From: "Aleksey E. Birukov" <birukov@vladinfo.ru> To: Sisyphus@lists.altlinux.org, Community@lists.altlinux.org Subject: [Comm] Configuring DVB (eutelsat w3) Date: Tue, 25 Oct 2005 15:29:56 +0400 Message-ID: <200510251529.56795.birukov@vladinfo.ru> (raw) Извините за оффтоп. Мне срочно нужна помощь по настройке DVB. Я написал письмо в службу поддрержки (opensky-support@broadsat.com) и на форум провайдера (http://forum.broadsat.com/), но мне пока не ответили. Надеюсь, что здесь найдутся знающие люди, готовые помочь. Описываю, что я делал по шагам: My steps: 1. # cat sky2 #!/bin/bash # sky2 #V 1.3 - 15.05.2004 #V 1.2 - 18.02.2004 #Version 1.1 - 17.11.2003 #V 1.0 - 13.11.2003 #Whereis szap (tuner) program SZAP=/usr/bin/szap #Whereis dvbnet (DATA PID) program DVBNET=/usr/bin/dvbnet #Number of Channel CH=5 # Internet:11449:v:0:27500:0:0:2 #Data PID=3011 # 3010, 3011, 3021 #Device Number DEV_NAME=dvb0_0 #IP address of DVB IP_ADDR=192.168.55.1 #MAC Address MAC_ADDR=00:d0:d7:0e:7d:8D #Location of config file Conf_File=/etc/channels.conf case "$1" in start) #/sbin/ifconfig $DEV_NAME down #/sbin/rmmod skystar2 #/sbin/rmmod mt312 #/sbin/rmmod dvb-core # #/sbin/insmod dvb-core dvb_shutdown_timeout=0 #/sbin/insmod mt312 #/sbin/insmod skystar2 #/sbin/insmod input #/sbin/ifconfig $DEV_NAME $IP_ADDR $DVBNET -p $PID $SZAP -c $Conf_File -n$CH -x /sbin/ifconfig $DEV_NAME $IP_ADDR /sbin/ifconfig $DEV_NAME hw ether $MAC_ADDR echo 0 > /proc/sys/net/ipv4/conf/dvb0_0/rp_filter ;; stop) echo "Stopping Device" /sbin/ifconfig $DEV_NAME down $DVBNET -d 0 #/sbin/rmmod skystar2 #/sbin/rmmod mt312 #/sbin/rmmod dvb-core ;; status) echo "" echo "Device status" echo "" /sbin/ifconfig $DEV_NAME echo"" echo "Tune status" echo "" $SZAP -c $Conf_File -n$CH -x ;; *) echo "Usage: `basename $0` {restart|stop|status}" exit 1 ;; esac 2. # ./sky2 start DVB Network Interface Manager Version 1.1.0-TVF (Build Sun Aug 14 18:57:12 2005) Copyright (C) 2003, TV Files S.p.A Device: /dev/dvb/adapter0/net0 Status: device dvb0_0 for pid 3011 created successfully. reading channels from file '/etc/channels.conf' zapping to 5 'Internet': sat 0, frequency = 11449 MHz V, symbolrate 27500000, vpid = 0x0000, apid = 0x0000 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 01 | signal bd30 | snr 71fd | ber 00000006 | unc 00000000 | status 1f | signal bd77 | snr c37b | ber 000000a6 | unc 00000000 | FE_HAS_LOCK 3. # ifconfig dvb0_0 Link encap:Ethernet HWaddr 00:D0:D7:0E:7D:8D inet addr:192.168.55.1 Bcast:192.168.55.255 Mask:255.255.255.0 UP BROADCAST RUNNING NOARP MULTICAST MTU:4096 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Base address:0xbc3 eth0 Link encap:Ethernet HWaddr 00:80:48:25:26:55 inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:270 errors:0 dropped:0 overruns:0 frame:0 TX packets:331 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:33377 (32.5 KiB) TX bytes:38442 (37.5 KiB) Interrupt:10 Base address:0xe000 eth1 Link encap:Ethernet HWaddr 00:80:48:25:16:0F inet addr:83.222.65.55 Bcast:83.222.65.63 Mask:255.255.255.240 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:8544 errors:0 dropped:0 overruns:0 frame:0 TX packets:7005 errors:0 dropped:0 overruns:0 carrier:0 collisions:12 txqueuelen:1000 RX bytes:2043717 (1.9 MiB) TX bytes:617327 (602.8 KiB) Interrupt:11 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2166 errors:0 dropped:0 overruns:0 frame:0 TX packets:2166 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:306622 (299.4 KiB) TX bytes:306622 (299.4 KiB) 4. https://sdr.eutelsat.net/servlets/satlogin type login & passowrd 5. see the page https://sdr.eutelsat.net/servlets/login-7e 6. Configuring my browser proxy: 193.251.135.103 8080 7. http://google.com -->> connection time aut! What is wrong? Some additional information for previous letter: 1. $ telnet 193.251.135.103 8080 Trying 193.251.135.103... telnet: connect to address 193.251.135.103: Connection timed out $ ping 193.251.135.103 PING 193.251.135.103 (193.251.135.103) 56(84) bytes of data. --- 193.251.135.103 ping statistics --- 37 packets transmitted, 0 received, 100% packet loss, time 36001ms P.S. $ telnet broadsat.com 80 Trying 213.188.200.196... Connected to broadsat.com. Escape character is '^]'. # tcpdump -i dvb0_0 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on dvb0_0, link-type EN10MB (Ethernet), capture size 96 bytes (empty) # dvbtraffic (empty) # uname -a Linux localhost 2.6.12-wks26-up-alt4 #1 Tue Aug 9 14:06:25 MSD 2005 i686 unknown unknown GNU/Linux -- $respect
reply other threads:[~2005-10-25 11:29 UTC|newest] Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=200510251529.56795.birukov@vladinfo.ru \ --to=birukov@vladinfo.ru \ --cc=Community@lists.altlinux.org \ --cc=Sisyphus@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git