* [Comm] LTSP @ 2003-05-06 17:49 Dennis Fedotov 2003-05-06 18:11 ` [Comm] LTSP Konstantin Lepikhov 2003-05-07 10:37 ` [Comm] LTSP Sergey A. Kolesnitchenko 0 siblings, 2 replies; 12+ messages in thread From: Dennis Fedotov @ 2003-05-06 17:49 UTC (permalink / raw) To: ALT Linux community Привет, Кому под М2.2 удавалось запустить LTSP? Поделитесь опытом, пожалуйста. Интересует можно ли это сделать в 10Мбит сети на картах rtl8019/rtl8029 (вроде etherboot поддерживается) т.к. на rom-o-matic.net кажется только для 100Мбит-ных. Клиенты естественно слабенькие: Р-100, 16М ОЗУ. -- Rgrds, Dennis Fedotov ^ permalink raw reply [flat|nested] 12+ messages in thread
* [Comm] Re: LTSP 2003-05-06 17:49 [Comm] LTSP Dennis Fedotov @ 2003-05-06 18:11 ` Konstantin Lepikhov 2003-05-07 8:25 ` Anatoly A. Yakushin 2003-05-07 12:09 ` Michael Shigorin 2003-05-07 10:37 ` [Comm] LTSP Sergey A. Kolesnitchenko 1 sibling, 2 replies; 12+ messages in thread From: Konstantin Lepikhov @ 2003-05-06 18:11 UTC (permalink / raw) To: community Hi Dennis! Tuesday 06, at 08:49:09 PM you wrote: > Привет, > Кому под М2.2 удавалось запустить LTSP? Поделитесь опытом, пожалуйста. > Интересует можно ли это сделать в 10Мбит сети на картах rtl8019/rtl8029 > (вроде etherboot поддерживается) т.к. на rom-o-matic.net кажется только для > 100Мбит-ных. Клиенты естественно слабенькие: Р-100, 16М ОЗУ. Не знаю насчет LTSP, у нас успешно работает pxes (pxes.sf.net). Машинки тоже не ахти какие (правда, там 32Mb минимум надо). Зато никаких извратов с etherboot - покупается обычная PILA от Intel, и по PXE все прекрасно работает (в т.ч и как w2k client). А все эти пляски с гадостью на 8029, это для извращенцов имхо... PS xserver для pxes терминалов - как раз досизифленый Master 2.2. Если интересно, могу выслать конфиги для dhcpd/tftpd + srpms для сборки pxes. -- WBR, Konstantin chat with ==>ICQ: 109916175 Lepikhov, speak to ==>JID: lakostis@jabber.org aka L.A. Kostis write to ==>mailto:lakostis@pisem.net.nospam ...The information is like the bank... (c) EC8OR ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] Re: LTSP 2003-05-06 18:11 ` [Comm] LTSP Konstantin Lepikhov @ 2003-05-07 8:25 ` Anatoly A. Yakushin 2003-05-08 19:22 ` Konstantin Lepikhov 2003-05-07 12:09 ` Michael Shigorin 1 sibling, 1 reply; 12+ messages in thread From: Anatoly A. Yakushin @ 2003-05-07 8:25 UTC (permalink / raw) To: community Konstantin Lepikhov пишет: > Hi Dennis! > > Tuesday 06, at 08:49:09 PM you wrote: > > <skip> > PS xserver для pxes терминалов - как раз досизифленый Master 2.2. Если > интересно, могу выслать конфиги для dhcpd/tftpd + srpms для сборки pxes. > Очень интересно. И мне тоже, pls -- Rgrds, Anatoly A. Yakushin aka DOC Orthopaedic Departmens Veterans Hospital # 3 Moscow ^ permalink raw reply [flat|nested] 12+ messages in thread
* [Comm] Re: LTSP 2003-05-07 8:25 ` Anatoly A. Yakushin @ 2003-05-08 19:22 ` Konstantin Lepikhov 0 siblings, 0 replies; 12+ messages in thread From: Konstantin Lepikhov @ 2003-05-08 19:22 UTC (permalink / raw) To: community Hi Anatoly! Wednesday 07, at 12:25:49 PM you wrote: > Konstantin Lepikhov пишет: > >Hi Dennis! > > > >Tuesday 06, at 08:49:09 PM you wrote: > > > > > <skip> > >PS xserver для pxes терминалов - как раз досизифленый Master 2.2. Если > >интересно, могу выслать конфиги для dhcpd/tftpd + srpms для сборки pxes. > > > Очень интересно. И мне тоже, pls > http://www.elektrostal.ru/~lakostis/RPMS/pxes/ - configs - конфиги, которые у меня работают - fixes - просто скопируйте эти файлы после установки pxes-base. pxes-base берете с pxes.sf.net pxesconfig с http://www.elektrostal.ru/~lakostis/RPMS последний fix - ln -s /var/lib/tftpboot /tftpboot документацию по использованию/конфигурированию - pxes.sf.net -- WBR, Konstantin chat with ==>ICQ: 109916175 Lepikhov, speak to ==>JID: lakostis@jabber.org aka L.A. Kostis write to ==>mailto:lakostis@pisem.net.nospam ...The information is like the bank... (c) EC8OR ^ permalink raw reply [flat|nested] 12+ messages in thread
