* [Comm] wpa_supplicant+etcnet
@ 2007-06-08 17:32 Kirill
2007-06-08 19:11 ` Kirill
0 siblings, 1 reply; 2+ messages in thread
From: Kirill @ 2007-06-08 17:32 UTC (permalink / raw)
To: community
Привет community!
Бьюсь по вечерам уже дня 3 - без толку. Пож, ткните куда копать...
Есть WiFi DLink DWL-G132 (USB). Есть точка доступа, WPA2-PSK+AES.
Есть последний сизиф. Соответственно, его пакеты ndiswrapper и
wpa_supplicant.
Руками:
modprobe ndiswrapper (все находит)
wpa_supplicant -iwlan0 -Dwext -B -P/var/run/wpa_supplicant-wlan0.pid
-c /etc/net/ifaces/wlan0/wpa_supplicant.conf
(строка вычитана из etcnet, можно и короче)
dhcpcd wlan0
- все работает.
Настраиваю etcnet:wlan0:
file ifaces/wlan0/options:
TYPE=eth
MODULE=ndiswrapper
NEVER_RMMOD=yes
BOOTPROTO=dhcp
USE_HOTPLUG=no
ONBOOT=no
WPA_DRIVER=wext
и кидаю симлинку в ifaces/wlan0 на /etc/wpa_supplicant.conf.
Перегружаюсь...
ifup wlan0
iwconfig - интерфейс есть. Живой. В логах wpa_supplicant все ОК.
dhcpcd wlan0 - timeout.
Смотрю на точке доступа (она же роутер): коннект рвется каждые 20
секунд. Если убить wpa_supplicant, и запустить его вручную, то все
ок....
Может быть, кто сталкивался...
Кирилл.
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [Comm] wpa_supplicant+etcnet
2007-06-08 17:32 [Comm] wpa_supplicant+etcnet Kirill
@ 2007-06-08 19:11 ` Kirill
0 siblings, 0 replies; 2+ messages in thread
From: Kirill @ 2007-06-08 19:11 UTC (permalink / raw)
To: community
On Fri, 8 Jun 2007 21:32:40 +0400
Kirill wrote:
Отвечаю сам себе - блин, надо было раньше письмо писать...
Только сейчас обратил внимание на ругань в логах при ifup'е на то, что
USE_HOTPLUG не установлен. Попробовал сказать USE_HOTPLUG=yes... и все
стало ОК. Ну кто же знал, что для wireless USE_HOTPLUG обязателен.... И
самое главное, непонятно почему...
> Привет community!
>
> Бьюсь по вечерам уже дня 3 - без толку. Пож, ткните куда копать...
> Есть WiFi DLink DWL-G132 (USB). Есть точка доступа, WPA2-PSK+AES.
> Есть последний сизиф. Соответственно, его пакеты ndiswrapper и
> wpa_supplicant.
> Руками:
> modprobe ndiswrapper (все находит)
> wpa_supplicant -iwlan0 -Dwext -B -P/var/run/wpa_supplicant-wlan0.pid
> -c /etc/net/ifaces/wlan0/wpa_supplicant.conf
> (строка вычитана из etcnet, можно и короче)
> dhcpcd wlan0
> - все работает.
>
> Настраиваю etcnet:wlan0:
> file ifaces/wlan0/options:
> TYPE=eth
> MODULE=ndiswrapper
> NEVER_RMMOD=yes
> BOOTPROTO=dhcp
> USE_HOTPLUG=no
> ONBOOT=no
> WPA_DRIVER=wext
>
> и кидаю симлинку в ifaces/wlan0 на /etc/wpa_supplicant.conf.
> Перегружаюсь...
> ifup wlan0
> iwconfig - интерфейс есть. Живой. В логах wpa_supplicant все ОК.
> dhcpcd wlan0 - timeout.
> Смотрю на точке доступа (она же роутер): коннект рвется каждые 20
> секунд. Если убить wpa_supplicant, и запустить его вручную, то все
> ок....
> Может быть, кто сталкивался...
>
> Кирилл.
> _______________________________________________
> Community mailing list
> Community@lists.altlinux.org
> https://lists.altlinux.org/mailman/listinfo/community
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-06-08 19:11 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-06-08 17:32 [Comm] wpa_supplicant+etcnet Kirill
2007-06-08 19:11 ` Kirill
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git