* [Comm] usb-printer
@ 2003-09-19 8:53 Vladislav
2003-09-19 7:15 ` [Comm] usb-printer Sergey Vlasov
2003-09-19 9:34 ` [Comm] usb-printer Dmytro O. Redchuk
0 siblings, 2 replies; 4+ messages in thread
From: Vladislav @ 2003-09-19 8:53 UTC (permalink / raw)
To: community
Доброго времени суток,
Как правильно настроить принтер, что-бы он при включении-выключении не пропадал.
Как прописать ему статичный адрес.
У меня получается следующая ситуация:
kernel: hub.c: new USB device 00:11.2-2, assigned address 2
kernel: printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0317
kernel: hub.c: USB disconect on device 00:11.2-2, assigned address 2
kernel: printer.c: usblp0: removed
....
kernel: hub.c: new USB device 00:11.2-2, assigned address 15
kernel: hub.c: USB disconect on device 00:11.2-2, assigned address 15
kernel: hub.c: new USB device 00:11.2-2, assigned address 16
kernel: usb_control/bulk_msg: timeout
И прекращает работать :(
--
С уважением Владислав
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Comm] Re: usb-printer
2003-09-19 8:53 [Comm] usb-printer Vladislav
@ 2003-09-19 7:15 ` Sergey Vlasov
2003-09-19 11:45 ` Vladislav
2003-09-19 9:34 ` [Comm] usb-printer Dmytro O. Redchuk
1 sibling, 1 reply; 4+ messages in thread
From: Sergey Vlasov @ 2003-09-19 7:15 UTC (permalink / raw)
To: community
[-- Attachment #1: Type: text/plain, Size: 1222 bytes --]
On Fri, 19 Sep 2003 11:53:37 +0300 Vladislav wrote:
> Доброго времени суток,
> Как правильно настроить принтер, что-бы он при включении-выключении не пропадал.
> Как прописать ему статичный адрес.
>
> У меня получается следующая ситуация:
>
> kernel: hub.c: new USB device 00:11.2-2, assigned address 2
> kernel: printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0317
>
> kernel: hub.c: USB disconect on device 00:11.2-2, assigned address 2
> kernel: printer.c: usblp0: removed
> ....
> kernel: hub.c: new USB device 00:11.2-2, assigned address 15
> kernel: hub.c: USB disconect on device 00:11.2-2, assigned address 15
>
> kernel: hub.c: new USB device 00:11.2-2, assigned address 16
> kernel: usb_control/bulk_msg: timeout
>
> И прекращает работать :(
Адрес тут не при чём - он и должен назначаться динамически, запретить
это нельзя.
Что за принтер, какое ядро? Какой USB-контроллер и драйвер
используется (grep usb </etc/modules.conf)?
Не совсем понятно, что вы имели в виду: если загрузиться при
включенном принтере - он работает, а после выключения и повторного
включения не работает?
Если есть другие USB-устройства - работают ли они?
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Comm] Re: usb-printer
2003-09-19 7:15 ` [Comm] usb-printer Sergey Vlasov
@ 2003-09-19 11:45 ` Vladislav
0 siblings, 0 replies; 4+ messages in thread
From: Vladislav @ 2003-09-19 11:45 UTC (permalink / raw)
To: community
Доброго времени суток Sergey
В ответ на "[Comm] Re: usb-printer" от Fri, 19 Sep 2003 11:15:00 +0400:
> On Fri, 19 Sep 2003 11:53:37 +0300 Vladislav wrote:
>
> > Доброго времени суток,
> > Как правильно настроить принтер, что-бы он при включении-выключении не пропадал.
> > Как прописать ему статичный адрес.
> >
> > У меня получается следующая ситуация:
> >
> > kernel: hub.c: new USB device 00:11.2-2, assigned address 2
> > kernel: printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0317
> >
> > kernel: hub.c: USB disconect on device 00:11.2-2, assigned address 2
> > kernel: printer.c: usblp0: removed
> > ....
> > kernel: hub.c: new USB device 00:11.2-2, assigned address 15
> > kernel: hub.c: USB disconect on device 00:11.2-2, assigned address 15
> >
> > kernel: hub.c: new USB device 00:11.2-2, assigned address 16
> > kernel: usb_control/bulk_msg: timeout
> >
> > И прекращает работать :(
>
> Адрес тут не при чём - он и должен назначаться динамически, запретить
> это нельзя.
>
> Что за принтер, какое ядро? Какой USB-контроллер и драйвер
> используется (grep usb </etc/modules.conf)?
>
> Не совсем понятно, что вы имели в виду: если загрузиться при
> включенном принтере - он работает, а после выключения и повторного
> включения не работает?
15 раз включается-выключается, а на 16 - не хочет
> Если есть другие USB-устройства - работают ли они?
Поторопился с вопросом - был не совсем корректно настроен hotplug.
Но спасибо за сочувствие.
--
С уважением Владислав
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Comm] usb-printer
2003-09-19 8:53 [Comm] usb-printer Vladislav
2003-09-19 7:15 ` [Comm] usb-printer Sergey Vlasov
@ 2003-09-19 9:34 ` Dmytro O. Redchuk
1 sibling, 0 replies; 4+ messages in thread
From: Dmytro O. Redchuk @ 2003-09-19 9:34 UTC (permalink / raw)
To: community
On Fri, Sep 19, 2003 at 11:53:37AM +0300, Vladislav wrote:
> Доброго времени суток,
> Как правильно настроить принтер, что-бы он при включении-выключении не пропадал.
> Как прописать ему статичный адрес.
>
> У меня получается следующая ситуация:
> kernel: hub.c: USB disconect on device 00:11.2-2, assigned address 2
> kernel: printer.c: usblp0: removed
> ....
(А какое ядро?) Попробуйте указать при загрузке `acpi=off' ?..
> И прекращает работать :(
>
> --
> С уважением Владислав
--
_,-=._ /|_/|
`-.} `=._,.-=-._., @ @._,
`._ _,-. ) _,.-'
` G.m-"^m`m' Dmytro O. Redchuk
Asynchronous inputs are at the root of our race problems.
-- D. Winker and F. Prosser
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2003-09-19 11:45 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-09-19 8:53 [Comm] usb-printer Vladislav
2003-09-19 7:15 ` [Comm] usb-printer Sergey Vlasov
2003-09-19 11:45 ` Vladislav
2003-09-19 9:34 ` [Comm] usb-printer Dmytro O. Redchuk
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git