From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Date: Tue, 3 Apr 2007 21:40:43 +0600 From: Igor Siolovyov To: community@lists.altlinux.org Message-Id: <20070403214043.51100a8e.gosha@anti.su> In-Reply-To: <20070327164821.GB6618@newmaster.mivlgu.local> References: <20070327221628.7fd2fe59.gosha@anti.su> <20070327164821.GB6618@newmaster.mivlgu.local> Organization: JSC "ANTi" X-Mailer: Sylpheed version 2.2.7 (GTK+ 2.10.3; i586-mandriva-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=KOI8-R Content-Transfer-Encoding: 8bit Subject: Re: [Comm] Compact install help need X-BeenThere: community@lists.altlinux.org X-Mailman-Version: 2.1.9rc1 Precedence: list Reply-To: ALT Linux Community List-Id: ALT Linux Community List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 03 Apr 2007 15:41:03 -0000 Archived-At: List-Archive: List-Post: On Tue, 27 Mar 2007 20:48:21 +0400 Sergey Vlasov wrote: > On Tue, Mar 27, 2007 at 10:16:28PM +0600, Igor Solovyov wrote: > > Машинка самая банальная: > > Сeleron-2,6 (775 сокет) > > мама GA-8I865GMKF-775 > > Google такую модель не знает - вероятно, где-то опечатка. > > > 1 гиг оперативки, > > винт - SATA (какой-то там WD на 160 гиг) - /dev/sda > > NEC DVDRW ND-3540A - ну как бы по идее должен быть /dev/hdc (второй IDE, мастер) > [...] > > dmesg упорно молчит про IDE и соответсвтенно CDROM-а нет как класса! :-( > > Тогда покажите этот вывод dmesg, а также pciscan -v. Привожу: ========================================================================= # dmesg Linux version 2.6.12-std26-up-alt7 (builder@salto.malta.altlinux.ru) (gcc version 3.4.4 20050526 (ALT Linux, build 3.4.4-alt1)) #1 Mon Dec 5 15:45:18 MSK 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003dff0000 (usable) BIOS-e820: 000000003dff0000 - 000000003dff3000 (ACPI NVS) BIOS-e820: 000000003dff3000 - 000000003e000000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 95MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f5020 On node 0 totalpages: 253936 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 24560 pages, LIFO batch:7 DMI 2.3 present. ACPI: RSDP (v000 GBT ) @ 0x000f69a0 ACPI: RSDT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3dff3040 ACPI: FADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3dff30c0 ACPI: MADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3dff6c80 ACPI: DSDT (v001 GBT AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 3e000000 (gap: 3e000000:c0c00000) Built 1 zonelists Kernel command line: auto BOOT_IMAGE=linux-up ro root=807 splash=silent bootsplash: silent mode. mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 2667.570 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1003208k/1015744k available (1496k kernel code, 11924k reserved, 738k data, 184k init, 98240k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 5275.64 BogoMIPS (lpj=2637824) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000651d 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (24) available CPU0: Thermal monitoring enabled CPU: Intel(R) Celeron(R) CPU 2.66GHz stepping 09 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: Looking for DSDT in initrd... not found! ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 457k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfafa0, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050309 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report audit: initializing netlink socket (disabled) audit(1175626173.486:0): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API vesafb: framebuffer at 0xf0000000, mapped to 0xf8880000, using 10240k, total 32576k vesafb: mode is 1280x1024x16, linelength=2560, pages=11 vesafb: protected mode interface info at 00ff:44f0 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 165339 bytes,<6>...found (1280x1024, 24181 bytes, v3). Console: switching to colour frame buffer device 160x61 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize mice: PS/2 mouse device common for all mice md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) NET: Registered protocol family 1 ACPI wakeup devices: PCI0 HUB0 USB0 USB1 USB2 USB3 USBE ACPI: (supports S0 S1 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (romfs filesystem) readonly. SCSI subsystem initialized input: AT Translated Set 2 keyboard on isa0060/serio0 libata version 1.11 loaded. ata_piix version 1.03 ata_piix: combined mode detected ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14 ata1: dev 0 cfg 49:2f00 82:706b 83:7e61 84:4023 85:7068 86:3c41 87:4023 88:207f ata1: dev 0 ATA, max UDMA/133, 321672960 sectors: lba48 ata1: dev 0 configured for UDMA/133 scsi0 : ata_piix Vendor: ATA Model: WDC WD1600YD-01N Rev: 10.