* [Comm] Pentax Optio 555
@ 2004-06-19 16:24 Topper
2004-06-19 16:53 ` Sergey Vlasov
0 siblings, 1 reply; 4+ messages in thread
From: Topper @ 2004-06-19 16:24 UTC (permalink / raw)
To: community
Кому-нибудь удавалось прикрутить сабж? gphoto2 из Сизифа ее не знает.
стандартное монтирование как usb-флешки не проканало.
--
Всем спасибо, все свободны
ALT Linux Sisyphus
Tualatin-1400@1650/384/FX5900XT
Registered Linux User #339833
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Comm] Pentax Optio 555
2004-06-19 16:24 [Comm] Pentax Optio 555 Topper
@ 2004-06-19 16:53 ` Sergey Vlasov
2004-06-19 19:07 ` Topper
0 siblings, 1 reply; 4+ messages in thread
From: Sergey Vlasov @ 2004-06-19 16:53 UTC (permalink / raw)
To: community
[-- Attachment #1: Type: text/plain, Size: 352 bytes --]
On Sat, Jun 19, 2004 at 08:24:50PM +0400, Topper wrote:
> Кому-нибудь удавалось прикрутить сабж? gphoto2 из Сизифа ее не знает.
> стандартное монтирование как usb-флешки не проканало.
С каким ядром пробовали?
Покажите содержимое /proc/bus/usb/devices при подключенной камере, а
также сообщения, появляющиеся в выводе dmesg после подключения.
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Comm] Pentax Optio 555
2004-06-19 16:53 ` Sergey Vlasov
@ 2004-06-19 19:07 ` Topper
2004-06-19 19:26 ` Topper
0 siblings, 1 reply; 4+ messages in thread
From: Topper @ 2004-06-19 19:07 UTC (permalink / raw)
To: community
Sat, 19 Jun 2004 20:53:53 +0400 товарищь Sergey Vlasov писал(а):
SV> С каким ядром пробовали?
SV>
SV> Покажите содержимое /proc/bus/usb/devices при подключенной камере, а
SV> также сообщения, появляющиеся в выводе dmesg после подключения.
SV>
[root@Topper root]# dmesg |less
Linux version 2.4.25-std-up-alt4
==========skipped==============
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 17:46:28 Apr 13 2004
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 19
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1f.4 to 64
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 23
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
==========skipped==============
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: PENTAX Model: DIGITAL_CAMERA Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
USB Mass Storage support registered.
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sda: 1000448 512-byte hdwr sectors (512 MB)
sda: Write Protect is off
sda: sda1
по идее, она должна монтироваться как флешка с использованием масс
сторожа, ибо он ее явно определяет. однако почему-то не монтируется.
точнее, монтируется, но содержимое карточки не отображает...
[root@Topper root]# cat /proc/bus/usb/devices
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=d800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0a17 ProdID=000a Rev= 1.00
S: Manufacturer=PENTAX
S: Product=PENTAX OPTIO 555
S: SerialNumber=000008606203
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50
Driver=usb-storage E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=d000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
--
Всем спасибо, все свободны
ALT Linux Sisyphus
Tualatin-1400@1650/384/FX5900XT
Registered Linux User #339833
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Comm] Pentax Optio 555
2004-06-19 19:07 ` Topper
@ 2004-06-19 19:26 ` Topper
0 siblings, 0 replies; 4+ messages in thread
From: Topper @ 2004-06-19 19:26 UTC (permalink / raw)
To: community
Sat, 19 Jun 2004 23:07:22 +0400 товарищь Topper писал(а):
вопрос снимается. после очередного задумчивого медетирования над
надписью "/dev/sda1 is not a valid block device" была нажата кнопка
"пувер" на фотике...
сессия, мать ее :). башка совсем не варит...
--
Всем спасибо, все свободны
ALT Linux Sisyphus
Tualatin-1400@1650/384/FX5900XT
Registered Linux User #339833
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2004-06-19 19:26 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-06-19 16:24 [Comm] Pentax Optio 555 Topper
2004-06-19 16:53 ` Sergey Vlasov
2004-06-19 19:07 ` Topper
2004-06-19 19:26 ` Topper
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git