[Comm] bcm44x + ALM2.4

[Comm] bcm44x + ALM2.4

[georginus]

Здравствуйте, все.

Имеется сетевая карта Asustek на broadcom 440.
Никак не получается заставить ее работать на АЛМ 2.4 + Сизиф :(
при запуске drakconf данного драйвера нет в списке, хотя в
/lib/modules/kernel/2.4.26-std-up/drivers файл драйвера присутствует.
Прошу помощи в настройке сабжа.

Заранее спасибо.

-- 
С уважением,
 georginus                          mailto:georginus@galaktika.by

[Comm] Re: bcm44x + ALM2.4

[Michael Shigorin]

On Mon, Jan 10, 2005 at 05:39:44PM +0200, georginus wrote:
> Прошу помощи в настройке сабжа.

modprobe tg3

-- 
 ---- WBR, Michael Shigorin <mike@altlinux.ru>
  ------ Linux.Kiev http://www.linux.kiev.ua/

Re: [Comm] Re: bcm44x + ALM2.4

[georginus]

Здравствуйте, Michael.

Вы писали 10 января 2005 г., 21:06:34:

> On Mon, Jan 10, 2005 at 05:39:44PM +0200, georginus wrote:
>> Прошу помощи в настройке сабжа.

> modprobe tg3


[root@localhost root]# modprobe tg3
/lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
/lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: insmod /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o failed
/lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: insmod tg3 failed
[root@localhost root]# 


-- 
С уважением,
 georginus                          mailto:georginus@galaktika.by

Re: [Comm] Re: bcm44x + ALM2.4

[Valery V. Inozemtsev]

[-- Attachment #1: Type: text/plain, Size: 936 bytes --]

В сообщении от 11 Январь 2005 10:40 georginus написал(a):
> Здравствуйте, Michael.
>
> Вы писали 10 января 2005 г., 21:06:34:
> > On Mon, Jan 10, 2005 at 05:39:44PM +0200, georginus wrote:
> >> Прошу помощи в настройке сабжа.
> >
> > modprobe tg3
>
> [root@localhost root]# modprobe tg3
> /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: init_module: No
> such device Hint: insmod errors can be caused by incorrect module
> parameters, including invalid IO or IRQ parameters. You may find more
> information in syslog or the output from dmesg
> /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: insmod
> /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o failed
> /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: insmod tg3 failed
> [root@localhost root]#

modprobe b44

-- 
Valery V. Inozemtsev

Powered by ALT Linux Sisyphus (20041230)
ftp://ftp.altlinux.ru/pub/people/shrek/

[-- Attachment #2: Type: application/pgp-signature, Size: 190 bytes --]

Re[2]: [Comm] Re: bcm44x + ALM2.4

[georginus]

Здравствуйте, Valery.

Вы писали 11 января 2005 г., 11:25:24:

> В сообщении от 11 Январь 2005 10:40 georginus написал(a):
>> Здравствуйте, Michael.
>>
>> Вы писали 10 января 2005 г., 21:06:34:
>> > On Mon, Jan 10, 2005 at 05:39:44PM +0200, georginus wrote:
>> >> Прошу помощи в настройке сабжа.
>> >
>> > modprobe tg3
>>
>> [root@localhost root]# modprobe tg3
>> /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: init_module: No
>> such device Hint: insmod errors can be caused by incorrect module
>> parameters, including invalid IO or IRQ parameters. You may find more
>> information in syslog or the output from dmesg
>> /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: insmod
>> /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o failed
>> /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: insmod tg3 failed
>> [root@localhost root]#

> modprobe b44

это проходит нормально, по lsmod b44 есть, но сеть все равно не
работает. может нужно какие-нибудь конфиги ручками поправить?

