From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Mike Shuvalov To: community@lists.altlinux.org Date: Mon, 22 Oct 2007 23:11:34 +0400 User-Agent: KMail/1.9.7 MIME-Version: 1.0 Content-Type: text/plain; charset="koi8-r" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Message-Id: <200710222311.34297.shuvalov.mv@gmail.com> Subject: [Comm] =?koi8-r?b?QUxENDogy8HLINDPxNLV1snU2CDXxcLLwc3F0tUg0yDh?= =?koi8-r?b?zNjUz80=?= X-BeenThere: community@lists.altlinux.org X-Mailman-Version: 2.1.9 Precedence: list Reply-To: shuvalov.mv@gmail.com, ALT Linux Community general discussions List-Id: ALT Linux Community general discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 22 Oct 2007 19:11:42 -0000 Archived-At: List-Archive: List-Post: =FA=C4=D2=C1=D7=D3=D4=D7=D5=CA=D4=C5! =E9=CD=C5=C5=CD: ALD4, =CF=C2=CE=CF=D7=CC=C5=CE=CE=D9=CA =C9=DA =C2=D2=C5= =CE=DE=C1 =C9 =C3=C9=C6=D2=CF=D7=CF=CA =C6=CF=D4=CF=C1=D0=D0=C1=D2=C1=D4 Fu= jiFilm FinePix=20 E550 =D3 =D2=C5=D6=C9=CD=CF=CD =D7=C5=C2=CB=C1=CD=C5=D2=D9. =EB=C1=CB =C9= =C8 =D0=CF=C4=D2=D5=D6=C9=D4=D8? =E7=D5=C7=CC=C5=CE=C9=C5 =CE=C5 =D0=CF=CD= =CF=C7=CC=CF :( =F0=CF=C4=20 =CF=C6=D4=CF=D0=C9=CB=CF=CD =D2=C1=C2=CF=D4=C1=C5=D4 =CE=C1 =D5=D2=C1. =F7=CF=D4 =D7=D9=D7=CF=C4 dmesg =D0=CF=D3=CC=C5 =D0=CF=C4=CB=CC=C0=DE=C5=CE= =C9=D1 =C1=D0=D0=C1=D2=C1=D4=C1: Linux version 2.6.18-std-smp-alt8 (builder@hint1.office.altlinux.org) (gcc= =20 version 4.1.1 20070105 (ALT Linux, build 4.1.1-alt11)) #1 SMP Mon Sep 24=20 01:41:06 MSD 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f4cb0 On node 0 totalpages: 262128 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 32752 pages, LIFO batch:7 DMI 2.4 present. ACPI: RSDP (v000 GBT ) @ 0x000f6620 ACPI: RSDT (v001 GBT GBTUACPI 0x42302e31 GBTU 0x01010101) @ 0x3fff3040 ACPI: FADT (v001 GBT GBTUACPI 0x42302e31 GBTU 0x01010101) @ 0x3fff30c0 ACPI: HPET (v001 GBT GBTUACPI 0x42302e31 GBTU 0x00000098) @ 0x3fff69c0 ACPI: MCFG (v001 GBT GBTUACPI 0x42302e31 GBTU 0x01010101) @ 0x3fff6a40 ACPI: MADT (v001 GBT GBTUACPI 0x42302e31 GBTU 0x01010101) @ 0x3fff6900 ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20040311) @ 0x3fff6ac0 ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20040311) @ 0x3fff6f50 ACPI: DSDT (v001 GBT GBTUACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) Detected 1607.746 MHz processor. Built 1 zonelists. Total pages: 262128 Kernel command line: auto BOOT_IMAGE=3DALTLinux ro=20 root=3DUUID=3D4d242a33-2c41-4790-8574-5f44ef4f6c5d panic=3D30 splash=3Dsile= nt=20 resume=3D/dev/sdb2 bootsplash: silent mode. mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1035252k/1048512k available (1585k kernel code, 12688k reserved, 64= 0k=20 data, 192k init, 131008k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3218.21 BogoMIPS=20 (lpj=3D6436434) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000=20 0000e39d 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e= 39d=20 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0000e39d=20 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code checking if image is initramfs... it is =46reeing initrd memory: 499k freed ACPI: Core revision 20060707 ACPI: Looking for DSDT in initramfs... /DSDT.aml does not exist. CPU0: Intel Genuine Intel(R) CPU 2140 @ 1.60GHz stepping 02 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3215.69 BogoMIPS=20 (lpj=3D6431396) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000=20 0000e39d 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e= 39d=20 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0000e39d=20 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Genuine Intel(R) CPU 2140 @ 1.60GHz stepping 02 Total of 2 processors activated (6433.91 BogoMIPS). ENABLING IO-APIC IRQs =2E.TIMER: vector=3D0x31 apic1=3D0 pin1=3D2 apic2=3D-1 pin2=3D-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=3D58 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH6 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,=20 disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,=20 disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,=20 disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,=20 disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=3Drouteirq". If it helps, post a r= eport pnp: 00:0a: ioport range 0x400-0x4bf could not be reserved PCI: Bridge: 0000:00:01.0 IO window: 9000-9fff MEM window: e0000000-e3ffffff PREFETCH window: d0000000-dfffffff PCI: Bridge: 0000:00:1c.0 IO window: 8000-8fff MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: a000-afff MEM window: e4000000-e5ffffff PREFETCH window: 50000000-500fffff PCI: Bridge: 0000:00:1e.0 IO window: 7000-7fff MEM window: disabled. PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1193083527.672:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] Allocate Port Service[0000:00:1c.3:pcie03] vesafb: framebuffer at 0xe1000000, mapped to 0xf8880000, using 14336k, tota= l=20 14336k vesafb: mode is 1280x1024x32, linelength=3D5120, pages=3D1 vesafb: protected mode interface info at c000:ad80 vesafb: pmi: set display start =3D c00cade3, set palette =3D c00cae3e vesafb: pmi: ports =3D 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce = 3cf=20 3d0 3d1 3d2 3d3 3d4 3d5 3da=20 vesafb: scrolling: redraw vesafb: Truecolor: size=3D8:8:8:8, shift=3D24:16:8:0 Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=3D256, MD_SB_DISKS=3D27 md: bitmap version 4.39 TCP bic registered