* [Comm] Драйвера для Radion 9100
@ 2004-01-04 20:01 Macabre
2004-01-04 20:27 ` [Comm] " Konstantin A. Lepikhov
0 siblings, 1 reply; 11+ messages in thread
From: Macabre @ 2004-01-04 20:01 UTC (permalink / raw)
To: community
Скачал с сайта (ati.com). Поставил, XF86Config настроил. Но при
выполнении /lib/modules/fglrx> ./make_install.sh :
- creating symlink
- recreating module dependency list
- trying a sample load of the kernel module
Warning: loading
/lib/modules/2.4.21-99-athlon/kernel/drivers/char/drm/fglrx.o will taint
the kernel: non-GPL license - Proprietary. (C) 2002 - ATI Technologies,
Starnberg, GERMANY
See http://www.tux.org/lkml/#export-tainted for information about
tainted modules
/lib/modules/2.4.21-99-athlon/kernel/drivers/char/drm/fglrx.o:
init_module: Operation not permitted
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.21-99-athlon/kernel/drivers/char/drm/fglrx.o: insmod
/lib/modules/2.4.21-99-athlon/kernel/drivers/char/drm/fglrx.o failed
/lib/modules/2.4.21-99-athlon/kernel/drivers/char/drm/fglrx.o: insmod
fglrx failed
failed.
Подобное было и с загрузкой nvidia. Я думаю проблема в материнке. Epox
8rda на nforce2.
вот что при загрузке:
>dmesg
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected NVIDIA nForce2 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
[drm] AGP 0.99 aperture @ 0xe0000000 64MB
[drm] Initialized radeon 1.7.0 20020828 on minor 0
mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x4000000
Linux video capture interface: v1.00
[drm] Loading R200 Microcode
eth0: no IPv6 routers present
[fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[fglrx:firegl_stub_register] *ERROR* Fire GL kernel module has to be
loaded prior to any other DRM kernel module!
[fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[fglrx:firegl_stub_register] *ERROR* Fire GL kernel module has to be
loaded prior to any other DRM kernel module!
Что делать? Куда копать дальше?
^ permalink raw reply [flat|nested] 11+ messages in thread
* [Comm] Re: Драйвера для Radion 9100
2004-01-04 20:01 [Comm] Драйвера для Radion 9100 Macabre
@ 2004-01-04 20:27 ` Konstantin A. Lepikhov
2004-01-04 21:29 ` Macabre
0 siblings, 1 reply; 11+ messages in thread
From: Konstantin A. Lepikhov @ 2004-01-04 20:27 UTC (permalink / raw)
To: community
Hi Macabre!
Sunday 04, at 11:01:41 PM you wrote:
> Скачал с сайта (ati.com). Поставил, XF86Config настроил. Но при
> выполнении /lib/modules/fglrx> ./make_install.sh :
>
> - creating symlink
> - recreating module dependency list
> - trying a sample load of the kernel module
> Warning: loading
> /lib/modules/2.4.21-99-athlon/kernel/drivers/char/drm/fglrx.o will taint
> the kernel: non-GPL license - Proprietary. (C) 2002 - ATI Technologies,
> Starnberg, GERMANY
> See http://www.tux.org/lkml/#export-tainted for information about
> tainted modules
> /lib/modules/2.4.21-99-athlon/kernel/drivers/char/drm/fglrx.o:
> init_module: Operation not permitted
> Hint: insmod errors can be caused by incorrect module parameters,
> including invalid IO or IRQ parameters.
> You may find more information in syslog or the output from dmesg
> /lib/modules/2.4.21-99-athlon/kernel/drivers/char/drm/fglrx.o: insmod
> /lib/modules/2.4.21-99-athlon/kernel/drivers/char/drm/fglrx.o failed
> /lib/modules/2.4.21-99-athlon/kernel/drivers/char/drm/fglrx.o: insmod
> fglrx failed
> failed.
>
> Подобное было и с загрузкой nvidia. Я думаю проблема в материнке. Epox
> 8rda на nforce2.
>
> вот что при загрузке:
> >dmesg
>
> Linux agpgart interface v0.99 (c) Jeff Hartmann
> agpgart: Maximum main memory to use for agp memory: 439M
> agpgart: Detected NVIDIA nForce2 chipset
> agpgart: AGP aperture is 64M @ 0xe0000000
> [drm] AGP 0.99 aperture @ 0xe0000000 64MB
> [drm] Initialized radeon 1.7.0 20020828 on minor 0
> mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x4000000
> Linux video capture interface: v1.00
> [drm] Loading R200 Microcode
> eth0: no IPv6 routers present
> [fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
> [fglrx:firegl_stub_register] *ERROR* Fire GL kernel module has to be
> loaded prior to any other DRM kernel module!
> [fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
> [fglrx:firegl_stub_register] *ERROR* Fire GL kernel module has to be
> loaded prior to any other DRM kernel module!
>
> Что делать? Куда копать дальше?
Надо было все это ставить при незапущенных X'ах, т.к у вас получился
overlap с DRI версией драйверов. Так что теперь перезагружайтесь (т.к.
radeon.o не поддерживает module unloading), и делайте make_install &&
fglrxconfig && вперед.
