From: Canis Cerberus <altlinux@nm.ru> To: ALT Linux Community <community@altlinux.ru> Cc: ALT Linux Sisyphus <sisyphus@altlinux.ru> Subject: [Comm] Quake3 1.32 -- мышь сдохла :-( Date: Mon, 1 Dec 2003 22:03:03 +0300 Message-ID: <200312012203.03917.altlinux@nm.ru> (raw) [-- Attachment #1: Type: text/plain, Size: 590 bytes --] Првет всем !!! Logitech USB Optical, после очередного обновления перестала работать в Quake3 1.32 Симптомы: после запуска кваки курсор висит в левом верхнем углу и не двигается *-( Подскажите, пжалуйста, что делать! Вот как квака работает с мышью я совсем не представляю :-| Может проблема в конфигурации ИКСов (см. конфиг во вложенном файле); наверняка ведь кто-нибудь сталкивался с этой проблемой; откликнитесь что-ли ! С уважением -- Canis Cerberus Magna est veritas et praevalebit ! A1000/KT333/256DDR/MatroxG450/Barracuda80Gb/Teac552/SBLive!/SJ3500c/DJ3820/SL45i Санкт-Петербург [-- Attachment #2: XF86Config --] [-- Type: text/plain, Size: 8595 bytes --] # File generated by XFdrake. # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts. FontPath "unix/:-1" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging #NoTrapSignals # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence # This allows clients to receive this key event. #DontZap # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching # sequences. This allows clients to receive these key events. #DontZoom # This allows the server to start up even if the # mouse device can't be opened/initialised. AllowMouseOpenFail EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Keyboard section # ********************************************************************** Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" Option "AutoRepeat" "250 30" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbVariant" ",winkeys" Option "XkbLayout" "us,ru" # Option "XkbOptions" "grp:caps_toggle" Option "XkbOptions" "grp:caps_toggle,grp:rwin_switch,grp_led:scroll" EndSection # ********************************************************************** # Pointer section # ********************************************************************** Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/mouse" Option "ZAxisMapping" "4 5" # ChordMiddle is an option for some 3-button Logitech mice # Option "ChordMiddle" EndSection #Section "InputDevice" # # Identifier "Mouse2" # Driver "mouse" # Option "Protocol" "PS/2" # Option "Device" "/dev/psaux" # Option "Emulate3Buttons" # Option "Emulate3Timeout" "50" # ChordMiddle is an option for some 3-button Logitech mice # Option "ChordMiddle" #EndSection Section "Module" # This loads the DBE extension module. Load "dbe" # This loads the Video for Linux module. Load "v4l" Load "glx" Load "dri" # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection "extmod" #Option "omit xfree86-dga" EndSubSection # This loads the Type1 and FreeType font modules Load "type1" Load "freetype" EndSection Section "DRI" Mode 0666 EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "CTX|CTX PR711F series" VendorName "CTX" ModelName "Unknown" # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 30.0-95.0 # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 50.0-160.0 # This is a set of extended mode timings typically used for laptop, # TV fullscreen mode or DVD fullscreen output. # These are available along with standard mode timings. # Sony Vaio C1(X,XS,VE,VN)? # 1024x480 @ 85.6 Hz, 48 kHz hsync ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync # 768x576 @ 79 Hz, 50 kHz hsync ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 # 768x576 @ 100 Hz, 61.6 kHz hsync ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616 EndSection Section "Monitor" Identifier "monitor2" VendorName "CTX" ModelName "Unknown" HorizSync 30.0-95.0 VertRefresh 50.0-160.0 EndSection # ********************************************************************** # Graphics device section # ********************************************************************** Section "Device" Identifier "Generic VGA" Driver "vga" EndSection Section "Device" Identifier "Matrox Millennium G450 DualHead 1" VendorName "" BoardName "" Driver "mga" # Clock lines # Uncomment following option if you see a big white block # instead of the cursor! # Option "sw_cursor" Option "AGPMode" "1" Option "DPMS" "on" Screen 0 BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Matrox Millennium G450 DualHead 2" VendorName "" BoardName "" Driver "mga" # Clock lines # Uncomment following option if you see a big white block # instead of the cursor! # Option "sw_cursor" Option "AGPMode" "1" Option "DPMS" "on" Screen 1 BusID "PCI:1:0:0" EndSection # ********************************************************************** # Screen sections # ********************************************************************** Section "Screen" Identifier "screen1" Device "Matrox Millennium G450 DualHead 1" Monitor "CTX|CTX PR711F series" DefaultFbBpp 32 DefaultColorDepth 24 Subsection "Display" Depth 8 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 15 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 32 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection EndSection Section "Screen" Identifier "screen2" Device "Matrox Millennium G450 DualHead 2" Monitor "monitor2" DefaultFbBpp 32 DefaultColorDepth 24 Subsection "Display" Depth 8 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 15 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 32 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection EndSection Section "ServerLayout" Identifier "layout1" Screen "screen1" Screen "screen2" RightOf "screen1" # Option "Xinerama" "on" InputDevice "Mouse1" "CorePointer" # InputDevice "Mouse2" "SendCoreEvents" InputDevice "Keyboard1" "CoreKeyboard" EndSection
next reply other threads:[~2003-12-01 19:03 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2003-12-01 19:03 Canis Cerberus [this message] 2003-12-01 21:05 ` Eugene Ostapets 2003-12-02 8:18 ` Vitaly Ostanin 2003-12-02 9:46 ` Eugene Ostapets 2003-12-02 10:15 ` [Comm] " Vitaly Ostanin 2003-12-03 16:17 ` [Comm] " Canis Cerberus
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=200312012203.03917.altlinux@nm.ru \ --to=altlinux@nm.ru \ --cc=community@altlinux.ru \ --cc=sisyphus@altlinux.ru \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git