[Comm] переезд workstation на Compact 3.0.4, 1 вопрос

[Comm] переезд workstation на Compact 3.0.4, 1 вопрос

[@ 2006-06-25 17:46 UTC (permalink / raw)]

Re: [Comm] переезд workstation на Compact 3.0.4, 1 вопрос

[@ 2006-06-25 18:09 UTC (permalink / raw)]

Re: [Comm] переезд workstation на Compact 3.0.4, 1 вопрос

[@ 2006-06-26 5:26 UTC (permalink / raw)]

Re: [Comm] переезд workstation на Compact 3.0.4, 1 вопрос

[@ 2006-06-26 7:33 UTC (permalink / raw)]

Re: [Comm] переезд workstation на Compact 3.0.4, 1 вопрос

[@ 2006-06-26 14:44 UTC (permalink / raw)]

Re: [Comm] переезд workstation на Compact 3.0.4, 1 вопрос

[Michael Shigorin]

On Mon, Jun 26, 2006 at 06:44:08PM +0400, Grigory Fateyev wrote:
> nvidia_glx_1.0.7676-1.0.7676-alt14
> kernel-modules-nvidia-std26-up-1.0.7676-alt1.132620.10
> nvidia_glx_common-1.0.7676-alt14

Вроде так.

> > x11setupdrv
> > /etc/X11/drv.d/nvidia
> direct rendering: No
> OpenGL renderer string: GeForce FX 5600XT/AGP/SSE/3DNOW!
> gears ~2100
> И скриншот с GLX заработал.
> Но показывает типа rendering: No
> Странно всё это.

Софтовый.

2 shrek: не напомнишь, как в 3.0 оно настраивалось?
Недавно делал, да что-то как сквозь туман...

-- 
 ---- WBR, Michael Shigorin <mike@altlinux.ru>
  ------ Linux.Kiev http://www.linux.kiev.ua/

Re: [Comm] переезд workstation на Compact 3.0.4, 1 вопрос

[Grigory Fateyev]

Hello Xandry!
On Mon, 26 Jun 2006 11:26:19 +0600 you wrote:

> > Что не так?
> Драйвер Nvidia из .rpm или .sh?

nvidia_glx_1.0.7676-1.0.7676-alt14
kernel-modules-nvidia-std26-up-1.0.7676-alt1.132620.10
nvidia_glx_common-1.0.7676-alt14

-- 
Всего наилучшего!
greg [at] anastasia [dot] ru Григорий.

Re: [Comm] переезд workstation на Compact 3.0.4, 1 вопрос

[Grigory Fateyev]

Hello Michael Shigorin!
On Mon, 26 Jun 2006 20:51:49 +0300 you wrote:

> On Mon, Jun 26, 2006 at 06:44:08PM +0400, Grigory Fateyev wrote:
> > nvidia_glx_1.0.7676-1.0.7676-alt14
> > kernel-modules-nvidia-std26-up-1.0.7676-alt1.132620.10
> > nvidia_glx_common-1.0.7676-alt14
> 
> Вроде так.
> 
> > > x11setupdrv
> > > /etc/X11/drv.d/nvidia
> > direct rendering: No
> > OpenGL renderer string: GeForce FX 5600XT/AGP/SSE/3DNOW!
> > gears ~2100
> > И скриншот с GLX заработал.
> > Но показывает типа rendering: No
> > Странно всё это.
> 
> Софтовый.
> 
> 2 shrek: не напомнишь, как в 3.0 оно настраивалось?
> Недавно делал, да что-то как сквозь туман...
 
Поделитесь xorg.conf под 3.0 с карточкой nvidia и настроенным 3D?

-- 
Всего наилучшего!
greg [at] anastasia [dot] ru Григорий.

Re: [Comm] переезд workstation на Compact 3.0.4, 1 вопрос

[Michael Shigorin]

[-- Attachment #1: Type: text/plain, Size: 305 bytes --]

On Wed, Jun 28, 2006 at 01:06:18PM +0400, Grigory Fateyev wrote:
> Поделитесь xorg.conf под 3.0 с карточкой nvidia и настроенным 3D?

Attached (практически штатный должен быть, дело не в нём,
а в симлинках)

-- 
 ---- WBR, Michael Shigorin <mike@altlinux.ru>
  ------ Linux.Kiev http://www.linux.kiev.ua/

[-- Attachment #2: xorg.conf --]
[-- Type: text/plain, Size: 7247 bytes --]


# File generated by XFdrake.

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

Section "Files"

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.