--
WBR, Konstantin chat with ==>ICQ: 109916175
Lepikhov, speak to ==>JID: lakostis@jabber.org
aka L.A. Kostis write to ==>mailto:lakostis@pisem.net.nospam
...The information is like the bank... (c) EC8OR
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Comm] Re: Драйвера для Radion 9100
2004-01-04 20:27 ` [Comm] " Konstantin A. Lepikhov
@ 2004-01-04 21:29 ` Macabre
2004-01-05 7:43 ` Konstantin A. Lepikhov
2004-01-05 10:55 ` Sergey Vlasov
0 siblings, 2 replies; 11+ messages in thread
From: Macabre @ 2004-01-04 21:29 UTC (permalink / raw)
To: community
В Вск, 04.01.2004, в 23:27, Konstantin A. Lepikhov пишет:
> Надо было все это ставить при незапущенных X'ах, т.к у вас получился
> overlap с DRI версией драйверов. Так что теперь перезагружайтесь (т.к.
> radeon.o не поддерживает module unloading), и делайте make_install &&
> fglrxconfig && вперед.
Все сделал. Модуль загрузился. Но поддержки 3D нет. Как проверить? Игры
не запускаются, говорят что 3D не поддерживает.
dmesg
[fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[fglrx] module loaded - fglrx 3.7.0 [Dec 18 2003] on minor 0
mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x4000000
[fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22)
Fire GL built-in AGP-support
Based on agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected nVidia nForce2 chipset
agpgart: Bridge device is in AGP v1/v2 mode
agpgart: AGP aperture is 64M @ 0xe0000000
Power management callback for AGP chipset installed
[fglrx] AGP detected, AgpState = 0x00000000 (hardware caps of chipset)
[fglrx:firegl_unlock] *ERROR* Process 1880 using kernel context 0
eth0: no IPv6 routers present
mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x4000000
[fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22)
[fglrx:firegl_unlock] *ERROR* Process 2092 using kernel context 0
mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x4000000
[fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22)
Fire GL built-in AGP-support
Based on agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected nVidia nForce2 chipset
agpgart: Bridge device is in AGP v1/v2 mode
agpgart: AGP aperture is 64M @ 0xe0000000
Power management callback for AGP chipset installed
[fglrx] AGP detected, AgpState = 0x00000000 (hardware caps of chipset)
[fglrx:firegl_unlock] *ERROR* Process 3226 using kernel context 0
Linux video capture interface: v1.00
>fglrxinfo
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.3 Mesa 4.0.4
^ permalink raw reply [flat|nested] 11+ messages in thread
* [Comm] Re: Драйвера для Radion 9100
2004-01-04 21:29 ` Macabre
@ 2004-01-05 7:43 ` Konstantin A. Lepikhov
2004-01-05 10:55 ` Sergey Vlasov
1 sibling, 0 replies; 11+ messages in thread
From: Konstantin A. Lepikhov @ 2004-01-05 7:43 UTC (permalink / raw)
To: community
Hi Macabre!
Monday 05, at 12:29:34 AM you wrote:
> В Вск, 04.01.2004, в 23:27, Konstantin A. Lepikhov пишет:
> > Надо было все это ставить при незапущенных X'ах, т.к у вас получился
> > overlap с DRI версией драйверов. Так что теперь перезагружайтесь (т.к.
> > radeon.o не поддерживает module unloading), и делайте make_install &&
> > fglrxconfig && вперед.
>
> Все сделал. Модуль загрузился. Но поддержки 3D нет. Как проверить? Игры
> не запускаются, говорят что 3D не поддерживает.
> dmesg
Еще покажите свой XF86Config-4 и вывод /var/log/XFree86.0.log
>
> [fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
> [fglrx] module loaded - fglrx 3.7.0 [Dec 18 2003] on minor 0
> mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x4000000
> [fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22)
> Fire GL built-in AGP-support
> Based on agpgart interface v0.99 (c) Jeff Hartmann
> agpgart: Maximum main memory to use for agp memory: 439M
> agpgart: Detected nVidia nForce2 chipset
> agpgart: Bridge device is in AGP v1/v2 mode
> agpgart: AGP aperture is 64M @ 0xe0000000
> Power management callback for AGP chipset installed
> [fglrx] AGP detected, AgpState = 0x00000000 (hardware caps of chipset)
> [fglrx:firegl_unlock] *ERROR* Process 1880 using kernel context 0
> eth0: no IPv6 routers present
> mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x4000000
> [fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22)
> [fglrx:firegl_unlock] *ERROR* Process 2092 using kernel context 0
> mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x4000000
> [fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22)
> Fire GL built-in AGP-support
> Based on agpgart interface v0.99 (c) Jeff Hartmann
> agpgart: Maximum main memory to use for agp memory: 439M
> agpgart: Detected nVidia nForce2 chipset
> agpgart: Bridge device is in AGP v1/v2 mode
> agpgart: AGP aperture is 64M @ 0xe0000000
> Power management callback for AGP chipset installed
> [fglrx] AGP detected, AgpState = 0x00000000 (hardware caps of chipset)
> [fglrx:firegl_unlock] *ERROR* Process 3226 using kernel context 0
> Linux video capture interface: v1.00
А если указать Option "UseInternalAGPGART" "no" в настройках для
fglrx?
