* [Comm] Swap @ 2003-10-24 4:06 Nickolay 2003-10-24 8:11 ` [Comm] Swap Michael Shigorin ` (2 more replies) 0 siblings, 3 replies; 21+ messages in thread From: Nickolay @ 2003-10-24 4:06 UTC (permalink / raw) To: community Привет всем есть своп на 850М, но он почемуто всегда при запуске команды TOP всегда 0 показывает, такого ведь не должно быть , хоть и памяти гиг, своп всеравно должен заполняться хоть чуток ;( ^ permalink raw reply [flat|nested] 21+ messages in thread
* [Comm] Re: Swap 2003-10-24 4:06 [Comm] Swap Nickolay @ 2003-10-24 8:11 ` Michael Shigorin 2003-10-24 8:13 ` [Comm] Swap Maxim Tyurin 2003-10-24 11:32 ` Andrey Rahmatullin 2 siblings, 0 replies; 21+ messages in thread From: Michael Shigorin @ 2003-10-24 8:11 UTC (permalink / raw) To: community On Fri, Oct 24, 2003 at 04:06:58AM +0000, Nickolay wrote: > есть своп на 850М, но он почемуто всегда при запуске команды > TOP всегда 0 показывает, такого ведь не должно быть , хоть и > памяти гиг, своп всеравно должен заполняться хоть чуток ;( Необязательно. Но попробуйте dd if=/dev/zero of=/dev/null bs=900M как занимателя памяти :) -- ---- WBR, Michael Shigorin <mike@altlinux.ru> ------ Linux.Kiev http://www.linux.kiev.ua/ ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [Comm] Swap 2003-10-24 4:06 [Comm] Swap Nickolay 2003-10-24 8:11 ` [Comm] Swap Michael Shigorin @ 2003-10-24 8:13 ` Maxim Tyurin 2003-10-24 9:05 ` Nickolay 2003-10-24 11:32 ` Andrey Rahmatullin 2 siblings, 1 reply; 21+ messages in thread From: Maxim Tyurin @ 2003-10-24 8:13 UTC (permalink / raw) To: community [-- Attachment #1: Type: text/plain, Size: 407 bytes --] On Fri, Oct 24, 2003 at 04:06:58AM +0000, Nickolay wrote: > Привет всем > есть своп на 850М, но он почемуто всегда при запуске команды TOP всегда > 0 показывает, такого ведь не должно быть , хоть и памяти гиг, своп > всеравно должен заполняться хоть чуток ;( Никому он ничего не должен :) Ты не написал какие задачи на нем крутятся. -- With Best Regards, Maxim Tyurin JID: MrKooll@jabber.pibhe.com [-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [Comm] Swap 2003-10-24 8:13 ` [Comm] Swap Maxim Tyurin @ 2003-10-24 9:05 ` Nickolay 2003-10-24 10:02 ` Maxim Tyurin 0 siblings, 1 reply; 21+ messages in thread From: Nickolay @ 2003-10-24 9:05 UTC (permalink / raw) To: community Maxim Tyurin пишет: >On Fri, Oct 24, 2003 at 04:06:58AM +0000, Nickolay wrote: > > >>Привет всем >>есть своп на 850М, но он почемуто всегда при запуске команды TOP всегда >>0 показывает, такого ведь не должно быть , хоть и памяти гиг, своп >>всеравно должен заполняться хоть чуток ;( >> >> > >Никому он ничего не должен :) > >Ты не написал какие задачи на нем крутятся. > > > > самая простоя задача! запускаю bzip2 <file.tar> (размера тара больше гига), и система через некоторое время вообще перестает реагировать, не возможно удаленно зайти, ни возможно зайти сконсоли, после ввода пользователя, не могет выдать приглашение на ввод пароля. А своп должен заполняться в любом случае. ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [Comm] Swap 2003-10-24 9:05 ` Nickolay @ 2003-10-24 10:02 ` Maxim Tyurin 2003-10-24 10:08 ` Nickolay 0 siblings, 1 reply; 21+ messages in thread From: Maxim Tyurin @ 2003-10-24 10:02 UTC (permalink / raw) To: community [-- Attachment #1: Type: text/plain, Size: 527 bytes --] On Fri, Oct 24, 2003 at 09:05:22AM +0000, Nickolay wrote: > самая простоя задача! запускаю bzip2 <file.tar> (размера тара больше > гига), и система через некоторое время вообще перестает реагировать, не > возможно удаленно зайти, ни возможно зайти сконсоли, после ввода > пользователя, не могет выдать приглашение на ввод пароля. > А своп должен заполняться в любом случае. Вы думаете bzip2 весь сжимаемый файл в оперативку засовывает? Вы ошибаетесь :) -- With Best Regards, Maxim Tyurin JID: MrKooll@jabber.pibhe.com [-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [Comm] Swap 2003-10-24 10:02 ` Maxim Tyurin @ 2003-10-24 10:08 ` Nickolay 2003-10-24 11:08 ` Maxim Tyurin 0 siblings, 1 reply; 21+ messages in thread From: Nickolay @ 2003-10-24 10:08 UTC (permalink / raw) To: community Maxim Tyurin пишет: >On Fri, Oct 24, 2003 at 09:05:22AM +0000, Nickolay wrote: > > >>самая простоя задача! запускаю bzip2 <file.tar> (размера тара больше >>гига), и система через некоторое время вообще перестает реагировать, не >>возможно удаленно зайти, ни возможно зайти сконсоли, после ввода >>пользователя, не могет выдать приглашение на ввод пароля. >>А своп должен заполняться в любом случае. >> >> > >Вы думаете bzip2 весь сжимаемый файл в оперативку засовывает? Вы >ошибаетесь :) > > > > Понятно что не засовывает он его туда, но почему тогда системы сразе себя вести начинает не адекватно, хотя на РедХате 7.2 такого не наблюдалось? Вообще! ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [Comm] Swap 2003-10-24 10:08 ` Nickolay @ 2003-10-24 11:08 ` Maxim Tyurin 2003-10-24 11:17 ` Nickolay 2003-10-24 11:19 ` Nickolay 0 siblings, 2 replies; 21+ messages in thread From: Maxim Tyurin @ 2003-10-24 11:08 UTC (permalink / raw) To: community [-- Attachment #1: Type: text/plain, Size: 1020 bytes --] On Fri, Oct 24, 2003 at 10:08:58AM +0000, Nickolay wrote: > Maxim Tyurin пишет: > > >On Fri, Oct 24, 2003 at 09:05:22AM +0000, Nickolay wrote: > > > > > >>самая простоя задача! запускаю bzip2 <file.tar> (размера тара больше > >>гига), и система через некоторое время вообще перестает реагировать, не > >>возможно удаленно зайти, ни возможно зайти сконсоли, после ввода > >>пользователя, не могет выдать приглашение на ввод пароля. > >>А своп должен заполняться в любом случае. > >> > >> > > > >Вы думаете bzip2 весь сжимаемый файл в оперативку засовывает? Вы > >ошибаетесь :) > > > > > > > > > Понятно что не засовывает он его туда, но почему тогда системы сразе > себя вести начинает не адекватно, хотя на РедХате 7.2 такого не > наблюдалось? Вообще! Я извините не телепат. Из всей информации вы сказали что у вас 1Gb RAM и все. У меня система нормально работает. Все остальные в округе тоже. И swap не используется когда он не нужен. -- With Best Regards, Maxim Tyurin JID: MrKooll@jabber.pibhe.com [-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [Comm] Swap 2003-10-24 11:08 ` Maxim Tyurin @ 2003-10-24 11:17 ` Nickolay 2003-10-24 11:34 ` Roman Savelyev 2003-10-24 19:00 ` Sergey Vlasov 2003-10-24 11:19 ` Nickolay 1 sibling, 2 replies; 21+ messages in thread From: Nickolay @ 2003-10-24 11:17 UTC (permalink / raw) To: community Maxim Tyurin пишет: >On Fri, Oct 24, 2003 at 10:08:58AM +0000, Nickolay wrote: > > >>Maxim Tyurin пишет: >> >> >> >>>On Fri, Oct 24, 2003 at 09:05:22AM +0000, Nickolay wrote: >>> >>> >>> >>> >>>>самая простоя задача! запускаю bzip2 <file.tar> (размера тара больше >>>>гига), и система через некоторое время вообще перестает реагировать, не >>>>возможно удаленно зайти, ни возможно зайти сконсоли, после ввода >>>>пользователя, не могет выдать приглашение на ввод пароля. >>>>А своп должен заполняться в любом случае. >>>> >>>> >>>> >>>> >>>Вы думаете bzip2 весь сжимаемый файл в оперативку засовывает? Вы >>>ошибаетесь :) >>> >>> >>> >>> >>> >>> >>Понятно что не засовывает он его туда, но почему тогда системы сразе >>себя вести начинает не адекватно, хотя на РедХате 7.2 такого не >>наблюдалось? Вообще! >> >> > >Я извините не телепат. Из всей информации вы сказали что у вас 1Gb RAM >и все. > > Да 1Гиг памяти, свопа на 850М, всё отлично. Но почему тогда в логах лезет следующее? __alloc_pages: 0-order allocation failed (gfp=0x1d2/0) Скажу сразу память нормальная, винты и всё железо тоже >У меня система нормально работает. Все остальные в округе тоже. И swap >не используется когда он не нужен. > > ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [Comm] Swap 2003-10-24 11:17 ` Nickolay @ 2003-10-24 11:34 ` Roman Savelyev 2003-10-24 11:39 ` Nickolay 2003-10-24 19:00 ` Sergey Vlasov 1 sibling, 1 reply; 21+ messages in thread From: Roman Savelyev @ 2003-10-24 11:34 UTC (permalink / raw) To: community On Fri, 24 Oct 2003 11:17:10 +0000 Nickolay <nick@oilbase.chelny.ru> wrote: > Скажу сразу память нормальная, винты и всё железо тоже Точно нормальная ни одна ячейка никогда не сбоит? Установите и запустите memtest86. ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [Comm] Swap 2003-10-24 11:34 ` Roman Savelyev @ 2003-10-24 11:39 ` Nickolay 0 siblings, 0 replies; 21+ messages in thread From: Nickolay @ 2003-10-24 11:39 UTC (permalink / raw) To: community Roman Savelyev пишет: >On Fri, 24 Oct 2003 11:17:10 +0000 >Nickolay <nick@oilbase.chelny.ru> wrote: > > >>Скажу сразу память нормальная, винты и всё железо тоже >> >> >Точно нормальная ни одна ячейка никогда не сбоит? >Установите и запустите memtest86. > > не збоит. ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [Comm] Swap 2003-10-24 11:17 ` Nickolay 2003-10-24 11:34 ` Roman Savelyev @ 2003-10-24 19:00 ` Sergey Vlasov 2003-10-27 6:02 ` Nickolay 2003-10-27 6:03 ` Nickolay 1 sibling, 2 replies; 21+ messages in thread From: Sergey Vlasov @ 2003-10-24 19:00 UTC (permalink / raw) To: community [-- Attachment #1: Type: text/plain, Size: 1952 bytes --] On Fri, Oct 24, 2003 at 11:17:10AM +0000, Nickolay wrote: > Maxim Tyurin пишет: > >On Fri, Oct 24, 2003 at 10:08:58AM +0000, Nickolay wrote: > >>Maxim Tyurin пишет: > >>>On Fri, Oct 24, 2003 at 09:05:22AM +0000, Nickolay wrote: > >>>>самая простоя задача! запускаю bzip2 <file.tar> (размера тара больше > >>>>гига), и система через некоторое время вообще перестает реагировать, не > >>>>возможно удаленно зайти, ни возможно зайти сконсоли, после ввода > >>>>пользователя, не могет выдать приглашение на ввод пароля. > >>>>А своп должен заполняться в любом случае. > >>>> > >>>Вы думаете bzip2 весь сжимаемый файл в оперативку засовывает? Вы > >>>ошибаетесь :) > >>> > >>Понятно