* [Comm] IMB DTLA-305030 & hdparm settings
@ 2003-02-26 8:36 Andrey Brindeew
2003-02-26 8:45 ` Korshunov Ilya
2003-02-27 13:01 ` [Comm] " Michael Shigorin
0 siblings, 2 replies; 18+ messages in thread
From: Andrey Brindeew @ 2003-02-26 8:36 UTC (permalink / raw)
To: ALT Linux community
[-- Attachment #1: Type: text/plain, Size: 1803 bytes --]
Hi!
Решил заняться тонким тюнингом своего HDD.
Исходные данные:
* MB: ASUS TUSL2-C (i815)
* HDD: IBM DTLA-305030 (5400 RPM)
Сейчас он сконфигурирован следующим образом:
$ sudo hdparm /dev/hda
Password:
/dev/hda:
multcount = 16 (on)
I/O support = 3 (32-bit w/sync)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
nowerr = 0 (off)
readonly = 0 (off)
readahead = 8 (on)
geometry = 3737/255/63, sectors = 60036480, start = 0
busstate = 1 (on)
Тест на чтение, выполненный в runlevel 1:
# hdparm -tT /dev/hda
/dev/hda:
Timing buffer-cache reads: 128 MB in 1.01 seconds =126.73 MB/sec
Timing buffered disk reads: 64 MB in 2.16 seconds = 29.63 MB/sec
Настройки:
$ cat /etc/sysconfig/harddisk/hda
USE_DMA=1
MULTIPLE_IO=16
EIDE_32BIT=1
LOOKAHEAD=1
EXTRA_PARAMS=-X69u1c3
$ sudo hdparm -i /dev/hda
/dev/hda:
Model=IBM-DTLA-305030, FwRev=TW3OA60A, SerialNo=YGEYG086812
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40
BuffType=DualPortCache, BuffSize=380kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=60036480
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive Supports : ATA/ATAPI-5 T13 1321D revision 1 : ATA-2 ATA-3 ATA-4 ATA-5
Вопрос следующий: из моего винта что-то еще можно выжать дополнительно
или достигнутые настройки оптимальны по производительности? Субъективно
мне иногда кажется, что винт работает чрезвычайно медленно при
swapping'е.
--
WBR, Andrey Brindeew.
"No one person can understand Perl culture completely"
(C) Larry Wall.
[-- Attachment #2: Type: application/pgp-signature, Size: 245 bytes --]
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [Comm] IMB DTLA-305030 & hdparm settings
2003-02-26 8:36 [Comm] IMB DTLA-305030 & hdparm settings Andrey Brindeew
@ 2003-02-26 8:45 ` Korshunov Ilya
2003-02-26 9:03 ` Maxim Tyurin
` (3 more replies)
2003-02-27 13:01 ` [Comm] " Michael Shigorin
1 sibling, 4 replies; 18+ messages in thread
From: Korshunov Ilya @ 2003-02-26 8:45 UTC (permalink / raw)
To: community
> Вопрос следующий: из моего винта что-то еще можно выжать дополнительно
> или достигнутые настройки оптимальны по производительности?
> Субъективно мне иногда кажется, что винт работает чрезвычайно медленно
> при swapping'е.
>
А он udma100 ? Если да то маловато....
у меня
/dev/hda:
Timing buffer-cache reads: 128 MB in 0.76 seconds =168.42 MB/sec
Timing buffered disk reads: 64 MB in 1.72 seconds = 37.21 MB/sec
----
Best Regards
Korshunov Ilya
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [Comm] IMB DTLA-305030 & hdparm settings
2003-02-26 8:45 ` Korshunov Ilya
@ 2003-02-26 9:03 ` Maxim Tyurin
2003-02-26 9:31 ` Korshunov Ilya
2003-02-26 15:00 ` Denis S. Filimonov
2003-02-26 9:07 ` Andrey Brindeew
` (2 subsequent siblings)
3 siblings, 2 replies; 18+ messages in thread
From: Maxim Tyurin @ 2003-02-26 9:03 UTC (permalink / raw)
To: community
On Wed, Feb 26, 2003 at 11:45:57AM +0300, Korshunov Ilya wrote:
> > Вопрос следующий: из моего винта что-то еще можно выжать дополнительно
> > или достигнутые настройки оптимальны по производительности?
