From: Alexander Kharkov <shurik2k@hotbox.ru>
To: community@altlinux.ru
Subject: Re: [Comm] Как подмонтировподмонтировать USB драйв EasyhardDisk EB2000GA
Date: Mon, 31 Mar 2003 01:46:39 +0400
Message-ID: <200303310146.39133.shurik2k@hotbox.ru> (raw)
In-Reply-To: <1048895070.2654.5.camel@golovin.home>
В сообщении от 29 Март 2003 02:44 Andrey Golovin написал(a):
> В Sat, 29.03.2003, в 00:53, Alexander Kharkov написал:
> > Сабж в общем то :-)
> > уже все перепробовал - usbview говорит - мол есть такая партия
> > просмотр из-под kde говорит что неизвестное устройство
> > драйвер scsi_hostadapter и usb-stirage есть (все сделал как на
> > www.atmsk.ru написано
> > но не хочет работать :-(((
> >
> > приходится из-за него в оффтопик перегружаться....
> >
> > причем FLash работает нормально
>
> А что говорит cat /proc/bus/usb/devices? Я понимаю, что usbview именно
> его и показывает, но всё-таки, что конкретно.
[alexander@localhost alexander]$ cat /proc/bus/usb/devices
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.04
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 22/900 us ( 2%), #Int= 2, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 4
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=04e1 ProdID=0201 Rev= 1.10
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 10 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=03f0 ProdID=0205 Rev= 0.00
S: Manufacturer=Hewlett-Packard
S: Product=HP ScanJet 3300C
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 48mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=10(unk. ) Sub=01 Prot=00 Driver=usbscanner
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=8ms
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 11 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=05e3 ProdID=0702 Rev= 1.13
S: Product=USB Storage Device
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
вот собственно....
--
-----------------
Всех благ, Alexander
next prev parent reply other threads:[~2003-03-30 21:46 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-03-28 21:53 [Comm] Как подмонтировать " Alexander Kharkov
2003-03-28 22:20 ` [Comm] Как подмонтировподмонтировать " Alex Khroustalev
2003-03-30 21:41 ` Alexander Kharkov
2003-03-28 23:44 ` Andrey Golovin
2003-03-30 21:46 ` Alexander Kharkov [this message]
2003-03-30 21:03 ` [Comm] Как подмонтировподмонтировподмонтировать " Alex Khroustalev
2003-03-31 10:42 ` [Comm] Как подмонтировать " georginus
2003-04-01 4:42 ` Alexander Kharkov
2003-04-01 5:12 ` Sergey S. Skulachenko
2003-04-07 6:43 ` [Comm] " georginus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200303310146.39133.shurik2k@hotbox.ru \
--to=shurik2k@hotbox.ru \
--cc=community@altlinux.ru \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git