-- 
С уважением,
 georginus                          mailto:georginus@galaktika.by

Re: [Comm] Re: bcm44x + ALM2.4

[Valery V. Inozemtsev]

[-- Attachment #1: Type: text/plain, Size: 1264 bytes --]

В сообщении от 11 Январь 2005 12:32 georginus написал(a):
> Здравствуйте, Valery.
>
> Вы писали 11 января 2005 г., 11:25:24:
> > В сообщении от 11 Январь 2005 10:40 georginus написал(a):
> >> Здравствуйте, Michael.
> >>
> >> Вы писали 10 января 2005 г., 21:06:34:
> >> > On Mon, Jan 10, 2005 at 05:39:44PM +0200, georginus wrote:
> >> >> Прошу помощи в настройке сабжа.
> >> >
> >> > modprobe tg3
> >>
> >> [root@localhost root]# modprobe tg3
> >> /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: init_module:
> >> No such device Hint: insmod errors can be caused by incorrect module
> >> parameters, including invalid IO or IRQ parameters. You may find more
> >> information in syslog or the output from dmesg
> >> /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: insmod
> >> /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o failed
> >> /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: insmod tg3
> >> failed [root@localhost root]#
> >
> > modprobe b44
>
> это проходит нормально, по lsmod b44 есть, но сеть все равно не
> работает. может нужно какие-нибудь конфиги ручками поправить?

/etc/modules.conf

alias eth0 b44

-- 
Valery V. Inozemtsev

Powered by ALT Linux Sisyphus (20041230)
ftp://ftp.altlinux.ru/pub/people/shrek/

[-- Attachment #2: Type: application/pgp-signature, Size: 190 bytes --]

Re[2]: [Comm] Re: bcm44x + ALM2.4

[georginus]

Здравствуйте, Valery.

Вы писали 11 января 2005 г., 11:35:27:

> В сообщении от 11 Январь 2005 12:32 georginus написал(a):
>> Здравствуйте, Valery.
>>
>> Вы писали 11 января 2005 г., 11:25:24:
>> > В сообщении от 11 Январь 2005 10:40 georginus написал(a):
>> >> Здравствуйте, Michael.
>> >>
>> >> Вы писали 10 января 2005 г., 21:06:34:
>> >> > On Mon, Jan 10, 2005 at 05:39:44PM +0200, georginus wrote:
>> >> >> Прошу помощи в настройке сабжа.
>> >> >
>> >> > modprobe tg3
>> >>
>> >> [root@localhost root]# modprobe tg3
>> >> /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: init_module:
>> >> No such device Hint: insmod errors can be caused by incorrect module
>> >> parameters, including invalid IO or IRQ parameters. You may find more
>> >> information in syslog or the output from dmesg
>> >> /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: insmod
>> >> /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o failed
>> >> /lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: insmod tg3
>> >> failed [root@localhost root]#
>> >
>> > modprobe b44
>>
>> это проходит нормально, по lsmod b44 есть, но сеть все равно не
>> работает. может нужно какие-нибудь конфиги ручками поправить?

> /etc/modules.conf

> alias eth0 b44

прописано

-- 
С уважением,
 georginus                          mailto:georginus@galaktika.by

Re: [Comm] Re: bcm44x + ALM2.4

[Valery V. Inozemtsev]

[-- Attachment #1: Type: text/plain, Size: 415 bytes --]

В сообщении от 11 Январь 2005 12:36 georginus написал(a):
<skip>
> >> >
> >> > modprobe b44
> >>
> >> это проходит нормально, по lsmod b44 есть, но сеть все равно не
> >> работает. может нужно какие-нибудь конфиги ручками поправить?
> >
> > /etc/modules.conf
> >
> > alias eth0 b44
>
> прописано

depmod -a

-- 
Valery V. Inozemtsev

Powered by ALT Linux Sisyphus (20041230)
ftp://ftp.altlinux.ru/pub/people/shrek/

[-- Attachment #2: Type: application/pgp-signature, Size: 190 bytes --]

Re[2]: [Comm] Re: bcm44x + ALM2.4

[georginus]