> > Субъективно мне иногда кажется, что винт работает чрезвычайно медленно
> > при swapping'е.
> >
>
> А он udma100 ? Если да то маловато....
> у меня
>
>
> /dev/hda:
> Timing buffer-cache reads: 128 MB in 0.76 seconds =168.42 MB/sec
> Timing buffered disk reads: 64 MB in 1.72 seconds = 37.21 MB/sec
Тоже маловато
/dev/hda:
Timing buffer-cache reads: 128 MB in 0.36 seconds =355.56 MB/sec
Timing buffered disk reads: 64 MB in 1.47 seconds = 43.54 MB/sec
Это WesternDigital JB
/dev/hda:
multcount = 0 (off)
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 8 (on)
geometry = 9729/255/63, sectors = 156301488, start = 0
--
With Best Regards, Maxim Tyurin
mailto: MrKooll@mail.ru
JID: MrKooll@jabber.pibhe.com
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [Comm] IMB DTLA-305030 & hdparm settings
2003-02-26 9:03 ` Maxim Tyurin
@ 2003-02-26 9:31 ` Korshunov Ilya
2003-02-26 15:00 ` Denis S. Filimonov
1 sibling, 0 replies; 18+ messages in thread
From: Korshunov Ilya @ 2003-02-26 9:31 UTC (permalink / raw)
To: community
On Wed, 26 Feb 2003 11:03:50 +0200
Maxim Tyurin <mrkooll@tdr.pibhe.com> wrote:
> /dev/hda:
> Timing buffer-cache reads: 128 MB in 0.36 seconds =355.56 MB/sec
> Timing buffered disk reads: 64 MB in 1.47 seconds = 43.54 MB/sec
Да кстати только заметил....старый фудж у меня тоже 43 показывал на disk
reads
----
Best Regards
Korshunov Ilya
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [Comm] IMB DTLA-305030 & hdparm settings
2003-02-26 9:03 ` Maxim Tyurin
2003-02-26 9:31 ` Korshunov Ilya
@ 2003-02-26 15:00 ` Denis S. Filimonov
2003-02-26 15:11 ` Maxim Tyurin
1 sibling, 1 reply; 18+ messages in thread
From: Denis S. Filimonov @ 2003-02-26 15:00 UTC (permalink / raw)
To: community
26 Февраль 2003 15:03, Maxim Tyurin написал:
> On Wed, Feb 26, 2003 at 11:45:57AM +0300, Korshunov Ilya wrote:
> > > Вопрос следующий: из моего винта что-то еще можно выжать
> > > дополнительно или достигнутые настройки оптимальны по
> > > производительности? Субъективно мне иногда кажется, что винт
> > > работает чрезвычайно медленно при swapping'е.
> >
> > А он udma100 ? Если да то маловато....
> > у меня
> >
> >
> > /dev/hda:
> > Timing buffer-cache reads: 128 MB in 0.76 seconds =168.42
> > MB/sec Timing buffered disk reads: 64 MB in 1.72 seconds = 37.21
> > MB/sec
>
> Тоже маловато
> /dev/hda:
> Timing buffer-cache reads: 128 MB in 0.36 seconds =355.56 MB/sec
> Timing buffered disk reads: 64 MB in 1.47 seconds = 43.54 MB/sec
>
дык, сравнили 5400rpm и 7200...
