Дек 21 2007 /dev/usb2 > crw-rw-rw- 1 root root 189, 256 Дек 21 2007 /dev/usb3 > crw-rw-rw- 1 root root 189, 384 Дек 21 2007 /dev/usb4 > crw-rw-rw- 1 root root 189, 512 Дек 21 2007 /dev/usb5 > crw-rw-rw- 1 root root 254, 0 Дек 21 2007 /dev/usbdev1.1_ep00 > crw-rw-rw- 1 root root 254, 1 Дек 21 2007 /dev/usbdev1.1_ep81 > crw-rw-rw- 1 root root 254, 2 Дек 21 2007 /dev/usbdev2.1_ep00 > crw-rw-rw- 1 root root 254, 3 Дек 21 2007 /dev/usbdev2.1_ep81 > crw-rw-rw- 1 root root 254, 4 Дек 21 2007 /dev/usbdev3.1_ep00 > crw-rw-rw- 1 root root 254, 5 Дек 21 2007 /dev/usbdev3.1_ep81 > crw-rw-rw- 1 root root 254, 6 Дек 21 2007 /dev/usbdev4.1_ep00 > crw-rw-rw- 1 root root 254, 7 Дек 21 2007 /dev/usbdev4.1_ep81 > crw-rw-rw- 1 root scanner 254, 10 Дек 21 12:29 /dev/usbdev5.17_ep00 > crw-rw-rw- 1 root scanner 254, 12 Дек 21 12:29 /dev/usbdev5.17_ep02 > crw-rw-rw- 1 root scanner 254, 11 Дек 21 12:29 /dev/usbdev5.17_ep81 > crw-rw-rw- 1 root scanner 254, 13 Дек 21 12:29 /dev/usbdev5.17_ep83 > crw-rw-rw- 1 root scanner 254, 8 Дек 21 2007 /dev/usbdev5.1_ep00 > crw-rw-rw- 1 root scanner 254, 9 Дек 21 2007 /dev/usbdev5.1_ep81 > [root@oasu3 /]# scanimage -pT > scanimage: open of device snapscan:libusb:005:017 failed: Access to resource > has been denied > [root@oasu3 /]# > [root@oasu3 /]# ls -al /dev/*usb*5* > crw-rw-rw- 1 root root 189, 512 Дек 21 2007 /dev/usb5 > crw-rw-rw- 1 root scanner 254, 10 Дек 21 12:29 /dev/usbdev5.17_ep00 > crw-rw---- 1 root root 254, 12 Дек 21 12:31 /dev/usbdev5.17_ep02 > crw-rw---- 1 root root 254, 11 Дек 21 12:31 /dev/usbdev5.17_ep81 > crw-rw---- 1 root root 254, 13 Дек 21 12:31 /dev/usbdev5.17_ep83 > crw-rw-rw- 1 root scanner 254, 8 Дек 21 2007 /dev/usbdev5.1_ep00 > crw-rw-rw- 1 root scanner 254, 9 Дек 21 2007 /dev/usbdev5.1_ep81 > [root@oasu3 /]# > > Как видно из приведённого полсе выполнения scanimage -pT права на сканер > становятся: > crw-rw---- 1 root root 254, 12 Дек 21 12:31 /dev/usbdev5.17_ep02 > crw-rw---- 1 root root 254, 11 Дек 21 12:31 /dev/usbdev5.17_ep81 > crw-rw---- 1 root root 254, 13 Дек 21 12:31 /dev/usbdev5.17_ep83 > > Хотя до этого были > crw-rw-rw- 1 root scanner 254, 10 Дек 21 12:29 /dev/usbdev5.17_ep00 > crw-rw-rw- 1 root scanner 254, 12 Дек 21 12:29 /dev/usbdev5.17_ep02 > crw-rw-rw- 1 root scanner 254, 11 Дек 21 12:29 /dev/usbdev5.17_ep81 > crw-rw-rw- 1 root scanner 254, 13 Дек 21 12:29 /dev/usbdev5.17_ep83 > > В чём может быть загвоздка? Куда смотреть? Я понимаю, что надо смотреть в > строну udev и его правил. Вроде в его правилах указывал права 666, но всё > едино ... :-S Да, видимо все в правилах. группа должна быть scanner, а пользователь в ней. > -- > С уважением Шенцев Алексей Владимирович. > E-mail: ashen@nsrz.ru > XMPP: ashen@altlinux.org, AlexShen@jabber.ru > ICQ: 271053845 > _______________________________________________ > community mailing list > community@lists.altlinux.org > https://lists.altlinux.org/mailman/listinfo/community -- С уважением, Владимир Черный Начальник отдела образовательных проектов ALT Linux mailto: black at altlinux.ru Jabber: black at altlinux.org ICQ: 199158712 ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Comm] SANE & Epson Perfection 1270 2007-12-21 10:38 ` Владимир Черный @ 2008-01-14 12:01 ` Алексей Шенцев 0 siblings, 0 replies; 