* [Comm] ошибка при комплияции matplotlib
@ 2005-05-27 11:26 Alexey Morsov
2005-05-27 11:29 ` Michael Isachenkov
2005-05-27 11:32 ` Anton Gorlov
0 siblings, 2 replies; 9+ messages in thread
From: Alexey Morsov @ 2005-05-27 11:26 UTC (permalink / raw)
To: ALT Linux Community
Привет,
что может означать такое сообщение от компилятора:
...
building 'matplotlib._agg' extension
creating build/temp.linux-i686-2.3
creating build/temp.linux-i686-2.3/src
creating build/temp.linux-i686-2.3/agg22
creating build/temp.linux-i686-2.3/agg22/src
i586-alt-linux-gcc -pthread -fno-strict-aliasing -DNDEBUG -pipe -Wall
-O2 -march=i586 -mcpu=i686 -fPIC -DPIC -D_GNU_SOURCE -fPIC
-Iagg22/include -Isrc -Iswig -I/usr/include/python2.3 -c
agg22/src/agg_trans_affine.cpp -o
build/temp.linux-i686-2.3/agg22/src/agg_trans_affine.o
i586-alt-linux-gcc: installation problem, cannot exec `cc1plus': No such
file or directory
error: command 'i586-alt-linux-gcc' failed with exit status 1
Что именно ему не хватает?
--
Всего наилучшего,
Системный Администратор ЗАО "ИК "РИКОМ-ТРАСТ"
Алексей Морсов
ICQ: 196766290
Jabber: Samurai@jabber.pibhe.com
http://www.ricom.ru
http://www.fondmarket.ru
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Comm] ошибка при комплияции matplotlib
2005-05-27 11:26 [Comm] ошибка при комплияции matplotlib Alexey Morsov
@ 2005-05-27 11:29 ` Michael Isachenkov
2005-05-27 12:29 ` Alexey Morsov
2005-05-27 11:32 ` Anton Gorlov
1 sibling, 1 reply; 9+ messages in thread
From: Michael Isachenkov @ 2005-05-27 11:29 UTC (permalink / raw)
To: community
> ...
> building 'matplotlib._agg' extension
> creating build/temp.linux-i686-2.3
> creating build/temp.linux-i686-2.3/src
> creating build/temp.linux-i686-2.3/agg22
> creating build/temp.linux-i686-2.3/agg22/src
> i586-alt-linux-gcc -pthread -fno-strict-aliasing -DNDEBUG -pipe -Wall
> -O2 -march=i586 -mcpu=i686 -fPIC -DPIC -D_GNU_SOURCE -fPIC
> -Iagg22/include -Isrc -Iswig -I/usr/include/python2.3 -c
> agg22/src/agg_trans_affine.cpp -o
> build/temp.linux-i686-2.3/agg22/src/agg_trans_affine.o
> i586-alt-linux-gcc: installation problem, cannot exec `cc1plus': No such
> file or directory
> error: command 'i586-alt-linux-gcc' failed with exit status 1
>
> Что именно ему не хватает?
gccX.X-c++ той версии, которой собираете то, что собираете.
--
Best regards, Michael Isachenkov
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Comm] ошибка при комплияции matplotlib
2005-05-27 11:26 [Comm] ошибка при комплияции matplotlib Alexey Morsov
2005-05-27 11:29 ` Michael Isachenkov
@ 2005-05-27 11:32 ` Anton Gorlov
2005-05-27 12:01 ` [Comm] ошибка при компл ияции matplotlib Michael Holzman
1 sibling, 1 reply; 9+ messages in thread
From: Anton Gorlov @ 2005-05-27 11:32 UTC (permalink / raw)
To: community
Здравствуйте, Alexey.
Вы писали 27 мая 2005 г., 15:26:36:
> i586-alt-linux-gcc: installation problem, cannot exec `cc1plus': No such
> file or directory
> error: command 'i586-alt-linux-gcc' failed with exit status 1
> Что именно ему не хватает?
похоже ему нужно нечто по имени cc1plus.
Что это не подскажу.. попробуйте apt-cache search cc1plus
--
С уважением,
Anton mailto:Pnz.Stalker@mail.ru
FIDO: 2:5059/37
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Comm] ошибка при компл ияции matplotlib
2005-05-27 11:32 ` Anton Gorlov
@ 2005-05-27 12:01 ` Michael Holzman
2005-05-27 12:13 ` Re[2]: " Anton Gorlov
0 siblings, 1 reply; 9+ messages in thread
From: Michael Holzman @ 2005-05-27 12:01 UTC (permalink / raw)
To: community
On 5/27/05, Anton Gorlov <Pnz.Stalker@mail.ru> wrote:
> > i586-alt-linux-gcc: installation problem, cannot exec `cc1plus': No such
> > file or directory
> > error: command 'i586-alt-linux-gcc' failed with exit status 1
> > Что именно ему не хватает?