--
WBR, Konstantin chat with ==>ICQ: 109916175
Lepikhov, speak to ==>JID: lakostis@jabber.org
aka L.A. Kostis write to ==>mailto:lakostis@pisem.net.nospam
...The information is like the bank... (c) EC8OR
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Comm] Re: Драйвера для Radion 9100
2004-01-04 21:29 ` Macabre
2004-01-05 7:43 ` Konstantin A. Lepikhov
@ 2004-01-05 10:55 ` Sergey Vlasov
2004-01-05 18:33 ` Vitaly Lipatov
` (2 more replies)
1 sibling, 3 replies; 11+ messages in thread
From: Sergey Vlasov @ 2004-01-05 10:55 UTC (permalink / raw)
To: community
[-- Attachment #1.1: Type: text/plain, Size: 648 bytes --]
On Mon, Jan 05, 2004 at 12:29:34AM +0300, Macabre wrote:
> Fire GL built-in AGP-support
> Based on agpgart interface v0.99 (c) Jeff Hartmann
> agpgart: Maximum main memory to use for agp memory: 439M
> agpgart: Detected nVidia nForce2 chipset
> agpgart: Bridge device is in AGP v1/v2 mode
> agpgart: AGP aperture is 64M @ 0xe0000000
> Power management callback for AGP chipset installed
> [fglrx] AGP detected, AgpState = 0x00000000 (hardware caps of chipset)
Это ошибка во встроенной в fglrx поддержке AGP для nForce. Лечится
прилагаемым патчем, либо использованием agpgart вместо этой встроенной
поддержки (Option "UseInternalAGPGART" "no").
[-- Attachment #1.2: fglrx-3.2.8-nvidia-nforce.patch --]
[-- Type: text/plain, Size: 484 bytes --]
--- kernel-source-fglrx-3.2.8/agpgart_be.c.nforce 2003-11-18 18:15:36 +0300
+++ kernel-source-fglrx-3.2.8/agpgart_be.c 2003-11-18 18:27:54 +0300
@@ -7196,6 +7196,11 @@
agp_bridge.dev = dev;
agp_bridge.capndx = cap_ptr;
+ /* fill in the mode register */
+ pci_read_config_dword(agp_bridge.dev,
+ agp_bridge.capndx + 4, // AGP status register
+ &agp_bridge.mode);
+
return nvidia_nforce_setup(agp_bridge.dev);
}
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Comm] Re: Драйвера для Radion 9100
2004-01-05 10:55 ` Sergey Vlasov
@ 2004-01-05 18:33 ` Vitaly Lipatov
2004-01-06 20:27 ` Macabre
2004-01-06 20:27 ` Macabre
2 siblings, 0 replies; 11+ messages in thread
From: Vitaly Lipatov @ 2004-01-05 18:33 UTC (permalink / raw)
To: community
On 5 Январь 2004 13:55, Sergey Vlasov wrote:
> On Mon, Jan 05, 2004 at 12:29:34AM +0300, Macabre wrote:
> > Fire GL built-in AGP-support
> > Based on agpgart interface v0.99 (c) Jeff Hartmann
> > agpgart: Maximum main memory to use for agp memory: 439M
> > agpgart: Detected nVidia nForce2 chipset
> > agpgart: Bridge device is in AGP v1/v2 mode
> > agpgart: AGP aperture is 64M @ 0xe0000000
> > Power management callback for AGP chipset installed
> > [fglrx] AGP detected, AgpState = 0x00000000 (hardware caps
> > of chipset)
>
> Это ошибка во встроенной в fglrx поддержке AGP для nForce.
А этот патч нельзя встроить в mainstream?
> Лечится прилагаемым патчем, либо использованием agpgart вместо
> этой встроенной поддержки (Option "UseInternalAGPGART" "no").
--
Lav
Виталий Липатов
Санкт-Петербург
GNU! ALT Linux Team! LaTeX! LyX!
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Comm] Re: Драйвера для Radion 9100
2004-01-05 10:55 ` Sergey Vlasov
2004-01-05 18:33 ` Vitaly Lipatov
@ 2004-01-06 20:27 ` Macabre
2004-01-06 20:27 ` Macabre
2 siblings, 0 replies; 11+ messages in thread
From: Macabre @ 2004-01-06 20:27 UTC (permalink / raw)
To: community
[-- Attachment #1: Type: text/plain, Size: 1284 bytes --]
В Пнд, 05.01.2004, в 13:55, Sergey Vlasov пишет:
> Это ошибка во встроенной в fglrx поддержке AGP для nForce. Лечится
> прилагаемым патчем, либо использованием agpgart вместо этой встроенной
> поддержки (Option "UseInternalAGPGART" "no").
Патч накладывал так:
>cd /lib/modules/build_mod
>patch -p1 < fglrx-3.2.8-nvidia-nforce.patch
patching file agpgart_be.c
Hunk #1 succeeded at 7177 (offset -19 lines).
Правильно?