27+ messages in thread From: Алексей Шенцев @ 2008-01-14 12:01 UTC (permalink / raw) To: ALT Linux Community general discussions В сообщении от Friday 21 December 2007 13:38:59 Владимир Черный написал(а): > Да, видимо все в правилах. группа должна быть scanner, а пользователь в > ней. И так и сяк крутил - с правилами без разницы. Единственное, в /etc/sysconfig/usb добавил строку SCANNER=yes (это на работе, дома она и так была), после чего: [root@oasu3 /]# ls -l /proc/bus/usb/005/* -rw-r--r-- 1 root root 43 Янв 14 2008 /proc/bus/usb/005/001 -rw-rw---- 1 root scanner 57 Янв 14 12:42 /proc/bus/usb/005/006 [root@oasu3 /]# Т.е. с правами на сканер стало вроде всё в порядке. Но любой вызов scanimage переводит сканер в нерабочее состояние, помогает только сброс по питанию. Это на текущем бранче, сегодня специально обновился. На ALD4 .0.1 сканер не уходит в нерабочее состояние, но система сканирования его не видит. На текущем бранче выдаётся вот такое: [root@oasu3 /]# ls -l /proc/bus/usb/005/* -rw-r--r-- 1 root root 43 Янв 14 2008 /proc/bus/usb/005/001 -rw-rw-rw- 1 root scanner 57 Янв 14 14:47 /proc/bus/usb/005/007 [root@oasu3 /]# scanimage -vpT scanimage: open of device snapscan:libusb:005:007 failed: Access to resource has been denied [root@oasu3 /]# ls -l /proc/bus/usb/005/* -rw-r--r-- 1 root root 43 Янв 14 14:49 /proc/bus/usb/005/001 -rw-rw-rw- 1 root scanner 57 Янв 14 14:47 /proc/bus/usb/005/007 [root@oasu3 /]# Интересно, кто запрещает доступ к сканеру? -- С уважением Шенцев Алексей Владимирович. E-mail: ashen@nsrz.ru XMPP: ashen@altlinux.org, AlexShen@jabber.ru ICQ: 271053845 ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Comm] SANE & Epson Perfection 1270 2007-12-21 8:52 ` Алексей Шенцев 2007-12-21 9:38 ` Алексей Шенцев @ 2007-12-21 16:08 ` Victor 2007-12-21 17:03 ` Maksim Otstavnov 2007-12-21 22:16 ` Vitaly Lipatov 1 sibling, 2 replies; 27+ messages in thread From: Victor @ 2007-12-21 16:08 UTC (permalink / raw) To: ALT Linux Community general discussions В сообщении от Friday 21 December 2007 11:52:38 Алексей Шенцев написал(а): > Угу ... Этот сканер, вместе с FineReader'ом, единственное, что держит меня > от сноса винды дома. Замена FineReader'у есть - CuneiForm сейчас FreeWare, > и у меня под wine'ом она запустилась, но не видит сканера. Осталось только > запустить сканер. А CuneiForm, которая Freeware вообще со сканером нормально работать умеет? У меня даже под Win XP выдает стабильную ошибку получения данных со сканера, при этом все остальные программы со сканером работают нормально. Перепробовал все варианты настроек. И как все-таки сделать сканер доступным из Wine? У меня ни одна WIn программа под линуксом его видеть не хочет, говорят, что не установлено ни одного twain драйвера. Пакет libwine-twain установлен. Sane работает прекрасно. Сканер Mustek Scanexpress 1200 UB Plus (опознается как Bearpaw 1200 CU). -- Виктор ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Comm] SANE & Epson Perfection 1270 2007-12-21 16:08 ` Victor @ 2007-12-21 17:03 ` Maksim Otstavnov 2007-12-21 17:14 ` Victor 2007-12-23 21:39 ` Владимир Черный 2007-12-21 22:16 ` Vitaly Lipatov 1 sibling, 2 replies; 27+ messages in thread From: Maksim Otstavnov @ 2007-12-21 17:03 UTC (permalink / raw) To: ALT Linux