From: anterior <anterior@inbox.ru> To: community@lists.altlinux.org Subject: Re: [Comm] Спутниковый интернет. Ошибка - Cannot open TUN/TAP dev Raduga: No such file or directory (errno=2) Date: Fri, 1 Sep 2006 12:05:19 +0400 Message-ID: <200609011205.19763.anterior@inbox.ru> (raw) Добился очередного прогресса, но судя по всему данные принимать она так и не хочет. $cat /etc/openvpn/config/client.ovpn client dev tap proto udp remote 80.81.208.66 55460 resolv-retry infinite nobind persist-key persist-tun ca /etc/openvpn/config/ca.crt cert /etc/openvpn/config/DpRY200_1227.crt key /etc/openvpn/config/DpRY200_1227.key ns-cert-type server verb 3 comp-lzo comp-noadapt # ./b2c2 start reading channels from file '/etc/channels.conf' zapping to 1 'Raduga': sat 0, frequency = 11671 MHz V, symbolrate 12000000, vpid = 0x1fff, apid = 0x1fff sid = 0x0005 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 03 | signal d41d | snr 7f7d | ber 0000fff0 | unc 00000000 | status 1f | signal e64b | snr 9dcb | ber 0000fff0 | unc 00000000 | FE_HAS_LOCK DVB Network Interface Manager Version 1.1.0-TVF (Build Tue May 02 06:50:29 2006) Copyright (C) 2003, TV Files S.p.A Device: /dev/dvb/adapter0/net0 Status: device dvb0_0 for pid 4151 created successfully. # openvpn --config /etc/openvpn/config/client.ovpn Fri Sep 1 11:55:57 2006 OpenVPN 2.0.5 i686-suse-linux [SSL] [LZO] [EPOLL] built on Apr 23 2006 Fri Sep 1 11:55:57 2006 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Fri Sep 1 11:55:57 2006 WARNING: file '/etc/openvpn/config/DpRY200_1227.key' is group or others accessible Fri Sep 1 11:55:57 2006 LZO compression initialized Fri Sep 1 11:55:57 2006 Control Channel MTU parms [ L:1574 D:138 EF:38 EB:0 ET:0 EL:0 ] Fri Sep 1 11:55:57 2006 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ] Fri Sep 1 11:55:57 2006 Local Options hash (VER=V4): 'd79ca330' Fri Sep 1 11:55:57 2006 Expected Remote Options hash (VER=V4): 'f7df56b8' Fri Sep 1 11:55:57 2006 UDPv4 link local: [undef] Fri Sep 1 11:55:57 2006 UDPv4 link remote: 80.81.208.66:55460 Fri Sep 1 11:56:01 2006 TLS: Initial packet from 80.81.208.66:55460, sid=f88f3eb0 7352fda6 Fri Sep 1 11:56:07 2006 VERIFY OK: depth=1, /C=RU/ST=MW/L=MOSCOW/O=RadugaVPN/emailAddress=support@telecom-service.net Fri Sep 1 11:56:07 2006 VERIFY OK: nsCertType=SERVER Fri Sep 1 11:56:07 2006 VERIFY OK: depth=0, /C=RU/ST=MW/O=RadugaVPN/CN=RadugaVPN/emailAddress=support@telecom-service.net Fri Sep 1 11:56:15 2006 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Fri Sep 1 11:56:15 2006 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Fri Sep 1 11:56:15 2006 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Fri Sep 1 11:56:15 2006 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Fri Sep 1 11:56:15 2006 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Fri Sep 1 11:56:15 2006 [RadugaVPN] Peer Connection Initiated with 80.81.208.66:55460 Fri Sep 1 11:56:16 2006 SENT CONTROL [RadugaVPN]: 'PUSH_REQUEST' (status=1) Fri Sep 1 11:56:17 2006 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway,dhcp-option DNS 80.81.208.66,route-gateway 10.250.35.1,ping 30,ping-restart 120,route 0.0.0.0 0.0.0.0 10.250.35.1,dhcp-option DNS 80.81.208.34,ifconfig 10.250.35.67 255.255.255.0' Fri Sep 1 11:56:17 2006 OPTIONS IMPORT: timers and/or timeouts modified Fri Sep 1 11:56:17 2006 OPTIONS IMPORT: --ifconfig/up options modified Fri Sep 1 11:56:17 2006 OPTIONS IMPORT: route options modified Fri Sep 1 11:56:17 2006 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified Fri Sep 1 11:56:17 2006 TUN/TAP device tap0 opened Fri Sep 1 11:56:17 2006 /sbin/ifconfig tap0 10.250.35.67 netmask 255.255.255.0 mtu 1500 broadcast 10.250.35.255 Fri Sep 1 11:56:17 2006 /sbin/route add -net 80.81.208.66 netmask 255.255.255.255 gw 192.168.254.254 Fri Sep 1 11:56:17 2006 /sbin/route del -net 0.0.0.0 netmask 0.0.0.0 Fri Sep 1 11:56:17 2006 /sbin/route add -net 0.0.0.0 netmask 0.0.0.0 gw 10.250.35.1 Fri Sep 1 11:56:17 2006 /sbin/route add -net 0.0.0.0 netmask 0.0.0.0 gw 10.250.35.1 SIOCADDRT: Файл существует Fri Sep 1 11:56:17 2006 ERROR: Linux route add command failed: shell command exited with error status: 7 Fri Sep 1 11:56:17 2006 Initialization Sequence Completed Вот. В другом окне делаю: # /sbin/route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface <...долго думая...> 80.81.208.66 192.168.254.254 255.255.255.255 UGH 0 0 0 modem1 192.168.254.254 * 255.255.255.255 UH 0 0 0 modem1 10.250.35.0 * 255.255.255.0 U 0 0 0 tap0 10.0.0.0 * 255.0.0.0 U 0 0 0 dvb0_0 loopback * 255.0.0.0 U 0 0 0 lo default 10.250.35.1 0.0.0.0 UG 0 0 0 tap0 # ifconfig dvb0_0 Link encap:Ethernet HWaddr 00:D0:D7:0C:87:A8 inet addr:10.250.35.67 Bcast:10.255.255.255 Mask:255.0.0.0 inet6 addr: fe80::2d0:d7ff:fe0c:87a8/64 Scope:Link UP BROADCAST RUNNING NOARP MULTICAST MTU:4096 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Base address:0x1037 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:115 errors:0 dropped:0 overruns:0 frame:0 TX packets:115 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:7529 (7.3 Kb) TX bytes:7529 (7.3 Kb) modem1 Link encap:Point-to-Point Protocol inet addr:10.252.125.44 P-t-P:192.168.254.254 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:77 errors:0 dropped:0 overruns:0 frame:0 TX packets:159 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:7221 (7.0 Kb) TX bytes:18351 (17.9 Kb) tap0 Link encap:Ethernet HWaddr 26:9A:46:41:04:16 inet addr:10.250.35.67 Bcast:10.250.35.255 Mask:255.255.255.0 inet6 addr: fe80::249a:46ff:fe41:416/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:87 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:336 (336.0 b) TX bytes:6655 (6.4 Kb) # ping ya.ru <..долго думая..> ping: unknown host ya.ru Чего у меня не так? Непойму
next reply other threads:[~2006-09-01 8:05 UTC|newest] Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top 2006-09-01 8:05 anterior [this message] 2006-09-01 3:54 ` Nikolay A. Fetisov
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=200609011205.19763.anterior@inbox.ru \ --to=anterior@inbox.ru \ --cc=community@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git