* [Comm] No 3D acseleration with Matrox G450 & kernel-image-std-up-2.4.22-alt6
@ 2003-10-20 16:06 Canis Cerberus
2003-10-21 14:10 ` Sergey Vlasov
0 siblings, 1 reply; 3+ messages in thread
From: Canis Cerberus @ 2003-10-20 16:06 UTC (permalink / raw)
To: ALT Linux Community
[-- Attachment #1: Type: text/plain, Size: 1821 bytes --]
Ни фига не работает 3D ускорение с ядром kernel-image-std-up-2.4.22-alt6 и
видеокартой Matrox Millenium G450 !
Когда я гружу ядро kernel24-up-2.4.20-alt7 то все в порядке :-)
Когда гружусь с kernel-image-std-up-2.4.22-alt6 - удаляю XF86config и создаю
заново XFdrake'ом (выбираю XFree с аппаратным 3D ускорением) - то ничего
подобного, tuxracer (например) как выводился по кадрам, так и выводится
дальше.
Как это понимать?
$ uname -a
Linux localhost.localdomain 2.4.22-std-up-alt6 #1 Wed Oct 8 18:14:27 MSD 2003
i686 unknown unknown GNU/Linux
$
$ rpm -qa | grep -i kernel
kernel-image-std-up-2.4.22-alt6
kernel-headers-wks-up-2.4.21rel-alt1
kernel-modules-lm_sensors-std-up-2.8.0-alt8.6
kernel-image-std-up-2.4.22-alt2
kernel24-up-2.4.20-alt7
kernel-modules-lm_sensors-wks-up-2.8.0-alt1
kernel24-headers-2.4.20-alt5
kernel24-linus-up-2.4.20-alt0.9
kernel-headers-std-up-2.4.22-alt6
kernel-feat-fs-xfs-1.3-alt5
kernel-feat-fs-ntfs-2.1.4c-alt1
kernel-modules-v4l-std-up-2003.10.07-alt1.6
kernel-image-wks-up-2.4.21rel-alt1
kernel24-headers-2.4.20-alt7
kernel-modules-alsa-wks-up-0.9.6-alt1
kernel24-up-2.4.20-alt5
kernel-modules-lm_sensors-std-up-2.8.0-alt7.2
kernel-headers-common-1.1.4-alt1
kernel-modules-alsa-std-up-0.9.6-alt9.2
kernel-modules-alsa-std-up-0.9.7-alt1.6
kernel-doc-ltmodem-8.26a9-alt1
$
$ rpm -qa | grep -i xfree
XFree86-KOI8-100dpi-fonts-3.0-ipl7mdk
XFree86-100dpi-fonts-4.3.0-alt4
XFree86-Xnest-4.3.0-alt4
XFree86-cyr_rfx-fonts-koi8-r-1.1-alt7
XFree86-locales-4.3.0-alt4
XFree86-xfs-4.3.0-alt4
XFree86-libs-4.3.0-alt4
XFree86-KOI8-3.0-ipl7mdk
XFree86-4.3.0-alt4
XFree86-bitmaps-4.3.0-alt4
XFree86-Xvfb-4.3.0-alt4
XFree86-75dpi-fonts-4.3.0-alt4
XFree86-devel-4.3.0-alt4
XFree86-utils-4.3.0-alt4
XFree86-server-4.3.0-alt4
$
--
Canis Cerberus
Magna est veritas et praevalebit !
Санкт-Петербург
[-- Attachment #2: XF86Config --]
[-- Type: text/plain, Size: 16230 bytes --]
# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom
# This allows the server to start up even if the
# mouse device can't be opened/initialised.
AllowMouseOpenFail
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Keyboard section
# **********************************************************************
Section "Keyboard"
Protocol "Standard"
# when using XQUEUE, comment out the above line, and uncomment the
# following line
#Protocol "Xqueue"
AutoRepeat 250 30
# Let the server do the NumLock processing. This should only be
# required when using pre-R6 clients
#ServerNumLock
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#Xleds "1 2 3"
#To set the LeftAlt to Meta, RightAlt key to ModeShift,
#RightCtl key to Compose, and ScrollLock key to ModeLock:
LeftAlt Meta
RightAlt Meta
ScrollLock Compose
RightCtl Control
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# XkbDisable
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# XkbModel "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# XkbModel "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# XkbLayout "de"
# or:
# XkbLayout "de"
# XkbVariant "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# XkbOptions "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# XkbRules "xfree86"
# XkbModel "pc101"
# XkbLayout "us"
# XkbVariant ""
# XkbOptions ""
XkbKeycodes "xfree86"
XkbTypes "default"
XkbCompat "default"
XkbSymbols "us(pc105)"
XkbGeometry "pc"
XkbRules "xfree86"
XkbModel "pc105"
XkbLayout "ru"
XkbOptions "grp:caps_toggle"
EndSection
# **********************************************************************
# Pointer section
# **********************************************************************
Section "Pointer"
Protocol "IMPS/2"
Device "/dev/usbmouse"
ZAxisMapping 4 5
# Emulate3Buttons
# Emulate3Timeout 50
# ChordMiddle is an option for some 3-button Logitech mice
# ChordMiddle
EndSection
#Section "XInput"
# SubSection "Mouse"
# DeviceName "Mouse2"
# Protocol "PS/2"
# Device "/dev/psaux"
# AlwaysCore
# Emulate3Buttons
# Emulate3Timeout 50
# ChordMiddle is an option for some 3-button Logitech mice
# ChordMiddle
# EndSubSection
#EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "CTX|CTX PR710, PR711 series"
VendorName "CTX"
ModelName "Unknown"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30.0-95.0
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50.0-160.0
# Modes can be specified in two formats. A compact one-line format, or
# a multi-line format.
# These two are equivalent
# ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace
# Mode "1024x768i"
# DotClock 45
# HTimings 1024 1048 1208 1264
# VTimings 768 776 784 817
# Flags "Interlace"
# EndMode
# This is a set of standard mode timings. Modes that are out of monitor spec
# are automatically deleted by the server (provided the HorizSync and
# VertRefresh lines are correct), so there's no immediate need to
# delete mode timings (unless particular mode timings don't work on your
# monitor). With these modes, the best standard mode that your monitor
# and video card can support for a given resolution is automatically
# used.
# 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x400" 25.175 640 664 760 800 400 409 411 450
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525
# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600" 36 800 824 896 1024 600 601 603 625
# 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
Modeline "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817 Interlace
# 640x400 @ 85 Hz, 37.86 kHz hsync
Modeline "640x400" 31.5 640 672 736 832 400 401 404 445 -HSync +VSync
# 640x480 @ 72 Hz, 36.5 kHz hsync
Modeline "640x480" 31.5 640 680 720 864 480 488 491 521
# 640x480 @ 75 Hz, 37.50 kHz hsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -HSync -VSync
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync
# 640x480 @ 85 Hz, 43.27 kHz hsync
Modeline "640x480" 36 640 696 752 832 480 481 484 509 -HSync -VSync
# 1152x864 @ 89 Hz interlaced, 44 kHz hsync
ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985 Interlace
# 800x600 @ 72 Hz, 48.0 kHz hsync
Modeline "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync
# 640x480 @ 100 Hz, 53.01 kHz hsync
Modeline "640x480" 45.8 640 672 768 864 480 488 494 530 -HSync -VSync
# 1152x864 @ 60 Hz, 53.5 kHz hsync
Modeline "1152x864" 89.9 1152 1216 1472 1680 864 868 876 892 -HSync -VSync
# 800x600 @ 85 Hz, 55.84 kHz hsync
Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync
# 1024x768 @ 70 Hz, 56.5 kHz hsync
Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace
# 800x600 @ 100 Hz, 64.02 kHz hsync
Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync
# 1024x768 @ 76 Hz, 62.5 kHz hsync
Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823
# 1152x864 @ 70 Hz, 62.4 kHz hsync
Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054
# 1400x1050 @ 60 Hz, 65.5 kHz
ModeLine "1400x1050" 122.0 1400 1488 1640 1880 1050 1052 1064 1082 +HSync +VSync
# 1024x768 @ 85 Hz, 70.24 kHz hsync
Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync
# 1152x864 @ 78 Hz, 70.8 kHz hsync
Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908
# 1280x1024 @ 70 Hz, 74.59 kHz hsync
Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync
# 1600x1200 @ 60Hz, 75.00 kHz hsync
Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
