* [Comm] master-2.2 and LVM
@ 2003-03-14 8:38 Владимир
2003-03-14 9:16 ` vic ismakaev
2003-03-14 12:57 ` Владимир
0 siblings, 2 replies; 5+ messages in thread
From: Владимир @ 2003-03-14 8:38 UTC (permalink / raw)
To: community
Привет всем.
Стал тестировать LVM на новом дистрибутиве.
Выполнение команды vgscan сопровождается
руганью:
Can't locate module block-major-43
Нет разницы, был или небыл перед этим загружен
модуль lvm-mod. В конечном итоге все отрабатывает,
но, за master-2.0 такого не водилось (или внимания
не привлекло?). Кто нибудь подскажет, где и что нужно
подправить, чтобы подобного не было?
Как и раньше на master-2.0, в rc.sysinit инициализация
LVM происходит до монтирования корневой файловой
системы в режим чтение-запись и без использования
vgscan. Считаю это не совсем правильным, поскольку
может вызвать проблемы при загрузке (если вносились
изменения в тома и они не были явно зафиксированы
перед перезагрузкой).
--
Best regards
Vladimir
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Comm] master-2.2 and LVM
2003-03-14 8:38 [Comm] master-2.2 and LVM Владимир
@ 2003-03-14 9:16 ` vic ismakaev
2003-03-14 12:57 ` Владимир
1 sibling, 0 replies; 5+ messages in thread
From: vic ismakaev @ 2003-03-14 9:16 UTC (permalink / raw)
To: community
14 Март 2003 13:38, Владимир написал:
> Привет всем.
>
> Стал тестировать LVM на новом дистрибутиве.
> Выполнение команды vgscan сопровождается
> руганью:
>
> Can't locate module block-major-43
>
> Нет разницы, был или небыл перед этим загружен
> модуль lvm-mod. В конечном итоге все отрабатывает,
> но, за master-2.0 такого не водилось (или внимания
> не привлекло?). Кто нибудь подскажет, где и что нужно
> подправить, чтобы подобного не было?
>
> Как и раньше на master-2.0, в rc.sysinit инициализация
> LVM происходит до монтирования корневой файловой
> системы в режим чтение-запись и без использования
> vgscan. Считаю это не совсем правильным, поскольку
> может вызвать проблемы при загрузке (если вносились
> изменения в тома и они не были явно зафиксированы
> перед перезагрузкой).
Посмотрите тред "LVM" от 11.11.02. Там приводился патч для rc.sysinit.
Может это Вам чем то поможет.
--
С уважением
Виктор В Исмакаев
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Comm] master-2.2 and LVM
2003-03-14 8:38 [Comm] master-2.2 and LVM Владимир
2003-03-14 9:16 ` vic ismakaev
@ 2003-03-14 12:57 ` Владимир
2003-03-18 13:48 ` Владимир
1 sibling, 1 reply; 5+ messages in thread
From: Владимир @ 2003-03-14 12:57 UTC (permalink / raw)
To: community
Владимир пишет:
> Привет всем.
>
> Стал тестировать LVM на новом дистрибутиве.
> Выполнение команды vgscan сопровождается
> руганью:
>
> Can't locate module block-major-43
>
> Нет разницы, был или небыл перед этим загружен
> модуль lvm-mod. В конечном итоге все отрабатывает,
> но, за master-2.0 такого не водилось (или внимания
> не привлекло?). Кто нибудь подскажет, где и что нужно
> подправить, чтобы подобного не было?
Отвечаю сам себе.
Ошибок с block-major-43 появляется ровно 32
В /dev находится ровно 32 устройства nb*
vgscan -d | grep '/dev/nb'
показывает ровно 32 запроса на сканирование
Network Block Device
В /usr/share/doc/lvm-1.0.6/CHANGELOG сказано,
что поддержка LVM на этом "чуде" реализована начиная
с версии 1.0.4 (в master-2.0 версия 0.9)
А драйвера для этой штуки modprobe найти не может.
(а мне это надо?)
>
> Как и раньше на master-2.0, в rc.sysinit инициализация
> LVM происходит до монтирования корневой файловой
> системы в режим чтение-запись и без использования
> vgscan. Считаю это не совсем правильным, поскольку
> может вызвать проблемы при загрузке (если вносились
> изменения в тома и они не были явно зафиксированы
> перед перезагрузкой).
