* [Comm] Siemens M55 & GPRS trouble
@ 2003-09-30 11:43 Голубев Артем
2003-09-30 13:13 ` Wadik Eunap
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Голубев Артем @ 2003-09-30 11:43 UTC (permalink / raw)
To: community
Hi, Community.
Не могу настроить телефон из сабжа на работу с ГПРС в kppp.
Пытался и на МТС и на БиЛайне, в журнале kppp пишет вот что:
>ATZ
>OK
>
>AT+CGDCONT=1,"IP","internet.beeline.ru"
>OK
>
>ATD*99***1#
>OK
>
>CONNECT
далее идет набор символов, пишет "вход в сеть", дожидается таймаута и
начинается все сначала. Насколько я понимаю что то не так с
авторизацией или со сжатием ...
Помогите плз ...
Regards to All:)
***********************************
* *
* Golubev Artyom @ka IRoN *
* mailto : iron@students.ru *
* www : http://tver.host.sk *
* fido : temporary unavaiable *
* *
***********************************
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Comm] Siemens M55 & GPRS trouble
2003-09-30 11:43 [Comm] Siemens M55 & GPRS trouble Голубев Артем
@ 2003-09-30 13:13 ` Wadik Eunap
2003-09-30 13:16 ` Dmitry S Kiselev
2003-09-30 18:58 ` Shrek
2 siblings, 0 replies; 4+ messages in thread
From: Wadik Eunap @ 2003-09-30 13:13 UTC (permalink / raw)
To: community
В сообщении от Вторник 30 Сентябрь 2003 18:43 Голубев Артем написал(a):
>далее идет набор символов, пишет "вход в сеть", дожидается таймаута и
>начинается все сначала. Насколько я понимаю что то не так с
>авторизацией или со сжатием ...
>
>Помогите плз ...
>
>Regards to All:)
C kppp не пробывал, но можно через wvdial :)
Ставим аптом wvdial, если мопед не находится по команде wvdialconf, то создаем
etc/wvdial.conf
1. Откройте на редактирование файл /etc/wvdial.conf и впишите в него
примерно следующую секцию:
[Dialer Defaults]
# Порт, к которому подсоединен телефон
Modem = /dev/<your_device>
# Скорость порта
Baud = 115200
# Строка инициализации модема
Init1 = ATZ
## Следующие параметры вам необходимо уточнить у вашего оператора связи
## (указаные настройки - для оператора Beeline)
# Строка инициализации для использования GPRS
Init2 = AT+CGDCONT=1,"IP","internet.beeline.ru"
# Номер, по которому осуществляется соединение
Phone = *99#
# Имя пользователя
Username = beeline
# Пароль
Password = beeline
2. В вашем телефоне, в настройках GPRS, укажите точку доступа (APN).
Например, для Beeline это:
internet.beeline.ru
3. Укажите в файле /etc/resolv.conf адреса DNS-сервера вашего оператора, в
виде:
nameserver IP_адрес_сервера
4. Для того, чтобы запустить соединение выполните в терминале команду:
wvdial
:)
wbr,
Wadim Eunap
PSA QA Engineer
Plesk, Inc.
e-mail: veunap@plesk.ru
phone: +7.913.902.6613
ICQ UIN: 156660316
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Comm] Siemens M55 & GPRS trouble
2003-09-30 11:43 [Comm] Siemens M55 & GPRS trouble Голубев Артем
2003-09-30 13:13 ` Wadik Eunap
@ 2003-09-30 13:16 ` Dmitry S Kiselev
2003-09-30 18:58 ` Shrek
2 siblings, 0 replies; 4+ messages in thread
From: Dmitry S Kiselev @ 2003-09-30 13:16 UTC (permalink / raw)
To: community
On Tue, 30 Sep 2003 15:43:47 +0400
Голубев Артем <iron@students.ru> wrote:
> Hi, Community.
>
> Не могу настроить телефон из сабжа на работу с ГПРС в kppp.
> Пытался и на МТС и на БиЛайне, в журнале kppp пишет вот что:
У меня не сименс, но
>
> >ATZ
> >OK
> >
> >AT+CGDCONT=1,"IP","internet.beeline.ru"
^^
Вот тут можно попробовать без AT
> >OK
> >
> >ATD*99***1#
^^
Вот тут у меня kppp пишет "ATDP", по-моему.. Хотя не уверен.
Надо проверить.
--
WBR, Dmitry S Kiselev
E-Mail: kds@alawar.com
ICQ UIN: 32904426
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Comm] Siemens M55 & GPRS trouble
2003-09-30 11:43 [Comm] Siemens M55 & GPRS trouble Голубев Артем
2003-09-30 13:13 ` Wadik Eunap
2003-09-30 13:16 ` Dmitry S Kiselev
@ 2003-09-30 18:58 ` Shrek
2 siblings, 0 replies; 4+ messages in thread
From: Shrek @ 2003-09-30 18:58 UTC (permalink / raw)
To: community
Голубев Артем пишет:
>Hi, Community.
>
>Не могу настроить телефон из сабжа на работу с ГПРС в kppp.
>Пытался и на МТС и на БиЛайне, в журнале kppp пишет вот что:
>
>
>
>>ATZ
>>OK
>>
>>AT+CGDCONT=1,"IP","internet.beeline.ru"
>>OK
>>
>>ATD*99***1#
>>OK
>>
>>CONNECT
>>
>>
>
>далее идет набор символов, пишет "вход в сеть", дожидается таймаута и
>начинается все сначала. Насколько я понимаю что то не так с
>авторизацией или со сжатием ...
>
>Помогите плз ...
>
>
>
со сжатием. надо отключить сжатие заголовков айпи. у меня МТС, но это
ничего не меняет
в "Настройки аргументов pppd" (для kppp) пропиши
-----------------
lock
#отключаем сжатие заголовков IP
novj
#включаем отладку
debug
#логфайл pppd
/var/log/pppd.log
--------------------------
коментарии можно удалить, отладку и лог файл тоже
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2003-09-30 18:58 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-09-30 11:43 [Comm] Siemens M55 & GPRS trouble Голубев Артем
2003-09-30 13:13 ` Wadik Eunap
2003-09-30 13:16 ` Dmitry S Kiselev
2003-09-30 18:58 ` Shrek
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git