From: Dmitriy <itadmin@mail.ru> To: ALT Linux Community <community@lists.altlinux.org> Subject: [Comm] Линуксоиды помогите настроить notebook ASUS A6R + ALC 3.0 Date: Fri, 4 Aug 2006 22:39:24 +0400 Message-ID: <200608042239.25019.itadmin@mail.ru> (raw) Приветствую сообщество ! Есть ноутбук ASUS A6R + установлен ALC 3.0 DVD9 edition , на борту имеем : --------------------------------------------------------------------------------------------------------------------- ]# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Celeron(R) M processor 1.60GHz stepping : 8 cpu MHz : 200.011 cache size : 1024 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx bogomips : 3153.92 --------------------------------------------------------------------------------------------------------------------- ]# lspci 0000:00:00.0 Host bridge: ATI Technologies Inc: Unknown device 5a31 (rev 01) 0000:00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 0000:00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller 0000:00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller 0000:00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller 0000:00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11) 0000:00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI 0000:00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge 0000:00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge 0000:00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02) 0000:00:14.6 Modem: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller (rev 02) 0000:01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M] 0000:02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3) 0000:02:01.1 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17) 0000:02:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08) 0000:02:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) ------------------------------------------------------------------------------------------------------------------------------------------------- Из этого не работает: 1. POWERSAVED = cooler постоянно крутит при любой схеме управления питанием ->log-> ]# powersave -F Fan no 0: off ]# powersave -T Thermal Device no. 0: Temperature: 52 Critical: 105 Passive: 100 Active 0: 60 А также не подерживался SPEEDSTEPING пока я незагрузил модуль P4-CLOCKMOD , хотя на сколько это правельно незнаю ? 2. WI-FI = 0000:02:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) в дистре драйверов нет, но есть платные на LINUXANT и это проблема ! через NDISWRAPPER непробывал и ещё незнаю как . 3. MODEM = 0000:00:14.6 ATI Technologies Inc ATI SB400 - AC'97 Modem Controller (rev 02) тоже самое есть на LINUXANT, но есть модуль SND_ATIIXP_MODEM который загружен по дефаулту. 4. SOUND = 0000:00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02) вот здесь все логи: ]# /sbin/lsmod Module Size Used by cpufreq_powersave 1920 0 cpufreq_conservative 7076 0 cpufreq_ondemand 6172 1 cpufreq_userspace 4572 0 lp 12616 0 fglrx 256160 7 ac 4996 0 thermal 13192 0 processor 22324 1 thermal fan 4740 0 button 6800 0 battery 9604 0 ide_cd 39684 0 cdrom 37536 1 ide_cd af_packet 21640 2 yenta_socket 22152 0 rsrc_nonstatic 12800 1 yenta_socket pcmcia_core 48260 2 yenta_socket,rsrc_nonstatic 8139too 25088 0 mii 5760 1 8139too snd_atiixp_modem 15752 1 evdev 9344 1 ati_agp 8716 0 agpgart 34248 2 fglrx,ati_agp psmouse 35844 0 parport_pc 38468 1 parport 33864 2 lp,parport_pc irtty_sir 6656 0 sir_dev 16684 1 irtty_sir irda 118712 1 sir_dev crc_ccitt 2176 1 irda pcspkr 3652 0 ohci_hcd 20484 0 ehci_hcd 32904 0 usbcore 114012 3 ohci_hcd,ehci_hcd snd_atiixp 19084 1 snd_ac97_codec 88352 2 snd_atiixp_modem,snd_atiixp snd_pcm_oss 51872 0 snd_seq_dummy 3972 0 snd_seq_oss 33024 0 snd_seq_midi_event 7040 1 snd_seq_oss snd_seq 49296 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_seq_device 8716 3 snd_seq_dummy,snd_seq_oss,snd_seq snd_mixer_oss 18176 1 snd_pcm_oss snd_ac97_bus 2304 1 snd_ac97_codec snd_pcm 85128 4 snd_atiixp_modem,snd_atiixp,snd_ac97_codec,snd_pcm_oss snd_timer 23684 2 snd_seq,snd_pcm snd 54628 16 snd_atiixp_modem,snd_atiixp,snd_ac97_codec,snd_pcm_oss,snd_seq_dummy,snd_seq_oss,snd_seq_midi_event,snd_seq,snd_seq_device,snd_mixer_oss,snd_pcm,snd_timer soundcore 9184 1 snd snd_page_alloc 10632 3 snd_atiixp_modem,snd_atiixp,snd_pcm subfs 7680 1 dm_mod 55868 0 p4_clockmod 5000 0 speedstep_lib 4484 1 p4_clockmod freq_table 4612 1 p4_clockmod rtc 12344 0 reiserfs 248176 1 ide_disk 17024 3 ide_generic 1408 0 [permanent] atiixp 5904 0 [permanent] ide_core 120856 4 ide_cd,ide_disk,ide_generic,atiixp ]# lspci 0000:00:00.0 Host bridge: ATI Technologies Inc: Unknown device 5a31 (rev 01) 0000:00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 0000:00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller 0000:00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller 0000:00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller 0000:00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11) 0000:00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI 0000:00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge 0000:00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge 0000:00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02) 0000:00:14.6 Modem: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller (rev 02) 0000:01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M] 0000:02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3) 0000:02:01.1 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17) 0000:02:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08) 0000:02:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) ]# cat /proc/pci PCI devices found: Bus 0, device 0, function 