* [Comm] lm_sensors
@ 2006-05-25 8:32 Anton Gorlov
2006-05-25 9:54 ` Vasily Kolomeets
2006-05-25 10:21 ` Vasily Kolomeets
0 siblings, 2 replies; 4+ messages in thread
From: Anton Gorlov @ 2006-05-25 8:32 UTC (permalink / raw)
To: Список
рассылки
по
использованию
дистрибутивов
ALT Linux
А где можно посомтреть инфу о том что выдаёт lm_sensors (про sensors в
консоли знаю..)? Вроде в /proc/acpi что-то должно быть..а не вижу.
ещё sensors возвращает несколько интеерсные данные
[root@zeon root]# sensors
lm90-i2c-0-4c
Adapter: SMBus Via Pro adapter at 5000
M/B Temp: +42 C (low = +0 C, high = +70 C)
CPU Temp: +61.4 C (low = +0.0 C, high = +70.0 C)
M/B Crit: +97 C (hyst = +87 C)
CPU Crit: +97 C (hyst = +87 C)
eeprom-i2c-0-50
Adapter: SMBus Via Pro adapter at 5000
Memory type: DDR SDRAM DIMM
Memory size (MB): 256
it87-isa-0290
Adapter: ISA adapter
VCore 1: +1.58 V (min = +1.42 V, max = +1.57 V) ALARM
VCore 2: +3.30 V (min = +2.40 V, max = +2.61 V) ALARM
+3.3V: +6.62 V (min = +3.14 V, max = +3.46 V) ALARM
+5V: +4.87 V (min = +4.74 V, max = +5.24 V)
+12V: +11.76 V (min = +11.40 V, max = +12.60 V)
-12V: -18.92 V (min = -12.63 V, max = -11.41 V) ALARM
-5V: -2.82 V (min = -5.24 V, max = -4.76 V) ALARM
Stdby: +4.97 V (min = +4.74 V, max = +5.24 V)
VBat: +3.01 V
fan1: 2766 RPM (min = 0 RPM, div = 8)
fan2: 0 RPM (min = 3013 RPM, div = 8) ALARM
fan3: 0 RPM (min = 3013 RPM, div = 8)
M/B Temp: +50 C (low = +15 C, high = +40 C) sensor = thermistor
CPU Temp: +34 C (low = +15 C, high = +45 C) sensor = thermistor
Temp3: +44 C (low = +15 C, high = +45 C) sensor = thermistor
почему такая разница в температурах между
lm90-i2c-0-4c и
it87-isa-0290
Adapter: ISA adapter?
--
np: Lordi - Hard Rock Hallelujah
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Comm] lm_sensors
2006-05-25 8:32 [Comm] lm_sensors Anton Gorlov
@ 2006-05-25 9:54 ` Vasily Kolomeets
2006-05-25 10:21 ` Vasily Kolomeets
1 sibling, 0 replies; 4+ messages in thread
From: Vasily Kolomeets @ 2006-05-25 9:54 UTC (permalink / raw)
To: ALT Linux Community
В сообщении от 25 Май 2006 14:32 Anton Gorlov написал(a):
> А где можно посомтреть инфу о том что выдаёт lm_sensors (про sensors
> в консоли знаю..)? Вроде в /proc/acpi что-то должно быть..а не вижу.
/proc/sys/dev/sensors/ ?
--
Whatever you do will be insignificant, but it is very important that you
do it.
-- Mahatma Gandhi
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Comm] lm_sensors
2006-05-25 8:32 [Comm] lm_sensors Anton Gorlov
2006-05-25 9:54 ` Vasily Kolomeets
@ 2006-05-25 10:21 ` Vasily Kolomeets
2006-05-27 6:37 ` Anton Gorlov
1 sibling, 1 reply; 4+ messages in thread
From: Vasily Kolomeets @ 2006-05-25 10:21 UTC (permalink / raw)
To: ALT Linux Community
В сообщении от 25 Май 2006 14:32 Anton Gorlov написал(a):
> ещё sensors возвращает несколько интеерсные данные
...
> почему такая разница в температурах между
> lm90-i2c-0-4c и
Это на каком ядре?
> it87-isa-0290
> Adapter: ISA adapter?
Ага.
--
Really, KDE code is not rocket science.
-- Adriaan de Groot (adridg) in KDE Planet
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Comm] lm_sensors
2006-05-25 10:21 ` Vasily Kolomeets
@ 2006-05-27 6:37 ` Anton Gorlov
0 siblings, 0 replies; 4+ messages in thread
From: Anton Gorlov @ 2006-05-27 6:37 UTC (permalink / raw)
To: ALT Linux Community
Vasily Kolomeets пишет:
>> ещё sensors возвращает несколько интеерсные данные
>> почему такая разница в температурах между
>> lm90-i2c-0-4c и
> Это на каком ядре?
2.4.26-std-up-alt6
--
np: Arda - Net Nikogo
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2006-05-27 6:37 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-05-25 8:32 [Comm] lm_sensors Anton Gorlov
2006-05-25 9:54 ` Vasily Kolomeets
2006-05-25 10:21 ` Vasily Kolomeets
2006-05-27 6:37 ` Anton Gorlov
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git