Затем без иксов /lib/modules/fgkrx/make_install
Перегружаюсь и вижу:
>dmesg
[fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[fglrx] module loaded - fglrx 3.7.0 [Dec 18 2003] on minor 0
mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x4000000
[fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22)
Fire GL built-in AGP-support
Based on agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected nVidia nForce2 chipset
agpgart: Bridge device is in AGP v1/v2 mode
agpgart: AGP aperture is 64M @ 0xe0000000
Power management callback for AGP chipset installed
[fglrx] AGP detected, AgpState = 0x00000000 (hardware caps of chipset)
[fglrx:firegl_unlock] *ERROR* Process 1883 using kernel context 0
Приложу еще XF86Config. Сейчас еще скину c Option "UseInternalAGPGART"
"no"
[-- Attachment #2: XF86Config --]
[-- Type: text/plain, Size: 8220 bytes --]
# /.../
# SaX generated XFree86 config file
# Created on: 2004-01-03T18:49:03+0300.
#
# Version: 4.7
# Contact: Marcus Schaefer <sax@suse.de>, 2002
#
# Automatically generated by [ISaX] (4.7)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/kwintv"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/CID"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/xtest"
InputDevices "/dev/ttyS0"
InputDevices "/dev/ttyS1"
InputDevices "/dev/ttyS2"
InputDevices "/dev/ttyS3"
InputDevices "/dev/ttyS4"
InputDevices "/dev/ttyS5"
InputDevices "/dev/ttyS6"
InputDevices "/dev/ttyS7"
InputDevices "/dev/ttyS8"
InputDevices "/dev/psaux"
InputDevices "/dev/logibm"
InputDevices "/dev/sunmouse"
InputDevices "/dev/atibm"
InputDevices "/dev/amigamouse"
InputDevices "/dev/atarimouse"
InputDevices "/dev/inportbm"
InputDevices "/dev/gpmdata"
InputDevices "/dev/mouse"
InputDevices "/dev/usbmouse"
InputDevices "/dev/adbmouse"
InputDevices "/dev/input/mice"
InputDevices "/dev/input/event0"
InputDevices "/dev/pointer0"
InputDevices "/dev/pointer1"
InputDevices "/dev/pointer2"
InputDevices "/dev/pointer3"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail"
Option "RandR" "on"
EndSection
Section "Module"
Load "freetype"
Load "v4l"
Load "type1"
Load "extmod"
Load "dbe"
Load "glx"
Load "speedo"
Load "dri"
EndSection
Section "InputDevice"
Driver "keyboard"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "us,ru"
Option "XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll"
Option "XkbRules" "xfree86"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Device" "/dev/mouse"
Option "Emulate3Buttons" "on"
Option "Name" "Autodetection"
Option "Protocol" "ps/2"
Option "Vendor" "Sysp"
EndSection
Section "Monitor"
Option "CalcAlgorithm" "CheckDesktopGeometry"
DisplaySize 280 210
HorizSync 28-61
Identifier "Monitor[0]"
ModelName "SAMTRON 50(M)E"
Option "DPMS"
VendorName "SAMSUNG"
VertRefresh 50-120
UseModes "Modes[0]"
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "1024x768" 73.89 1024 1080 1192 1360 768 769 772 799
Modeline "800x600" 36.88 800 832 912 1024 600 601 604 621
Modeline "800x600" 44.13 800 840 920 1040 600 601 604 624
Modeline "800x600" 51.73 800 840 928 1056 600 601 604 628
Modeline "800x600" 58.73 800 840 928 1056 600 601 604 632
Modeline "640x480" 23.06 640 656 720 800 480 481 484 497
Modeline "640x480" 27.74 640 664 728 816 480 481 484 500
Modeline "640x480" 32.64 640 672 736 832 480 481 484 503
Modeline "640x480" 36.97 640 672 736 832 480 481 484 505
Modeline "640x480" 42.22 640 680 744 848 480 481 484 508
Modeline "640x480" 46.80 640 680 744 848 480 481 484 511
Modeline "640x480" 51.43 640 680 744 848 480 481 484 514
EndSection
Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
Device "ATI"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
Section "Device"
BoardName "Radeon 9100 QM"
Driver "fglrx"
Identifier "ATI"
Option "no_accel" "no"
Option "no_dri" "no"
Option "mtrr" "off"
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "yes"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x06419064"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "on"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "yes"
Option "FSAAScale" "6"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "yes"
BusID "AGP:2:0:0"
Screen 0
VendorName "ATI"
EndSection
Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Comm] Re: Драйвера для Radion 9100
2004-01-05 10:55 ` Sergey Vlasov
2004-01-05 18:33 ` Vitaly Lipatov
2004-01-06 20:27 ` Macabre
@ 2004-01-06 20:27 ` Macabre
2004-01-07 18:50 ` Sergey Vlasov
2 siblings, 1 reply; 11+ messages in thread
From: Macabre @ 2004-01-06 20:27 UTC (permalink / raw)
To: community
В Пнд, 05.01.2004, в 13:55, Sergey Vlasov пишет:
> Это ошибка во встроенной в fglrx поддержке AGP для nForce. Лечится
> прилагаемым патчем, либо использованием agpgart вместо этой встроенной
> поддержки (Option "UseInternalAGPGART" "no").