0: Host bridge: PCI device 1002:5a31 (ATI Technologies Inc) (rev 1). Master Capable. Latency=64. Non-prefetchable 64 bit memory at 0x0 [0x1fffffff]. Bus 0, device 1, function 0: PCI bridge: PCI device 1002:5a3f (ATI Technologies Inc) (rev 0). Master Capable. Latency=64. Min Gnt=10. Bus 0, device 19, function 0: USB Controller: PCI device 1002:4374 (ATI Technologies Inc) (rev 0). IRQ 19. Master Capable. Latency=64. Non-prefetchable 32 bit memory at 0xfebff000 [0xfebfffff]. Bus 0, device 19, function 1: USB Controller: PCI device 1002:4375 (ATI Technologies Inc) (rev 0). IRQ 19. Master Capable. Latency=64. Non-prefetchable 32 bit memory at 0xfebfe000 [0xfebfefff]. Bus 0, device 19, function 2: USB Controller: PCI device 1002:4373 (ATI Technologies Inc) (rev 0). IRQ 19. Master Capable. Latency=64. Non-prefetchable 32 bit memory at 0xfebfd000 [0xfebfdfff]. Bus 0, device 20, function 0: SMBus: ATI Technologies Inc ATI SMBus (rev 17). I/O at 0xb00 [0xb0f]. Non-prefetchable 32 bit memory at 0x18000000 [0x180003ff]. Bus 0, device 20, function 1: IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI (rev 0). IRQ 16. I/O at 0xff00 [0xff0f]. Bus 0, device 20, function 3: ISA bridge: PCI device 1002:4377 (ATI Technologies Inc) (rev 0). Bus 0, device 20, function 4: PCI bridge: PCI device 1002:4371 (ATI Technologies Inc) (rev 0). Master Capable. Latency=64. Min Gnt=3. Bus 0, device 20, function 5: Multimedia audio controller: PCI device 1002:4370 (ATI Technologies Inc) (rev 2). IRQ 17. Master Capable. Latency=64. Min Gnt=2. Non-prefetchable 32 bit memory at 0xfebfcc00 [0xfebfccff]. Bus 0, device 20, function 6: Modem: PCI device 1002:4378 (ATI Technologies Inc) (rev 2). IRQ 17. Master Capable. Latency=64. Min Gnt=2. Non-prefetchable 32 bit memory at 0xfebfc800 [0xfebfc8ff]. Bus 1, device 5, function 0: VGA compatible controller: PCI device 1002:5a62 (ATI Technologies Inc) (rev 0). IRQ 17. Master Capable. Latency=255. Min Gnt=8. Prefetchable 32 bit memory at 0xc0000000 [0xcfffffff]. I/O at 0x9800 [0x98ff]. Non-prefetchable 32 bit memory at 0xfe1f0000 [0xfe1fffff]. Bus 2, device 0, function 0: Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 16). IRQ 20. Master Capable. Latency=64. Min Gnt=32.Max Lat=64. I/O at 0xb800 [0xb8ff]. Non-prefetchable 32 bit memory at 0xfeaffc00 [0xfeaffcff]. Bus 2, device 1, function 0: CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 179). IRQ 16. Master Capable. Latency=168. Min Gnt=128.Max Lat=5. Non-prefetchable 32 bit memory at 0x18001000 [0x18001fff]. Bus 2, device 1, function 1: Class 0805: PCI device 1180:0822 (Ricoh Co Ltd) (rev 23). IRQ 5. Master Capable. Latency=64. Non-prefetchable 32 bit memory at 0xfeaff800 [0xfeaff8ff]. Bus 2, device 1, function 2: System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 8). IRQ 5. Non-prefetchable 32 bit memory at 0xfeaff400 [0xfeaff4ff]. Bus 2, device 3, function 0: Network controller: PCI device 14e4:4318 (Broadcom Corporation) (rev 2). IRQ 5. Master Capable. Latency=64. Non-prefetchable 32 bit memory at 0xfeafc000 [0xfeafdfff]. ]# dmesg Linux version 2.6.12-std26-up-alt10 (builder@salto.malta.altlinux.ru) (gcc version 3.4.4 20050526 (ALT Linux, build 3.4.4-alt1)) #1 Tue Feb 28 17:29:17 MSK 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000017fd0000 (usable) BIOS-e820: 0000000017fd0000 - 0000000017fde000 (ACPI data) BIOS-e820: 0000000017fde000 - 0000000018000000 (ACPI NVS) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 383MB LOWMEM available. On node 0 totalpages: 98256 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 94160 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 ACPIAM ) @ 0x000f85d0 ACPI: RSDT (v001 A M I OEMRSDT 0x10000519 MSFT 0x00000097) @ 0x17fd0000 ACPI: FADT (v002 A M I OEMFACP 0x10000519 MSFT 0x00000097) @ 0x17fd0200 ACPI: MADT (v001 A M I OEMAPIC 0x10000519 MSFT 0x00000097) @ 0x17fd0390 ACPI: MCFG (v001 A M I OEMMCFG 0x10000519 MSFT 0x00000097) @ 0x17fd03f0 ACPI: BOOT (v001 A M I OEMBOOT 0x10000519 MSFT 0x00000097) @ 0x17fd0430 ACPI: OEMB (v001 A M I AMI_OEM 0x10000519 MSFT 0x00000097) @ 0x17fde040 ACPI: SSDT (v001 AMI CPU_CST 0x00000001 INTL 0x02002026) @ 0x17fd6d20 ACPI: DSDT (v001 AMJG_ AMJG_B32 0x00000b32 INTL 0x02002026) @ 0x00000000 ATI board detected. Disabling timer routing over 8254. ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:13 APIC version 20 ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 18000000 (gap: 18000000:e6e00000) Built 1 zonelists Kernel command line: auto BOOT_IMAGE=linux-up ro root=301 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 1600.095 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 385928k/393024k available (1497k kernel code, 6536k reserved, 741k data, 184k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 3153.92 BogoMIPS (lpj=1576960) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Celeron(R) M processor 1.60GHz stepping 08 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: Looking for DSDT in initrd... not found! ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... failed. ...trying to set up timer as Virtual Wire IRQ... works. checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 358k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3 PCI: Using MMCONFIG mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050309 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 Boot video device is 0000:01:05.0 PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: Embedded Controller [EC0] (gpe 24) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: Power Resource [GFAN] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 3 of device 0000:00:00.0 pnp: 00:07: ioport range 0xa00-0xa0f has been reserved Simple Boot Flag at 0xff set to 0x1 audit: initializing netlink socket (disabled) audit(1154701249.092:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API vesafb: framebuffer at 0xc0000000, mapped to 0xd8880000, using 6144k, total 131072k vesafb: mode is 1024x768x16, linelength=2048, pages=84 vesafb: protected mode interface info at c000:5214 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 104737 bytes,<6>...found (1024x768, 15803 bytes, v3). Console: switching to colour frame buffer device 128x45 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize mice: PS/2 mouse device common for all mice md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) NET: Registered protocol family 1 ACPI wakeup devices: PCE2 PS2K P0P9 LAN0 CBS0 CRD0 CRD1 AC97 MC97 USB1 USB2 EUSB SLPB ACPI: (supports S0 S1 S3 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (romfs filesystem) readonly. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ATIIXP: IDE controller at PCI slot 0000:00:14.1 ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 ATIIXP: chipset revision 0 ATIIXP: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... input: AT Translated Set 2 keyboard on isa0060/serio0 hda: HTS541080G9AT00, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: TSSTcorpCD/DVDW TS-L532U, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 156301488 sectors (80026 MB) w/7539KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 ReiserFS: hda1: found reiserfs format "3.6" with standard journal ReiserFS: hda1: using ordered data mode ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda1: checking transaction log (hda1) ReiserFS: hda1: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 184k freed Executing init=/sbin/init Real Time Clock Driver v1.12 Adding 329324k swap on /dev/hda2. Priority:-1 extents:1 p4-clockmod: Warning: Pentium M detected. The speedstep_centrino module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible. p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com subfs 0.9 ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17 usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: PCI device 1002:4373 (ATI Technologies Inc) ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.2: irq 19, io mem 0xfebfd000 ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:00:13.0: PCI device 1002:4374 (ATI Technologies Inc) ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 19, io mem 0xfebff000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:00:13.1: PCI device 1002:4375 (ATI Technologies Inc) ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 19, io mem 0xfebfe000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected input.c: calling hotplug without a hotplug agent defined input: PC Speaker NET: Registered protocol family 23 parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] Linux agpgart interface v0.101 (c) Dave Jones Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008 input.c: calling hotplug without a hotplug agent defined input: SynPS/2 Synaptics TouchPad on isa0060/serio4 ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17 ALSA /usr/src/RPM/BUILD/kernel-source-alsa-1.0.10/pci/ac97/ac97_codec.c:2033: MC'97 1 converters and GPIO not ready (0xff00) 8139too Fast Ethernet driver 0.9.27 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 20 (level, low) -> IRQ 20 eth0: RealTek RTL8139 at 0xd913ec00, 00:15:f2:b5:c3:e1, IRQ 20 eth0: Identified 8139 chip type 'RTL-8100B/8139D' eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 Linux Kernel Card Services options: [pci] [cardbus] [pm] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 16 Yenta: CardBus bridge found at 0000:02:01.0 [1043:1187] Yenta: ISA IRQ mask 0x0638, PCI irq 16 Socket status: 30000006 NET: Registered protocol family 17 hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Fan [FN00] (off) ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Thermal Zone [THRM] (56 C) ACPI: AC Adapter [AC0] (on-line) fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [fglrx] Maximum main memory to use for locked dma buffers: 315 MBytes. ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17 [fglrx] module loaded - fglrx 8.18.6 [Oct 11 2005] on minor 0 [fglrx] free PCIe = 54804480 [fglrx] max PCIe = 54804480 [fglrx] free LFB = 119828480 [fglrx] max LFB = 119828480 [fglrx] free Inv = 0 [fglrx] max Inv = 0 [fglrx] total Inv = 0 [fglrx] total TIM = 0 [fglrx] total FB = 0 [fglrx] total PCIe = 16384 lp0: using parport0 (interrupt-driven). lp0: console ready kernel: Linux version 2.6.12-std26-up-alt10 (builder@salto.malta.altlinux.ru) (gcc version 3.4.4 20050526 (ALT Linux, build 3.4.4-alt1)) #1 Tue Feb 28 17:29:17 MSK 2006 Aug 4 14:47:19 machine1600 kernel: BIOS-provided physical RAM map: Aug 4 14:47:19 machine1600 kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Aug 4 14:47:19 machine1600 kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Aug 4 14:47:19 machine1600 kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Aug 4 14:47:19 machine1600 kernel: BIOS-e820: 0000000000100000 - 0000000017fd0000 (usable) Aug 4 14:47:19 machine1600 kernel: BIOS-e820: 0000000017fd0000 - 0000000017fde000 (ACPI data) Aug 4 14:47:19 machine1600 kernel: BIOS-e820: 0000000017fde000 - 0000000018000000 (ACPI NVS) Aug 4 14:47:19 machine1600 kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Aug 4 14:47:19 machine1600 kernel: BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) Aug 4 14:47:19 machine1600 kernel: 0MB HIGHMEM available. Aug 4 14:47:19 machine1600 kernel: 383MB LOWMEM available. Aug 4 14:47:19 machine1600 kernel: DMI 2.3 present. Aug 4 14:47:19 machine1600 kernel: ATI board