* [Comm] old russian pdf view? @ 2004-09-29 20:55 dm 2004-10-01 4:55 ` iLL 0 siblings, 1 reply; 3+ messages in thread From: dm @ 2004-09-29 20:55 UTC (permalink / raw) To: community Здравствуйте! Имеется некоторое количество текстов в формате PDF, сгенерённых из сканированных и распознанных оригиналов с помощью FineReader 5. Кто пользовался, знает, что там есть режим создания PDF-а, максимально близкого по виду к исходному тексту. Проблема в том, что эти PDF-ы при наличии в них русского текста нормально просматриваются исключительно в Adobe Acrobat Reader 3.0 for Windows. В Acrobat Reader 4.0 и старше, независимо от локализации, русский текст в них выводится исключительно английским шрифтом (вторая половина стандартной таблицы ASCII --- буквы с диактрикой, спецзнаки и прочая мура). В KGhostview шрифты частью такие же, частью вообще не выводятся. Соответственно, вопрос: может, кто-нибудь уже бодался с такими PDF-ами и знает способ их нормального просмотра из-под Linux или способ их преобразования во что-нибудь более правильное? -- ------------------------------------- dm <deadmustdie at pisem point net> ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Comm] old russian pdf view? 2004-09-29 20:55 [Comm] old russian pdf view? dm @ 2004-10-01 4:55 ` iLL 2004-10-03 15:06 ` dm 0 siblings, 1 reply; 3+ messages in thread From: iLL @ 2004-10-01 4:55 UTC (permalink / raw) To: community On Thu, 30 Sep 2004 00:55:37 +0400 dm <dead-mustdie@nm.ru> wrote: > Здравствуйте! > > Имеется некоторое количество текстов в формате PDF, сгенерённых из > сканированных и распознанных оригиналов с помощью FineReader 5. Кто > пользовался, знает, что там есть режим создания PDF-а, максимально > близкого по виду к исходному тексту. Проблема в том, что эти PDF-ы при > наличии в них русского текста нормально просматриваются исключительно в > Adobe Acrobat Reader 3.0 for Windows. В Acrobat Reader 4.0 и старше, > независимо от локализации, русский текст в них выводится исключительно > английским шрифтом (вторая половина стандартной таблицы ASCII --- буквы > с диактрикой, спецзнаки и прочая мура). В KGhostview шрифты частью > такие же, частью вообще не выводятся. > > Соответственно, вопрос: может, кто-нибудь уже бодался с такими PDF-ами и > знает способ их нормального просмотра из-под Linux или способ их > преобразования во что-нибудь более правильное? Тупое решение: В Акробате 3.0 распечатать, отсканировать, распознать нормалным Файнридерем и сохранить. Чуть умнее решение: Выгрузить в PS или во чтонибудь с открытым стандартом и покопаться в исходном тексте исправить кодировку. > > -- > ------------------------------------- > dm <deadmustdie at pisem point net> -- ===-iLya Bryzgalow aka iLL-=== _/ _/ _/ Astronomy_Linux_Krasnodar_Russia _/ _/ Linux User #301257 _/ _/ _/ ICQ:43835329 _/ _/ _/ JID://ill@jabber.org _/ _/ _/ http://www.krumn.oilnet.ru_/ _/ _/ ftp://ftp.krumn.oilnet.ru_/ _/_/_/ _/_/_/ i don't smoke and wish you the same! kernel-2.6.8-std26-smp-alt9 ALT Linux Sisyphus (20040921) ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Comm] old russian pdf view? 2004-10-01 4:55 ` iLL @ 2004-10-03 15:06 ` dm 0 siblings, 0 replies; 3+ messages in thread From: dm @ 2004-10-03 15:06 UTC (permalink / raw) To: community Здравствуйте, iLL! Пятница 01 Октябрь 2004 08:55, Вы писали: > > Имеется некоторое количество текстов в формате PDF, сгенерённых из > > сканированных и распознанных оригиналов с помощью FineReader 5. > > ... > > Соответственно, вопрос: может, кто-нибудь уже бодался с такими > > PDF-ами и знает способ их нормального просмотра из-под Linux или > > способ их преобразования во что-нибудь более правильное? > > Тупое решение: > В Акробате 3.0 распечатать, отсканировать, распознать нормалным > Файнридерем и сохранить. Ну Вы меня насмешили :-)) Вообще-то, если дело дойдёт до перераспознавания, я лучше достану сканы с архивного CD. А вот какой именно FineReader Вы считаете нормальным? (Интересует версия). У меня 5-й. Пробовал 6-й, он лучше в плане распознавания (да и то его улучшения для моих целей малосущественны, разве что распознавание над- и подстрочных индексов полезно), но именно в переводе в pdf никакой разницы с пятым нет. Чтобы сделать из-под FR нормальный pdf, нужно ставить в винду адобовские примочки и регистрировать в системе постскриптовские шрифты. Я как-то пробовал, чуть не помер. Сейчас у меня, естественно этих утилит нет. А pdf-ы, про которые речь, _уже сделаны_. То есть если их снова гонять через FR, это не только распознавание (работа машины), но и дикое количество ручного труда. Книги --- учебники и статьи с графиками, формулами и прочим. После первого распознавания в них приходится удалять нафиг весь текст и вручную править разметку. Иначе полная фигня получается. Повторять этот подвиг --- большое спасибо, желающих нет. > Чуть умнее решение: > Выгрузить в PS или во чтонибудь с открытым стандартом и покопаться в > исходном тексте исправить кодировку. Ну, это козе понятно. Собственно, именно про то, во что, чем, как выгружать, чем править кодировку и вставлять шрифты, я и хотел бы знать. Хотя бы намёк. Но увы... Тишина показывает, что осведомлённых нет, либо это страшная тайна. Придётся самому разбираться. А вообще, жаль. Я довольно давно уже из FR в pdf ничего не сохраняю, именно из-за этой дурной особенности файлов. Вместо этого применяется цепочка: сохранить в word, преобразовать word в tex, загрузить в LaTeX и получить pdf. Получается неплохо, но, во-первых, гораздо больше возни, во-вторых, оформление при этом всё-таки нарушается. Да и теряется основной смак, из-за которого FR-овские pdf-ы так хотелось бы использовать: FR умеет автоматически подставлять вместо плохо распознанных в оригинале букв их графическое представление. Но делает это только при экспорте в pdf. Такие пироги. С котятами. -- ------------------------------------- dm <deadmustdie at pisem point net> ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2004-10-03 15:06 UTC | newest] Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2004-09-29 20:55 [Comm] old russian pdf view? dm 2004-10-01 4:55 ` iLL 2004-10-03 15:06 ` dm
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git