Сделал так: Option "UseInternalAGPGART" "no"
>dmesg
[fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[fglrx] module loaded - fglrx 3.7.0 [Dec 18 2003] on minor 0
mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x4000000
[fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22)
[fglrx:firegl_unlock] *ERROR* Process 1880 using kernel context 0
Да! Фаил с драйверами с сайта:
fglrx-glc22-4.3.0-3.7.0.i386.rpm
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Comm] Re: Драйвера для Radion 9100
2004-01-06 20:27 ` Macabre
@ 2004-01-07 18:50 ` Sergey Vlasov
2004-01-07 20:29 ` Macabre
2004-01-07 20:29 ` Macabre
0 siblings, 2 replies; 11+ messages in thread
From: Sergey Vlasov @ 2004-01-07 18:50 UTC (permalink / raw)
To: community
[-- Attachment #1: Type: text/plain, Size: 1046 bytes --]
On Tue, Jan 06, 2004 at 11:27:07PM +0300, Macabre wrote:
> В Пнд, 05.01.2004, в 13:55, Sergey Vlasov пишет:
> > Это ошибка во встроенной в fglrx поддержке AGP для nForce. Лечится
> > прилагаемым патчем, либо использованием agpgart вместо этой встроенной
> > поддержки (Option "UseInternalAGPGART" "no").
> Сделал так: Option "UseInternalAGPGART" "no"
>
> >dmesg
>
> [fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
> [fglrx] module loaded - fglrx 3.7.0 [Dec 18 2003] on minor 0
> mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x4000000
> [fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22)
> [fglrx:firegl_unlock] *ERROR* Process 1880 using kernel context 0
А agpgart из этого ядра нормально понимает nForce? Т.е. какие
сообщения выдаются при загрузке модуля agpgart?
framebuffer используется? Отключать пробовали (vga=normal)?
И ещё: если используется встроенная поддержка AGP, желательно
заблокировать загрузку системного agpgart (alias agpgart off в
/etc/modules.conf), иначе возможны конфликты.
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Comm] Re: Драйвера для Radion 9100
2004-01-07 18:50 ` Sergey Vlasov
@ 2004-01-07 20:29 ` Macabre
2004-01-07 20:29 ` Macabre
1 sibling, 0 replies; 11+ messages in thread
From: Macabre @ 2004-01-07 20:29 UTC (permalink / raw)
To: community
[-- Attachment #1: Type: text/plain, Size: 906 bytes --]
В Срд, 07.01.2004, в 21:50, Sergey Vlasov пишет:
> А agpgart из этого ядра нормально понимает nForce? Т.е. какие
> сообщения выдаются при загрузке модуля agpgart?
Вот стандартный XF86Config и
>dmesd
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected NVIDIA nForce2 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
[drm] AGP 0.99 aperture @ 0xe0000000 64MB
[drm] Initialized radeon 1.7.0 20020828 on minor 0
mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x4000000
Linux video capture interface: v1.00
[drm] Loading R200 Microcode
> framebuffer используется? Отключать пробовали (vga=normal)?
Сейчас попробую и напишу.
> И ещё: если используется встроенная поддержка AGP, желательно
> заблокировать загрузку системного agpgart (alias agpgart off в
> /etc/modules.conf), иначе возможны конфликты.
Сейчас тоже попробую.
[-- Attachment #2: XF86Config --]
[-- Type: text/plain, Size: 5713 bytes --]
# /.../
# SaX generated XFree86 config file
# Created on: 2004-01-03T18:49:03+0300.
#
# Version: 4.7
# Contact: Marcus Schaefer <sax@suse.de>, 2002
#
# Automatically generated by [ISaX] (4.7)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/kwintv"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/CID"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/xtest"
InputDevices "/dev/ttyS0"
InputDevices "/dev/ttyS1"
InputDevices "/dev/ttyS2"
InputDevices "/dev/ttyS3"
InputDevices "/dev/ttyS4"
InputDevices "/dev/ttyS5"
InputDevices "/dev/ttyS6"
