* [Comm] USB on IBM ThinkPad 570
@ 2003-10-15 8:13 Shrek
2003-10-15 12:58 ` Sergey Vlasov
0 siblings, 1 reply; 3+ messages in thread
From: Shrek @ 2003-10-15 8:13 UTC (permalink / raw)
To: community
День добрый.
В общем перестал работать usb на ноуте. При подключении мыши имеем следующее
kernel: hub.c: new USB device 00:06.2-1, assigned address 2
kernel: usb-uhci.c: interrupt, status 2, frame# 1333
kernel: usb.c: USB device not accepting new address=2 (error=-110)
kernel: hub.c: new USB device 00:06.2-1, assigned address 3
kernel: usb.c: USB device not accepting new address=3 (error=-110)
kernel: hub.c: new USB device 00:06.2-1, assigned address 4
kernel: usb.c: USB device 4 (vend/prod 0x46d/0xc00e) is not claimed by
any active driver.
/etc/hotplug/usb.agent: Setup usbmouse hid for USB product 46d/c00e/1110
kernel: usb.c: registered new driver usb_mouse
kernel: usb-uhci.c: interrupt, status 2, frame# 692
kernel: usb.c: error getting string descriptor 0 (error=-84)
kernel: usb.c: error getting string descriptor 0 (error=-84)
kernel: input0: USB HIDBP Mouse 046d:c00e on usb1:4.0
kernel: usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
kernel: usb.c: registered new driver hiddev
kernel: usb.c: registered new driver hid
kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
kernel: hid-core.c: USB HID support drivers
kernel: mice: PS/2 mouse device common for all mice
kernel: usb-uhci.c: interrupt, status 3, frame# 124
kernel: usb-uhci.c: interrupt, status 3, frame# 1044
kernel: usb-uhci.c: interrupt, status 3, frame# 668
kernel: usb-uhci.c: interrupt, status 3, frame# 1588
kernel: usb-uhci.c: interrupt, status 3, frame# 1836
kernel: usb-uhci.c: interrupt, status 3, frame# 708
kernel: usb-uhci.c: interrupt, status 3, frame# 1628
kernel: usb.c: USB disconnect on device 00:06.2-1 address 4
примерно таже картина при подключении флешки, второй порт на доке
работает нормально
порт накрылся или можно это победить?
С уважение, Валерий
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Comm] USB on IBM ThinkPad 570
2003-10-15 8:13 [Comm] USB on IBM ThinkPad 570 Shrek
@ 2003-10-15 12:58 ` Sergey Vlasov
2003-10-15 13:09 ` Shrek
0 siblings, 1 reply; 3+ messages in thread
From: Sergey Vlasov @ 2003-10-15 12:58 UTC (permalink / raw)
To: community
[-- Attachment #1: Type: text/plain, Size: 2068 bytes --]
On Wed, Oct 15, 2003 at 12:09:44PM +0400, Shrek wrote:
> В общем перестал работать usb на ноуте. При подключении мыши имеем следующее
>
> kernel: hub.c: new USB device 00:06.2-1, assigned address 2
> kernel: usb-uhci.c: interrupt, status 2, frame# 1333
> kernel: usb.c: USB device not accepting new address=2 (error=-110)
> kernel: hub.c: new USB device 00:06.2-1, assigned address 3
> kernel: usb.c: USB device not accepting new address=3 (error=-110)
> kernel: hub.c: new USB device 00:06.2-1, assigned address 4
> kernel: usb.c: USB device 4 (vend/prod 0x46d/0xc00e) is not claimed by
> any active driver.
> /etc/hotplug/usb.agent: Setup usbmouse hid for USB product 46d/c00e/1110
> kernel: usb.c: registered new driver usb_mouse
> kernel: usb-uhci.c: interrupt, status 2, frame# 692
> kernel: usb.c: error getting string descriptor 0 (error=-84)
> kernel: usb.c: error getting string descriptor 0 (error=-84)
> kernel: input0: USB HIDBP Mouse 046d:c00e on usb1:4.0
> kernel: usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
> kernel: usb.c: registered new driver hiddev
> kernel: usb.c: registered new driver hid
> kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
> kernel: hid-core.c: USB HID support drivers
> kernel: mice: PS/2 mouse device common for all mice
> kernel: usb-uhci.c: interrupt, status 3, frame# 124
> kernel: usb-uhci.c: interrupt, status 3, frame# 1044
> kernel: usb-uhci.c: interrupt, status 3, frame# 668
> kernel: usb-uhci.c: interrupt, status 3, frame# 1588
> kernel: usb-uhci.c: interrupt, status 3, frame# 1836
> kernel: usb-uhci.c: interrupt, status 3, frame# 708
> kernel: usb-uhci.c: interrupt, status 3, frame# 1628
> kernel: usb.c: USB disconnect on device 00:06.2-1 address 4
>
> примерно таже картина при подключении флешки, второй порт на доке
> работает нормально
> порт накрылся или можно это победить?
А ядро не обновляли? При загрузке со старным ядром то же самое?
Параметр acpi=off noapic nolapic не помогает? (Подобные ошибки
встречаются при неработающих прерываниях из-за проблем с ACPI.)
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Comm] USB on IBM ThinkPad 570
2003-10-15 12:58 ` Sergey Vlasov
@ 2003-10-15 13:09 ` Shrek
0 siblings, 0 replies; 3+ messages in thread
From: Shrek @ 2003-10-15 13:09 UTC (permalink / raw)
To: community
>>kernel: mice: PS/2 mouse device common for all mice
>>kernel: usb-uhci.c: interrupt, status 3, frame# 124
>>kernel: usb-uhci.c: interrupt, status 3, frame# 1044
>>kernel: usb-uhci.c: interrupt, status 3, frame# 668
>>kernel: usb-uhci.c: interrupt, status 3, frame# 1588
>>kernel: usb-uhci.c: interrupt, status 3, frame# 1836
>>kernel: usb-uhci.c: interrupt, status 3, frame# 708
>>kernel: usb-uhci.c: interrupt, status 3, frame# 1628
>>kernel: usb.c: USB disconnect on device 00:06.2-1 address 4
>>
>>примерно таже картина при подключении флешки, второй порт на доке
>>работает нормально
>>порт накрылся или можно это победить?
>>
>>
>
>А ядро не обновляли? При загрузке со старным ядром то же самое?
>Параметр acpi=off noapic nolapic не помогает? (Подобные ошибки
>встречаются при неработающих прерываниях из-за проблем с ACPI.)
>
>
>
>
на данный момент 2.4.20-alt5-up, устанавливал 2.4.22-std-up-alt5 и alt6
с acpi=off, не могает, к тому же на них перестает гружиться nsc-ircc
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2003-10-15 13:09 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-10-15 8:13 [Comm] USB on IBM ThinkPad 570 Shrek
2003-10-15 12:58 ` Sergey Vlasov
2003-10-15 13:09 ` Shrek
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git