detected. Disabling timer routing over 8254. Aug 4 14:47:19 machine1600 kernel: ACPI: PM-Timer IO Port: 0x808 Aug 4 14:47:19 machine1600 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Aug 4 14:47:19 machine1600 kernel: Processor #0 6:13 APIC version 20 Aug 4 14:47:19 machine1600 kernel: ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) Aug 4 14:47:19 machine1600 kernel: IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23 Aug 4 14:47:19 machine1600 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Aug 4 14:47:19 machine1600 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) Aug 4 14:47:19 machine1600 kernel: Enabling APIC mode: Flat. Using 1 I/O APICs Aug 4 14:47:19 machine1600 kernel: Using ACPI (MADT) for SMP configuration information Aug 4 14:47:19 machine1600 kernel: Allocating PCI resources starting at 18000000 (gap: 18000000:e6e00000) Aug 4 14:47:19 machine1600 kernel: Built 1 zonelists Aug 4 14:47:19 machine1600 kernel: Kernel command line: auto BOOT_IMAGE=linux-up ro root=301 Aug 4 14:47:19 machine1600 kernel: Initializing CPU#0 Aug 4 14:47:19 machine1600 kernel: PID hash table entries: 2048 (order: 11, 32768 bytes) Aug 4 14:47:19 machine1600 kernel: Detected 1601.292 MHz processor. Aug 4 14:47:19 machine1600 kernel: Using pmtmr for high-res timesource Aug 4 14:47:19 machine1600 kernel: Console: colour dummy device 80x25 Aug 4 14:47:19 machine1600 kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Aug 4 14:47:19 machine1600 kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Aug 4 14:47:19 machine1600 kernel: Memory: 385928k/393024k available (1497k kernel code, 6536k reserved, 741k data, 184k init, 0k highmem) Aug 4 14:47:19 machine1600 kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok. Aug 4 14:47:19 machine1600 kernel: Security Framework v1.0.0 initialized Aug 4 14:47:19 machine1600 kernel: Capability LSM initialized Aug 4 14:47:19 machine1600 kernel: Mount-cache hash table entries: 512 Aug 4 14:47:19 machine1600 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K Aug 4 14:47:19 machine1600 kernel: CPU: L2 cache: 1024K Aug 4 14:47:19 machine1600 kernel: Intel machine check architecture supported. Aug 4 14:47:19 machine1600 kernel: Intel machine check reporting enabled on CPU#0. Aug 4 14:47:19 machine1600 kernel: CPU: Intel(R) Celeron(R) M processor 1.60GHz stepping 08 Aug 4 14:47:19 machine1600 kernel: Enabling fast FPU save and restore... done. Aug 4 14:47:19 machine1600 kernel: Enabling unmasked SIMD FPU exception support... done. Aug 4 14:47:19 machine1600 kernel: Checking 'hlt' instruction... OK. Aug 4 14:47:19 machine1600 kernel: ACPI: Looking for DSDT in initrd... not found! Aug 4 14:47:19 machine1600 kernel: ENABLING IO-APIC IRQs Aug 4 14:47:19 machine1600 kernel: ..TIMER: vector=0x31 pin1=2 pin2=-1 Aug 4 14:47:19 machine1600 kernel: ..MP-BIOS bug: 8254 timer not connected to IO-APIC Aug 4 14:47:19 machine1600 kernel: ...trying to set up timer (IRQ0) through the 8259A ... failed. Aug 4 14:47:19 machine1600 kernel: ...trying to set up timer as Virtual Wire IRQ... works. Aug 4 14:47:19 machine1600 kernel: checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Aug 4 14:47:19 machine1600 kernel: Freeing initrd memory: 358k freed Aug 4 14:47:19 machine1600 kernel: NET: Registered protocol family 16 Aug 4 14:47:19 machine1600 kernel: PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3 Aug 4 14:47:19 machine1600 kernel: PCI: Using MMCONFIG Aug 4 14:47:19 machine1600 kernel: mtrr: v2.0 (20020519) Aug 4 14:47:19 machine1600 kernel: ACPI: Subsystem revision 20050309 Aug 4 14:47:19 machine1600 kernel: ACPI: Interpreter enabled Aug 4 14:47:19 machine1600 kernel: ACPI: Using IOAPIC for interrupt routing Aug 4 14:47:19 machine1600 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00) Aug 4 14:47:19 machine1600 kernel: PCI: Probing PCI hardware (bus 00) Aug 4 14:47:19 machine1600 kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 Aug 4 14:47:19 machine1600 kernel: PCI: Transparent bridge - 0000:00:14.4 Aug 4 14:47:19 machine1600 kernel: ACPI: Embedded Controller [EC0] (gpe 24) Aug 4 14:47:19 machine1600 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. Aug 4 14:47:19 machine1600 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. Aug 4 14:47:19 machine1600 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. Aug 4 14:47:19 machine1600 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. Aug 4 14:47:19 machine1600 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. Aug 4 14:47:19 machine1600 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled. Aug 4 14:47:19 machine1600 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. Aug 4 14:47:19 machine1600 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. Aug 4 14:47:19 machine1600 kernel: ACPI: Power Resource [GFAN] (off) Aug 4 14:47:19 machine1600 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay Aug 4 14:47:19 machine1600 kernel: pnp: PnP ACPI init Aug 4 14:47:19 machine1600 kernel: pnp: PnP ACPI: found 14 devices Aug 4 14:47:19 machine1600 kernel: PnPBIOS: Disabled by ACPI PNP Aug 4 14:47:19 machine1600 kernel: PCI: Using ACPI for IRQ routing Aug 4 14:47:19 machine1600 kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Aug 4 14:47:19 machine1600 kernel: PCI: Cannot allocate resource region 3 of device 0000:00:00.0 Aug 4 14:47:19 machine1600 kernel: pnp: 00:07: ioport range 0xa00-0xa0f has been reserved Aug 4 14:47:19 machine1600 kernel: Simple Boot Flag at 0xff set to 0x1 Aug 4 14:47:19 machine1600 kernel: audit: initializing netlink socket (disabled) Aug 4 14:47:19 machine1600 kernel: audit(1154688418.983:0): initialized Aug 4 14:47:19 machine1600 kernel: Total HugeTLB memory allocated, 0 Aug 4 14:47:19 machine1600 kernel: VFS: Disk quotas dquot_6.5.1 Aug 4 14:47:19 machine1600 kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Aug 4 14:47:19 machine1600 kernel: Initializing Cryptographic API Aug 4 14:47:19 machine1600 kernel: vesafb: framebuffer at 0xc0000000, mapped to 0xd8880000, using 6144k, total 131072k Aug 4 14:47:19 machine1600 kernel: vesafb: mode is 1024x768x16, linelength=2048, pages=84 Aug 4 14:47:19 machine1600 kernel: vesafb: protected mode interface info at c000:5214 Aug 4 14:47:19 machine1600 kernel: vesafb: scrolling: redraw Aug 4 14:47:19 machine1600 kernel: vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Aug 4 14:47:19 machine1600 kernel: bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 104737 bytes,<6>...found (1024x768, 15803 bytes, v3). Aug 4 14:47:19 machine1600 kernel: Console: switching to colour frame buffer device 128x45 Aug 4 14:47:19 machine1600 kernel: fb0: VESA VGA frame buffer device Aug 4 14:47:19 machine1600 kernel: isapnp: Scanning for PnP cards... Aug 4 14:47:19 machine1600 kernel: isapnp: No Plug & Play device found Aug 4 14:47:19 machine1600 kernel: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 Aug 4 14:47:19 machine1600 kernel: i8042.c: Detected active multiplexing controller, rev 1.1. Aug 4 14:47:19 machine1600 kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12 Aug 4 14:47:19 machine1600 kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12 Aug 4 14:47:19 machine1600 kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12 Aug 4 14:47:19 machine1600 kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12 Aug 4 14:47:19 machine1600 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Aug 4 14:47:19 machine1600 kernel: io scheduler noop registered Aug 4 14:47:19 machine1600 kernel: io scheduler anticipatory registered Aug 4 14:47:19 machine1600 kernel: io scheduler deadline registered Aug 4 14:47:19 machine1600 kernel: io scheduler cfq registered Aug 4 14:47:19 machine1600 kernel: RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize Aug 4 14:47:19 machine1600 kernel: mice: PS/2 mouse device common for all mice Aug 4 14:47:19 machine1600 kernel: md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 Aug 4 14:47:19 machine1600 kernel: NET: Registered protocol family 2 Aug 4 14:47:19 machine1600 kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes Aug 4 14:47:19 machine1600 kernel: TCP established hash table entries: 16384 (order: 5, 131072 bytes) Aug 4 14:47:19 machine1600 kernel: TCP bind hash table entries: 16384 (order: 4, 65536 bytes) Aug 4 14:47:19 machine1600 kernel: TCP: Hash tables configured (established 16384 bind 16384) Aug 4 14:47:19 machine1600 kernel: NET: Registered protocol family 1 Aug 4 14:47:19 machine1600 kernel: ACPI wakeup devices: Aug 4 14:47:19 machine1600 kernel: PCE2 PS2K P0P9 LAN0 CBS0 CRD0 CRD1 AC97 MC97 USB1 USB2 EUSB SLPB Aug 4 14:47:19 machine1600 kernel: ACPI: (supports S0 S1 S3 S4 S5) Aug 4 14:47:19 machine1600 kernel: md: Autodetecting RAID arrays. Aug 4 14:47:19 machine1600 kernel: md: autorun ... Aug 4 14:47:19 machine1600 kernel: md: ... autorun DONE. Aug 4 14:47:19 machine1600 kernel: RAMDISK: Compressed image found at block 0 Aug 4 14:47:19 machine1600 kernel: VFS: Mounted root (romfs filesystem) readonly. Aug 4 14:47:19 machine1600 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Aug 4 14:47:19 machine1600 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Aug 4 14:47:19 machine1600 kernel: ATIIXP: IDE controller at PCI slot 0000:00:14.1 Aug 4 14:47:19 machine1600 kernel: ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 Aug 4 14:47:19 machine1600 kernel: ATIIXP: chipset revision 0 Aug 4 14:47:19 machine1600 kernel: ATIIXP: not 100%% native mode: will probe irqs later Aug 4 14:47:19 machine1600 kernel: ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio Aug 4 14:47:19 machine1600 kernel: ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio Aug 4 14:47:19 machine1600 kernel: input: AT Translated Set 2 keyboard on isa0060/serio0 Aug 4 14:47:19 machine1600 kernel: hda: HTS541080G9AT00, ATA DISK drive Aug 4 14:47:19 machine1600 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Aug 4 14:47:19 machine1600 kernel: hdc: TSSTcorpCD/DVDW TS-L532U, ATAPI CD/DVD-ROM drive Aug 4 14:47:19 machine1600 kernel: ide1 at 0x170-0x177,0x376 on irq 15 Aug 4 14:47:19 machine1600 kernel: hda: max request size: 1024KiB Aug 4 14:47:19 machine1600 kernel: hda: 156301488 sectors (80026 MB) w/7539KiB Cache, CHS=16383/255/63, UDMA(100) Aug 4 14:47:19 machine1600 kernel: hda: cache flushes supported Aug 4 14:47:19 machine1600 kernel: hda: hda1 hda2 Aug 4 14:47:19 machine1600 kernel: ReiserFS: hda1: found reiserfs format "3.6" with standard journal Aug 4 14:47:19 machine1600 kernel: ReiserFS: hda1: using ordered data mode Aug 4 14:47:19 machine1600 kernel: ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 Aug 4 14:47:19 machine1600 kernel: ReiserFS: hda1: checking transaction log (hda1) Aug 4 14:47:19 machine1600 kernel: ReiserFS: hda1: Using r5 hash to sort names Aug 4 14:47:19 machine1600 kernel: VFS: Mounted root (reiserfs filesystem) readonly. Aug 4 14:47:19 machine1600 kernel: Trying to move old root to /initrd ... failed Aug 4 14:47:19 machine1600 kernel: Unmounting old root Aug 4 14:47:19 machine1600 kernel: Trying to free ramdisk memory ... okay Aug 4 14:47:19 machine1600 kernel: Freeing unused kernel memory: 184k freed Aug 4 14:47:19 machine1600 kernel: Executing init=/sbin/init Aug 4 14:47:19 machine1600 kernel: Real Time Clock Driver v1.12 Aug 4 14:47:19 machine1600 kernel: Adding 329324k swap on /dev/hda2. Priority:-1 