> похоже ему нужно нечто по имени cc1plus.
> Что это не подскажу.. попробуйте apt-cache search cc1plus
У меня это выглядит вот так:
# rpm -ql gcc3.2-c++-3.2.3-alt3 | grep cc1plus
/usr/lib/gcc-lib/i586-alt-linux/3.2.3/cc1plus
Если я правильно понимаю, это С/С++ препроцессор.
--
Regards,
Michael Holzman
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re[2]: [Comm] ошибка при компл ияции matplotlib
2005-05-27 12:01 ` [Comm] ошибка при компл ияции matplotlib Michael Holzman
@ 2005-05-27 12:13 ` Anton Gorlov
0 siblings, 0 replies; 9+ messages in thread
From: Anton Gorlov @ 2005-05-27 12:13 UTC (permalink / raw)
To: community
Здравствуйте, Michael.
Вы писали 27 мая 2005 г., 16:01:46:
>> > i586-alt-linux-gcc: installation problem, cannot exec `cc1plus': No such
>> > file or directory
>> > error: command 'i586-alt-linux-gcc' failed with exit status 1
>> > Что именно ему не хватает?
>> похоже ему нужно нечто по имени cc1plus.
>> Что это не подскажу.. попробуйте apt-cache search cc1plus
> У меня это выглядит вот так:
> # rpm -ql gcc3.2-c++-3.2.3-alt3 | grep cc1plus
> /usr/lib/gcc-lib/i586-alt-linux/3.2.3/cc1plus
> Если я правильно понимаю, это С/С++ препроцессор.
ага.
--
С уважением,
Anton mailto:Pnz.Stalker@mail.ru
FIDO: 2:5059/37
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Comm] ошибка при комплияции matplotlib
2005-05-27 11:29 ` Michael Isachenkov
@ 2005-05-27 12:29 ` Alexey Morsov
2005-05-27 12:35 ` Michael Isachenkov
2005-05-27 12:41 ` Alexey Rusakov
0 siblings, 2 replies; 9+ messages in thread
From: Alexey Morsov @ 2005-05-27 12:29 UTC (permalink / raw)
To: community
Michael Isachenkov wrote:
>
> gccX.X-c++ той версии, которой собираете то, что собираете.
Е..... теперь вообще
In file included from src/_nc_backend_agg.cpp:17:
src/ft2font.h:37: error: syntax error before `&' token
src/ft2font.h:43: error: syntax error before `&' token
src/ft2font.h:84: error: 'FT_Face' is used as a type, but is not defined
as a type.
src/ft2font.h:85: error: 'FT_Matrix' is used as a type, but is not
defined as a type.
src/ft2font.h:86: error: 'FT_Vector' is used as a type, but is not
defined as a type.
src/ft2font.h:87: error: 'FT_Error' is used as a type, but is not
defined as a type.
src/ft2font.h:88: error: `FT_Glyph' was not declared in this scope
src/ft2font.h:88: error: template argument 1 is invalid
src/ft2font.h:88: error: template argument 2 is invalid
src/ft2font.h:88: error: ISO C++ forbids declaration of `glyphs' with no
type
src/ft2font.h:89: error: `FT_Vector' was not declared in this scope
src/ft2font.h:89: error: template argument 1 is invalid
src/ft2font.h:89: error: template argument 2 is invalid
src/ft2font.h:89: error: ISO C++ forbids declaration of `pos' with no type
src/ft2font.h:95: error: syntax error before `)' token
src/ft2font.h:96: error: `FT_Bitmap' was not declared in this scope
src/ft2font.h:96: error: `bitmap' was not declared in this scope
src/ft2font.h:96: error: `FT_Int' was not declared in this scope
src/ft2font.h:96: error: syntax error before `,' token
Это уже к аффтару?
--
Всего наилучшего,
Системный Администратор ЗАО "ИК "РИКОМ-ТРАСТ"
Алексей Морсов
ICQ: 196766290
Jabber: Samurai@jabber.pibhe.com
http://www.ricom.ru
http://www.fondmarket.ru
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Comm] ошибка при комплияции matplotlib
2005-05-27 12:29 ` Alexey Morsov
@ 2005-05-27 12:35 ` Michael Isachenkov
2005-05-27 12:41 ` Alexey Rusakov
1 sibling, 0 replies; 9+ messages in thread
From: Michael Isachenkov @ 2005-05-27 12:35 UTC (permalink / raw)
To: community
> Это уже к аффтару?
