* Re: [Comm] Анонимный доступ в samba
2004-09-23 9:01 ` Victor P. Vyatkin
@ 2004-09-23 12:49 ` Yury Aliaev
2004-09-23 13:09 ` Dmitriy Zakalyuzhniy
0 siblings, 1 reply; 12+ messages in thread
From: Yury Aliaev @ 2004-09-23 12:49 UTC (permalink / raw)
To: community
[-- Attachment #1: Type: text/plain, Size: 692 bytes --]
Victor P. Vyatkin пишет:
> Напимер так всем и все можно:
> [global]
> workgroup = GROUP
> security = share
>
> [public]
> path = /var/samba
> public = yes
> writable = yes
> directory mode = 755
>
> $ chmod 777 /var/samba
>
Дык и так и этак делал много раз... Сейчас присылаю свой
/etc/samba/smb.conf, прошу умных людей посмотреть и сказать, что здесь
не так, и как это нужно исправить.
P.S. Ситуация прежняя: имеются два "нормальных" пользователя Самбы
--,mutabor и sinich,-- и у них всё нормально: открывается и домашний
каталог, и общие (только на чтение). А вот остальных просто не пускает:
спрашивает пароль сразу при попытке зайти на машину.
С уважением, Юрий.
[-- Attachment #2: smb.conf --]
[-- Type: text/plain, Size: 19388 bytes --]
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#
#======================= Global Settings =====================================
[global]
# 1. Server Naming Options:
# workgroup = NT-Domain-Name or Workgroup-Name
workgroup = SUN
# netbios name is the name you will see in "Network Neighbourhood",
# but defaults to your hostname
; netbios name = <name_of_this_server>
# server string is the equivalent of the NT Description field
server string = Samba server on %h (v. %v)
# Message command is run by samba when a "popup" message is sent to it.
# The example below is for use with LinPopUp:
; message command = /usr/bin/linpopup "%f" "%m" %s; rm %s
# 2. Printing Options:
# CHANGES TO ENABLE PRINTING ON ALL CUPS PRINTERS IN THE NETWORK
# (as cups is now used in ALT Linux by default)
# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
; printcap name = cups
; load printers = yes
# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx, cups
; printing = cups
# Samba 3.0 supports the Windows NT-style point-and-print feature. To
# use this, you need to be able to upload print drivers to the samba
# server. The printer admins (or root) may install drivers onto samba.
# Note that this feature uses the print$ share, so you will need to
# enable it below.
# This parameter works like domain admin group:
# printer admin = @<group> <user>
; printer admin = @adm
# 3. Logging Options:
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Set the log (verbosity) level (0 <= log level <= 10)
; log level = 3
# 4. Security and Domain Membership Options:
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page. Do not enable this if (tcp/ip) name resolution does
# not work for all the hosts in your network.
; hosts allow = 192.168.1.
