From: Evgeny Yugov <yugov@scs-900.ru> To: community@altlinux.ru Subject: [Comm] Настройка timings для fb... Date: Thu, 5 Jun 2003 15:18:58 +0700 Message-ID: <20030605151858.2cb63848.yugov@scs-900.ru> (raw) Вот, таки решился я... Первое с чем столкнулся: В конфиге /etc/X11/XF86Config-4: ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync (что за разрешение такое: 1024х480?) xvidtune при этом кажет: "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync Экран кажет нормально. При прописывании параметров от xvidtune в /etc/X11/XF86Config-4 Экран немного сдвинут... и xvidtune кажет: "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync Непонятки какие-то... 8-0 Далее попробовал с помощью videogen сгенерить timings для fbset... вышло так(это исходя из того что показывал xvidtune): $videogen -fb -m=1024x768 -mdc=94.50 -mvf=85 -mhf=68.68 Далее скормил это все fbset: $sudo fbset -g 1024 768 1024 768 8 -t 16276 192 32 35 2 32 3 Казец... экран потух... типа мода не совместимая... Отсюда кучка вопросов... как прописывать Modeline "правильно"... Как таки найтить параметры для fbset? P.S. Подробно то что кажет xvidtune: Pixel Clock (MHz) ... : 94.50 HDisplay............. : 1024 HSyncStart .......... : 1072 HSyncEnd ............ : 1168 HTotal .............. : 1376 VDisplay ............ : 768 VSyncStart .......... : 769 VSyncEnd ............ : 772 VTotal .............. : 808 flag ............. : 0x0005 Horizontal Sync (kHz) : 68.68 Vertical Sync (Hz) : 85.00 -- With Best regards, Evgeny Yugov, MTS, programmer of Advanced Technologies Departament. Registered Linux User #316667 mailto:yugov@scs-900.ru
next reply other threads:[~2003-06-05 8:18 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2003-06-05 8:18 Evgeny Yugov [this message] 2003-06-05 9:00 ` Evgeny Yugov 2003-06-06 14:23 ` [Comm] " Alexey Tourbin 2003-06-09 3:14 ` [Comm] " Evgeny Yugov
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20030605151858.2cb63848.yugov@scs-900.ru \ --to=yugov@scs-900.ru \ --cc=community@altlinux.ru \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git