# 1152x864 @ 84 Hz, 76.0 kHz hsync
Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908
# 1280x1024 @ 74 Hz, 78.85 kHz hsync
Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064
# 1024x768 @ 100Hz, 80.21 kHz hsync
Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync
# 1280x1024 @ 76 Hz, 81.13 kHz hsync
Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
# 1400x1050 @ 75 Hz, 82.2 kHz hsync
ModeLine "1400x1050" 155.8 1400 1464 1784 1912 1050 1052 1064 1090 +HSync +VSync
# 1600x1200 @ 70 Hz, 87.50 kHz hsync
Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync
# 1152x864 @ 100 Hz, 89.62 kHz hsync
Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync
# 1280x1024 @ 85 Hz, 91.15 kHz hsync
Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync
# 1600x1200 @ 75 Hz, 93.75 kHz hsync
Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
# 1600x1200 @ 85 Hz, 105.77 kHz hsync
Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync
# 1600x1200 @ 85 Hz, 106.3 kHz hsync
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync
# 1280x1024 @ 100 Hz, 107.16 kHz hsync
Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync
# 1800x1440 @ 64Hz, 96.15 kHz hsync
ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# 1800x1440 @ 70Hz, 104.52 kHz hsync
ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# 1920x1440 @ 60 Hz, 90.0 kHz hsync
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -HSync +VSync
# 1920x1440 @ 75 Hz, 112.5kHz hsync
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -HSync +VSync
# 512x384 @ 78 Hz, 31.50 kHz hsync
Modeline "512x384" 20.160 512 528 592 640 384 385 388 404 -HSync -VSync
# 512x384 @ 85 Hz, 34.38 kHz hsync
Modeline "512x384" 22 512 528 592 640 384 385 388 404 -HSync -VSync
# Low-res Doublescan modes
# If your chipset does not support doublescan, you get a 'squashed'
# resolution like 320x400.
# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
Modeline "320x200" 12.588 320 336 384 400 200 204 205 225 Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
Modeline "320x240" 12.588 320 336 384 400 240 245 246 262 Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
Modeline "320x240" 15.750 320 336 384 400 240 244 246 262 Doublescan
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
ModeLine "400x300" 18 400 416 448 512 300 301 302 312 Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
Modeline "400x300" 20 400 416 480 528 300 301 303 314 Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
Modeline "400x300" 25 400 424 488 520 300 319 322 333 Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312 Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
Modeline "480x300" 23.890 480 496 576 632 300 301 303 314 Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
Modeline "480x300" 25 480 496 576 632 300 301 303 314 Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
Modeline "480x300" 29.952 480 504 584 624 300 319 322 333 Doublescan
# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.
# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
Section "Device"
Identifier "Generic VGA"
Chipset "generic"
EndSection
Section "Device"
Identifier "Matrox Millennium G450 DualHead 2"
VendorName "Unknown"
BoardName "Unknown"
# Clock lines
# Uncomment following option if you see a big white block
# instead of the cursor!
# Option "sw_cursor"
Option "power_saver"
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# The Colour SVGA server
Section "Screen"
Driver "svga"
Device "Generic VGA"
Monitor "CTX|CTX PR710, PR711 series"
Subsection "Display"
Depth 8
Modes "320x200"
ViewPort 0 0
EndSubsection
EndSection
Section "Screen"
Driver "vga16"
Device "Generic VGA"
Monitor "CTX|CTX PR710, PR711 series"
Subsection "Display"
Modes "640x480" "800x600"
ViewPort 0 0
EndSubsection
EndSection
Section "Screen"
Driver "vga2"
Device "Generic VGA"
Monitor "CTX|CTX PR710, PR711 series"
Subsection "Display"
Modes "640x480" "800x600"
ViewPort 0 0
EndSubsection
EndSection
Section "Screen"
Driver "accel"
Device "Matrox Millennium G450 DualHead 2"
Monitor "CTX|CTX PR710, PR711 series"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "Screen"
Driver "fbdev"
Device "Matrox Millennium G450 DualHead 2"
Monitor "CTX|CTX PR710, PR711 series"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "default"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 15
Modes "default"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "default"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "default"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "default"
ViewPort 0 0
EndSubsection
EndSection
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Comm] No 3D acseleration with Matrox G450 & kernel-image-std-up-2.4.22-alt6
2003-10-20 16:06 [Comm] No 3D acseleration with Matrox G450 & kernel-image-std-up-2.4.22-alt6 Canis Cerberus
@ 2003-10-21 14:10 ` Sergey Vlasov
2003-10-22 17:06 ` Canis Cerberus
0 siblings, 1 reply; 3+ messages in thread
From: Sergey Vlasov @ 2003-10-21 14:10 UTC (permalink / raw)
To: ALT Linux Community
[-- Attachment #1: Type: text/plain, Size: 1608 bytes --]
On Mon, Oct 20, 2003 at 08:06:01PM +0400, Canis Cerberus wrote:
> Ни фига не работает 3D ускорение с ядром kernel-image-std-up-2.4.22-alt6 и
> видеокартой Matrox Millenium G450 !