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
guest account = pcguest
# Security mode. Most people will want user level security. See
# security_level.txt for details.
# With winbind security should be 'user', 'domain' or 'ads' (for Active Directory)
# It is strongly recommended to run winbindd, even on PDC in order to
# optimize performance
# security = user
security = share
map to guest = bad user
idmap uid = 10000 - 15000
idmap gid = 10000 - 15000
# Active Directory support requires following options properly set up
# Please read ADS-related chapter in Samba HOWTO Collection before dealing with them!
; password server = <ads server name>
; realm = <FULLY.QUALIFIED.REALM.DOMAIN>
# Use password server option only with security = server or security = domain
# When using security = domain, you should use password server = *
; password server = <NT-Server-Name>
; password server = *
# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
; password level = 8
; username level = 8
# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
# Encrypted passwords are required for any use of samba in a Windows NT domain
# The smbpasswd file is only required by a server doing authentication, thus
# members of a domain do not need one.
# Please remember: ADS management *requires* passwords to be encrypted
; encrypt passwords = yes
; smb passwd file = /etc/samba/smbpasswd
# The following are needed to allow password changing from Windows to
# also update the Linux system password.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
# the encrypted SMB passwords. They allow the Unix password
# to be kept in sync with the SMB password.
; unix password sync = Yes
; passwd program = /usr/bin/passwd %u
; passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n
;*passwd:*all*authentication*tokens*updated*successfully*
# Unix users can map to different SMB User names
; username map = /etc/samba/smbusers
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /etc/samba/smb.conf.%m
# Options for using winbind. Winbind allows you to do all account and
# authentication from a Windows or samba domain controller, creating
# accounts on the fly, and maintaining a mapping of Windows RIDs to unix uid's
# and gid's. winbind uid and winbind gid are the only required parameters.
#
# winbind uid is the range of uid's winbind can use when mapping RIDs to uid's
; winbind uid = 10000-20000
#
# winbind gid is the range of uid's winbind can use when mapping RIDs to gid's
; winbind gid = 10000-20000
#
# winbind separator is the character a user must use between their domain
# name and username, defaults to "\"
; winbind separator = @
# winbind use default domain is switch which forces winbind to treat users
# without domain as members of default domain (set in smb.conf)
# Default is False
; winbind use default domain = False
#
#
# template homedir determines the home directory for winbind users, with
# %D expanding to their domain name and %U expanding to their username.
# Make sure that PAM-entry for application which uses pam_winbind is able
# to auto-create those directories using something like pam_mkhomedir. Also, make sure
# that domain (%D) directory do exist in advance as pam_mkhomedir does not create it
; template homedir = /home/%D/%U
#
# template shell determines the shell users authenticated by winbind get
; template shell = /bin/bash
# 5. Browser Control and Networking Options:
# Most people will find that this option gives better performance.
# See Samba HOWTO Collection and the manual pages for details
socket options = TCP_NODELAY
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
; remote announce = 192.168.1.255 192.168.2.44
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable for client (33)
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# 6. Domain Control Options:
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations or Primary Domain Controller for WinNT and Win2k
domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roaming profiles for WinNT and Win2k
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Where to store roaming profiles for Win9x. Be careful with this as it also
# impacts where Win2k finds it's /HOME share
; logon home = \\%L\%U\.profile
# The add user script is used by a domain member to add local user accounts
# that have been authenticated by the domain controller, or by the domain
# controller to add local machine accounts when adding machines to the domain.
# The script must work from the command line when replacing the macros,
# or the operation will fail. Check that groups exist if forcing a group.
# Script for domain controller for adding machines:
; add machine script = /usr/sbin/useradd -d /dev/null -g machines -c 'Machine Account' -s /bin/false -M %u
