From: "Алексей Шенцев" <ashen@nsrz.ru> To: community@lists.altlinux.org Subject: [Comm] AverTV Studio 507 Date: Mon, 20 Aug 2007 13:23:53 +0400 Message-ID: <200708201323.53967.ashen@nsrz.ru> (raw) Привет всем! Есть тюнер (см. сабж ... ;) ) Запускаю его вот с таким файлом: [root@oasu3 /]# cat /etc/modprobe.d/tv_avertvstudio507 alias char-major-81-* saa7134 alias char-major-61 lirc_gpio alias char-major-89 i2c-dev options i2c-algo-bit bit_test=1 options saa7134 card=45,45,45,45 tuner=38 i2c_scan=1,1,1,1 alsa=1,1,1,1 radio_nr=0 options tuner secam=d options saa7134-alsa index=1,2,3,4 [root@oasu3 /]# Однако, saa7134_alsa автоматом не грузится. После выполнения modprobe saa7134_alsa index=1,2,3,4 получаю такое: [root@oasu3 /]# dmesg | grep saa713 saa7130/34: v4l2 driver version 0.2.14 loaded saa7133[0]: found at 0000:02:01.0, rev: 209, irq: 209, latency: 32, mmio: 0xfa000000 saa7133[0]: subsystem: 1461:a11b, board: Avermedia AVerTV Studio 307 [card=45,insmod option] saa7133[0]: board init: gpio is 5c8 input: saa7134 IR (Avermedia AVerTV St as /class/input/input2 saa7133[0]: i2c eeprom 00: 61 14 1b a1 ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: ff f1 f7 ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c scan: found device @ 0x86 [tda9887] saa7133[0]: i2c scan: found device @ 0xa0 [eeprom] saa7133[0]: i2c scan: found device @ 0xc2 [???] tuner 1-0043: chip found @ 0x86 (saa7133[0]) tuner 1-0061: chip found @ 0xc2 (saa7133[0]) saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 saa7134 ALSA driver for DMA sound loaded saa7133[0]/alsa: saa7133[0] at 0xfa000000 irq 209 registered as card 1 [root@oasu3 /]# [root@oasu3 /]# lsmod | grep saa713 saa7134_alsa 17728 0 saa7134 117344 1 saa7134_alsa video_buf 28676 2 saa7134_alsa,saa7134 compat_ioctl32 5504 1 saa7134 ir_kbd_i2c 13072 1 saa7134 ir_common 32132 2 saa7134,ir_kbd_i2c videodev 26880 1 saa7134 v4l1_compat 16388 2 saa7134,videodev v4l2_common 26240 3 tuner,saa7134,videodev snd_pcm 81540 4 saa7134_alsa,snd_pcm_oss,snd_intel8x0,snd_ac97_codec snd 59112 13 saa7134_alsa,snd_pcm_oss,snd_intel8x0,snd_ac97_codec,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_mixer_oss,snd_pcm,snd_timer i2c_core 25216 4 tuner,saa7134,ir_kbd_i2c,i2c_i801 [root@oasu3 /]# Как сделать так, что бы saa7134_alsa грузился автоматом? Да ещё такое. Сам тюнер завожу как AverTV Studio 307 (card=45), но на: http://www.mjmwired.net/kernel/Documentation/video4linux/CARDLIST.saa7134 Сказано, что AverTV Studio 507 имеет card=102. Насколько я понял, наше ядро не знает об этом, так? -- С уважением Шенцев Алексей Владимирович. E-mail: ashen@nsrz.ru XMPP: ashen@altlinux.org, AlexShen@jabber.ru ICQ: 271053845
next reply other threads:[~2007-08-20 9:23 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2007-08-20 9:23 Алексей Шенцев [this message] 2007-08-20 9:38 ` Алексей Шенцев 2007-08-20 14:17 ` Алексей Шенцев 2007-08-21 11:51 ` Алексей Шенцев
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=200708201323.53967.ashen@nsrz.ru \ --to=ashen@nsrz.ru \ --cc=community@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git