Или попробовать другой gcc...
--
Best regards, Michael Isachenkov
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Comm] ошибка при комплияции matplotlib
2005-05-27 12:29 ` Alexey Morsov
2005-05-27 12:35 ` Michael Isachenkov
@ 2005-05-27 12:41 ` Alexey Rusakov
2005-05-27 14:58 ` Alexey Morsov
1 sibling, 1 reply; 9+ messages in thread
From: Alexey Rusakov @ 2005-05-27 12:41 UTC (permalink / raw)
To: community
On 27.05.2005 16:29, Alexey Morsov wrote:
>
> Michael Isachenkov wrote:
>
>>
>> gccX.X-c++ той версии, которой собираете то, что собираете.
> Е..... теперь вообще
> In file included from src/_nc_backend_agg.cpp:17:
> src/ft2font.h:37: error: syntax error before `&' token
> src/ft2font.h:43: error: syntax error before `&' token
> src/ft2font.h:84: error: 'FT_Face' is used as a type, but is not defined
> as a type.
> src/ft2font.h:85: error: 'FT_Matrix' is used as a type, but is not
> defined as a type.
> src/ft2font.h:86: error: 'FT_Vector' is used as a type, but is not
> defined as a type.
> src/ft2font.h:87: error: 'FT_Error' is used as a type, but is not
> defined as a type.
> src/ft2font.h:88: error: `FT_Glyph' was not declared in this scope
> src/ft2font.h:88: error: template argument 1 is invalid
> src/ft2font.h:88: error: template argument 2 is invalid
> src/ft2font.h:88: error: ISO C++ forbids declaration of `glyphs' with no
> type
> src/ft2font.h:89: error: `FT_Vector' was not declared in this scope
> src/ft2font.h:89: error: template argument 1 is invalid
> src/ft2font.h:89: error: template argument 2 is invalid
> src/ft2font.h:89: error: ISO C++ forbids declaration of `pos' with no type
> src/ft2font.h:95: error: syntax error before `)' token
> src/ft2font.h:96: error: `FT_Bitmap' was not declared in this scope
> src/ft2font.h:96: error: `bitmap' was not declared in this scope
> src/ft2font.h:96: error: `FT_Int' was not declared in this scope
> src/ft2font.h:96: error: syntax error before `,' token
>
> Это уже к аффтару?
Могут не сходиться версии использумых заголовочных файлов с тем, что
требуется. Может в исходниках быть пропущено включение какого-то файла.
Покажите эту 37-строку в src/ft2font.h, возможно, станет яснее.
--
Alexey "Ktirf" Rusakov
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Comm] ошибка при комплияции matplotlib
2005-05-27 12:41 ` Alexey Rusakov
@ 2005-05-27 14:58 ` Alexey Morsov
0 siblings, 0 replies; 9+ messages in thread
From: Alexey Morsov @ 2005-05-27 14:58 UTC (permalink / raw)
To: community
Alexey Rusakov wrote:
> Могут не сходиться версии использумых заголовочных файлов с тем, что
> требуется. Может в исходниках быть пропущено включение какого-то файла.
> Покажите эту 37-строку в src/ft2font.h, возможно, станет яснее.
class Glyph : public Py::PythonExtension<Glyph> {
public:
Glyph( const FT_Face&, const FT_Glyph&, size_t);
^^^^^^^^^^^^^^^^^^^^^^ 37-ая
Мне это ничего не гвоорит :( Не силен я в cpp тем более в связке с Питоном
--
Всего наилучшего,
Системный Администратор ЗАО "ИК "РИКОМ-ТРАСТ"
Алексей Морсов
ICQ: 196766290
Jabber: Samurai@jabber.pibhe.com
http://www.ricom.ru
http://www.fondmarket.ru
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2005-05-27 14:58 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-05-27 11:26 [Comm] ошибка при комплияции matplotlib Alexey Morsov
2005-05-27 11:29 ` Michael Isachenkov
2005-05-27 12:29 ` Alexey Morsov
2005-05-27 12:35 ` Michael Isachenkov
2005-05-27 12:41 ` Alexey Rusakov
2005-05-27 14:58 ` Alexey Morsov
2005-05-27 11:32 ` Anton Gorlov
2005-05-27 12:01 ` [Comm] ошибка при компл ияции matplotlib Michael Holzman
2005-05-27 12:13 ` Re[2]: " Anton Gorlov
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git