From: "Мажурин Игорь" <mailvisor@mail.ru> To: ALT Linux Community <community@lists.altlinux.org> Subject: Re: [Comm] Спутниковый интернет. Ошибка - Cannot open TUN/TAP dev Raduga: No such file or directory (errno=2) Date: Fri, 1 Sep 2006 09:57:49 +0400 Message-ID: <200609010957.49259.mailvisor@mail.ru> (raw) In-Reply-To: <200608312342.16659.anterior@inbox.ru> В сообщении от 31 августа 2006 23:42 anterior написал(a): > Люди пожалуйста помогите настроить спут.инет через OpenVPN over GPRS. > Провайдер Радуга. Скачал с его сайта необходимые для openvpn ключи(там > всякие сертификаты вместе с конфигом). Смотрите: > $cat /etc/openvpn/config/client.ovpn > client > dev tap > dev-node Raduga > proto udp > remote 80.81.208.66 55460 > resolv-retry infinite > nobind > persist-key > persist-tun > ca /etc/openvpn/config/ca.crt > cert /etc/openvpn/config/DpRY200_1227.crt > key /etc/openvpn/config/DpRY200_1227.key > ns-cert-type server > verb 3 > comp-lzo > > Создал скрипт след.содержания:(b2c2) > DIR=/usr/ > PID=4151 > DEV_NAME=dvb0_0 > IP_ADDR=10.250.35.67 > MAC_ADDR=00:d0:d7:0c:87:a8 > cd $DIR/bin > case "$1" in > start) > $DIR/bin/szap -c /etc/channels.conf -n 1 -x > $DIR/bin/dvbnet -p $PID > /sbin/ifconfig $DEV_NAME $IP_ADDR > /sbin/ifconfig $DEV_NAME hw ether $MAC_ADDR > echo 0 > /proc/sys/net/ipv4/conf/dvb0_0/rp_filter > ;; > stop) > /sbin/ifconfig $DEV_NAME down > $DIR/bin/dvbnet -d 0 > ;; > restart) > $0 stop > $0 start > ;; > *) > echo "Usage: `basename $0` start | stop | restart" > ;; > esac > > Далее: > # ./b2c2 start > reading channels from file '/etc/channels.conf' > zapping to 1 'Raduga': > sat 0, frequency = 11671 MHz V, symbolrate 12000000, vpid = 0x1fff, apid = > 0x1fff sid = 0x0005 > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > status 03 | signal ea84 | snr 84a2 | ber 00003bc5 | unc 00000000 | > status 1f | signal f1bb | snr a41c | ber 00001ae5 | unc 00000000 | > FE_HAS_LOCK DVB Network Interface Manager > Version 1.1.0-TVF (Build Tue May 02 06:50:29 2006) > Copyright (C) 2003, TV Files S.p.A > Device: /dev/dvb/adapter0/net0 > Status: device dvb0_0 for pid 4151 created successfully. > > ---Далее соеденяюсь с GPRS Internet с помощью своего телефона по Bluetooth > используя программу KInternet, далее: > > > # openvpn --config /etc/openvpn/config/client.ovpn > Thu Aug 31 23:38:17 2006 OpenVPN 2.0.5 i686-suse-linux [SSL] [LZO] [EPOLL] > built on Apr 23 2006 > Thu Aug 31 23:38:17 2006 IMPORTANT: OpenVPN's default port number is now > 1194, based on an official port number assignment by IANA. OpenVPN > 2.0-beta16 and earlier used 5000 as the default port. > Thu Aug 31 23:38:17 2006 WARNING: file > '/etc/openvpn/config/DpRY200_1227.key' is group or others accessible > Thu Aug 31 23:38:17 2006 LZO compression initialized > Thu Aug 31 23:38:17 2006 Control Channel MTU parms [ L:1574 D:138 EF:38 > EB:0 ET:0 EL:0 ] > Thu Aug 31 23:38:17 2006 Data Channel MTU parms [ L:1574 D:1450 EF:42 > EB:135 ET:32 EL:0 AF:3/1 ] > Thu Aug 31 23:38:17 2006 Local Options hash (VER=V4): 'd79ca330' > Thu Aug 31 23:38:17 2006 Expected Remote Options hash (VER=V4): 'f7df56b8' > Thu Aug 31 23:38:17 2006 UDPv4 link local: [undef] > Thu Aug 31 23:38:17 2006 UDPv4 link remote: 80.81.208.66:55460 > Thu Aug 31 23:38:22 2006 TLS: Initial packet from 80.81.208.66:55460, > sid=f8bac167 d52c895e > Thu Aug 31 23:38:31 2006 VERIFY OK: > depth=1, > /C=RU/ST=MW/L=MOSCOW/O=RadugaVPN/emailAddress=support@telecom-service.net > Thu Aug 31 23:38:31 2006 VERIFY OK: nsCertType=SERVER > Thu Aug 31 23:38:31 2006 VERIFY OK: > depth=0, > /C=RU/ST=MW/O=RadugaVPN/CN=RadugaVPN/emailAddress=support@telecom-service.n >et Thu Aug 31 23:38:39 2006 Data Channel Encrypt: Cipher 'BF-CBC' > initialized with 128 bit key > Thu Aug 31 23:38:39 2006 Data Channel Encrypt: Using 160 bit message hash > 'SHA1' for HMAC authentication > Thu Aug 31 23:38:39 2006 Data Channel Decrypt: Cipher 'BF-CBC' initialized > with 128 bit key > Thu Aug 31 23:38:39 2006 Data Channel Decrypt: Using 160 bit message hash > 'SHA1' for HMAC authentication > Thu Aug 31 23:38:39 2006 Control Channel: TLSv1, cipher TLSv1/SSLv3 > DHE-RSA-AES256-SHA, 1024 bit RSA > Thu Aug 31 23:38:39 2006 [RadugaVPN] Peer Connection Initiated with > 80.81.208.66:55460 > Thu Aug 31 23:38:40 2006 SENT CONTROL [RadugaVPN]: 'PUSH_REQUEST' > (status=1) Thu Aug 31 23:38:45 2006 SENT CONTROL [RadugaVPN]: > 'PUSH_REQUEST' (status=1) Thu Aug 31 23:38:45 2006 PUSH: Received control > message: > 'PUSH_REPLY,redirect-gateway,dhcp-option DNS 80.81.208.66,route-gateway > 10.250.35.1,ping 30,ping-restart 120,route 0.0.0.0 0.0.0.0 > 10.250.35.1,dhcp-option DNS 80.81.208.34,ifconfig 10.250.35.67 > 255.255.255.0' Thu Aug 31 23:38:45 2006 OPTIONS IMPORT: timers and/or > timeouts modified Thu Aug 31 23:38:45 2006 OPTIONS IMPORT: --ifconfig/up > options modified Thu Aug 31 23:38:45 2006 OPTIONS IMPORT: route options > modified > Thu Aug 31 23:38:45 2006 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option > options modified > Thu Aug 31 23:38:45 2006 Note: Cannot open TUN/TAP dev Raduga: No such file > or directory (errno=2) > Thu Aug 31 23:38:45 2006 Note: Attempting fallback to kernel 2.2 TUN/TAP > interface > Thu Aug 31 23:38:45 2006 Cannot open TUN/TAP dev Raduga: No such file or > directory (errno=2) > Thu Aug 31 23:38:45 2006 Exiting > # > > Как это исправить?????????? lsmod | grep tun ? если пусто в /etc/modules.conf : добавь alias char-major-10-200 tun и еще на каком спутнике ты висишь: посмотри настройки, на свой спутник у меня Intelsat 904 и для него uplink на 80.81.208.82 (недавно изменился) > _______________________________________________ > Community mailing list > Community@lists.altlinux.org > https://lists.altlinux.org/mailman/listinfo/community
prev parent reply other threads:[~2006-09-01 5:57 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2006-08-31 19:42 anterior 2006-08-31 15:00 ` Artem Pastukhov 2006-08-31 15:08 ` Nikolay A. Fetisov 2006-09-01 5:57 ` Мажурин Игорь [this message]
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=200609010957.49259.mailvisor@mail.ru \ --to=mailvisor@mail.ru \ --cc=community@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git