From: anterior <anterior@inbox.ru> To: community@lists.altlinux.org Subject: [Comm] Спутниковый интернет. Ошибка - Cannot open TUN/TAP dev Raduga: No such file or directory (errno=2) Date: Thu, 31 Aug 2006 23:42:16 +0400 Message-ID: <200608312342.16659.anterior@inbox.ru> (raw) Люди пожалуйста помогите настроить спут.инет через OpenVPN over GPRS. Провайдер Радуга. Скачал с его сайта необходимые для openvpn ключи(там всякие сертификаты вместе с конфигом). Смотрите: $cat /etc/openvpn/config/client.ovpn client dev tap dev-node Raduga proto udp remote 80.81.208.66 55460 resolv-retry infinite nobind persist-key persist-tun ca /etc/openvpn/config/ca.crt cert /etc/openvpn/config/DpRY200_1227.crt key /etc/openvpn/config/DpRY200_1227.key ns-cert-type server verb 3 comp-lzo Создал скрипт след.содержания:(b2c2) DIR=/usr/ PID=4151 DEV_NAME=dvb0_0 IP_ADDR=10.250.35.67 MAC_ADDR=00:d0:d7:0c:87:a8 cd $DIR/bin case "$1" in start) $DIR/bin/szap -c /etc/channels.conf -n 1 -x $DIR/bin/dvbnet -p $PID /sbin/ifconfig $DEV_NAME $IP_ADDR /sbin/ifconfig $DEV_NAME hw ether $MAC_ADDR echo 0 > /proc/sys/net/ipv4/conf/dvb0_0/rp_filter ;; stop) /sbin/ifconfig $DEV_NAME down $DIR/bin/dvbnet -d 0 ;; restart) $0 stop $0 start ;; *) echo "Usage: `basename $0` start | stop | restart" ;; esac Далее: # ./b2c2 start reading channels from file '/etc/channels.conf' zapping to 1 'Raduga': sat 0, frequency = 11671 MHz V, symbolrate 12000000, vpid = 0x1fff, apid = 0x1fff sid = 0x0005 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 03 | signal ea84 | snr 84a2 | ber 00003bc5 | unc 00000000 | status 1f | signal f1bb | snr a41c | ber 00001ae5 | unc 00000000 | FE_HAS_LOCK DVB Network Interface Manager Version 1.1.0-TVF (Build Tue May 02 06:50:29 2006) Copyright (C) 2003, TV Files S.p.A Device: /dev/dvb/adapter0/net0 Status: device dvb0_0 for pid 4151 created successfully. ---Далее соеденяюсь с GPRS Internet с помощью своего телефона по Bluetooth используя программу KInternet, далее: # openvpn --config /etc/openvpn/config/client.ovpn Thu Aug 31 23:38:17 2006 OpenVPN 2.0.5 i686-suse-linux [SSL] [LZO] [EPOLL] built on Apr 23 2006 Thu Aug 31 23:38:17 2006 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Thu Aug 31 23:38:17 2006 WARNING: file '/etc/openvpn/config/DpRY200_1227.key' is group or others accessible Thu Aug 31 23:38:17 2006 LZO compression initialized Thu Aug 31 23:38:17 2006 Control Channel MTU parms [ L:1574 D:138 EF:38 EB:0 ET:0 EL:0 ] Thu Aug 31 23:38:17 2006 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ] Thu Aug 31 23:38:17 2006 Local Options hash (VER=V4): 'd79ca330' Thu Aug 31 23:38:17 2006 Expected Remote Options hash (VER=V4): 'f7df56b8' Thu Aug 31 23:38:17 2006 UDPv4 link local: [undef] Thu Aug 31 23:38:17 2006 UDPv4 link remote: 80.81.208.66:55460 Thu Aug 31 23:38:22 2006 TLS: Initial packet from 80.81.208.66:55460, sid=f8bac167 d52c895e Thu Aug 31 23:38:31 2006 VERIFY OK: depth=1, /C=RU/ST=MW/L=MOSCOW/O=RadugaVPN/emailAddress=support@telecom-service.net Thu Aug 31 23:38:31 2006 VERIFY OK: nsCertType=SERVER Thu Aug 31 23:38:31 2006 VERIFY OK: depth=0, /C=RU/ST=MW/O=RadugaVPN/CN=RadugaVPN/emailAddress=support@telecom-service.net Thu Aug 31 23:38:39 2006 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Thu Aug 31 23:38:39 2006 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Thu Aug 31 23:38:39 2006 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Thu Aug 31 23:38:39 2006 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Thu Aug 31 23:38:39 2006 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Thu Aug 31 23:38:39 2006 [RadugaVPN] Peer Connection Initiated with 80.81.208.66:55460 Thu Aug 31 23:38:40 2006 SENT CONTROL [RadugaVPN]: 'PUSH_REQUEST' (status=1) Thu Aug 31 23:38:45 2006 SENT CONTROL [RadugaVPN]: 'PUSH_REQUEST' (status=1) Thu Aug 31 23:38:45 2006 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway,dhcp-option DNS 80.81.208.66,route-gateway 10.250.35.1,ping 30,ping-restart 120,route 0.0.0.0 0.0.0.0 10.250.35.1,dhcp-option DNS 80.81.208.34,ifconfig 10.250.35.67 255.255.255.0' Thu Aug 31 23:38:45 2006 OPTIONS IMPORT: timers and/or timeouts modified Thu Aug 31 23:38:45 2006 OPTIONS IMPORT: --ifconfig/up options modified Thu Aug 31 23:38:45 2006 OPTIONS IMPORT: route options modified Thu Aug 31 23:38:45 2006 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified Thu Aug 31 23:38:45 2006 Note: Cannot open TUN/TAP dev Raduga: No such file or directory (errno=2) Thu Aug 31 23:38:45 2006 Note: Attempting fallback to kernel 2.2 TUN/TAP interface Thu Aug 31 23:38:45 2006 Cannot open TUN/TAP dev Raduga: No such file or directory (errno=2) Thu Aug 31 23:38:45 2006 Exiting # Как это исправить??????????
next reply other threads:[~2006-08-31 19:42 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2006-08-31 19:42 anterior [this message] 2006-08-31 15:00 ` Artem Pastukhov 2006-08-31 15:08 ` Nikolay A. Fetisov 2006-09-01 5:57 ` Мажурин Игорь
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=200608312342.16659.anterior@inbox.ru \ --to=anterior@inbox.ru \ --cc=community@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git