# Script for domain member for adding local accounts for authenticated users:
; add user script = /usr/sbin/useradd -s /bin/false %u
# Domain groups:
# Domain groups are handled by 'net groupmap' instead of smb.conf,
# read net(8) for more
# 7. Name Resolution Options:
# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be specified
# the default order is "host lmhosts wins bcast". "host" means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
#
name resolve order = wins lmhosts bcast
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = no
# 8. File Naming Options:
# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS files
; default case = lower
# Be very careful with case sensitivity - it can break things!
; case sensitive = no
# Enabling internationalization:
# you can match a Windows code page with a UNIX character set.
# Windows: CP437 (US, default), CP737 (GREEK), CP850 (Latin1 - Western European),
# CP852 (Eastern Eu.), CP861 (Icelandic), CP866 (Cyrillic - Russian),
# CP932 (Japanese - Shift-JIS), CP936 (Simpl. Chinese), CP949 (Korean Hangul),
# CP950 (Trad. Chin.).
# UNIX: ISO8859-1 (Western European), ISO8859-2 (Eastern Eu.),
# ISO8859-5 (Russian Cyrillic), KOI8-R (Alt-Russ. Cyril.),
# CP1251 (Belarusian/Bulgarian), KOI8-U (Ukrainian)
# Basically, all charsets, supported by iconv(3) are permitted here
# See iconv -l for complete list of encodings
# Note that UTF8 is also supported and Samba3 defaults to it in unix and display charsets.
# This is an example for Russian users:
; dos charset = CP866
; unix charset = KOI8-R
; display charset = KOI8-R
# Use sendfile to speed up ReadX and similar requests
# Note that this would not work for Win9X client,
# you should disable this option if you're using Win9X
use sendfile = yes
#============================ Share Definitions ==============================
;[homes]
; comment = Home Directory for '%u'
; browseable = no
; writable = yes
[discC]
# guest account = nobody
comment = C:
hide dot files = no
map hidden = yes
printable = no
path = /mnt/discC
public = yes
# guest only = yes
guest ok = yes
writable = no
[discD]
guest account = nobody
comment = D:
hide dot files = no
map hidden = yes
printable = no
path = /mnt/discD
public = yes
# guest only = yes
guest ok = yes
writable = no
[CDROM]
guest account = nobody
comment = E:
hide dot files = no
map hidden = yes
printable = no
path = /mnt/cdrom
public = yes
# guest only = yes
guest ok = yes
writable = no
[mutabor-home]
comment = home dir for mutabor
writable = yes
valid users = mutabor
path = /home/mutabor
[sinich-home]
comment = home dir for sinich
writable = yes
valid users = sinich
path = /home/sinich
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /var/lib/samba/netlogon
; guest ok = yes
; writable = no
#Uncomment the following 2 lines if you would like your login scripts to
#be created dynamically by ntlogon (check that you have it in the correct
#location (the default of the ntlogon rpm available in contribs)
;root preexec = /usr/bin/ntlogon -u %U -g %G -o %a -d /var/lib/samba/netlogon
;root postexec = rm -f /var/lib/samba/netlogon/%U.bat
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /var/lib/samba/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a CUPS print system there is no need to
# specifically define each individual printer.
# You must configure the samba printers with the appropriate Windows
# drivers on your Windows clients. On the Samba server no filtering is
# done. If you wish that the server provides the driver and the clients
# send PostScript ("Generic PostScript Printer" under Windows), you have
# to swap the 'print command' line below with the commented one.
;[printers]
; comment = All Printers
; path = /var/spool/samba
; browseable = no
# to allow user 'guest account' to print.
; guest ok = yes
; writable = no
; printable = yes
; create mode = 0700
# =====================================
# print command: see above for details.
# =====================================
; print command = lpr-cups -P %p -o raw %s -r # using client side printer drivers.
;; print command = lpr-cups -P %p %s # using cups own drivers (use generic PostScript on clients).
# The following two commands are the samba defaults for printing=cups
# change them only if you need different options:
; lpq command = lpq -P %p
; lprm command = cancel %p-%j
# This share is used for Windows NT-style point-and-print support.
# To be able to install drivers, you need to be either root, or listed
# in the printer admin parameter above. Note that you also need write access
# to the directory and share definition to be able to upload the drivers.
# For more information on this, please see the Printing Support Section of
# /usr/share/doc/samba-<version>/docs/Samba-HOWTO-Collection.pdf
;[print$]
; path = /var/lib/samba/printers
; browseable = yes
; read only = yes
; write list = @adm root
# This is 'a must' when you'd like to support quotas on your shares.
# Quotas are set up per mount point and can be changed from Win2K/XP/2K3
# Explorer's share 'properties' dialog when browsing the share as Domain Admin.
# Quotas are supported and tested on Ext2/3 and XFS file systems.
# It is important to represent mount point as 'drive' share (C$/D$/etc)
# otherwise Win2K/XP/2K3 would not issue proper RPC calls.
# Note also that domain separator should be exact as set above for winbind
;[C$]
; comment = Administrative share for homes
; path = /home
; admin users = @"DOMAIN\\Domain Admins"
; valid users = @"DOMAIN\\Domain Admins"
; writable = yes
# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba/public
; public = yes
; writable = no
; write list = @staff
# Other examples.
#
# A private printer, usable only by Fred. Spool data will be placed in Fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by Fred. Note that Fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %u option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
^ permalink raw reply [flat|nested] 12+ messages in thread