* [Comm] Re: LTSP 2003-05-06 18:11 ` [Comm] LTSP Konstantin Lepikhov 2003-05-07 8:25 ` Anatoly A. Yakushin @ 2003-05-07 12:09 ` Michael Shigorin 2003-05-07 12:46 ` Dennis Fedotov 2003-05-08 18:58 ` Konstantin Lepikhov 1 sibling, 2 replies; 12+ messages in thread From: Michael Shigorin @ 2003-05-07 12:09 UTC (permalink / raw) To: community On Tue, May 06, 2003 at 10:11:29PM +0400, Konstantin Lepikhov wrote: > > Кому под М2.2 удавалось запустить LTSP? Поделитесь опытом, пожалуйста. http://ltsp.ru -- и там же в ltsp-ru-discuss можно и пообщаться. > Зато никаких извратов с etherboot - покупается обычная PILA от > Intel, и по PXE все прекрасно работает (в т.ч и как w2k > client). А все эти пляски с гадостью на 8029, это для > извращенцов имхо... Не-не, не обычная пила, а проверенная в деле. Потому что в немалом количестве езерекспрессов PXE _убит_ *нафиг*. И вот уж там -- точно пляски для извращенцев, потому что догадаться, что у авторов стандарта оно неживое -- сперва трудновато. Выглядит как многократно спрашиваемые параметры по DHCP, которые отдаются сервером, но упорно игнорируются. Выводы: проверять перед тем как. -- ---- WBR, Michael Shigorin <mike@altlinux.ru> ------ Linux.Kiev http://www.linux.kiev.ua/ ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] Re: LTSP 2003-05-07 12:09 ` Michael Shigorin @ 2003-05-07 12:46 ` Dennis Fedotov 2003-05-07 20:37 ` Ablamsky Taras 2003-05-08 19:00 ` Konstantin Lepikhov 2003-05-08 18:58 ` Konstantin Lepikhov 1 sibling, 2 replies; 12+ messages in thread From: Dennis Fedotov @ 2003-05-07 12:46 UTC (permalink / raw) To: community В сообщении от 7 Май 2003 15:09 Michael Shigorin написал(a): > On Tue, May 06, 2003 at 10:11:29PM +0400, Konstantin Lepikhov wrote: > > > Кому под М2.2 удавалось запустить LTSP? Поделитесь опытом, пожалуйста. > > http://ltsp.ru -- и там же в ltsp-ru-discuss можно и пообщаться. За ссылку спасибо, > > Зато никаких извратов с etherboot - покупается обычная PILA от > > Intel, и по PXE все прекрасно работает (в т.ч и как w2k Но как я понял с 10Мбитной сетью это не пройдет или никто не пробовал? И к сожалению, пока нет возможности добавить память у клиентов.:( Легче на 100Мбит перейти.:) Кстати, кто какой hub/switch (на 16 портов) порекомендует? -- Rgds, Dennis Fedotov ^ permalink raw reply [flat|nested] 12+ messages in thread
* [Comm] Re: LTSP 2003-05-07 12:46 ` Dennis Fedotov @ 2003-05-07 20:37 ` Ablamsky Taras 2003-05-08 9:39 ` Dennis Fedotov 2003-05-08 19:00 ` Konstantin Lepikhov 1 sibling, 1 reply; 12+ messages in thread From: Ablamsky Taras @ 2003-05-07 20:37 UTC (permalink / raw) To: community On Wed, May 07, 2003 at 03:46:01PM +0300, Dennis Fedotov wrote: > Но как я понял с 10Мбитной сетью это не пройдет или никто не пробовал? И к У нас железный Х-терминал работает на коаксиале и нормально. Пробуйте, может и получиться. > сожалению, пока нет возможности добавить память у клиентов.:( Легче на 16Mb вполне должно хватить. -- taras ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] Re: LTSP 2003-05-07 20:37 ` Ablamsky Taras @ 2003-05-08 9:39 ` Dennis Fedotov 2003-05-08 19:24 ` Pavel Tsybulin 0 siblings, 1 reply; 12+ messages in thread From: Dennis Fedotov @ 2003-05-08 9:39 UTC (permalink / raw) To: community В сообщении от 7 Май 2003 23:37 Ablamsky Taras написал(a): > On Wed, May 07, 2003 at 03:46:01PM +0300, Dennis Fedotov wrote: > > Но как я понял с 10Мбитной сетью это не пройдет или никто не пробовал? И > > к > > У нас железный Х-терминал работает на коаксиале и нормально. > Пробуйте, может и получиться. Если можно поподробнее что за железный терминал. > > сожалению, пока нет возможности добавить память у клиентов.:( Легче на > > 16Mb вполне должно хватить. А etherboot под какую карточку компилировали? -- Rgds, Dennis Fedotov ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] Re: LTSP 2003-05-08 9:39 ` Dennis Fedotov @ 2003-05-08 19:24 ` Pavel Tsybulin 0 siblings, 0 replies; 12+ messages in thread From: Pavel Tsybulin @ 2003-05-08 19:24 UTC (permalink / raw) To: community On Thursday 08 May 2003 13:39, Dennis Fedotov wrote: > В сообщении от 7 Май 2003 23:37 Ablamsky Taras написал(a): > > On Wed, May 07, 2003 at 03:46:01PM +0300, Dennis Fedotov wrote: > > > Но как я понял с 10Мбитной сетью это не пройдет или никто не пробовал? > > > И к > > > > У нас железный Х-терминал работает на коаксиале и нормально. > > Пробуйте, может и получиться. > > Если можно поподробнее что за железный терминал. У меня IBM Xstation-130 на 10-ти мегабитах пасется - нормально, узким местом тут не сеть, а сам терминал (у него 80186 внутрях процессором служит), а вот обычный DX4-100 32м озу и с видюхой S3Trio 1024x768x16 на этой-же сетке и pxes в качестве софта - заметно быстрее. Так что 10-ки хватит вполне. > > > > сожалению, пока нет возможности добавить память у клиентов.:( Легче на > > > > 16Mb вполне должно хватить. > > А etherboot под какую карточку компилировали? на pxes-е стоит RTL-8029, грузится через etherboot взятый с rom-o-matic Pavel ^ permalink raw reply [flat|nested] 12+ messages in thread
* [Comm] Re: LTSP 2003-05-07 12:46 ` Dennis Fedotov 2003-05-07 20:37 ` Ablamsky Taras @ 2003-05-08 19:00 ` Konstantin Lepikhov 1 sibling, 0 replies; 12+ messages in thread From: Konstantin Lepikhov @ 2003-05-08 19:00 UTC (permalink / raw) To: community Hi Dennis! Wednesday 07, at 03:46:01 PM you wrote: > В сообщении от 7 Май 2003 15:09 Michael Shigorin написал(a): > > On Tue, May 06, 2003 at 10:11:29PM +0400, Konstantin Lepikhov wrote: > > > > Кому под М2.2 удавалось запустить LTSP? Поделитесь опытом, пожалуйста. > > > > http://ltsp.ru -- и там же в ltsp-ru-discuss можно и пообщаться. > За ссылку спасибо, > > > Зато никаких извратов с etherboot - покупается обычная PILA от > > > Intel, и по PXE все прекрасно работает (в т.ч и как w2k > Но как я понял с 10Мбитной сетью это не пройдет или никто не пробовал? И к > сожалению, пока нет возможности добавить память у клиентов.:( Легче на > 100Мбит перейти.:) > Кстати, кто какой hub/switch (на 16 портов) порекомендует? на 10 тоже можно, но видео не посмотришь =) Насчет хабов - лучше switch, у нас вроде compex'овские стоят. -- WBR, Konstantin chat with ==>ICQ: 109916175 Lepikhov, speak to ==>JID: lakostis@jabber.org aka L.A. Kostis write to ==>mailto:lakostis@pisem.net.nospam ...The information is like the bank... (c) EC8OR ^ permalink raw reply [flat|nested] 12+ messages in thread