extents:1 Aug 4 14:47:19 machine1600 kernel: p4-clockmod: Warning: Pentium M detected. The speedstep_centrino module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible. Aug 4 14:47:19 machine1600 kernel: p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available Aug 4 14:47:19 machine1600 kernel: device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com Aug 4 14:47:19 machine1600 kernel: subfs 0.9 Aug 4 14:47:20 machine1600 hotplug: Hotplug (cpu.rc) start: succeeded Aug 4 14:47:20 machine1600 hal.hotplug[2634]: DEVPATH is not set (subsystem pci) Aug 4 14:47:18 machine1600 udevd: udevd startup succeeded Aug 4 14:47:18 machine1600 rc: Starting pcmcia: succeeded Aug 4 14:47:18 machine1600 network: Computing interface groups: Aug 4 14:47:18 machine1600 network: . Aug 4 14:47:18 machine1600 network: . Aug 4 14:47:18 machine1600 network: 2 interfaces found Aug 4 14:47:18 machine1600 network: Starting group 0/virtual (1 interfaces) Aug 4 14:47:18 machine1600 network: ^IStarting lo: Aug 4 14:47:18 machine1600 network: . Aug 4 14:47:18 machine1600 last message repeated 3 times Aug 4 14:47:18 machine1600 network: OK Aug 4 14:47:18 machine1600 network: Starting group 1/realphys (1 interfaces) Aug 4 14:47:18 machine1600 network: ^IStarting eth0: Aug 4 14:47:18 machine1600 network: skipping hotplug iface 'eth0' Aug 4 14:47:18 machine1600 network: SKIPPED Aug 4 14:47:18 machine1600 network: Processing /etc/net/vlantab: Aug 4 14:47:18 machine1600 network: 0 lines processed. Aug 4 14:47:18 machine1600 rc: Starting network: succeeded Aug 4 14:47:18 machine1600 portmap: portmap startup succeeded Aug 4 14:47:18 machine1600 dd: 1+0 records in Aug 4 14:47:18 machine1600 dd: 1+0 records out Aug 4 14:47:18 machine1600 dd: 512 bytes (512 B) copied, 0.000399 seconds, 1.3 MB/s Aug 4 14:47:18 machine1600 random: Initializing random number generator: succeeded Aug 4 14:47:21 machine1600 kernel: ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17 Aug 4 14:47:22 machine1600 hotplug: Hotplug (sound.rc) start: succeeded Aug 4 14:47:22 machine1600 sound.dev[2965]: Restore mixer values for /class/sound/controlC0 (0) Aug 4 14:47:22 machine1600 kernel: usbcore: registered new driver usbfs Aug 4 14:47:22 machine1600 kernel: usbcore: registered new driver hub Aug 4 14:47:22 machine1600 kernel: ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 Aug 4 14:47:22 machine1600 kernel: ehci_hcd 0000:00:13.2: PCI device 1002:4373 (ATI Technologies Inc) Aug 4 14:47:22 machine1600 kernel: ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 Aug 4 14:47:22 machine1600 kernel: ehci_hcd 0000:00:13.2: irq 19, io mem 0xfebfd000 Aug 4 14:47:22 machine1600 kernel: ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 Aug 4 14:47:22 machine1600 kernel: hub 1-0:1.0: USB hub found Aug 4 14:47:22 machine1600 kernel: hub 1-0:1.0: 8 ports detected Aug 4 14:47:22 machine1600 kernel: ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 Aug 4 14:47:22 machine1600 kernel: ohci_hcd 0000:00:13.0: PCI device 1002:4374 (ATI Technologies Inc) Aug 4 14:47:22 machine1600 kernel: ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 Aug 4 14:47:22 machine1600 kernel: ohci_hcd 0000:00:13.0: irq 19, io mem 0xfebff000 Aug 4 14:47:22 machine1600 kernel: hub 2-0:1.0: USB hub found Aug 4 14:47:22 machine1600 kernel: hub 2-0:1.0: 4 ports detected Aug 4 14:47:22 machine1600 kernel: ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 Aug 4 14:47:22 machine1600 kernel: ohci_hcd 0000:00:13.1: PCI device 1002:4375 (ATI Technologies Inc) Aug 4 14:47:22 machine1600 kernel: ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 Aug 4 14:47:22 machine1600 kernel: ohci_hcd 0000:00:13.1: irq 19, io mem 0xfebfe000 Aug 4 14:47:22 machine1600 kernel: hub 3-0:1.0: USB hub found Aug 4 14:47:22 machine1600 kernel: hub 3-0:1.0: 4 ports detected Aug 4 14:47:22 machine1600 hotplug: Hotplug (usb.rc) start: succeeded Aug 4 14:47:24 machine1600 kernel: input.c: calling hotplug without a hotplug agent defined Aug 4 14:47:24 machine1600 kernel: input: PC Speaker Aug 4 14:47:25 machine1600 kernel: NET: Registered protocol family 23 Aug 4 14:47:25 machine1600 kernel: parport: PnPBIOS parport detected. Aug 4 14:47:25 machine1600 kernel: parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] Aug 4 14:47:25 machine1600 pnp.rc[3155]: missing kernel or user mode driver atkbd Aug 4 14:47:25 machine1600 hotplug: Hotplug (pnp.rc) start: succeeded Aug 4 14:47:26 machine1600 hal.hotplug[3803]: DEVPATH is not set (subsystem pci) Aug 4 14:47:26 machine1600 kernel: Linux agpgart interface v0.101 (c) Dave Jones Aug 4 14:47:26 machine1600 hal.hotplug[3852]: DEVPATH is not set (subsystem pci) Aug 4 14:47:26 machine1600 hal.hotplug[3901]: DEVPATH is not set (subsystem pci) Aug 4 14:47:26 machine1600 hal.hotplug[3933]: DEVPATH is not set (subsystem pci) Aug 4 14:47:26 machine1600 kernel: Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008 Aug 4 14:47:26 machine1600 kernel: input.c: calling hotplug without a hotplug agent defined Aug 4 14:47:26 machine1600 kernel: input: SynPS/2 Synaptics TouchPad on isa0060/serio4 Aug 4 14:47:26 machine1600 hal.hotplug[3972]: DEVPATH is not set (subsystem pci) Aug 4 14:47:26 machine1600 hal.hotplug[4014]: DEVPATH is not set (subsystem pci) Aug 4 14:47:26 machine1600 hal.hotplug[4079]: DEVPATH is not set (subsystem pci) Aug 4 14:47:26 machine1600 hal.hotplug[4166]: DEVPATH is not set (subsystem pci) Aug 4 14:47:27 machine1600 hal.hotplug[4193]: DEVPATH is not set (subsystem pci) Aug 4 14:47:27 machine1600 hal.hotplug[4220]: DEVPATH is not set (subsystem pci) Aug 4 14:47:27 machine1600 hal.hotplug[4252]: DEVPATH is not set (subsystem pci) Aug 4 