* [Comm] Настройка принтера...
@ 2005-08-18 8:30 Шишков Евгений
2005-08-18 12:23 ` [Comm] " Дмитриев Михаил Николаевич
0 siblings, 2 replies; 10+ messages in thread
From: Шишков Евгений @ 2005-08-18 8:30 UTC (permalink / raw)
To: Community ALTLinux
Здравствуйте
Вот бьюсь с принтером уже вторую неделю.
Принтер подключен к машине с виндой. Надо на него печатать с линукса.
Пробовал 2 способа: через самбу и LPD
В обоих случаях задание доходит до винды и размещается в спуле.
Но печатать не хочет - Ошибка печати.
Пробовал драйвера менять (HP1005 принтер). Ставил: HP1005, HPLaserJet
Series, RAW. Ни что не помогло.
--
С уважением,
Шишков Евгений (evgen[sobak]tulanews[dot]ru)
^ permalink raw reply [flat|nested] 10+ messages in thread
[parent not found: <2f0049de0508180425510fbc57@mail.gmail.com>]
* Re: [Comm] Настройка принтера...
@ 2005-08-18 11:45 ` Шишков Евгений
2005-08-19 5:24 ` Шишков Евгений
1 sibling, 0 replies; 10+ messages in thread
From: Шишков Евгений @ 2005-08-18 11:45 UTC (permalink / raw)
To: ALT Linux Community
Dmitry Marochko пишет:
>>
>>Вот бьюсь с принтером уже вторую неделю.
>>Принтер подключен к машине с виндой. Надо на него печатать с линукса.
>>Пробовал 2 способа: через самбу и LPD
>>В обоих случаях задание доходит до винды и размещается в спуле.
>>Но печатать не хочет - Ошибка печати.
>>Пробовал драйвера менять (HP1005 принтер). Ставил: HP1005, HPLaserJet
>>Series, RAW. Ни что не помогло.
>
>
>
> Возможно формат данных печати оказывается не тот, которых ожидает принтер.
> Попробуйте поставить foo2zjs и его враппер в ZJStream, а в качестве порта
> указать порт виндовой машины через LPD или Самбу. У меня есть foo2zjs,
> собранный под Мастер 2.4. На моем hp1000 локально работает без проблем. Если
> интересуетесь - вечером могу скинуть.
Скиньте plz.
Буду примного благодарен.
--
С уважением,
Шишков Евгений (evgen[sobak]tulanews[dot]ru)
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Comm] Настройка принтера...
2005-08-18 11:45 ` Шишков Евгений
@ 2005-08-19 5:24 ` Шишков Евгений
1 sibling, 1 reply; 10+ messages in thread
From: Шишков Евгений @ 2005-08-19 5:24 UTC (permalink / raw)
To: ALT Linux Community
Dmitry Marochko пишет:
>>
>>Вот бьюсь с принтером уже вторую неделю.
>>Принтер подключен к машине с виндой. Надо на него печатать с линукса.
>>Пробовал 2 способа: через самбу и LPD
>>В обоих случаях задание доходит до винды и размещается в спуле.
>>Но печатать не хочет - Ошибка печати.
>>Пробовал драйвера менять (HP1005 принтер). Ставил: HP1005, HPLaserJet
>>Series, RAW. Ни что не помогло.
>
>
>
> Возможно формат данных печати оказывается не тот, которых ожидает принтер.
> Попробуйте поставить foo2zjs и его враппер в ZJStream, а в качестве порта
> указать порт виндовой машины через LPD или Самбу. У меня есть foo2zjs,
> собранный под Мастер 2.4. На моем hp1000 локально работает без проблем. Если
> интересуетесь - вечером могу скинуть.
Говорю огромное спасибо Дмитрию.
Всё заработало. Советую в backports его пакетик.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Comm] Настройка принтера...
2005-08-18 8:30 [Comm] Настройка принтера Шишков Евгений
@ 2005-08-18 12:23 ` Дмитриев Михаил Николаевич
2005-08-18 13:04 ` Шишков Евгений
1 sibling, 1 reply; 10+ messages in thread
From: Дмитриев Михаил Николаевич @ 2005-08-18 12:23 UTC (permalink / raw)
To: ALT Linux Community
Шишков Евгений пишет:
> Здравствуйте
>
> Вот бьюсь с принтером уже вторую неделю.
> Принтер подключен к машине с виндой. Надо на него печатать с линукса.
> Пробовал 2 способа: через самбу и LPD
> В обоих случаях задание доходит до винды и размещается в спуле.
> Но печатать не хочет - Ошибка печати.