>> > /etc/modules.conf
>> >
>> > alias eth0 b44
>>
>> прописано

> depmod -a

делал

вот вывод dmesg:

--
[root@localhost root]# dmesg
: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: bfebfbff 00000000 00000000 00000000
CPU:             Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1800.1107 MHz.
..... host bus clock speed is 100.0060 MHz.
cpu: 0, clocks: 1000060, slice: 500030
CPU0<T0:1000048,T1:500016,D:2,S:500030,C:1000060>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20040326
PCI: PCI BIOS revision 2.10 entry at 0xf10f0, last bus=1
PCI: Using configuration type 1
Looking for DSDT in initrd ... not found!
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S3 S4 S5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
PCI: Probing PCI hardware
00:00:02[A] -> 2-16 -> IRQ 16 level low
00:00:02[B] -> 2-17 -> IRQ 17 level low
00:00:02[C] -> 2-18 -> IRQ 18 level low
00:00:02[D] -> 2-19 -> IRQ 19 level low
00:00:03[B] -> 2-21 -> IRQ 21 level low
00:00:03[C] -> 2-22 -> IRQ 22 level low
00:00:03[D] -> 2-23 -> IRQ 23 level low
number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00178080
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0080
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org
.... register #02: 02000000
.......     : arbitration: 02
.... register #03: 00000001
.......     : Boot DT    : 1
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 001 01  0    0    0   0   0    1    1    31
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 001 01  0    0    0   0   0    1    1    51
 06 001 01  0    0    0   0   0    1    1    59
 07 001 01  0    0    0   0   0    1    1    61
 08 001 01  0    0    0   0   0    1    1    69
 09 001 01  0    0    0   0   0    1    1    71
 0a 001 01  0    0    0   0   0    1    1    79
 0b 001 01  0    0    0   0   0    1    1    81
 0c 001 01  0    0    0   0   0    1    1    89
 0d 001 01  0    0    0   0   0    1    1    91
 0e 001 01  0    0    0   0   0    1    1    99
 0f 001 01  0    0    0   0   0    1    1    A1
 10 001 01  1    1    0   1   0    1    1    B1
 11 001 01  1    1    0   1   0    1    1    B9
 12 001 01  1    1    0   1   0    1    1    C1
 13 001 01  1    1    0   1   0    1    1    C9
 14 001 01  0    1    0   1   0    1    1    A9
 15 001 01  1    1    0   1   0    1    1    D1
 16 001 01  1    1    0   1   0    1    1    D9
 17 001 01  1    1    0   1   0    1    1    E1
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
PCI: Using ACPI for IRQ routing
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
kinoded started
VFS: Disk quotas vdquot_6.5.1
vesafb: framebuffer at 0xe8000000, mapped to 0xde80a000, size 3072k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: protected mode interface info at cbbb:000c
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (1024x768, 53283 bytes, v2).
Console: switching to colour frame buffer device 106x34
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
    ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA MK2018GAP, ATA DISK drive
blk: queue c03039e0, I/O limit 4095Mb (mask 0xffffffff)
hdc: QSI CD-ROM SCR-242, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 39070080 sectors (20004 MB), CHS=2432/255/63, UDMA(100)
Partition check:
 hda: hda1 < hda5 hda6 hda7 hda8 > hda2
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 152k freed
VFS: Mounted root (romfs filesystem) readonly.
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 136k freed
Executing init=/sbin/init
Adding Swap: 297160k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
Real Time Clock Driver v1.10f
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 409M
agpgart: Detected SiS 650 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
ACPI: Battery Slot [BAT0] (battery absent)
ACPI: AC Adapter [AC] (on-line)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
b44.c:v0.92 (Nov 4, 2003)
divert: allocating divert_blk for eth0
eth0: Broadcom 4400 10/100BaseT Ethernet 00:0c:6e:c9:47:5c
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
MSDOS FS: IO charset cp1251
MSDOS FS: Using codepage 866
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xdebbe000, IRQ 20
usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [SiS] USB 1.0 Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-ohci.c: USB OHCI at membase 0xdebc0000, IRQ 21
usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-ohci.c: USB OHCI at membase 0xdebc2000, IRQ 22
usb-ohci.c: usb-00:03.2, Silicon Integrated Systems [SiS] USB 1.0 Controller (#3)
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
ehci_hcd 00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
ehci_hcd 00:03.3: irq 23, pci mem debca000
usb.c: new USB bus registered, assigned bus number 4
PCI: cache line size of 128 is not supported by device 00:03.3
ehci_hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 6 ports detected
usb.c: USB disconnect on device 00:03.0-0 address 1
usb.c: USB bus 1 deregistered