InputDevices "/dev/ttyS7"
InputDevices "/dev/ttyS8"
InputDevices "/dev/psaux"
InputDevices "/dev/logibm"
InputDevices "/dev/sunmouse"
InputDevices "/dev/atibm"
InputDevices "/dev/amigamouse"
InputDevices "/dev/atarimouse"
InputDevices "/dev/inportbm"
InputDevices "/dev/gpmdata"
InputDevices "/dev/mouse"
InputDevices "/dev/usbmouse"
InputDevices "/dev/adbmouse"
InputDevices "/dev/input/mice"
InputDevices "/dev/input/event0"
InputDevices "/dev/pointer0"
InputDevices "/dev/pointer1"
InputDevices "/dev/pointer2"
InputDevices "/dev/pointer3"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail"
Option "RandR" "on"
EndSection
Section "Module"
Load "freetype"
Load "v4l"
Load "type1"
Load "extmod"
Load "dbe"
Load "glx"
Load "speedo"
Load "dri"
EndSection
Section "InputDevice"
Driver "keyboard"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "us,ru"
Option "XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll"
Option "XkbRules" "xfree86"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Device" "/dev/mouse"
Option "Emulate3Buttons" "on"
Option "Name" "Autodetection"
Option "Protocol" "ps/2"
Option "Vendor" "Sysp"
EndSection
Section "Monitor"
Option "CalcAlgorithm" "CheckDesktopGeometry"
DisplaySize 280 210
HorizSync 28-61
Identifier "Monitor[0]"
ModelName "SAMTRON 50(M)E"
Option "DPMS"
VendorName "SAMSUNG"
VertRefresh 50-120
UseModes "Modes[0]"
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "1024x768" 73.89 1024 1080 1192 1360 768 769 772 799
Modeline "800x600" 36.88 800 832 912 1024 600 601 604 621
Modeline "800x600" 44.13 800 840 920 1040 600 601 604 624
Modeline "800x600" 51.73 800 840 928 1056 600 601 604 628
Modeline "800x600" 58.73 800 840 928 1056 600 601 604 632
Modeline "640x480" 23.06 640 656 720 800 480 481 484 497
Modeline "640x480" 27.74 640 664 728 816 480 481 484 500
Modeline "640x480" 32.64 640 672 736 832 480 481 484 503
Modeline "640x480" 36.97 640 672 736 832 480 481 484 505
Modeline "640x480" 42.22 640 680 744 848 480 481 484 508
Modeline "640x480" 46.80 640 680 744 848 480 481 484 511
Modeline "640x480" 51.43 640 680 744 848 480 481 484 514
EndSection
Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
Section "Device"
BoardName "Radeon 9100 QM"
BusID "2:0:0"
Driver "radeon"
Identifier "Device[0]"
Screen 0
Option "Rotate" "off"
VendorName "ATI"
EndSection
Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [Comm] Re: Драйвера для Radion 9100
2004-01-07 18:50 ` Sergey Vlasov
2004-01-07 20:29 ` Macabre
@ 2004-01-07 20:29 ` Macabre
1 sibling, 0 replies; 11+ messages in thread
From: Macabre @ 2004-01-07 20:29 UTC (permalink / raw)
To: community
[-- Attachment #1: Type: text/plain, Size: 883 bytes --]
В Срд, 07.01.2004, в 21:50, Sergey Vlasov пишет:
> И ещё: если используется встроенная поддержка AGP, желательно
> заблокировать загрузку системного agpgart (alias agpgart off в
> /etc/modules.conf), иначе возможны конфликты.
В modules.conf разобраться не смог. Там много непонятного. Вот кусок
касающийся agp.
________________________________________________________________________
########################################################################
# AGP
########################################################################
pre-install mga /sbin/modprobe "-k" "agpgart"
pre-install r128 /sbin/modprobe "-k" "agpgart"
pre-install radeon /sbin/modprobe "-k" "agpgart"
options agpgart agp_try_unsupported=1
options snd-intel8x0 snd_ac97_clock=0 snd_enable=1 snd_index=0
И полный modules.conf. Оказывается такая свалка всего (suse 9). В АЛМе
было поменьше всего :-)))
[-- Attachment #2: modules.conf --]
[-- Type: text/plain, Size: 13381 bytes --]