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [Comm] IMB DTLA-305030 & hdparm settings
2003-02-26 15:00 ` Denis S. Filimonov
@ 2003-02-26 15:11 ` Maxim Tyurin
2003-02-26 19:10 ` Alexey Morsov
0 siblings, 1 reply; 18+ messages in thread
From: Maxim Tyurin @ 2003-02-26 15:11 UTC (permalink / raw)
To: community
On Wed, Feb 26, 2003 at 09:00:56PM +0600, Denis S. Filimonov wrote:
> > > /dev/hda:
> > > Timing buffer-cache reads: 128 MB in 0.76 seconds =168.42
> > > MB/sec Timing buffered disk reads: 64 MB in 1.72 seconds = 37.21
> > > MB/sec
> >
> > Тоже маловато
> > /dev/hda:
> > Timing buffer-cache reads: 128 MB in 0.36 seconds =355.56 MB/sec
> > Timing buffered disk reads: 64 MB in 1.47 seconds = 43.54 MB/sec
> >
> дык, сравнили 5400rpm и 7200...
Чтение буфера винта от кол-ва оборотов вроде не зависит.
А значения различаются в 2 раза.
--
With Best Regards, Maxim Tyurin
mailto: MrKooll@mail.ru
JID: MrKooll@jabber.pibhe.com
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [Comm] IMB DTLA-305030 & hdparm settings
2003-02-26 15:11 ` Maxim Tyurin
@ 2003-02-26 19:10 ` Alexey Morsov
0 siblings, 0 replies; 18+ messages in thread
From: Alexey Morsov @ 2003-02-26 19:10 UTC (permalink / raw)
To: community
On Wed, 26 Feb 2003 17:11:07 +0200
Maxim Tyurin <mrkooll@tdr.pibhe.com> wrote:
> > > /dev/hda:
> > > Timing buffer-cache reads: 128 MB in 0.36 seconds =355.56
> > > MB/sec Timing buffered disk reads: 64 MB in 1.47 seconds =
> > > 43.54 MB/sec
> > >
> > дык, сравнили 5400rpm и 7200...
>
> Чтение буфера винта от кол-ва оборотов вроде не зависит.
> А значения различаются в 2 раза.
IMHO buffered disk read это все-таки чтение с ДИСКА, хоть и
буферизированное...
У меня Fujitsu MPF3204 5400rpm в udma66 режиме -
дает 23-24MB/sec (для статистики)
--
With best regards,
Alexey Morsov.
[ALT Linux] [GNU] [LyX] [WindowMaker]
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [Comm] IMB DTLA-305030 & hdparm settings
2003-02-26 8:45 ` Korshunov Ilya
2003-02-26 9:03 ` Maxim Tyurin
@ 2003-02-26 9:07 ` Andrey Brindeew
2003-02-26 9:32 ` Korshunov Ilya
2003-02-26 9:19 ` Maxim.Savrilov
2003-02-26 15:31 ` Re[2]: " Sasha Martsinuk
3 siblings, 1 reply; 18+ messages in thread
From: Andrey Brindeew @ 2003-02-26 9:07 UTC (permalink / raw)
To: community
[-- Attachment #1: Type: text/plain, Size: 316 bytes --]
On Wed, Feb 26, 2003 at 11:45:57AM +0300, Korshunov Ilya wrote:
> А он udma100 ? Если да то маловато....
Он ATA-100. Это то же самое или другое?
Домашняя страница моего винта:
http://www.hgst.com/hdd/desk/ds40gv.htm
--
WBR, Andrey Brindeew.
"No one person can understand Perl culture completely"
(C) Larry Wall.
[-- Attachment #2: Type: application/pgp-signature, Size: 245 bytes --]
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [Comm] IMB DTLA-305030 & hdparm settings
2003-02-26 8:45 ` Korshunov Ilya
2003-02-26 9:03 ` Maxim Tyurin
2003-02-26 9:07 ` Andrey Brindeew
@ 2003-02-26 9:19 ` Maxim.Savrilov
2003-02-26 10:19 ` Andrey Brindeew
2003-02-26 15:31 ` Re[2]: " Sasha Martsinuk
3 siblings, 1 reply; 18+ messages in thread
From: Maxim.Savrilov @ 2003-02-26 9:19 UTC (permalink / raw)
To: community
On Wed, 26 Feb 2003 11:45:57 +0300
Korshunov Ilya <kosha@Kp.ru> wrote:
> > Вопрос следующий: из моего винта что-то еще можно выжать дополнительно
> > или достигнутые настройки оптимальны по производительности?
