* [Comm] апгрейд до ALM 2.4
@ 2004-11-13 4:13 Andrei Lomov
2004-11-13 10:58 ` [Comm] " Michael Shigorin
0 siblings, 1 reply; 3+ messages in thread
From: Andrei Lomov @ 2004-11-13 4:13 UTC (permalink / raw)
To: community
Проделал апгерйд Сизифа 20040607 до ALM 2.4
(apt-get upgrade)
Все очень даже неплохо.
Не все пакеты обновились автоматом.
В связи с этим вопросы:
1) какой пакет установить, чтобы обновить картинку lilo
и прочую "красоту" при загрузке
2) как обновить ядро до 2426
3) как правильно добавить ядро 268
Установил apt'ом два пакета образов ядер 2426 и 268,
в лило все прописалось,
но теперь при загрузке фатальные проблемы
с видеокартой nvidia, на всех ядрах, и на старом тоже.
$ rpm -qa | grep kernel
kernel-build-tools-0.7-alt1
kernel-doc-std-2.4.26-alt6
kernel-headers-common-1.1.5-alt1
kernel-headers-modules-std-up-2.4.26-alt6
kernel-headers-std-up-2.4.26-alt6
kernel-image-std-up-2.4.22-alt17
kernel-image-std-up-2.4.26-alt2
kernel-image-std-up-2.4.26-alt6
kernel-image-std26-up-2.6.8-alt9
kernel-modules-3c90x-std-up-1.0.2-alt9.17
kernel-modules-alsa-std-up-1.0.2c-alt1.17
kernel-modules-bcm5700-std-up-6.2.11-alt12.17
kernel-modules-cifs-std-up-0.9.3-alt3.17
kernel-modules-drm-std-up-4.3.0-alt21.17
kernel-modules-fglrx-std-up-1.0.3.7.0-alt1.17
kernel-modules-hcfpcimodem-std-up-0.99mbsibeta02123100-alt3.17
kernel-modules-hostap-std-up-0.1.2-alt3.17
kernel-modules-lm_sensors-std-up-2.8.3-alt1.17
kernel-modules-madwifi-std-up-0.8.3.2-alt8.17
kernel-modules-nvidia-std-up-1.0.4496-alt2.2
kernel-modules-slicoss-std-up-1.2.0-alt5.17
kernel-modules-slmdm-data-2.7.10-alt1
kernel-modules-slmdm-std-up-2.7.10-alt16.17
kernel-modules-v4l-std-up-2003.11.05-alt3.17
kernel-source-nvidia-4496-1.0.4496-alt2
Захотел откатиться назад, не вышло:
[root@main root]# apt-get remove kernel-image-std26-up-2.6.8-alt9
Reading Package Lists... Done
Building Dependency Tree... Done
E: Couldn't find package kernel-image-std26-up-2.6.8-alt9
[root@main root]# apt-get remove kernel-image-std26-up-2.6.8
Reading Package Lists... Done
Building Dependency Tree... Done
E: Couldn't find package kernel-image-std26-up-2.6.8
[root@main root]# apt-get remove kernel-image-std26-up-2.6.8-alt9.rpm
Reading Package Lists... Done
Building Dependency Tree... Done
E: Couldn't find package kernel-image-std26-up-2.6.8-alt9.rpm
--
Всего доброго
А.Л.
^ permalink raw reply [flat|nested] 3+ messages in thread
* [Comm] Re: апгрейд до ALM 2.4
2004-11-13 4:13 [Comm] апгрейд до ALM 2.4 Andrei Lomov
@ 2004-11-13 10:58 ` Michael Shigorin
2004-11-16 12:08 ` Nick S. Grechukh
0 siblings, 1 reply; 3+ messages in thread
From: Michael Shigorin @ 2004-11-13 10:58 UTC (permalink / raw)
To: community
On Sat, Nov 13, 2004 at 10:13:59AM +0600, Andrei Lomov wrote:
> Не все пакеты обновились автоматом. В связи с этим вопросы:
> 1) какой пакет установить, чтобы обновить картинку lilo
> и прочую "красоту" при загрузке
Кажется, design-bootsplash-Master нужен.
> 2) как обновить ядро до 2426
Руками -- ядро поставлено на Hold и включено в Allow-Duplicates в
/etc/apt/apt.conf, посему автоматом не обновляется.
Я на тех системах, где риск неподъёма нового ядра некритичен
(есть CD и система локальная) подчас комментирую Hold и говорю
upgrade, после чего главное не отвлечься и вернуть Hold на место,
чтоб не было сюрпризов (проверено -- если несколько месяцев, так
с полгода, пожить на 2.4 _и_ 2.6 "во время перемен" при намеренно
снятом Hold, сюрпризов есть).
Если более критично -- rpm -ivh (не -U!) по пакетам или
apt-get install kernel-image-std-up#2.4.26-alt6 (и аналогично для
всех _нужных_ kernel-modules). Ну и после успешного переезда на
новое ядро старое можно снести, хотя опять же -- при прочих
равных иметь запасное ядрышко на машине обычно полезно, мало ли
как кэш при плохом выключении может в vmlinuz попасть.
> 3) как правильно добавить ядро 268
Аптом :-) apt-get install kernel-image-std26-up и модули.
> но теперь при загрузке фатальные проблемы
> с видеокартой nvidia, на всех ядрах, и на старом тоже.
> kernel-image-std-up-2.4.22-alt17
> kernel-image-std-up-2.4.26-alt2
> kernel-image-std-up-2.4.26-alt6
> kernel-image-std26-up-2.6.8-alt9
> kernel-modules-nvidia-std-up-1.0.4496-alt2.2
Дык. Надо kernel-modules-nvidia-std-up под те ядра, что
используете, добавить (и nvidia_glx_<версия> под них).
> [root@main root]# apt-get remove kernel-image-std26-up-2.6.8-alt9
> E: Couldn't find package kernel-image-std26-up-2.6.8-alt9
apt-get remove kernel-image-std26-up#2.6.8-alt9
--
---- WBR, Michael Shigorin <mike@altlinux.ru>
------ Linux.Kiev http://www.linux.kiev.ua/
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2004-11-16 12:08 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-11-13 4:13 [Comm] апгрейд до ALM 2.4 Andrei Lomov
2004-11-13 10:58 ` [Comm] " Michael Shigorin
2004-11-16 12:08 ` Nick S. Grechukh
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git