#
# Copyright (c) 1996-2002 SuSE Linux AG Nuernberg, Germany.
# All rights reserved.
#
# Author: Hubert Mantel <mantel@suse.de>, 1996-2002
#
# Configuration file for loadable modules; used by modprobe
#
#
########################################################################
# Aliases - specify your hardware
########################################################################
alias eth0 winbond-840
alias eth1 off
alias tr0 off
alias scsi_hostadapter off
alias fb0 off
########################################################################
# only used for Mylex or Compaq Raid as module
########################################################################
alias block-major-48 off
alias block-major-49 off
alias block-major-72 off
alias block-major-73 off
########################################################################
# only needed for fifth and sixth IDE adaptor
########################################################################
alias block-major-56 off
alias block-major-57 off
########################################################################
# mouse (for older busmice)
########################################################################
alias char-major-10 off
########################################################################
# If you want to use the new autofs4
########################################################################
# alias autofs autofs4
########################################################################
# For parallel port devices, uncomment the following two lines and
# change "frpw" to the protocol type you use
########################################################################
# post-install paride insmod frpw
# pre-remove paride rmmod frpw
########################################################################
#
# Aliases for OSS
#
# These aliases will be changed by YaST2 sound configurator.
# If you would like to configure OSS drivers by yourself, please
# take a look at the files on /usr/src/linux/Documentation/sound.
#
########################################################################
alias char-major-14 off
alias sound off
alias midi off
########################################################################
# Options; these are examples; uncomment and modify the lines you need
########################################################################
# options cdu31a cdu31a_port=0x340 cdu31a_irq=0
# options sbpcd sbpcd=0x230,1
# options aztcd aztcd=0x320
# options cm206 cm206=0x340,11
# options gscd gscd=0x340
# options mcd mcd=0x300,11
# options mcdx mcdx=0x300,11
# options optcd optcd=0x340
# options sjcd sjcd_base=0x340
# options sonycd535 sonycd535=0x340
# options isp16 isp16_cdrom_base=0x340 isp16_cdrom_irq=0 isp16_cdrom_dma=0 isp16_cdrom_type=Sanyo
# options ne io=0x300 irq=5
# Use this if you have two cards:
# options ne io=0x300,0x320 irq=5,7
# options tulip options=0
# options 3c59x options=0
# options 3c501 io=0x280 irq=5
# options 3c503 io=0x280 irq=5 xcvr=0
# options 3c505 io=0x300 irq=10
# options 3c507 io=0x300 irq=10
# options 3c509 irq=10
# options at1700 io=0x260 irq=10
# options smc-ultra io=0x200 irq=10
# options wd io=0x300 irq=10
# options smc9194 io=0x200 irq=10 ifport=0
# options e2100 io=0x300 irq=10 mem=0xd0000 xcvr=0
# options depca io=0x200 irq=7
# options ewrk3 io=0x300 irq=10
# options eexpress io=0x300 irq=10
# options hp-plus io=0x300 irq=10
# options hp io=0x300 irq=10
# options hp100 hp100_port=0x380
# options apricot io=0x300 irq=10
# options ac3200 io=0x300 irq=10 mem=0xd0000
# options de620 io=0x378 irq=7 bnc=1
# options ibmtr io=0xa20
# options arcnet io=0x300 irq=10 shmem=0xd0000
# options plip io=0x378 irq=7
# options eepro io=0x260 irq=10 mem=0x6000
# options eth16i io=0x2a0 irq=10
# options fmv18x io=0x220 irq=10
# options ni52 io=0x360 irq=9 memstart=0xd0000 memend=0xd4000
# options bttv pll=1 radio=0 card=0
# options tuner type=0
# options msp3400 once=1 simple=1
# post-install bttv /sbin/modprobe "-k" tuner; # /sbin/modprobe "-k" msp3400
options dummy0 -o dummy0
options dummy1 -o dummy1
########################################################################
# cipe section
########################################################################
alias cipcb0 cipcb
alias cipcb1 cipcb
options cipcb cipe_debug=0
########################################################################
# block dev aliases
########################################################################
alias block-major-1 rd
alias block-major-2 floppy
alias block-major-3 off
alias block-major-7 loop
alias block-major-8 sd_mod
alias block-major-11 sr_mod
alias block-major-13 xd
alias block-major-15 cdu31a
alias block-major-16 gscd
alias block-major-17 optcd
alias block-major-18 sjcd
alias block-major-20 mcdx
alias block-major-22 off
alias block-major-23 mcd
alias block-major-24 sonycd535
alias block-major-25 sbpcd
alias block-major-26 sbpcd
alias block-major-27 sbpcd
alias block-major-28 sbpcd
alias block-major-29 aztcd
alias block-major-32 cm206
alias block-major-33 off
alias block-major-34 off
# network block device
alias block-major-43 off
alias block-major-45 pd
alias block-major-46 pcd
alias block-major-47 pf
alias block-major-117 evms
########################################################################
# char dev aliases
########################################################################
alias char-major-6 lp
alias char-major-9 st
alias char-major-10-130 softdog
alias char-major-10-134 off
alias char-major-10-135 off
alias char-major-10-175 agpgart
alias char-major-10-181 toshiba
alias char-major-10-240 agpgarti810
alias char-major-10-250 sonypi
options sonypi minor=250
alias char-major-15 off
alias char-major-19 cyclades
alias char-major-20 cyclades
alias char-major-21 sg
alias char-major-27 ftape
# fb
alias char-major-29 off
alias char-major-36 netlink_dev
# alias char-major-43 hisax
# alias char-major-44 hisax
# alias char-major-45 hisax
alias char-major-43 off
alias char-major-44 off
alias char-major-45 off
alias char-major-48 riscom8
alias char-major-49 riscom8
alias char-major-67 coda
alias char-major-75 specialix
alias char-major-76 specialix
alias char-major-81 videodev
alias char-major-81-0 off
alias char-major-81-1 off
alias char-major-81-2 off
alias char-major-81-3 off
alias char-major-83 vtx
options vtx quiet=1
alias char-major-89 i2c-dev
alias char-major-96 pt
alias char-major-97 pg
alias char-major-107 3dfx
alias char-major-109 lvm-mod