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) SCSI device sda: drive cache: write back SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15 ata2: dev 0 cfg 49:0b00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:101f ata2: dev 0 ATAPI, max UDMA/66 ata2: dev 1 cfg 49:0b00 82:0210 83:1000 84:0000 85:0000 86:0000 87:0000 88:0407 ata2: dev 1 ATAPI, max UDMA/33 ata2: dev 0 configured for UDMA/33 ata2: dev 1 configured for UDMA/33 scsi1 : ata_piix ReiserFS: sda7: found reiserfs format "3.6" with standard journal ReiserFS: sda7: using ordered data mode ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda7: checking transaction log (sda7) ReiserFS: sda7: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 184k freed Executing init=/sbin/init Real Time Clock Driver v1.12 Adding 1052216k swap on /dev/sda6. Priority:-1 extents:1 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 22 (level, low) -> IRQ 22 usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8180000 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000b000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb 1-4: new high speed USB device using ehci_hcd and address 2 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI #3 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected input.c: calling hotplug without a hotplug agent defined input: PC Speaker Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 usb 1-4: device descriptor read/all, error -110 usb 1-4: new high speed USB device using ehci_hcd and address 3 Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04A9 pid 0x2660 usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] input.c: calling hotplug without a hotplug agent defined input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 865 Chipset. agpgart: Detected 32636K stolen memory. agpgart: AGP aperture is 128M @ 0xf0000000 hw_random: RNG not detected e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation ACPI: PCI Interrupt 0000:01:08.0[A] -> GSI 20 (level, low) -> IRQ 20 e100: eth0: e100_probe: addr 0xf8000000, irq 20, MAC addr 00:16:E6:60:47:FB e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex ACPI: Power Button (FF) [PWRF] ACPI: Fan [FAN] (on) ACPI: Thermal Zone [THRM] (22 C) [drm] Initialized drm 1.0.0 20040925 PCI: Unable to reserve mem region #1:8000000@f0000000 for device 0000:00:02.0 mtrr: 0xf0000000,0x8000000 overlaps existing 0xf0000000,0x1000000 [drm] Initialized i915 1.2.0 20041217 on minor 0: Intel Corporation 82865G Integrated Graphics Controller [drm] Used old pci detect: framebuffer loaded mtrr: base(0xf0020000) is not aligned on a size(0x500000) boundary mtrr: 0xf0000000,0x8000000 overlaps existing 0xf0000000,0x1000000 subfs 0.9 lp0: using parport0 (interrupt-driven). lp0: console ready bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 165339 bytes,<6>...found (1280x1024, 24181 bytes, v3). bootsplash: status on console 1 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 165339 bytes,<6>...found (1280x1024, 24181 bytes, v3). bootsplash: status on console 2 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 165339 bytes,<6>...found (1280x1024, 24181 bytes, v3). bootsplash: status on console 3 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 165339 bytes,<6>...found (1280x1024, 24181 bytes, v3). bootsplash: status on console 4 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 165339 bytes,<6>...found (1280x1024, 24181 bytes, v3). bootsplash: status on console 5 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 165339 bytes,<6>...found (1280x1024, 24181 bytes, v3). bootsplash: status on console 11 changed to on =================================================================================== # pciscan Recommended driver Description ------------------ ----------- intel-agp Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [Host bridge] intelfb Intel Corporation 82865G Integrated Graphics Controller [VGA compatible controller] uhci-hcd Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [UHCI USB Controller] uhci-hcd Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [UHCI USB Controller] uhci-hcd Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [UHCI USB Controller] uhci-hcd Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [UHCI USB Controller] ehci-hcd Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [EHCI USB Controller] hw_random Intel Corporation 82801 PCI Bridge [PCI bridge Normal decode] i8xx_tco Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [ISA bridge] ata_piix Intel Corporation 82801EB (ICH5) SATA Controller [IDE interface storage controller] i2c-i801 Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [SMBus] snd-ens1371 Ensoniq 5880 AudioPCI [Multimedia audio controller] e100 Intel Corporation 82801EB/ER (ICH5/ICH5R) integrated LAN Controller [Ethernet controller] -- Best Regards Igor Solovyov