From: Igor Solovyov <gosha@zkb.ru> To: Community <community@altlinux.ru> Subject: [Comm] IPSec problems Date: Fri, 8 Aug 2003 15:09:51 +0600 Message-ID: <20030808150951.4abd5592.gosha@zkb.ru> (raw) Hi All! Возникла проблема с использованием ipsec. Между двумя организациями установлен обычный тунель: # ifconfig tunl2 tunl2 Link encap:IPIP Tunnel HWaddr inet addr:10.0.13.2 P-t-P:10.0.13.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MTU:1480 Metric:1 Этот тунельный интерфейс и используется для ipsec: # cat /etc/ipsec.conf ....... config setup interfaces="ipsec0=tunl2" ....... # ifconfig ipsec0 ipsec0 Link encap:IPIP Tunnel HWaddr inet addr:10.0.13.2 Mask:255.255.255.255 UP RUNNING NOARP MTU:16260 Metric:1 ..... Установлены 5 коннектов: # ipsec eroute 1018 192.168.10.0/24 -> 192.168.31.0/24 => tun0x100d@10.0.13.1 0 192.168.62.0/24 -> 192.168.31.0/24 => tun0x1004@10.0.13.1 0 192.168.63.0/24 -> 192.168.31.0/24 => tun0x100e@10.0.13.1 14 192.168.64.0/24 -> 192.168.31.0/24 => tun0x1008@10.0.13.1 0 192.168.65.0/24 -> 192.168.31.0/24 => tun0x100a@10.0.13.1 Все работает нормально. Но время от времени часть соединений просто перестают работать. Причем именно часть, а не все. Обычно 3 или 4 из 5. Они не исчезают, их видно с помощью ipsec eroute как приведено выше, но фактически связи между соответсвующими сетями нет. В логах ничего криминального по этому поводу я не вижу. Помогает только service ipsec restart. Замечено, что перестают работать именно те коннекты, в которых некоторое время отсутствует активность. Т.е. если через какой- либо коннект идет работа, то он работать не перестает. Если же работы никакой нет, то через некоторое время этот коннект перестает работать совсем. Кто-нибудь боролся с таким? Помогите плиз. -- Best regards! Igor Solovyov System/network administrator JSC CB "Zlatkombank"
next reply other threads:[~2003-08-08 9:09 UTC|newest] Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top 2003-08-08 9:09 Igor Solovyov [this message] 2003-08-08 10:29 ` Dmitriy Gnidchenko 2003-08-08 12:32 ` Igor Solovyov 2003-08-08 12:57 ` Igor Solovyov 2003-08-08 13:46 ` artem 2003-08-08 12:52 ` Igor Solovyov 2003-08-08 13:06 ` Dmitriy Gnidchenko
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20030808150951.4abd5592.gosha@zkb.ru \ --to=gosha@zkb.ru \ --cc=community@altlinux.ru \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git