NET: Registered protocol family 1 Using IPI No-Shortcut mode ACPI: (supports S0 S1 S4 S5) =46reeing unused kernel memory: 192k freed Executing init=3D/init Time: tsc clocksource has been installed. input: AT Translated Set 2 keyboard as /class/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D= xx ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 217 ICH7: chipset revision 1 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... input: AT Translated Set 2 keyboard as /class/input/input1 hda: Optiarc DVD RW AD-5170A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... SCSI subsystem initialized libata version 2.00 loaded. ata_piix 0000:00:1f.2: version 2.00 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xD000 ctl 0xD402 bmdma 0xE000 irq 177 ata2: SATA max UDMA/133 cmd 0xD800 ctl 0xDC02 bmdma 0xE008 irq 177 scsi0 : ata_piix ata1.00: ATA-7, max UDMA/133, 488395055 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 16 ata1.01: ATA-7, max UDMA7, 156301488 sectors: LBA48 NCQ (depth 0/32) ata1.01: ata1: dev 1 multi count 16 ata1.00: configured for UDMA/133 ata1.01: configured for UDMA/133 scsi1 : ata_piix ATA: abnormal status 0x7F on port 0xD807 Vendor: ATA Model: ST3250310AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 488395055 512-byte hdwr sectors (250058 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 488395055 512-byte hdwr sectors (250058 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sd 0:0:0:0: Attached scsi disk sda Vendor: ATA Model: SAMSUNG HD080HJ Rev: ZH10 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sdb4 < sdb5 > sd 0:0:1:0: Attached scsi disk sdb Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. input: PC Speaker as /class/input/input2 =46loppy drive(s): fd0 is 1.44M Real Time Clock Driver v1.12ac =46DC 0 is a post-1991 82077 Linux agpgart interface v0.101 (c) Dave Jones hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 177 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:1:0: Attached scsi generic sg1 type 0 usbcore: registered new driver usbfs usbcore: registered new driver hub agpgart: Detected an Intel 945G Chipset. agpgart: AGP aperture is 256M @ 0x0 parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3=20 [PCSPP,TRISTATE,COMPAT,ECP,DMA] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:03:00.0 to 64 eth0: RTL8168b/8111b at 0xf968c000, 00:1a:4d:20:d8:ae, IRQ 177 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 225, io mem 0xe6004000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 225, io base 0x0000b000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 177, io base 0x0000b400 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 217, io base 0x0000b800 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000bc00 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1b.0 to 64 usb 4-1: new low speed USB device using uhci_hcd and address 2 usb 4-1: configuration #1 chosen from 1 choice usb 5-1: new full speed USB device using uhci_hcd and address 2 usb 5-1: configuration #1 chosen from 1 choice usb 5-2: new full speed USB device using uhci_hcd and address 3 usb 5-2: configuration #1 chosen from 1 choice hub 5-2:1.0: USB hub found hub 5-2:1.0: 3 ports detected usb 5-2.1: new full speed USB device using uhci_hcd and address 4 usb 5-2.1: configuration #1 chosen from 1 choice Bluetooth: Core ver 2.10 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: HCI USB driver ver 2.9 usb 5-2.2: new full speed USB device using uhci_hcd and address 5 usb 5-2.2: configuration #1 chosen from 1 choice usb 5-2.3: new full speed USB device using uhci_hcd and address 6 usb 5-2.3: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev usbcore: registered new driver hci_usb input: Genius NetScroll + Traveler as /class/input/input3 input: USB HID v1.10 Mouse [Genius NetScroll + Traveler] on usb-0000:00:1d.= 2-1 input: Broadcom Corp BCM92045DG-Flash_UHE as /class/input/input4 input: USB HID v1.11 Keyboard [Broadcom Corp BCM92045DG-Flash_UHE] on=20 usb-0000:00:1d.3-2.2 input: Broadcom Corp BCM92045DG-Flash_UHE as /class/input/input5 input: USB HID v1.11 Mouse [Broadcom Corp BCM92045DG-Flash_UHE] on=20 usb-0000:00:1d.3-2.3 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver ts: Compaq touchscreen protocol output Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Adding 3140696k swap on /dev/sdb2. Priority:-1 extents:1 across:3140696k EXT3 FS on sdb1, internal journal device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised:=20 dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on sdb5, internal journal EXT3-fs: mounted filesystem with ordered data mode. fuse init (API version 7.7) r8169: eth0: link up r8169: eth0: link up it87: Found IT8718F chip at 0x290, revision 2 it87: in3 is VCC (+5V) intel_rng: FWH not detected nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:01:00.0 to 64 NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.11 Wed Jun 13 18:21:22= =20 PDT 2007 ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Processor [CPU0] (supports 2 throttling states) ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1I= st]=20 [20060707] ACPI: Processor [CPU1] (supports 2 throttling states) QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice Bell= ard KQEMU installed, max_locked_mem=3D518064kB. usb 3-2: new full speed USB device using uhci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice =2D-=20 Mike Shuvalov