From: Grigory Tuboltsev <gtubolcev@newmail.ru>
To: community@altlinux.ru
Subject: [Comm] dvdrom and cdrw troubles
Date: Sun, 18 Sep 2005 14:15:03 +0200
Message-ID: <20050918141503.65e069dd.gtubolcev@newmail.ru> (raw)
Помогите пожалуйста разобраться: что-то у меня загадочное творится с
приводами. Вот что есть:
-----------------------------------------
[root@localhost root]# dmesg | grep hd
ide0: BM-DMA at 0x1020-0x1027, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1028-0x102f, BIOS settings: hdc:pio, hdd:DMA
hda: Maxtor 90871U2, ATA DISK drive
hdc: MATSHITADVD-ROM SR-8585, ATAPI CD/DVD-ROM drive
hdd: HL-DT-ST GCE-8526B, ATAPI CD/DVD-ROM drive
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 16514064 sectors (8455 MB) w/512KiB Cache, CHS=17475/15/63,
UDMA(66) hda: [PTBL] [1092/240/63] hda1 hda2 hda3
SCSI device sda: 17783249 512-byte hdwr sectors (9105 MB)
ide-scsi: ignoring drive hdc
hdd: attached ide-scsi driver.
hdc: attached ide-cdrom driver.
hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
ATAPI device hdc:
(повторяется 19 раз :)
ATAPI device hdc:
hdc: irq timeout: status=0xd0 { Busy }
hdc: irq timeout: error=0xd0LastFailedSense 0x0d
hdc: DMA disabled
hdc: ATAPI reset timed-out, status=0x80
hdd: DMA disabled
hdc: status timeout: status=0x80 { Busy }
hdc: status timeout: error=0x80LastFailedSense 0x08
hdc: drive not ready for command
hdc: ATAPI reset complete
-----------------------------------------
В fstab
-----------------------------------------
/dev/cdrom /mnt/cdrom subfs fs= cdfss, noexec, nodev, nosuid, ro 0 0
/dev/fd0 /mnt/floppy subfs fs=floppyfss,sync,noexec,nodev,nosuid 0 0
/dev/hdd /mnt/cdrom2 subfs fs=cdfss,kudzu,noexec,nodev,nosuid,ro 0 0
-----------------------------------------
/dev/cdrom показывает в /dev/hdc
Диск с данными читается и монтируется в обоих приводах. Если втыкаю
аудио сд, и включаю хммс то получаю на 12-ой консоли:
-----------------------------------------
hdc: command error: error=0x54
end_request: I/O error, dev 16:00 (hdc), sector 989212
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
end_request: I/O error, dev 16:00 (hdc), sector 988188
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
end_request: I/O error, dev 16:00 (hdc), sector 987964
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
end_request: I/O error, dev 16:00 (hdc), sector 1248
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x54
end_request: I/O error, dev 16:00 (hdc), sector 1024
UDF-fs DEBUG misc.c:274:udf_read_tagged: block=256, location=256: read
failed UDF-fs DEBUG super.c:1211:udf_load_partition: No Anchor block
found UDF-fs: No partition found (1)
(повторяется сотни раз)
-----------------------------------------
Что бы это могло быть ? Может, это двд привод не хочет именно эти
болванки читать ? Или дохлый он ? Или шлейф заменить ?
Заранее спасибо,
С уважением,
Григорий Тубольцев
reply other threads:[~2005-09-18 12:15 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050918141503.65e069dd.gtubolcev@newmail.ru \
--to=gtubolcev@newmail.ru \
--cc=community@altlinux.ru \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git