14:47:27 machine1600 kernel: ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17 Aug 4 14:47:27 machine1600 kernel: ALSA /usr/src/RPM/BUILD/kernel-source-alsa-1.0.10/pci/ac97/ac97_codec.c:2033: MC'97 1 converters and GPIO not ready (0xff00) Aug 4 14:47:27 machine1600 hal.hotplug[4312]: DEVPATH is not set (subsystem pci) Aug 4 14:47:27 machine1600 sound.dev[4378]: Restore mixer values for /class/sound/controlC1 (1) Aug 4 14:47:27 machine1600 hal.hotplug[4411]: DEVPATH is not set (subsystem pci) Aug 4 14:47:27 machine1600 kernel: 8139too Fast Ethernet driver 0.9.27 Aug 4 14:47:27 machine1600 kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 20 (level, low) -> IRQ 20 Aug 4 14:47:27 machine1600 kernel: eth0: RealTek RTL8139 at 0xd913ec00, 00:15:f2:b5:c3:e1, IRQ 20 Aug 4 14:47:27 machine1600 hal.hotplug[4475]: DEVPATH is not set (subsystem pci) Aug 4 14:47:28 machine1600 ifplugd(eth0)[4530]: ifplugd 0.28 initializing. Aug 4 14:47:28 machine1600 kernel: eth0: link down Aug 4 14:47:28 machine1600 ifplugd(eth0)[4530]: Using interface eth0/00:15:F2:B5:C3:E1 with driver <8139too> (version: 0.9.27) Aug 4 14:47:28 machine1600 ifplugd(eth0)[4530]: Using detection mode: SIOCETHTOOL Aug 4 14:47:28 machine1600 ifplugd(eth0)[4530]: Initialization complete, link beat not detected. Aug 4 14:47:28 machine1600 kernel: Linux Kernel Card Services Aug 4 14:47:28 machine1600 kernel: options: [pci] [cardbus] [pm] Aug 4 14:47:28 machine1600 kernel: ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 16 Aug 4 14:47:28 machine1600 kernel: Yenta: CardBus bridge found at 0000:02:01.0 [1043:1187] Aug 4 14:47:28 machine1600 kernel: Yenta: ISA IRQ mask 0x0638, PCI irq 16 Aug 4 14:47:28 machine1600 kernel: Socket status: 30000006 Aug 4 14:47:28 machine1600 hal.hotplug[4585]: DEVPATH is not set (subsystem pci) Aug 4 14:47:28 machine1600 hal.hotplug[4620]: DEVPATH is not set (subsystem pci) Aug 4 14:47:28 machine1600 hal.hotplug[4647]: DEVPATH is not set (subsystem pci) Aug 4 14:47:28 machine1600 hotplug: Hotplug (pci.rc) start: succeeded Aug 4 14:47:28 machine1600 hotplug: Hotplug (misc.rc) start: succeeded Aug 4 14:47:28 machine1600 kernel: hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Aug 4 14:47:28 machine1600 kernel: Uniform CD-ROM driver Revision: 3.20 Aug 4 14:47:28 machine1600 hotplug: Hotplug (block.rc) start: succeeded Aug 4 14:47:29 machine1600 kernel: ACPI: Battery Slot [BAT0] (battery present) Aug 4 14:47:29 machine1600 kernel: ACPI: Power Button (FF) [PWRF] Aug 4 14:47:29 machine1600 kernel: ACPI: Lid Switch [LID] Aug 4 14:47:29 machine1600 kernel: ACPI: Sleep Button (CM) [SLPB] Aug 4 14:47:29 machine1600 kernel: ACPI: Fan [FN00] (off) Aug 4 14:47:29 machine1600 kernel: ACPI: CPU0 (power states: C1[C1] C2[C2] C3 [C3]) Aug 4 14:47:29 machine1600 kernel: ACPI: Processor [CPU1] (supports 8 throttling states) Aug 4 14:47:29 machine1600 kernel: ACPI: Thermal Zone [THRM] (45 C) Aug 4 14:47:29 machine1600 kernel: ACPI: AC Adapter [AC0] (off-line) Aug 4 14:47:29 machine1600 hotplug: Hotplug (acpi.rc) start: succeeded Aug 4 14:47:29 machine1600 rc: Starting fbsetfont: succeeded Aug 4 14:47:29 machine1600 acpid: acpid startup succeeded Aug 4 14:47:29 machine1600 keytable: Loading keymap: ruwin_ct_sh-UTF-8 Aug 4 14:47:29 machine1600 loadkeys: Loading /usr/lib/kbd/keymaps/i386/qwerty/ruwin_ct_sh-UTF-8.kmap.gz Aug 4 14:47:29 machine1600 setsyskeytable: Loading keymap: ruwin_ct_sh-UTF-8 succeeded Aug 4 14:47:29 machine1600 keytable: ^[[73G Aug 4 14:47:29 machine1600 keytable: [ Aug 4 14:47:29 machine1600 keytable: ^[[1m^[[32m Aug 4 14:47:29 machine1600 keytable: DONE Aug 4 14:47:29 machine1600 keytable: ^[[39;49m^[[0;10m Aug 4 14:47:29 machine1600 keytable: Loading compose keys: compose.latin.inc Aug 4 14:47:29 machine1600 loadkeys: Loading /usr/lib/kbd/keymaps/include/compose.latin.inc.gz Aug 4 14:47:29 machine1600 setsyskeytable: Loading compose keys: compose.latin.inc succeeded Aug 4 14:47:29 machine1600 keytable: ^[[73G Aug 4 14:47:29 machine1600 keytable: [ Aug 4 14:47:29 machine1600 keytable: ^[[1m^[[32m Aug 4 14:47:29 machine1600 keytable: DONE Aug 4 14:47:29 machine1600 keytable: ^[[39;49m^[[0;10m Aug 4 14:47:29 machine1600 keytable: Binding extra Win keys, loading: windowkeys-compose.inc Aug 4 14:47:29 machine1600 loadkeys: Loading /usr/lib/kbd/keymaps/i386/include/windowkeys-compose.inc.gz Aug 4 14:47:29 machine1600 setsyskeytable: Binding extra Win keys, loading: windowkeys-compose.inc succeeded Aug 4 14:47:29 machine1600 keytable: ^[[73G Aug 4 14:47:29 machine1600 keytable: [ Aug 4 14:47:29 machine1600 keytable: ^[[1m^[[32m Aug 4 14:47:29 machine1600 keytable: DONE Aug 4 14:47:29 machine1600 keytable: ^[[39;49m^[[0;10m Aug 4 14:47:29 machine1600 keytable: The BackSpace key sends: ^? loading delete.inc Aug 4 14:47:29 machine1600 loadkeys: Loading /usr/lib/kbd/keymaps/i386/include/delete.inc.gz Aug 4 14:47:29 machine1600 setsyskeytable: The BackSpace key sends: ^? loading delete.inc succeeded Aug 4 14:47:29 machine1600 keytable: ^[[73G Aug 4 14:47:29 machine1600 keytable: [ Aug 4 14:47:29 machine1600 keytable: ^[[1m^[[32m Aug 4 14:47:29 machine1600 keytable: DONE Aug 4 14:47:29 machine1600 keytable: ^[[39;49m^[[0;10m Aug 4 14:47:29 machine1600 rc: Starting keytable: succeeded Aug 4 14:47:29 machine1600 update_wms: Updating Window Manager Sessions: succeeded Aug 4 14:47:29 machine1600 gpm[5118]: Started gpm successfully. Entered daemon mode. Aug 4 14:47:29 machine1600 gpm: gpm startup succeeded Aug 4 14:47:30 machine1600 crond[5148]: (CRON) STARTUP (V5.0) Aug 4 14:47:30 machine1600 crond: crond startup succeeded Aug 4 14:47:30 machine1600 anacron[5175]: Anacron 2.3 started on `2006-08-04 14:47:30' Aug 