    FontPath   "unix/:-1"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

    # Uncomment this to cause a core dump at the spot where a signal is
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    #NoTrapSignals

    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    #DontZap

    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    #DontZoom

    # This  allows  the  server  to start up even if the
    # mouse device can't be opened/initialised.
    AllowMouseOpenFail

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "InputDevice"

    Identifier "Keyboard1"
    Driver      "kbd"
    Option "AutoRepeat"  "250 30"

    Option "XkbModel" "pc105"
    #Option "XkbLayout" "rua"
    Option "XkbLayout" "us,ua,ru"
    Option "XkbOptions"  "grp:caps_toggle,grp_led:scroll,grp:switch"

EndSection

# **********************************************************************
# Pointer section
# **********************************************************************

Section "InputDevice"

    Identifier  "Mouse1"
    Driver      "mouse"
    Option "Protocol"    "IMPS/2"
    Option "Device"      "/dev/psaux"
    Option "ZAxisMapping" "4 5"
    #Option "Protocol"    "ExplorerPS/2"
    #Option "Device"      "/dev/input/mice"
    #Option "ButtonNumber" "9"
    #Option "ZAxisMapping" "6 7 8 9"
    ## + see /etc/X11/xinit/Xmodmap
#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection



Section "Module"

# This loads the DBE extension module.

    Load	"dbe"

# This loads the Video for Linux module.
    Load        "v4l"

# This loads the NVIDIA GLX extension module.
# IT IS IMPORTANT TO KEEP NAME AS FULL PATH TO libglx.so ELSE
# IT WILL LOAD XFree86 glx module and the server will crash.

    #Load        "glx"
    Load        "glx"


# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.

    SubSection	"extmod"
	#Option	"omit xfree86-dga"
    EndSubSection

# This loads the Type1 and FreeType font modules

    Load	"type1"
    Load	"freetype"
EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    #Identifier "Siemens Nixdorf|Siemens Nixdorf MCM1702"
    #VendorName "Siemens Nixdorf"
    Identifier "Hitachi SuperScan 814"
    VendorName "Hitachi"
    ModelName  "Hitachi SuperScan 814"


# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    #HorizSync  30-82
    HorizSync  31-125


# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    #VertRefresh 50-150
    VertRefresh 50-160


# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.

# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480"    65.00 1024 1032 1176 1344   480  488  494  563 -hsync -vsync

# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616


EndSection



# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
    Identifier "Generic VGA"
    Driver     "vga"
EndSection

Section "Device"
    Identifier  "NVIDIA GeForce4 IGP"
    VendorName  "Unknown"
    BoardName   "Unknown"
#    Driver      "nv"
    Driver      "nvidia"
#    VideoRam    4096
    # Clock lines


    # Uncomment following option if you see a big white block        
    # instead of the cursor!                                          
        Option      "sw_cursor"

    Option      "DPMS"  "on"
    Option "BlankTime"  "10"
    Option "StandbyTime"  "10"
    Option "SuspendTime"  "20"
    Option "OffTime"  "20"
    Option "NoBandWidthTest"
	Option "NvAGP" "1"
EndSection



# **********************************************************************
# Screen sections
# **********************************************************************


Section "Screen"
    Identifier "screen1"
    Device      "NVIDIA GeForce4 IGP"
    #Monitor     "Siemens Nixdorf|Siemens Nixdorf MCM1702"
    Monitor     "Hitachi SuperScan 814"
    DefaultColorDepth 24
    Subsection "Display"
        Depth       8
        Modes       "2048x1536" "1152x864" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       15
        Modes       "1152x864" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1600x1200" "1400x1050" "1280x960" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1600x1200" "1400x1050" "1280x960" "1024x768" "800x600" "640x480"
        #Modes       "1152x864" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes       "1152x864" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection


Section "ServerLayout"
    Identifier "layout1"
    Screen     "screen1"

    InputDevice "Mouse1" "CorePointer"

    InputDevice "Keyboard1" "CoreKeyboard"
EndSection

Re: [Comm] переезд workstation на Compact 3.0.4, 1 вопрос

[Grigory Fateyev]

Hello Michael Shigorin!
On Thu, 29 Jun 2006 09:01:31 +0300 you wrote:

> On Wed, Jun 28, 2006 at 01:06:18PM +0400, Grigory Fateyev wrote:
> > Поделитесь xorg.conf под 3.0 с карточкой nvidia и настроенным 3D?
> 
> Attached (практически штатный должен быть, дело не в нём,
> а в симлинках)
> 

В таком случае, поделитесь выводом ls -l /usr/X11R6/lib/libG* при
условии, что у вас ядро 2.6.12-alt10 и nviaia драйвер 7676?

Спасибо заранее!
-- 
Всего наилучшего!
greg [at] anastasia [dot] ru Григорий.