usb.c: USB disconnect on device 00:03.1-0 address 1
usb.c: USB bus 2 deregistered
usb.c: USB disconnect on device 00:03.2-0 address 1
usb.c: USB bus 3 deregistered
ehci_hcd 00:03.3: remove state 3
usb.c: USB disconnect on device 00:03.3-0 address 1
usb.c: USB bus 4 deregistered
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
inserting floppy driver for 2.4.26-std-up-alt6
APIC error on CPU0: 00(40)
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
floppy0: no floppy controllers found
inserting floppy driver for 2.4.26-std-up-alt6
floppy0: no floppy controllers found
inserting floppy driver for 2.4.26-std-up-alt6
floppy0: no floppy controllers found
inserting floppy driver for 2.4.26-std-up-alt6
floppy0: no floppy controllers found
inserting floppy driver for 2.4.26-std-up-alt6
floppy0: no floppy controllers found
inserting floppy driver for 2.4.26-std-up-alt6
floppy0: no floppy controllers found
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
Yenta ISA IRQ mask 0x0080, PCI irq 16
Socket status: 30000006
divert: not allocating divert_blk for non-ethernet device irlan0
BlueZ Core ver 2.3 Copyright (C) 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
BlueZ L2CAP ver 2.3 Copyright (C) 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
BlueZ RFCOMM ver 1.1
Copyright (C) 2002 Maxim Krasnyansky <maxk@qualcomm.com>
Copyright (C) 2002 Marcel Holtmann <marcel@holtmann.org>
Intel 810 + AC97 Audio, version 0.24, 21:57:24 Aug  3 2004
i810: SiS 7012 found at IO 0x9000 and 0x9400, MEM 0x0000 and 0x0000, IRQ 18
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97 Audio codec, id: ALG32 (ALC650)
i810_audio: AC'97 codec 0, new EID value = 0x05c7
i810_audio: AC'97 codec 0, DAC map configured, total channels = 6
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
ehci_hcd 00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
ehci_hcd 00:03.3: irq 23, pci mem dec15000
usb.c: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 00:03.3
ehci_hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 6 ports detected
usb-ohci.c: USB OHCI at membase 0xdec1d000, IRQ 20
usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [SiS] USB 1.0 Controller
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-ohci.c: USB OHCI at membase 0xdec1f000, IRQ 21
usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-ohci.c: USB OHCI at membase 0xdec21000, IRQ 22
usb-ohci.c: usb-00:03.2, Silicon Integrated Systems [SiS] USB 1.0 Controller (#3)
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: new USB device 00:03.3-4, assigned address 2
usb.c: USB device 2 (vend/prod 0x67b/0x2507) is not claimed by any active driver.
hub.c: new USB device 00:03.1-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x46d/0xc016) is not claimed by any active driver.
usb.c: registered new driver hiddev
usb.c: registered new driver hid
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb3:2.0
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
SCSI subsystem driver Revision: 1.00
mice: PS/2 mouse device common for all mice
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi0 : SCSI emulation for USB Mass Storage devices
  Vendor: SAMSUNG   Model: MP0804H           Rev: UE10
  Type:   Direct-Access                      ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
USB Mass Storage support registered.
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 156368017 512-byte hdwr sectors (80060 MB)
 sda: sda1 sda2 sda3
inserting floppy driver for 2.4.26-std-up-alt6
floppy0: no floppy controllers found
hdc: attached ide-cdrom driver.
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Looking for splash picture.... found (1024x768, 12752 bytes, v2).
Splash status on console 0 changed to on
Looking for splash picture.... found (1024x768, 12752 bytes, v2).
Splash status on console 1 changed to on
Looking for splash picture.... found (1024x768, 12752 bytes, v2).
Splash status on console 2 changed to on
Looking for splash picture.... found (1024x768, 12752 bytes, v2).
Splash status on console 3 changed to on
Looking for splash picture.... found (1024x768, 12752 bytes, v2).
Splash status on console 4 changed to on
Looking for splash picture.... found (1024x768, 12752 bytes, v2).
Splash status on console 5 changed to on
Looking for splash picture.... found (1024x768, 12752 bytes, v2).
Splash status on console 6 changed to on
Looking for splash picture.... found (1024x768, 12752 bytes, v2).
Splash status on console 7 changed to on
Looking for splash picture.... found (1024x768, 12752 bytes, v2).
Splash status on console 8 changed to on
Looking for splash picture.... found (1024x768, 12752 bytes, v2).
Splash status on console 9 changed to on
Looking for splash picture.... found (1024x768, 12752 bytes, v2).
Splash status on console 10 changed to on
Looking for splash picture.... found (1024x768, 12752 bytes, v2).
Splash status on console 11 changed to on
[root@localhost root]#
-----