> > Субъективно мне иногда кажется, что винт работает чрезвычайно медленно
> > при swapping'е.
> >
>
> А он udma100 ? Если да то маловато....
> у меня
>
>
> /dev/hda:
> Timing buffer-cache reads: 128 MB in 0.76 seconds =168.42 MB/sec
> Timing buffered disk reads: 64 MB in 1.72 seconds = 37.21 MB/sec
>
/dev/hda:
Timing buffer-cache reads: 128 MB in 0.53 seconds =241.51 MB/sec
Timing buffered disk reads: 64 MB in 1.73 seconds = 36.99 MB/sec
У меня есть IBM DTLA 8Гб
По тестам он действительно не выдавал того, что должен был,
хотя и для UDMA33
Но субьективно по скорости работы он был на уровне
Так что возможно это фича у них такая
а памяти сколько?
и где раздел свопа лежит?
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re[2]: [Comm] IMB DTLA-305030 & hdparm settings
2003-02-26 8:45 ` Korshunov Ilya
` (2 preceding siblings ...)
2003-02-26 9:19 ` Maxim.Savrilov
@ 2003-02-26 15:31 ` Sasha Martsinuk
2003-02-26 19:49 ` Sergey Degtyaryov
3 siblings, 1 reply; 18+ messages in thread
From: Sasha Martsinuk @ 2003-02-26 15:31 UTC (permalink / raw)
To: Korshunov Ilya
Здравствуйте, Korshunov.
Вы писали 26 лютого 2003 р., 10:45:57:
KI> А он udma100 ? Если да то маловато....
KI> у меня
KI> /dev/hda:
KI> Timing buffer-cache reads: 128 MB in 0.76 seconds =168.42 MB/sec
KI> Timing buffered disk reads: 64 MB in 1.72 seconds = 37.21 MB/sec
Хы. Seagate Barracuda ATA IV 60 Gb. 7200 rpm UDMA100
hdparm -tT /dev/hda
/dev/hda:
Timing buffer-cache reads: 128 MB in 0.42 seconds =304.76 MB/sec
Timing buffered disk reads: 64 MB in 1.58 seconds = 40.51 MB/sec
--
С уважением,
Sasha mailto:kulibin@ukr.net
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [Comm] IMB DTLA-305030 & hdparm settings
2003-02-26 15:31 ` Re[2]: " Sasha Martsinuk
@ 2003-02-26 19:49 ` Sergey Degtyaryov
2003-02-27 5:03 ` Maxim.Savrilov
0 siblings, 1 reply; 18+ messages in thread
From: Sergey Degtyaryov @ 2003-02-26 19:49 UTC (permalink / raw)
To: community
В сообщении от 26 Февраль 2003 18:31 Sasha Martsinuk написал:
> Хы. Seagate Barracuda ATA IV 60 Gb. 7200 rpm UDMA100
>
> hdparm -tT /dev/hda
>
> /dev/hda:
> Timing buffer-cache reads: 128 MB in 0.42 seconds =304.76
> MB/sec Timing buffered disk reads: 64 MB in 1.58 seconds =
> 40.51 MB/sec
А что же у меня с кэшем на таком же аппарате меньшей емкости?
Timing buffer-cache reads: 128 MB in 0.49 seconds =261.22 MB/sec
Timing buffered disk reads: 64 MB in 1.56 seconds = 41.03 MB/sec
--
С уважением, Сергей Дегтярев
[maga@localhost] /usr/games/fortune
ШУТ ГОРОХОВЫЙ - (древн.) придворный клоун. Еще при царе Горохе на
пирах смешил государей и высоких гостей, предварительно наевшись
гороху.