что не засовывает он его туда, но почему тогда системы сразе > >>себя вести начинает не адекватно, хотя на РедХате 7.2 такого не > >>наблюдалось? Вообще! А в том случае ядро видело всю доступную память или нет? > >Я извините не телепат. Из всей информации вы сказали что у вас 1Gb RAM > >и все. > > > Да 1Гиг памяти, свопа на 850М, всё отлично. Но почему тогда в логах > лезет следующее? > __alloc_pages: 0-order allocation failed (gfp=0x1d2/0) > Скажу сразу память нормальная, винты и всё железо тоже Прежде всего, я так и не увидел содержимого /proc/slabinfo с вашей системы (cat /proc/slabinfo >>file несколько раз в процессе выполнения этого bzip2). По данным /proc/slabinfo можно будет определить, какая из подсистем ядра начинает потреблять много памяти. Да и на сообщения ядра после загрузки (dmesg) посмотреть было бы неплохо. Ещё покажите полный вывод lsmod. Есть информация, что некоторые версии ядра плохо работают при использовании HIGHMEM, но это обычно связано с использованием какого-либо дискового драйвера, не умеющего работать с HIGHMEM (либо в специфических ситуациях, например, если машина главным образом загружена как NFS-сервер). Можете попробовать перезагрузиться с опцией mem=800M и посмотреть, как поведёт себя система в этом случае. [-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [Comm] Swap 2003-10-24 19:00 ` Sergey Vlasov @ 2003-10-27 6:02 ` Nickolay 2003-10-27 6:03 ` Nickolay 1 sibling, 0 replies; 21+ messages in thread From: Nickolay @ 2003-10-27 6:02 UTC (permalink / raw) To: community > > >Прежде всего, я так и не увидел содержимого /proc/slabinfo с вашей >системы (cat /proc/slabinfo >>file несколько раз в процессе выполнения >этого bzip2). По данным /proc/slabinfo можно будет определить, какая >из подсистем ядра начинает потреблять много памяти. Да и на сообщения >ядра после загрузки (dmesg) посмотреть было бы неплохо. Ещё покажите >полный вывод lsmod. > >Есть информация, что некоторые версии ядра плохо работают при >использовании HIGHMEM, но это обычно связано с использованием >какого-либо дискового драйвера, не умеющего работать с HIGHMEM (либо в >специфических ситуациях, например, если машина главным образом >загружена как NFS-сервер). Можете попробовать перезагрузиться с >опцией mem=800M и посмотреть, как поведёт себя система в этом случае. > > cat /proc/slabinfo slabinfo - version: 1.1 (SMP) kmem_cache 80 80 244 5 5 1 : 252 126 ip_conntrack 228 312 320 26 26 1 : 124 62 ip_fib_hash 18 226 32 2 2 1 : 252 126 journal_head 3 156 48 2 2 1 : 252 126 revoke_table 1 253 12 1 1 1 : 252 126 revoke_record 0 0 32 0 0 1 : 252 126 tcp_tw_bucket 0 0 128 0 0 1 : 252 126 tcp_bind_bucket 4 226 32 2 2 1 : 252 126 tcp_open_request 0 0 96 0 0 1 : 252 126 inet_peer_cache 2 59 64 1 1 1 : 252 126 ip_dst_cache 599 640 192 32 32 1 : 252 126 arp_cache 47 180 128 6 6 1 : 252 126 blkdev_requests 512 560 96 14 14 1 : 252 126 dnotify_cache 0 0 20 0 0 1 : 252 126 file_lock_cache 4960 4960 96 124 124 1 : 252 126 fasync_cache 4144 4444 16 22 22 1 : 252 126 uid_cache 6 226 32 2 2 1 : 252 126 skbuff_head_cache 913 1020 192 51 51 1 : 252 126 sock 207 207 1312 69 69 1 : 60 30 sigqueue 25 29 132 1 1 1 : 252 126 kiobuf 0 0 64 0 0 1 : 252 126 cdev_cache 2356 2360 64 40 40 1 : 252 126 bdev_cache 6 118 64 2 2 1 : 