* [Comm] SCSI-карта Mustek и ALC 2.3 (!)
@ 2007-03-11 13:09 Владимир Гусев
2007-03-11 14:42 ` Sergey Vlasov
0 siblings, 1 reply; 3+ messages in thread
From: Владимир Гусев @ 2007-03-11 13:09 UTC (permalink / raw)
To: ALT Linux Community
Здравствуйте!
Есть сканер Mustek Paragon 600 CD II. Он хорошо поддерживается Sane. Судя
по SCSI-карте, которая не видится в windows, она не требует ресурсов в
виде irq или DMA, следовательно (согласно
http://www.meier-geinitz.de/sane/mustek-backend/index_ru.html и
http://www.ixbt.com/digimage/mscanfaq1.html это AZ SCSI) должна помочь
строчка modprobe g_NCR5380 ncr_addr=0x280 ncr_53c400a=1. Однако при
выполнении этой команды комп виснет намертво. Такое же происходит при
добавлении параметров типа -ncr_irq=255. Сканер работает лишь при загрузке
этого модуля с такими параметрами: modprobe g_NCR5380 ncr_addr=0x280
dtc_3181e=1. Почему такое происходит? Как правильно загружать модуль при
старте компа? Достаточно ли прописать в /etc/modules строчку типа
g_NCR5380 ncr_addr=0x280 dtc_3181e=1? Или как-то нужно зафиксировать это в
modules.conf? Подскажите.
--
С уважением, Владимир Гусев
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Comm] SCSI-карта Mustek и ALC 2.3 (!)
2007-03-11 13:09 [Comm] SCSI-карта Mustek и ALC 2.3 (!) Владимир Гусев
@ 2007-03-11 14:42 ` Sergey Vlasov
2007-03-11 18:53 ` Владимир Гусев
0 siblings, 1 reply; 3+ messages in thread
From: Sergey Vlasov @ 2007-03-11 14:42 UTC (permalink / raw)
To: community
[-- Attachment #1: Type: text/plain, Size: 1263 bytes --]
On Sun, Mar 11, 2007 at 04:09:17PM +0300, Владимир Гусев wrote:
> Есть сканер Mustek Paragon 600 CD II. Он хорошо поддерживается Sane. Судя
> по SCSI-карте, которая не видится в windows, она не требует ресурсов в
> виде irq или DMA, следовательно (согласно
> http://www.meier-geinitz.de/sane/mustek-backend/index_ru.html и
> http://www.ixbt.com/digimage/mscanfaq1.html это AZ SCSI) должна помочь
> строчка modprobe g_NCR5380 ncr_addr=0x280 ncr_53c400a=1. Однако при
> выполнении этой команды комп виснет намертво.
ncr_53c400a=1, насколько я помню, нужно было ставить для карт от
древних сканеров HP.
> Такое же происходит при добавлении параметров типа -ncr_irq=255.
> Сканер работает лишь при загрузке этого модуля с такими
> параметрами: modprobe g_NCR5380 ncr_addr=0x280 dtc_3181e=1.
А вот для того, что клал Mustek, действительно нужно dtc_3181e=1.
> Как правильно загружать модуль при старте компа? Достаточно ли
> прописать в /etc/modules строчку типа g_NCR5380 ncr_addr=0x280
> dtc_3181e=1? Или как-то нужно зафиксировать это в modules.conf?
В /etc/modules нужно указать только имя модуля: g_NCR5380. А вот
параметры нужно указывать в /etc/modules.conf в виде:
options g_NCR5380 ncr_addr=0x280 dtc_3181e=1
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Comm] SCSI-карта Mustek и ALC 2.3 (!)
2007-03-11 14:42 ` Sergey Vlasov
@ 2007-03-11 18:53 ` Владимир Гусев
0 siblings, 0 replies; 3+ messages in thread
From: Владимир Гусев @ 2007-03-11 18:53 UTC (permalink / raw)
To: ALT Linux Community
>> Есть сканер Mustek Paragon 600 CD II. Он хорошо поддерживается Sane.
>> Судя по SCSI-карте, которая не видится в windows, она не требует
>> ресурсов в
>> виде irq или DMA, следовательно (согласно
>> http://www.meier-geinitz.de/sane/mustek-backend/index_ru.html и
>> http://www.ixbt.com/digimage/mscanfaq1.html это AZ SCSI) должна помочь
>> строчка modprobe g_NCR5380 ncr_addr=0x280 ncr_53c400a=1. Однако при
>> выполнении этой команды комп виснет намертво.
>
> ncr_53c400a=1, насколько я помню, нужно было ставить для карт от
> древних сканеров HP.
>
>> Такое же происходит при добавлении параметров типа -ncr_irq=255.
>> Сканер работает лишь при загрузке этого модуля с такими
>> параметрами: modprobe g_NCR5380 ncr_addr=0x280 dtc_3181e=1.
>
> А вот для того, что клал Mustek, действительно нужно dtc_3181e=1.
>
>> Как правильно загружать модуль при старте компа? Достаточно ли
>> прописать в /etc/modules строчку типа g_NCR5380 ncr_addr=0x280
>> dtc_3181e=1? Или как-то нужно зафиксировать это в modules.conf?
>
> В /etc/modules нужно указать только имя модуля: g_NCR5380. А вот
> параметры нужно указывать в /etc/modules.conf в виде:
>
> options g_NCR5380 ncr_addr=0x280 dtc_3181e=1
Спасибо!
--
С уважением, Владимир Гусев
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2007-03-11 18:53 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-03-11 13:09 [Comm] SCSI-карта Mustek и ALC 2.3 (!) Владимир Гусев
2007-03-11 14:42 ` Sergey Vlasov
2007-03-11 18:53 ` Владимир Гусев
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git