На всякий пожарный:
- труд Aleksander N.Gorohovski "Рецепт "приготовления" Win-принтера для
печати из Linux" читали?
- На виндовой машине что-либо ставили (RedMon, GhostScript for windows)?
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Comm] Настройка принтера...
2005-08-18 12:23 ` [Comm] " Дмитриев Михаил Николаевич
@ 2005-08-18 13:04 ` Шишков Евгений
2005-08-18 13:20 ` Дмитриев Михаил Николаевич
0 siblings, 1 reply; 10+ messages in thread
From: Шишков Евгений @ 2005-08-18 13:04 UTC (permalink / raw)
To: ALT Linux Community
Дмитриев Михаил Николаевич пишет:
>> Вот бьюсь с принтером уже вторую неделю.
>> Принтер подключен к машине с виндой. Надо на него печатать с линукса.
>> Пробовал 2 способа: через самбу и LPD
>> В обоих случаях задание доходит до винды и размещается в спуле.
>> Но печатать не хочет - Ошибка печати.
>
> На всякий пожарный:
>
> - труд Aleksander N.Gorohovski "Рецепт "приготовления" Win-принтера для
> печати из Linux" читали?
Нет. Не читал. Сейчас почитал и ужаснулся. Слов нет....
> - На виндовой машине что-либо ставили (RedMon, GhostScript for windows)?
Нет. Только службу печати Unix (что-то вроде того)
--
С уважением,
Шишков Евгений (evgen[sobak]tulanews[dot]ru)
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Comm] Настройка принтера...
2005-08-18 13:04 ` Шишков Евгений
@ 2005-08-18 13:20 ` Дмитриев Михаил Николаевич
2005-08-18 13:41 ` Шишков Евгений
0 siblings, 1 reply; 10+ messages in thread
From: Дмитриев Михаил Николаевич @ 2005-08-18 13:20 UTC (permalink / raw)
To: ALT Linux Community
Шишков Евгений пишет:
> Дмитриев Михаил Николаевич пишет:
>
>>> Вот бьюсь с принтером уже вторую неделю.
>>> Принтер подключен к машине с виндой. Надо на него печатать с линукса.
>>> Пробовал 2 способа: через самбу и LPD
>>> В обоих случаях задание доходит до винды и размещается в спуле.
>>> Но печатать не хочет - Ошибка печати.
>>
>>
>> На всякий пожарный:
>>
>> - труд Aleksander N.Gorohovski "Рецепт "приготовления" Win-принтера
>> для печати из Linux" читали?
>
> Нет. Не читал. Сейчас почитал и ужаснулся. Слов нет....
Ну дык может последовать рецепту?
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Comm] Настройка принтера...
2005-08-18 13:20 ` Дмитриев Михаил Николаевич
@ 2005-08-18 13:41 ` Шишков Евгений
0 siblings, 0 replies; 10+ messages in thread
From: Шишков Евгений @ 2005-08-18 13:41 UTC (permalink / raw)
To: ALT Linux Community
Дмитриев Михаил Николаевич пишет:
>> Дмитриев Михаил Николаевич пишет:
>>
>>>> Вот бьюсь с принтером уже вторую неделю.
>>>> Принтер подключен к машине с виндой. Надо на него печатать с линукса.
>>>> Пробовал 2 способа: через самбу и LPD
>>>> В обоих случаях задание доходит до винды и размещается в спуле.
>>>> Но печатать не хочет - Ошибка печати.
>>>
>>>
>>>
>>> На всякий пожарный:
>>>
>>> - труд Aleksander N.Gorohovski "Рецепт "приготовления" Win-принтера
>>> для печати из Linux" читали?
>>
>>
>> Нет. Не читал. Сейчас почитал и ужаснулся. Слов нет....
>
>
> Ну дык может последовать рецепту?
Для начала проверю рецепт Dmitry Marochko aka Mothlike
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2005-08-20 9:22 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-08-18 8:30 [Comm] Настройка принтера Шишков Евгений
2005-08-18 11:45 ` Шишков Евгений
2005-08-19 5:24 ` Шишков Евгений
2005-08-19 13:34 ` [Comm] " Michael Shigorin
2005-08-20 9:19 ` Dmitry Marochko
2005-08-20 9:22 ` Michael Shigorin
2005-08-18 12:23 ` [Comm] " Дмитриев Михаил Николаевич
2005-08-18 13:04 ` Шишков Евгений
2005-08-18 13:20 ` Дмитриев Михаил Николаевич
2005-08-18 13:41 ` Шишков Евгений
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git