* [Comm] Re: LTSP 2003-05-07 12:09 ` Michael Shigorin 2003-05-07 12:46 ` Dennis Fedotov @ 2003-05-08 18:58 ` Konstantin Lepikhov 1 sibling, 0 replies; 12+ messages in thread From: Konstantin Lepikhov @ 2003-05-08 18:58 UTC (permalink / raw) To: community Hi Michael! Wednesday 07, at 03:09:54 PM you wrote: > On Tue, May 06, 2003 at 10:11:29PM +0400, Konstantin Lepikhov wrote: > > > Кому под М2.2 удавалось запустить LTSP? Поделитесь опытом, пожалуйста. > > http://ltsp.ru -- и там же в ltsp-ru-discuss можно и пообщаться. > > > Зато никаких извратов с etherboot - покупается обычная PILA от > > Intel, и по PXE все прекрасно работает (в т.ч и как w2k > > client). А все эти пляски с гадостью на 8029, это для > > извращенцов имхо... > > Не-не, не обычная пила, а проверенная в деле. Ессно, мы других не покупаем ;-) > > Потому что в немалом количестве езерекспрессов PXE _убит_ > *нафиг*. И вот уж там -- точно пляски для извращенцев, потому "немалое количество" - это сколько? > что догадаться, что у авторов стандарта оно неживое -- сперва > трудновато. Выглядит как многократно спрашиваемые параметры по > DHCP, которые отдаются сервером, но упорно игнорируются. > > Выводы: проверять перед тем как. > Ээээ очень мудрый вывод :) Зато в PILA есть flash :) А в провереном глюкалове под названием 8029 этого счастья не предвидится (дискетка не катит, это же дорого - дисковод по стоимости - одна PILA как раз) + кто умеет делать на 8029 100Mbit? Потом, pxes работает "из коробки": не надо ничего прошивать, поднимаете tftpd+dhcpd, конфигурите гуевой pxesconfig нужный image (там даже nbi есть) и работаете. Единственная трабла, которая мне пока мешает - глючит flash с комбинацией XF4.3/XF3.3.6. А теперь посмотрим на связку therboot+ltsp... PS Поздравляю всех с прошедшим Днем Радио! -- WBR, Konstantin chat with ==>ICQ: 109916175 Lepikhov, speak to ==>JID: lakostis@jabber.org aka L.A. Kostis write to ==>mailto:lakostis@pisem.net.nospam ...The information is like the bank... (c) EC8OR ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Comm] LTSP 2003-05-06 17:49 [Comm] LTSP Dennis Fedotov 2003-05-06 18:11 ` [Comm] LTSP Konstantin Lepikhov @ 2003-05-07 10:37 ` Sergey A. Kolesnitchenko 1 sibling, 0 replies; 12+ messages in thread From: Sergey A. Kolesnitchenko @ 2003-05-07 10:37 UTC (permalink / raw) To: Dennis Fedotov Hello Dennis, Tuesday, May 6, 2003, 9:49:09 PM, you wrote: DF> Привет, DF> Кому под М2.2 удавалось запустить LTSP? Поделитесь опытом, пожалуйста. DF> Интересует можно ли это сделать в 10Мбит сети на картах rtl8019/rtl8029 DF> (вроде etherboot поддерживается) т.к. на rom-o-matic.net кажется только для DF> 100Мбит-ных. Клиенты естественно слабенькие: Р-100, 16М ОЗУ. Уважаемые коллеги! Вопрос немножко не в тему. А кто-ниубдь занимался отрендериванием видео или сцен из макса, майи или аналогов по сетке? Если да поделитесь опытом пожалуйста на каком оборудование и какими рендерами пользовались. Спасибо. -- Best regards, Sergey mailto:sergey.ak@mtu-net.ru ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2003-05-08 19:24 UTC | newest] Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2003-05-06 17:49 [Comm] LTSP Dennis Fedotov 2003-05-06 18:11 ` [Comm] LTSP Konstantin Lepikhov 2003-05-07 8:25 ` Anatoly A. Yakushin 2003-05-08 19:22 ` Konstantin Lepikhov 2003-05-07 12:09 ` Michael Shigorin 2003-05-07 12:46 ` Dennis Fedotov 2003-05-07 20:37 ` Ablamsky Taras 2003-05-08 9:39 ` Dennis Fedotov 2003-05-08 19:24 ` Pavel Tsybulin 2003-05-08 19:00 ` Konstantin Lepikhov 2003-05-08 18:58 ` Konstantin Lepikhov 2003-05-07 10:37 ` [Comm] LTSP Sergey A. Kolesnitchenko
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git