Re: [Comm] переезд workstation на Compact 3.0.4, 1 вопрос

[Michael Shigorin]

On Thu, Jun 29, 2006 at 02:05:31PM +0400, Grigory Fateyev wrote:
> > > Поделитесь xorg.conf под 3.0 с карточкой nvidia и настроенным 3D?
> > Attached (практически штатный должен быть, дело не в нём,
> > а в симлинках)
> В таком случае, поделитесь выводом ls -l /usr/X11R6/lib/libG*

home:~> l /usr/X11R6/lib/libG* | cut -c45-
/usr/X11R6/lib/libGL.a
/usr/X11R6/lib/libGLcore.so.1 -> ../../../etc/X11/lib_nvidia/libGLcore.so.1
/usr/X11R6/lib/libGL.so -> libGL.so.1.2
/usr/X11R6/lib/libGL.so.1 -> ../../../etc/X11/lib/libGL.so.1
/usr/X11R6/lib/libGL.so.1.2 -> mesa_gl/libGL.so.1.2
/usr/X11R6/lib/libGLU.a
/usr/X11R6/lib/libGLU.so -> libGLU.so.1.3
/usr/X11R6/lib/libGLU.so.1 -> libGLU.so.1.3
/usr/X11R6/lib/libGLU.so.1.3
/usr/X11R6/lib/libGLw.a
/usr/X11R6/lib/libGLw.so -> libGLw.so.1.0
/usr/X11R6/lib/libGLw.so.1 -> libGLw.so.1.0
/usr/X11R6/lib/libGLw.so.1.0
home:~> l /etc/X11/lib*/libGL* | cut -c45-                        
/X11/lib/libGL.so.1 -> /usr/X11R6/lib/nvidia_1.0.7676/libGL.so.1
/X11/lib_nvidia/libGLcore.so.1 -> /usr/X11R6/lib/nvidia_1.0.7676/libGLcore.so.1

> при условии, что у вас ядро 2.6.12-alt10 и nviaia драйвер 7676?

home:~> uname -r; rpm -q nvidia_glx_common 
2.6.12-std26-up-alt6
nvidia_glx_common-1.0.7676-alt14

-- 
 ---- WBR, Michael Shigorin <mike@altlinux.ru>
  ------ Linux.Kiev http://www.linux.kiev.ua/

Re: [Comm] переезд workstation на Compact 3.0.4, 1 вопрос

[Grigory Fateyev]

Hello Michael Shigorin!
On Thu, 29 Jun 2006 13:23:38 +0300 you wrote:

> On Thu, Jun 29, 2006 at 02:05:31PM +0400, Grigory Fateyev wrote:
> > > > Поделитесь xorg.conf под 3.0 с карточкой nvidia и настроенным
> > > > 3D?
> > > Attached (практически штатный должен быть, дело не в нём,
> > > а в симлинках)
> > В таком случае, поделитесь выводом ls -l /usr/X11R6/lib/libG*
[...]
> home:~> l /etc/X11/lib*/libGL* | cut -c45-                        
> /X11/lib/libGL.so.1 -> /usr/X11R6/lib/nvidia_1.0.7676/libGL.so.1
> /X11/lib_nvidia/libGLcore.so.1
> -> /usr/X11R6/lib/nvidia_1.0.7676/libGLcore.so.1

Вот он источник проблемы :)
ls -l /etc/X11/lib*/libGL* | cut -c45-
/X11/lib/libGL.so.1 -> /usr/X11R6/lib/nvidia_1.0.7676/libGL.so.1
/X11/lib/libGL.so.1.old -> ../../../usr/X11R6/lib/mesa_gl/libGL.so.1.2
/X11/lib_nvidia/libGLcore.so.1
-> /usr/X11R6/lib/nvidia_1.0.7676/libGLcore.so.1

что сейчас libGL.so.1.old, раньше было реальной ссылкой. Теперь:
direct rendering: Yes
OpenGL renderer string: GeForce FX 5600XT/AGP/SSE/3DNOW!

Я безмерно счастлив :). Спасибо вам, Михаил!

P.S. Может куда закинуть для потомков?
-- 
Всего наилучшего!
greg [at] anastasia [dot] ru Григорий.

Re: [Comm] переезд workstation на Compact 3.0.4, 1 вопрос

[Michael Shigorin]

On Thu, Jun 29, 2006 at 03:11:08PM +0400, Grigory Fateyev wrote:
> P.S. Может куда закинуть для потомков?

http://www.freesource.info/wiki/Altlinux/HCL/

-- 
 ---- WBR, Michael Shigorin <mike@altlinux.ru>
  ------ Linux.Kiev http://www.linux.kiev.ua/

Re: [Comm] переезд workstation на Compact 3.0.4, 1 вопрос

[Grigory Fateyev]

Hello Michael Shigorin!
On Thu, 29 Jun 2006 14:15:31 +0300 you wrote:

> On Thu, Jun 29, 2006 at 03:11:08PM +0400, Grigory Fateyev wrote:
> > P.S. Может куда закинуть для потомков?
> 
> http://www.freesource.info/wiki/Altlinux/HCL/
> 
Done.

-- 
Всего наилучшего!
greg [at] anastasia [dot] ru Григорий.