> Когда я гружу ядро kernel24-up-2.4.20-alt7 то все в порядке :-)
> Когда гружусь с kernel-image-std-up-2.4.22-alt6 - удаляю XF86config и создаю
> заново XFdrake'ом (выбираю XFree с аппаратным 3D ускорением) - то ничего
> подобного, tuxracer (например) как выводился по кадрам, так и выводится
> дальше.
> Как это понимать?
>
> $ uname -a
> Linux localhost.localdomain 2.4.22-std-up-alt6 #1 Wed Oct 8 18:14:27 MSD 2003
> i686 unknown unknown GNU/Linux
> $
>
> $ rpm -qa | grep -i kernel
> kernel-image-std-up-2.4.22-alt6
> kernel-headers-wks-up-2.4.21rel-alt1
> kernel-modules-lm_sensors-std-up-2.8.0-alt8.6
> kernel-image-std-up-2.4.22-alt2
> kernel24-up-2.4.20-alt7
> kernel-modules-lm_sensors-wks-up-2.8.0-alt1
> kernel24-headers-2.4.20-alt5
> kernel24-linus-up-2.4.20-alt0.9
> kernel-headers-std-up-2.4.22-alt6
> kernel-feat-fs-xfs-1.3-alt5
> kernel-feat-fs-ntfs-2.1.4c-alt1
> kernel-modules-v4l-std-up-2003.10.07-alt1.6
> kernel-image-wks-up-2.4.21rel-alt1
> kernel24-headers-2.4.20-alt7
> kernel-modules-alsa-wks-up-0.9.6-alt1
> kernel24-up-2.4.20-alt5
> kernel-modules-lm_sensors-std-up-2.8.0-alt7.2
> kernel-headers-common-1.1.4-alt1
> kernel-modules-alsa-std-up-0.9.6-alt9.2
> kernel-modules-alsa-std-up-0.9.7-alt1.6
> kernel-doc-ltmodem-8.26a9-alt1
kernel-modules-drm-std-up не хватает (сейчас в сизифе уже
4.3.0-alt19.7 для ядра alt7).
Если это не поможет - ещё покажите /var/log/XFree86.0.log и вывод
dmesg.
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Comm] No 3D acseleration with Matrox G450 & kernel-image-std-up-2.4.22-alt6
2003-10-21 14:10 ` Sergey Vlasov
@ 2003-10-22 17:06 ` Canis Cerberus
0 siblings, 0 replies; 3+ messages in thread
From: Canis Cerberus @ 2003-10-22 17:06 UTC (permalink / raw)
To: community
> kernel-modules-drm-std-up не хватает
Большое Спасиба ! Что бы я делал без вашего совета !
> (сейчас в сизифе уже
> 4.3.0-alt19.7 для ядра alt7).
Не беспокойтесь, у меня всегда полностью скаченный Сизиф :-)
--
Canis Cerberus
Magna est veritas et praevalebit !
Санкт-Петербург
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2003-10-22 17:06 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-10-20 16:06 [Comm] No 3D acseleration with Matrox G450 & kernel-image-std-up-2.4.22-alt6 Canis Cerberus
2003-10-21 14:10 ` Sergey Vlasov
2003-10-22 17:06 ` Canis Cerberus
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git