-- 
С уважением,
 georginus                          mailto:georginus@galaktika.by

Re: [Comm] Re: bcm44x + ALM2.4

[Valery V. Inozemtsev]

[-- Attachment #1: Type: text/plain, Size: 591 bytes --]

В сообщении от 11 Январь 2005 12:47 georginus написал(a):
> >> > /etc/modules.conf
> >> >
> >> > alias eth0 b44
> >>
> >> прописано
> >
> > depmod -a
>
> делал
>
> вот вывод dmesg:
>
> --
> [root@localhost root]# dmesg
>
<skip>
> ACPI: Processor [CPU1] (supports C1)
> b44.c:v0.92 (Nov 4, 2003)
> divert: allocating divert_blk for eth0
> eth0: Broadcom 4400 10/100BaseT Ethernet 00:0c:6e:c9:47:5c

ну с драйвером все нормально.
/etc/sysconfig/network-scripts/ifcfg-eth0 есть?

<skip>
-- 
Valery V. Inozemtsev

Powered by ALT Linux Sisyphus (20050104)
ftp://ftp.altlinux.ru/pub/people/shrek/

[-- Attachment #2: Type: application/pgp-signature, Size: 190 bytes --]

Re[2]: [Comm] Re: bcm44x + ALM2.4

[georginus]

Здравствуйте, Valery.

Вы писали 11 января 2005 г., 11:58:36:

> В сообщении от 11 Январь 2005 12:47 georginus написал(a):
>> >> > /etc/modules.conf
>> >> >
>> >> > alias eth0 b44
>> >>
>> >> прописано
>> >
>> > depmod -a
>>
>> делал
>>
>> вот вывод dmesg:
>>
>> --
>> [root@localhost root]# dmesg
>>
> <skip>
>> ACPI: Processor [CPU1] (supports C1)
>> b44.c:v0.92 (Nov 4, 2003)
>> divert: allocating divert_blk for eth0
>> eth0: Broadcom 4400 10/100BaseT Ethernet 00:0c:6e:c9:47:5c

> ну с драйвером все нормально.
> /etc/sysconfig/network-scripts/ifcfg-eth0 есть?