# Alsa sound support.
# Warning: please don't modify comments over aliases 'snd-card-#'
alias char-major-116 snd
########################################################################
# ppp over ethernet
# the kernel 2.2 uses pppox
# the kernel 2.4 uses pppoe
########################################################################
if `kernelversion` == "2.2"
alias char-major-144 pppox
post-install pppox insmod mssclampfw
pre-remove pppox rmmod mssclampfw
else
alias char-major-108 ppp_generic
alias char-major-144 pppoe
alias net-pf-24 pppoe
endif
########################################################################
# IrDA
########################################################################
alias char-major-161 ircomm-tty
########################################################################
# USB
########################################################################
# done by hotplug
alias char-major-166 off
########################################################################
# Moxa Multiport Serial Boards
########################################################################
alias char-major-172 moxa
alias char-major-173 moxa
# options moxa type=2,,, baseaddr=0xdc000,,, numports=8,,,
alias char-major-174 mxser
alias char-major-175 mxser
# options mxser ioaddr=0x180
#alias char-major-180 usbcore
alias InterMezzo intermezzo
alias char-major-185 intermezzo
alias char-major-188 usbserial
alias char-major-195 NVdriver
alias char-major-206 osst
alias char-major-212 off
alias binfmt-204 binfmt_aout
alias binfmt-263 binfmt_aout
alias binfmt-264 binfmt_aout
alias binfmt-267 binfmt_aout
alias binfmt-0064 binfmt_aout
alias binfmt-0008 binfmt_aout
alias iso9660 isofs
alias tty-ldisc-1 slip
alias tty-ldisc-2 serio
alias tty-ldisc-5 mkiss
# alias tty-ldisc-7 6pack
alias tty-ldisc-7 off
# IrDA
alias tty-ldisc-11 irtty
# alias ax0 mkiss
alias ax0 off
# alias sp0 6pack
alias sp0 off
alias slip0 slip
alias sl0 slip
alias slip1 slip
alias sl1 slip
########################################################################
# the kernel 2.2 uses ppp.o as ppp driver,
# the kernel 2.4 uses ppp_generic.o
########################################################################
if `kernelversion` == "2.2"
alias ppp0 ppp
alias ppp1 ppp
alias tty-ldisc-3 ppp
else
alias ppp0 ppp_generic
alias ppp1 ppp_generic
alias tty-ldisc-3 ppp_async
endif
alias plip0 plip
alias plip1 plip
# Tunnel interfaces
alias sit0 ipv6
alias gre0 ip_gre
alias ipip0 ipip
alias ppp-compress-18 ppp_mppe
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
alias net-pf-1 unix
alias net-pf-3 ax25
# alias net-pf-3 off
alias net-pf-4 ipx
# alias net-pf-4 off
alias net-pf-5 appletalk
# alias net-pf-5 off
alias net-pf-6 netrom
# alias net-pf-6 off
alias net-pf-10 ipv6
# alias net-pf-10 off
alias net-pf-11 rose
# alias net-pf-11 off
alias net-pf-17 af_packet
alias net-pf-31 bluez
alias bt-proto-0 l2cap
alias bt-proto-2 sco
alias bt-proto-3 rfcomm
alias bt-proto-4 bnep
alias md-personality-1 linear
alias md-personality-2 raid0
alias md-personality-3 raid1
alias md-personality-4 raid5
alias md-personality-7 multipath
alias tap0 ethertap
alias tap1 ethertap
alias tap2 ethertap
alias tap3 ethertap
alias tap4 ethertap
alias tap5 ethertap
alias tap6 ethertap
alias tap7 ethertap
alias tap8 ethertap
alias tap9 ethertap
alias tap10 ethertap
alias tap11 ethertap
alias tap12 ethertap
alias tap13 ethertap
alias tap14 ethertap
alias tap15 ethertap
# don't try to reset isa-pnp cards on startup
options isa-pnp isapnp_reset=0
# end of common part for modules.conf
# begin of i386 part for modules.conf
alias char-major-4 serial
alias char-major-5 serial
alias parport_lowlevel parport_pc
# options parport_pc io=0x378 irq=none,none
# If you have multiple parallel ports, specify them this way:
# options parport_pc io=0x378,0x278 irq=none,none
# Linux ACP modem (Mwave)
alias char-major-10-219 mwave
# options mwave dspirq=10 dspio=0x130 uartirq=3 uartio=0x2f8
# nVidia nforce chipset (network + audio)
#alias eth0 nvnet
#alias sound-slot-1 nvaudio
#alias usb-interface usb-ohci
# IBM thinkpad tpctl
# see /usr/share/doc/packages/tpctl/
alias char-major-10-170 thinkpad
# options thinkpad enable_smapi=0
# Linux-ABI
if `kernelversion` == "2.2"
alias char-major-30 iBCS
alias binfmt-332 iBCS
alias binfmt-518 iBCS
alias binfmt-002c iBCS
else
alias char-major-30 abi-ibcs
alias binfmt-0004 binfmt_coff
alias binfmt-332 abi-ibcs
alias binfmt-518 abi-ibcs
alias binfmt-002c abi-ibcs
alias personality-1 abi-ibcs
alias personality-2 abi-ibcs
alias personality-3 abi-sco
alias personality-4 abi-wyse
alias personality-5 abi-ibcs
alias personality-7 abi-ibcs
alias personality-13 abi-solaris
alias personality-14 abi-uw7
post-install binfmt_misc mount -t binfmt_misc none /proc/sys/fs/binfmt_misc
pre-remove binfmt_misc umount /proc/sys/fs/binfmt_misc
endif
# required for DRI support on SiS chips
options sisfb mem=12288 mode=none
########################################################################
# AGP
########################################################################
pre-install mga /sbin/modprobe "-k" "agpgart"
pre-install r128 /sbin/modprobe "-k" "agpgart"
pre-install radeon /sbin/modprobe "-k" "agpgart"
options agpgart agp_try_unsupported=1
options snd-intel8x0 snd_ac97_clock=0 snd_enable=1 snd_index=0
# YaST2: sound system dependent part
#
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-slot-1 off
alias sound-service-1-0 off
alias sound-slot-2 off
alias sound-service-2-0 off
alias sound-slot-3 off
alias sound-service-3-0 off
options snd snd_cards_limit=1 snd_major=116
# H0_h.jouTqubOOwC:nForce2 AC97 Audio Controler (MCP)
alias snd-card-0 snd-intel8x0
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-11 snd-mixer-oss
alias sound-service-0-12 snd-pcm-oss
# end of i386 part for modules.conf
# please keep this at the end and add local modifications to modules.conf.local
include /etc/modules.conf.local
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2004-01-07 20:29 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-01-04 20:01 [Comm] Драйвера для Radion 9100 Macabre
2004-01-04 20:27 ` [Comm] " Konstantin A. Lepikhov
2004-01-04 21:29 ` Macabre
2004-01-05 7:43 ` Konstantin A. Lepikhov
2004-01-05 10:55 ` Sergey Vlasov
2004-01-05 18:33 ` Vitaly Lipatov
2004-01-06 20:27 ` Macabre
2004-01-06 20:27 ` Macabre
2004-01-07 18:50 ` Sergey Vlasov
2004-01-07 20:29 ` Macabre
2004-01-07 20:29 ` Macabre
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git