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [Comm] IMB DTLA-305030 & hdparm settings
2003-02-26 19:49 ` Sergey Degtyaryov
@ 2003-02-27 5:03 ` Maxim.Savrilov
0 siblings, 0 replies; 18+ messages in thread
From: Maxim.Savrilov @ 2003-02-27 5:03 UTC (permalink / raw)
To: community
On Wed, 26 Feb 2003 22:49:09 +0300
Sergey Degtyaryov <maga@replay.ru> wrote:
> В сообщении от 26 Февраль 2003 18:31 Sasha Martsinuk написал:
>
> > Хы. Seagate Barracuda ATA IV 60 Gb. 7200 rpm UDMA100
> >
> > hdparm -tT /dev/hda
> >
> > /dev/hda:
> > Timing buffer-cache reads: 128 MB in 0.42 seconds =304.76
> > MB/sec Timing buffered disk reads: 64 MB in 1.58 seconds =
> > 40.51 MB/sec
Все, поехали меряться...
<flame>
У кого какой сотовый телефон? Сколько весит?
</flame>
>
> А что же у меня с кэшем на таком же аппарате меньшей емкости?
>
> Timing buffer-cache reads: 128 MB in 0.49 seconds =261.22 MB/sec
> Timing buffered disk reads: 64 MB in 1.56 seconds = 41.03 MB/sec
chipset на матери какой?
^ permalink raw reply [flat|nested] 18+ messages in thread
* [Comm] Re: IMB DTLA-305030 & hdparm settings
2003-02-26 8:36 [Comm] IMB DTLA-305030 & hdparm settings Andrey Brindeew
2003-02-26 8:45 ` Korshunov Ilya
@ 2003-02-27 13:01 ` Michael Shigorin
2003-02-28 7:41 ` Andrey Brindeew
1 sibling, 1 reply; 18+ messages in thread
From: Michael Shigorin @ 2003-02-27 13:01 UTC (permalink / raw)
To: ALT Linux community
On Wed, Feb 26, 2003 at 11:36:28AM +0300, Andrey Brindeew wrote:
> readahead = 8 (on)
16
> Timing buffered disk reads: 64 MB in 2.16 seconds = 29.63 MB/sec
Нормально.
> Вопрос следующий: из моего винта что-то еще можно выжать
> дополнительно или достигнутые настройки оптимальны по
> производительности? Субъективно мне иногда кажется, что винт
readahead; кстати, их вроде два hdparm умеет выставлять --
винтовый и кернельный.
> работает чрезвычайно медленно при swapping'е.
лечится методом Нуова Планка :-)
--
---- WBR, Michael Shigorin <mike@altlinux.ru>
------ Linux.Kiev http://www.linux.kiev.ua/
^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2003-03-01 4:55 UTC | newest]
Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-02-26 8:36 [Comm] IMB DTLA-305030 & hdparm settings Andrey Brindeew
2003-02-26 8:45 ` Korshunov Ilya
2003-02-26 9:03 ` Maxim Tyurin
2003-02-26 9:31 ` Korshunov Ilya
2003-02-26 15:00 ` Denis S. Filimonov
2003-02-26 15:11 ` Maxim Tyurin
2003-02-26 19:10 ` Alexey Morsov
2003-02-26 9:07 ` Andrey Brindeew
2003-02-26 9:32 ` Korshunov Ilya
2003-02-26 10:18 ` Andrey Brindeew
2003-02-26 9:19 ` Maxim.Savrilov
2003-02-26 10:19 ` Andrey Brindeew
2003-02-26 15:31 ` Re[2]: " Sasha Martsinuk
2003-02-26 19:49 ` Sergey Degtyaryov
2003-02-27 5:03 ` Maxim.Savrilov
2003-02-27 13:01 ` [Comm] " Michael Shigorin
2003-02-28 7:41 ` Andrey Brindeew
2003-03-01 4:55 ` [Comm] [JT] " Michael Shigorin
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git