Community general discussions Hello Victor, Friday, December 21, 2007, 7:08:24 PM, you wrote: V> А CuneiForm, которая Freeware вообще со сканером нормально работать умеет? А сама она работает? В смысле распознавания? А то тут противоречивые сообщения проходили. -- -- Maksim ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Comm] SANE & Epson Perfection 1270 2007-12-21 17:03 ` Maksim Otstavnov @ 2007-12-21 17:14 ` Victor 2007-12-23 21:39 ` Владимир Черный 1 sibling, 0 replies; 27+ messages in thread From: Victor @ 2007-12-21 17:14 UTC (permalink / raw) To: Maksim Otstavnov, ALT Linux Community general discussions В сообщении от Friday 21 December 2007 20:03:38 Maksim Otstavnov написал(а): > V> А CuneiForm, которая Freeware вообще со сканером нормально работать > умеет? > А сама она работает? В смысле распознавания? > А то тут противоречивые сообщения проходили. Сильно не гонял, но на качественных картинках (скан журнала, например, на 300 dpi) распознает все весьма хорошо. -- Виктор ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Comm] SANE & Epson Perfection 1270 2007-12-21 17:03 ` Maksim Otstavnov 2007-12-21 17:14 ` Victor @ 2007-12-23 21:39 ` Владимир Черный 1 sibling, 0 replies; 27+ messages in thread From: Владимир Черный @ 2007-12-23 21:39 UTC (permalink / raw) To: Maksim Otstavnov, ALT Linux Community general discussions 21.12.07, Maksim Otstavnov<maksim@otstavnov.com> написал(а): > Hello Victor, > > Friday, December 21, 2007, 7:08:24 PM, you wrote: > > V> А CuneiForm, которая Freeware вообще со сканером нормально работать умеет? > > А сама она работает? В смысле распознавания? > > А то тут противоречивые сообщения проходили. Попробовал уже на паре компов. Там условие - не ниже 200dpi качество. если 300, то ошибки только на английских буквах и значках типа @. Если 150dpi ругается, а при "дотягивании" разрешения через гимп до 200 шрифт становится порядка 6 пт и практически не распознается... Кстати, когда я последний раз общался с файнридером (6-я вроде) он тоже просил 300 dpi Ну, еще из минусов - плохо передает таблицы, но это может и ошибка ОО. Пробовал распознать обратную сторону водительских прав (где таблица с категориями: 3строки слева, две справа) - в окне распознавания нормальная таблица, а при копировании в ОО таблица уже вся из 4-х строк. При этом текст абсолютно точен! > > -- > -- Maksim > > > _______________________________________________ > community mailing list > community@lists.altlinux.org > https://lists.altlinux.org/mailman/listinfo/community -- С уважением, Владимир Черный Начальник отдела образовательных проектов ALT Linux mailto: black at altlinux.ru Jabber: black at altlinux.org ICQ: 199158712 ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Comm] SANE & Epson Perfection 1270 2007-12-21 16:08 ` Victor 2007-12-21 17:03 ` Maksim Otstavnov @ 2007-12-21 22:16 ` Vitaly Lipatov 1 sibling, 0 replies; 27+ messages in thread From: Vitaly Lipatov @ 2007-12-21 22:16 UTC (permalink / raw) To: hisbreht, ALT Linux Community general discussions On 21 декабря 2007, Victor wrote: ... > И как все-таки сделать сканер доступным из Wine? Никак. > У меня ни одна WIn программа под линуксом его видеть не хочет, Проверяли на Picasa 2.2 в её Linux-версии? > говорят, что не установлено ни