From: Michael Shigorin <mike@osdn.org.ua>
To: community@lists.altlinux.org
Subject: Re: [Comm] переезд workstation на Compact 3.0.4, 1 вопрос
Date: Thu, 29 Jun 2006 09:01:31 +0300
Message-ID: <20060629060130.GD520@osdn.org.ua> (raw)
In-Reply-To: <20060628130618.5335d68c@greg>
[-- Attachment #1: Type: text/plain, Size: 305 bytes --]
On Wed, Jun 28, 2006 at 01:06:18PM +0400, Grigory Fateyev wrote:
> Поделитесь xorg.conf под 3.0 с карточкой nvidia и настроенным 3D?
Attached (практически штатный должен быть, дело не в нём,
а в симлинках)
--
---- WBR, Michael Shigorin <mike@altlinux.ru>
------ Linux.Kiev http://www.linux.kiev.ua/
[-- Attachment #2: xorg.conf --]
[-- Type: text/plain, Size: 7247 bytes --]
# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom
# This allows the server to start up even if the
# mouse device can't be opened/initialised.
AllowMouseOpenFail
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Keyboard section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "250 30"
Option "XkbModel" "pc105"
#Option "XkbLayout" "rua"
Option "XkbLayout" "us,ua,ru"
Option "XkbOptions" "grp:caps_toggle,grp_led:scroll,grp:switch"
EndSection
# **********************************************************************
# Pointer section
# **********************************************************************
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
#Option "Protocol" "ExplorerPS/2"
#Option "Device" "/dev/input/mice"
#Option "ButtonNumber" "9"
#Option "ZAxisMapping" "6 7 8 9"
## + see /etc/X11/xinit/Xmodmap
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
Section "Module"
# This loads the DBE extension module.
Load "dbe"
# This loads the Video for Linux module.
Load "v4l"
# This loads the NVIDIA GLX extension module.
# IT IS IMPORTANT TO KEEP NAME AS FULL PATH TO libglx.so ELSE
# IT WILL LOAD XFree86 glx module and the server will crash.
#Load "glx"
Load "glx"
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
#Option "omit xfree86-dga"
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
#Identifier "Siemens Nixdorf|Siemens Nixdorf MCM1702"
#VendorName "Siemens Nixdorf"
Identifier "Hitachi SuperScan 814"
VendorName "Hitachi"
ModelName "Hitachi SuperScan 814"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
#HorizSync 30-82
HorizSync 31-125
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
#VertRefresh 50-150
VertRefresh 50-160
# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.
# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
Identifier "Generic VGA"
Driver "vga"
EndSection
Section "Device"
Identifier "NVIDIA GeForce4 IGP"
VendorName "Unknown"
BoardName "Unknown"
# Driver "nv"
Driver "nvidia"
# VideoRam 4096
# Clock lines
# Uncomment following option if you see a big white block
# instead of the cursor!
Option "sw_cursor"
Option "DPMS" "on"
Option "BlankTime" "10"
Option "StandbyTime" "10"
Option "SuspendTime" "20"
Option "OffTime" "20"
Option "NoBandWidthTest"
Option "NvAGP" "1"
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
Section "Screen"
Identifier "screen1"
Device "NVIDIA GeForce4 IGP"
#Monitor "Siemens Nixdorf|Siemens Nixdorf MCM1702"
Monitor "Hitachi SuperScan 814"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "2048x1536" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 15
Modes "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1600x1200" "1400x1050" "1280x960" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1600x1200" "1400x1050" "1280x960" "1024x768" "800x600" "640x480"
#Modes "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
Screen "screen1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
next prev parent reply other threads:[~2006-06-29 6:01 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-25 17:46 Grigory Fateyev
2006-06-25 18:09 ` Хихин Руслан
2006-06-26 5:26 ` Xandry
2006-06-27 10:59 ` Grigory Fateyev
2006-06-26 7:33 ` Michael Shigorin
2006-06-26 14:44 ` Grigory Fateyev
2006-06-26 17:51 ` Michael Shigorin
2006-06-28 9:06 ` Grigory Fateyev
2006-06-29 6:01 ` Michael Shigorin [this message]
2006-06-29 10:05 ` Grigory Fateyev
2006-06-29 10:23 ` Michael Shigorin
2006-06-29 11:11 ` Grigory Fateyev
2006-06-29 11:15 ` Michael Shigorin
2006-06-29 12:04 ` Grigory Fateyev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060629060130.GD520@osdn.org.ua \
--to=mike@osdn.org.ua \
--cc=community@lists.altlinux.org \
--cc=shigorin@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git