4 14:47:30 machine1600 anacron: anacron startup succeeded Aug 4 14:47:30 machine1600 anacron[5175]: Normal exit (0 jobs run) Aug 4 14:47:30 machine1600 xfs: xfs startup succeeded Aug 4 14:47:30 machine1600 dm: rundm startup succeeded Aug 4 14:47:31 machine1600 xfs[5221]: ignoring font path element /usr/X11R6/lib/X11/fonts/75dpi:unscaled (unreadable) Aug 4 14:47:31 machine1600 xfs[5221]: ignoring font path element /usr/X11R6/lib/X11/fonts/100dpi:unscaled (unreadable) Aug 4 14:47:31 machine1600 xfs[5221]: ignoring font path element /usr/X11R6/lib/X11/fonts/Speedo (unreadable) Aug 4 14:47:32 machine1600 messagebus: dbus-daemon startup succeeded Aug 4 14:47:32 machine1600 kdm_config[5613]: Unrecognized key 'UseLilo' in section [Shutdown] at /etc/X11/kdm/kdmrc:19 Aug 4 14:47:34 machine1600 fstab-sync[5642]: removed all generated mount points Aug 4 14:47:35 machine1600 hal: hald startup succeeded Aug 4 14:47:35 machine1600 xinetd: xinetd startup succeeded Aug 4 14:47:36 machine1600 rc: Starting rawdevices: succeeded Aug 4 14:47:36 machine1600 kernel: fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. Aug 4 14:47:36 machine1600 kernel: [fglrx] Maximum main memory to use for locked dma buffers: 315 MBytes. Aug 4 14:47:36 machine1600 kernel: ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17 Aug 4 14:47:36 machine1600 kernel: [fglrx] module loaded - fglrx 8.18.6 [Oct 11 2005] on minor 0 Aug 4 14:47:36 machine1600 kernel: [fglrx] free PCIe = 54804480 Aug 4 14:47:36 machine1600 kernel: [fglrx] max PCIe = 54804480 Aug 4 14:47:36 machine1600 kernel: [fglrx] free LFB = 119828480 Aug 4 14:47:36 machine1600 kernel: [fglrx] max LFB = 119828480 Aug 4 14:47:36 machine1600 kernel: [fglrx] free Inv = 0 Aug 4 14:47:36 machine1600 kernel: [fglrx] max Inv = 0 Aug 4 14:47:36 machine1600 kernel: [fglrx] total Inv = 0 Aug 4 14:47:36 machine1600 kernel: [fglrx] total TIM = 0 Aug 4 14:47:36 machine1600 kernel: [fglrx] total FB = 0 Aug 4 14:47:36 machine1600 kernel: [fglrx] total PCIe = 16384 Aug 4 14:47:38 machine1600 kernel: lp0: using parport0 (interrupt-driven). Aug 4 14:47:38 machine1600 kernel: lp0: console ready Aug 4 14:47:38 machine1600 cups: cupsd startup succeeded Aug 4 14:47:38 machine1600 powersaved: powersaved startup succeeded Aug 4 14:47:38 machine1600 postfix: Adjusting environment for postfix: succeeded Aug 4 14:47:39 machine1600 postfix: Checking postfix configuration: succeeded Aug 4 14:47:39 machine1600 postfix: Starting postfix: succeeded Aug 4 14:47:39 machine1600 slmodemd: Starting slmodem daemon: succeeded Aug 4 14:47:40 machine1600 nmbd[6178]: [2006/08/04 14:47:40, 0] nmbd/nmbd_subnetdb.c:create_subnets(217) Aug 4 14:47:40 machine1600 nmbd[6178]: create_subnets: No local interfaces ! Aug 4 14:47:40 machine1600 nmbd[6178]: [2006/08/04 14:47:40, 0] nmbd/nmbd_subnetdb.c:create_subnets(218) Aug 4 14:47:40 machine1600 nmbd[6178]: create_subnets: Waiting for an interface to appear ... Aug 4 14:47:41 machine1600 xinetd[5701]: 5701 {init_services} no services. Exiting... Aug 4 14:47:43 machine1600 smb: CIFS startup succeeded Aug 4 14:47:44 machine1600 winbindd[6201]: [2006/08/04 14:47:44, 0] nsswitch/winbindd_util.c:winbindd_param_init(555) Aug 4 14:47:44 machine1600 winbindd[6201]: winbindd: idmap uid range missing or invalid Aug 4 14:47:44 machine1600 winbindd[6201]: [2006/08/04 14:47:44, 0] nsswitch/winbindd_util.c:winbindd_param_init(556) Aug 4 14:47:44 machine1600 winbindd[6201]: winbindd: cannot continue, exiting. Aug 4 14:47:44 machine1600 winbind: Winbind startup succeeded Aug 4 14:48:00 machine1600 pam_tcb[5620]: kde: Authentication passed for dmitriy from (uid=0) Aug 4 14:48:00 machine1600 pam_tcb[5620]: kde: Session opened for dmitriy by (uid=0) Aug 4 14:48:38 machine1600 pam_tcb[6468]: su: Authentication passed for root from (uid=500) Aug 4 14:48:38 machine1600 pam_tcb[6468]: su: Session opened for root by (uid=500) Aug 4 14:57:23 machine1600 pam_tcb[6479]: kscreensaver: Authentication passed for dmitriy from (uid=500) Aug 4 15:00:07 machine1600 kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 Aug 4 15:00:07 machine1600 ifplugd(eth0)[4530]: Link beat detected. Aug 4 15:00:08 machine1600 ifplugd(eth0)[4530]: Executing '/etc/net/scripts/ifplugd.action eth0 up'. Aug 4 15:00:08 machine1600 kernel: NET: Registered protocol family 17 Aug 4 15:00:08 machine1600 dhcpcd.exe: interface eth0 has been configured with old IP=192.168.0.143 Aug 4 15:00:09 machine1600 ifplugd(eth0)[4530]: Program executed successfully. Aug 4 15:01:01 machine1600 pam_tcb[6633]: crond: Session opened for root by (uid=0) Aug 4 15:01:01 machine1600 crond[6635]: (root) CMD (run-parts /etc/cron.hourly) Aug 4 15:01:01 machine1600 pam_tcb[6633]: crond: Session closed for root Aug 4 15:06:00 machine1600 nmbd[6178]: [2006/08/04 15:06:00, 0] nmbd/nmbd_become_lmb.c:become_local_master_stage2(396) Aug 4 15:06:00 machine1600 nmbd[6178]: ***** --------------------------------------------------------------------------------------------------------------------------- С уважением. Антипов Дмитрий itadmin@mail.ru ICQ 326393631 --------------------------------------------------------------------------------------------------------------------------
next reply other threads:[~2006-08-04 18:39 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2006-08-04 18:39 Dmitriy [this message] 2006-08-07 8:34 ` Sergey Vlasov 2006-08-07 19:11 ` Dmitriy 2006-08-07 15:56 ` Sergey Vlasov 2006-08-08 12:54 ` dmitriy 2006-08-08 19:50 ` Michael Shigorin
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=200608042239.25019.itadmin@mail.ru \ --to=itadmin@mail.ru \ --cc=community@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git