252 126 mnt_cache 15 118 64 2 2 1 : 252 126 inode_cache 342602 342608 512 48944 48944 1 : 124 62 dentry_cache 347515 347640 128 11588 11588 1 : 252 126 dquot 0 0 128 0 0 1 : 252 126 filp 37070 37140 128 1238 1238 1 : 252 126 names_cache 3 3 4096 3 3 1 : 60 30 buffer_head 200888 202440 96 5061 5061 1 : 252 126 mm_struct 72 216 160 9 9 1 : 252 126 vm_area_struct 2732 2800 68 50 50 1 : 252 126 fs_cache 72 236 64 4 4 1 : 252 126 files_cache 72 144 416 16 16 1 : 124 62 signal_act 78 93 1312 31 31 1 : 60 30 size-131072(DMA) 0 0 131072 0 0 32 : 0 0 size-131072 0 0 131072 0 0 32 : 0 0 size-65536(DMA) 0 0 65536 0 0 16 : 0 0 size-65536 2 2 65536 2 2 16 : 0 0 size-32768(DMA) 0 0 32768 0 0 8 : 0 0 size-32768 1 1 32768 1 1 8 : 0 0 size-16384(DMA) 0 0 16384 0 0 4 : 0 0 size-16384 1 1 16384 1 1 4 : 0 0 size-8192(DMA) 0 0 8192 0 0 2 : 0 0 size-8192 11 11 8192 11 11 2 : 0 0 size-4096(DMA) 0 0 4096 0 0 1 : 60 30 size-4096 171 171 4096 171 171 1 : 60 30 size-2048(DMA) 0 0 2048 0 0 1 : 60 30 size-2048 664 664 2048 332 332 1 : 60 30 size-1024(DMA) 0 0 1024 0 0 1 : 124 62 size-1024 128 160 1024 40 40 1 : 124 62 size-512(DMA) 0 0 512 0 0 1 : 124 62 size-512 232 232 512 29 29 1 : 124 62 size-256(DMA) 0 0 256 0 0 1 : 252 126 size-256 465 465 256 31 31 1 : 252 126 size-128(DMA) 0 0 128 0 0 1 : 252 126 size-128 750 750 128 25 25 1 : 252 126 size-64(DMA) 0 0 64 0 0 1 : 252 126 size-64 3481 3481 64 59 59 1 : 252 126 size-32(DMA) 0 0 32 0 0 1 : 252 126 size-32 1130 1130 32 10 10 1 : 252 126 ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [Comm] Swap 2003-10-24 19:00 ` Sergey Vlasov 2003-10-27 6:02 ` Nickolay @ 2003-10-27 6:03 ` Nickolay 2003-10-27 13:17 ` Andrey Rahmatullin 1 sibling, 1 reply; 21+ messages in thread From: Nickolay @ 2003-10-27 6:03 UTC (permalink / raw) To: community > > >Прежде всего, я так и не увидел содержимого /proc/slabinfo с вашей >системы (cat /proc/slabinfo >>file несколько раз в процессе выполнения >этого bzip2). По данным /proc/slabinfo можно будет определить, какая >из подсистем ядра начинает потреблять много памяти. Да и на сообщения >ядра после загрузки (dmesg) посмотреть было бы неплохо. Ещё покажите >полный вывод lsmod. > > lsmod Module Size Used by Tainted: PF vfat 9772 0 (autoclean) fat 31096 0 (autoclean) [vfat] ext2 35520 0 (autoclean) loop 8732 0 (autoclean) ide-cd 27428 0 (autoclean) cdrom 27900 0 (autoclean) [ide-cd] parport_pc 25768 1 (autoclean) aksparlnx 33026 4 parport 24576 1 [parport_pc aksparlnx] iptable_nat 16344 0 (autoclean) (unused) ip_conntrack 20288 1 (autoclean) [iptable_nat] iptable_filter 1704 1 (autoclean) ip_tables 11672 4 [iptable_nat iptable_filter] nls_cp866 3804 1 (autoclean) nls_koi8-r 3836 1 (autoclean) smbfs 37136 1 (autoclean) ipx 19588 9 (autoclean) af_packet 13608 3 (autoclean) autofs4 8564 1 (autoclean) dl2k 15428 2 (autoclean) eepro100 19092 1 (autoclean) mii 2464 0 (autoclean) [eepro100] floppy 47516 0 (autoclean) serial 56516 0 (autoclean) isa-pnp 29508 0 (autoclean) [serial] ext3 64448 1 (autoclean) jbd 41096 1 (autoclean) [ext3] rtc 6844 0 (autoclean) reiserfs 169280 3 megaraid 25212 5 aic7xxx 119964 0 (unused) sd_mod 11004 10 scsi_mod 95428 3 [megaraid aic7xxx sd_mod] ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [Comm] Swap 2003-10-27 6:03 ` Nickolay @ 2003-10-27 13:17 ` Andrey Rahmatullin 2003-11-14 5:38 ` Nickolay 2003-11-14 11:37 ` Nickolay 0 siblings, 2 replies; 21+ messages in thread From: Andrey Rahmatullin @ 2003-10-27 13:17 UTC (permalink / raw) To: community [-- Attachment #1: signed data --] [-- Type: text/plain, Size: 207 bytes --] В сообщении от 27 Октябрь 2003 11:03 Nickolay написал(a): [...] > lsmod > Module Size Used by Tainted: PF ^^ Ой... Чего так? -- Best regards, wRAR ALT Linux Team [-- Attachment #2: signature --] [-- Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [Comm] Swap 2003-10-27 13:17 ` Andrey Rahmatullin @ 2003-11-14 5:38 ` Nickolay 2003-11-14 9:14 ` Andrey Rahmatullin 2003-11-14 11:37 ` Nickolay 1 sibling, 1 reply; 21+ messages in thread From: Nickolay @ 2003-11-14 5:38 UTC (permalink / raw) To: community Andrey Rahmatullin wrote: >В сообщении от 27 Октябрь 2003 11:03 Nickolay написал(a): >[...] > > > >>lsmod >>Module Size Used by Tainted: PF >> >> > ^^ > Ой... >Чего так? > > > >------------------------------------------------------------------------ > > > Можно вопрос? Всмысле "Ой" ;( ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [Comm] Swap 2003-11-14 5:38 ` Nickolay @ 2003-11-14 9:14 ` Andrey Rahmatullin 0 siblings, 0 replies; 21+ messages in thread From: Andrey Rahmatullin @ 2003-11-14 9:14 UTC (permalink / raw) To: community [-- Attachment #1: signed data --] [-- Type: text/plain, Size: 740 bytes --] В сообщении от 14 Ноябрь 2003 10:38 Nickolay написал(a): > >>lsmod > >>Module Size Used by Tainted: PF > > ^^ > > Ой... > Можно вопрос? > Всмысле "Ой" ;( См. /usr/share/doc/kernel-doc-2.4.22rel/oops-tracing.txt P - (был) загружен модуль с несвободной лицензией F - к.-л. модуль был загружен с --force Эти флажки означают, что ядро не является чистым, и это может быть причиной к.-л. проблем с ним. В обычных ситуациях Р появляется после загрузки модуля nvidia либо других закрытых сторонних драйверов. Флажки не пропадают даже после выгрузки виновного модуля. -- Я прошу прекратить обсуждение на эту тему, ибо оно далеко отклонилось от тематики списка рассылки sisyphus@. -- ldv in sisyphus@ [-- Attachment #2: signature --] [-- Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [Comm] Swap 2003-10-27 13:17 ` Andrey Rahmatullin 2003-11-14 5:38 ` Nickolay @ 2003-11-14 11:37 ` Nickolay 1 sibling, 0 replies; 21+ messages in thread From: Nickolay @ 2003-11-14 11:37 UTC (permalink / raw) To: community Andrey Rahmatullin wrote: >В сообщении от 27 Октябрь 2003 11:03 Nickolay написал(a): >[...] > > > >>lsmod >>Module Size Used by Tainted: PF >> >> > ^^ > Ой... >Чего так? > > > Можно вопрос? Чего "Ой" ;( ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [Comm] Swap 2003-10-24 11:08 ` Maxim Tyurin 2003-10-24 11:17 ` Nickolay @ 2003-10-24 11:19 ` Nickolay 2003-10-24 12:01 ` Maxim Tyurin 1 sibling, 1 reply; 21+ messages in thread From: Nickolay @ 2003-10-24 11:19 UTC (permalink / raw) To: community Maxim Tyurin пишет: >Я извините не телепат. Из всей информации вы сказали что у вас 1Gb RAM >и все. > > А какую информаци еще надо? >У меня система нормально работает. Все остальные в округе тоже. И swap >не используется когда он не нужен. > > У меня на клиентской тачке тоже система нормально работает, а вот на серваке это мне кажется более чем странно все таки. ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [Comm] Swap 2003-10-24 11:19 ` Nickolay @ 2003-10-24 12:01 ` Maxim Tyurin 2003-10-24 12:15 ` Nickolay 0 siblings, 1 reply; 21+ messages in thread From: Maxim Tyurin @ 2003-10-24 12:01 UTC (permalink / raw) To: community [-- Attachment #1: Type: text/plain, Size: 600 bytes --] On Fri, Oct 24, 2003 at 11:19:50AM +0000, Nickolay wrote: > Maxim Tyurin пишет: > > >Я извините не телепат. Из всей информации вы сказали что у вас 1Gb RAM > >и все. > > > > > А какую информаци еще надо? Ну при большом IO если не включен DMA система будет сильно тормозить. > > >У меня система нормально работает. Все остальные в округе тоже. И swap > >не используется когда он не нужен. > > > > > У меня на клиентской тачке тоже система нормально работает, а вот на > серваке это мне кажется более чем странно все таки. -- With Best Regards, Maxim Tyurin JID: MrKooll@jabber.pibhe.com [-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --] ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [Comm] Swap 2003-10-24 12:01 ` Maxim Tyurin @ 2003-10-24 12:15 ` Nickolay 0 siblings, 0 replies; 21+ messages in thread From: Nickolay @ 2003-10-24 12:15 UTC (permalink / raw) To: community Maxim Tyurin пишет: >On Fri, Oct 24, 2003 at 11:19:50AM +0000, Nickolay wrote: > > >>Maxim Tyurin пишет: >> >> >> >>>Я извините не телепат. Из всей информации вы сказали что у вас 1Gb RAM >>>и все. >>> >>> >>> >>> >>А какую информаци еще надо? >> >> > >Ну при большом IO если не включен DMA система будет сильно тормозить. > > > Тама RAID5 стоит 180 гиг. SCSI винты ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [Comm] Swap 2003-10-24 4:06 [Comm] Swap Nickolay 2003-10-24 8:11 ` [Comm] Swap Michael Shigorin 2003-10-24 8:13 ` [Comm] Swap Maxim Tyurin @ 2003-10-24 11:32 ` Andrey Rahmatullin 2 siblings, 0 replies; 21+ messages in thread From: Andrey Rahmatullin @ 2003-10-24 11:32 UTC (permalink / raw) To: community Nickolay пишет: > Привет всем > есть своп на 850М, но он почемуто всегда при запуске команды TOP всегда > 0 показывает, такого ведь не должно быть , хоть и памяти гиг, своп > всеравно должен заполняться хоть чуток ;( А у меня на 256Мб свопа вообще нет, и практически никогда не бывает OOM. (ну, бывает, когда компилишь ядро и еще что-нибудь параллеьно и сидишь в Инете с кучей открытых страниц). ^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2003-11-14 11:37 UTC | newest] Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2003-10-24 4:06 [Comm] Swap Nickolay 2003-10-24 8:11 ` [Comm] Swap Michael Shigorin 2003-10-24 8:13 ` [Comm] Swap Maxim Tyurin 2003-10-24 9:05 ` Nickolay 2003-10-24 10:02 ` Maxim Tyurin 2003-10-24 10:08 ` Nickolay 2003-10-24 11:08 ` Maxim Tyurin 2003-10-24 11:17 ` Nickolay 2003-10-24 11:34 ` Roman Savelyev 2003-10-24 11:39 ` Nickolay 2003-10-24 19:00 ` Sergey Vlasov 2003-10-27 6:02 ` Nickolay 2003-10-27 6:03 ` Nickolay 2003-10-27 13:17 ` Andrey Rahmatullin 2003-11-14 5:38 ` Nickolay 2003-11-14 9:14 ` Andrey Rahmatullin 2003-11-14 11:37 ` Nickolay 2003-10-24 11:19 ` Nickolay 2003-10-24 12:01 ` Maxim Tyurin 2003-10-24 12:15 ` Nickolay 2003-10-24 11:32 ` Andrey Rahmatullin
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git