одного twain драйвера. Пакет > libwine-twain установлен. Sane работает прекрасно. Сканер > Mustek Scanexpress 1200 UB Plus (опознается как Bearpaw 1200 > CU). -- С уважением, Виталий Липатов Санкт-Петербург GNU! ALT Linux Team! WINE! LaTeX! LyX! http://freesource.info ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Comm] wine & twain 2007-12-20 7:46 ` Vitaly Lipatov 2007-12-20 8:20 ` [Comm] SANE & Epson Perfection 1270 Алексей Шенцев @ 2007-12-21 9:58 ` Yury Aliaev 2007-12-21 22:14 ` Vitaly Lipatov 1 sibling, 1 reply; 27+ messages in thread From: Yury Aliaev @ 2007-12-21 9:58 UTC (permalink / raw) To: ALT Linux Community general discussions Vitaly Lipatov scripsit: > Таким образом данную тему нужно начать с нормальной поддержки > этого сканера в SANE, а потом уже переходить к twain. > Виталик, поясни мне, пожалуйста, как именно работает со сканером wine через wine-twain. Просто у меня есть два предположения 1) что wine-twain обеспечивает API для работы виндовских приложений с поддерживаемым sane сканером (через sane) или 2) что он позволяет устанавливать под wine виндозные драйвера для сканера и работать через них; в этом случае sane как бы и не нужен вообще (естественно, что работать будут только приложения, запущенные под wine). Что из этого верно, а что нет? ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [Comm] wine & twain 2007-12-21 9:58 ` [Comm] wine & twain Yury Aliaev @ 2007-12-21 22:14 ` Vitaly Lipatov 0 siblings, 0 replies; 27+ messages in thread From: Vitaly Lipatov @ 2007-12-21 22:14 UTC (permalink / raw) To: ALT Linux Community general discussions On 21 декабря 2007, Yury Aliaev wrote: ... 1) что wine-twain обеспечивает API для работы > виндовских приложений с поддерживаемым sane сканером (через > sane) Да, в wine просто трансляция twain <-> sane. > или 2) что он позволяет устанавливать под wine виндозные > драйвера для сканера и работать через них; в этом случае sane нет -- С уважением, Виталий Липатов Санкт-Петербург GNU! ALT Linux Team! WINE! LaTeX! LyX! http://freesource.info ^ permalink raw reply [flat|nested] 27+ messages in thread
end of thread, other threads:[~2008-01-14 12:01 UTC | newest] Thread overview: 27+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2007-12-19 12:43 [Comm] wine & twain Алексей Шенцев 2007-12-19 12:46 ` Шишков Евгений 2007-12-19 13:23 ` Алексей Шенцев 2007-12-19 13:49 ` Шишков Евгений 2007-12-19 13:57 ` Алексей Шенцев 2007-12-19 21:22 ` Vitaly Lipatov 2007-12-20 6:17 ` Алексей Шенцев 2007-12-20 7:46 ` Vitaly Lipatov 2007-12-20 8:20 ` [Comm] SANE & Epson Perfection 1270 Алексей Шенцев 2007-12-20 8:44 ` Алексей Шенцев 2007-12-20 12:12 ` Алексей Шенцев 2007-12-20 12:46 ` Алексей Шенцев 2007-12-20 13:27 ` Владимир Черный 2007-12-20 14:16 ` Алексей Шенцев 2007-12-21 7:56 ` Алексей Шенцев 2007-12-21 8:07 ` Владимир Черный 2007-12-21 8:52 ` Алексей Шенцев 2007-12-21 9:38 ` Алексей Шенцев 2007-12-21 10:38 ` Владимир Черный 2008-01-14 12:01 ` Алексей Шенцев 2007-12-21 16:08 ` Victor 2007-12-21 17:03 ` Maksim Otstavnov 2007-12-21 17:14 ` Victor 2007-12-23 21:39 ` Владимир Черный 2007-12-21 22:16 ` Vitaly Lipatov 2007-12-21 9:58 ` [Comm] wine & twain Yury Aliaev 2007-12-21 22:14 ` Vitaly Lipatov
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git