нет, файла с таким именем нет. есть ifcfg-lo и
ifcfg-irlan0 :)


-- 
С уважением,
 georginus                          mailto:georginus@galaktika.by

Re: [Comm] Re: bcm44x + ALM2.4

[Genix]

georginus пишет:

>>ну с драйвером все нормально.
>>/etc/sysconfig/network-scripts/ifcfg-eth0 есть?
>>    
>>
>
>нет, файла с таким именем нет. есть ifcfg-lo и
>ifcfg-irlan0 :)
>  
>

ну так создайте его, и пропишите туда что-то типа
DEVICE=eth0
BOOTPROTO=static
IPADDR=_your.ip_
NETMASK=255.255.255.0
GATEWAY=_gw_
ONBOOT=yes

-- 
У каждого в башке свои тараканы...

Re[2]: [Comm] Re: bcm44x + ALM2.4

[georginus]

Создал нечто подобное ifcfg-eth0, все получилось, сеть заработала, только
осталось с lisa'ой разобраться... :)

Всем спасибо за помощь, вы мне очень помогли! :DRINK:

Тема закрыта :)

-- 
С уважением,
 georginus                          mailto:georginus@galaktika.by

[Comm] Re: bcm44x + ALM2.4

[Michael Shigorin]

On Tue, Jan 11, 2005 at 03:02:53PM +0200, georginus wrote:
> Создал нечто подобное ifcfg-eth0, все получилось, сеть
> заработала, только осталось с lisa'ой разобраться... :)

А чего с ней разбираться -- пристрелить и всех делов.

-- 
 ---- WBR, Michael Shigorin <mike@altlinux.ru>
  ------ Linux.Kiev http://www.linux.kiev.ua/

Re: [Comm] Re: bcm44x + ALM2.4

[Sasha Martsinuk]

georginus wrote:

>>>>>>modprobe tg3
>>>>>
>>>>>[root@localhost root]# modprobe tg3
>>>>>/lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: init_module:
>>>>>No such device Hint: insmod errors can be caused by incorrect module
>>>>>parameters, including invalid IO or IRQ parameters. You may find more
>>>>>information in syslog or the output from dmesg
>>>>>/lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: insmod
>>>>>/lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o failed
>>>>>/lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: insmod tg3
>>>>>failed [root@localhost root]#
>>>>
>>>>modprobe b44
>>>
>>>это проходит нормально, по lsmod b44 есть, но сеть все равно не
>>>работает. может нужно какие-нибудь конфиги ручками поправить?

>>/etc/modules.conf
>>alias eth0 b44

> прописано

А теперь надо настроить eth0 в /etc/sysconfig/network-scripts/ifcfg-eth0
или /etc/net

--
WBR,
Sasha aka mr.Scamp
			    mailto:sasha@sasha.rv.ua

Re[2]: [Comm] Re: bcm44x + ALM2.4

[georginus]

Здравствуйте, Sasha.

Вы писали 11 января 2005 г., 11:44:59:

> georginus wrote:

>>>>>>>modprobe tg3
>>>>>>
>>>>>>[root@localhost root]# modprobe tg3
>>>>>>/lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: init_module:
>>>>>>No such device Hint: insmod errors can be caused by incorrect module
>>>>>>parameters, including invalid IO or IRQ parameters. You may find more
>>>>>>information in syslog or the output from dmesg
>>>>>>/lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: insmod
>>>>>>/lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o failed
>>>>>>/lib/modules/2.4.26-std-up-alt6/kernel/drivers/net/tg3.o: insmod tg3
>>>>>>failed [root@localhost root]#
>>>>>
>>>>>modprobe b44
>>>>
>>>>это проходит нормально, по lsmod b44 есть, но сеть все равно не
>>>>работает. может нужно какие-нибудь конфиги ручками поправить?

>>>/etc/modules.conf
>>>alias eth0 b44

>> прописано

> А теперь надо настроить eth0 в
> /etc/sysconfig/network-scripts/ifcfg-eth0
> или /etc/net

сам смогу догадаться или без помощи никак?

-- 
С уважением,
 georginus                          mailto:georginus@galaktika.by