>
--
Best regards
Vladimir
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Comm] master-2.2 and LVM
2003-03-14 12:57 ` Владимир
@ 2003-03-18 13:48 ` Владимир
2003-03-18 21:15 ` Dmitry V. Levin
0 siblings, 1 reply; 5+ messages in thread
From: Владимир @ 2003-03-18 13:48 UTC (permalink / raw)
To: community
Владимир пишет:
> Владимир пишет:
>
>> Привет всем.
>>
>> Стал тестировать LVM на новом дистрибутиве.
>> Выполнение команды vgscan сопровождается
>> руганью:
>>
>> Can't locate module block-major-43
>>
>> Нет разницы, был или небыл перед этим загружен
>> модуль lvm-mod. В конечном итоге все отрабатывает,
>> но, за master-2.0 такого не водилось (или внимания
>> не привлекло?). Кто нибудь подскажет, где и что нужно
>> подправить, чтобы подобного не было?
>
>
>
> Отвечаю сам себе.
> Ошибок с block-major-43 появляется ровно 32
> В /dev находится ровно 32 устройства nb*
> vgscan -d | grep '/dev/nb'
> показывает ровно 32 запроса на сканирование
> Network Block Device
>
> В /usr/share/doc/lvm-1.0.6/CHANGELOG сказано,
> что поддержка LVM на этом "чуде" реализована начиная
> с версии 1.0.4 (в master-2.0 версия 0.9)
>
> А драйвера для этой штуки modprobe найти не может.
> (а мне это надо?)
>
Убрать вывод ошибок удалось через удаление под
/dev всех устройств nb{N}
>>
>> Как и раньше на master-2.0, в rc.sysinit инициализация
>> LVM происходит до монтирования корневой файловой
>> системы в режим чтение-запись и без использования
>> vgscan. Считаю это не совсем правильным, поскольку
>> может вызвать проблемы при загрузке (если вносились
>> изменения в тома и они не были явно зафиксированы
>> перед перезагрузкой).
>>
>
>
--
Best regards
Vladimir
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Comm] master-2.2 and LVM
2003-03-18 13:48 ` Владимир
@ 2003-03-18 21:15 ` Dmitry V. Levin
0 siblings, 0 replies; 5+ messages in thread
From: Dmitry V. Levin @ 2003-03-18 21:15 UTC (permalink / raw)
To: ALT Linux general discussion list
[-- Attachment #1: Type: text/plain, Size: 1066 bytes --]
On Tue, Mar 18, 2003 at 04:48:41PM +0300, Владимир wrote:
> >>Привет всем.
> >>
> >>Стал тестировать LVM на новом дистрибутиве.
> >>Выполнение команды vgscan сопровождается
> >>руганью:
> >>
> >>Can't locate module block-major-43
> >>
> >>Нет разницы, был или небыл перед этим загружен
> >>модуль lvm-mod. В конечном итоге все отрабатывает,
> >>но, за master-2.0 такого не водилось (или внимания
> >>не привлекло?). Кто нибудь подскажет, где и что нужно
> >>подправить, чтобы подобного не было?
> >
> >Отвечаю сам себе.
> >Ошибок с block-major-43 появляется ровно 32
> >В /dev находится ровно 32 устройства nb*
> >vgscan -d | grep '/dev/nb'
> >показывает ровно 32 запроса на сканирование
> >Network Block Device
> >
> >В /usr/share/doc/lvm-1.0.6/CHANGELOG сказано,
> >что поддержка LVM на этом "чуде" реализована начиная
> >с версии 1.0.4 (в master-2.0 версия 0.9)
> >
> >А драйвера для этой штуки modprobe найти не может.
> >(а мне это надо?)
>
> Убрать вывод ошибок удалось через удаление под
> /dev всех устройств nb{N}
А более логичного способа нет?
--
ldv
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2003-03-18 21:15 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-03-14 8:38 [Comm] master-2.2 and LVM Владимир
2003-03-14 9:16 ` vic ismakaev
2003-03-14 12:57 ` Владимир
2003-03-18 13:48 ` Владимир
2003-03-18 21:15 ` Dmitry V. Levin
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git