* [Comm] Lexmark T520
@ 2003-01-16 12:06 Красавин Андрей
2003-01-16 12:16 ` Anton V. Boyarshinov
0 siblings, 1 reply; 7+ messages in thread
From: Красавин Андрей @ 2003-01-16 12:06 UTC (permalink / raw)
To: Community
Здравствуйте!
Кто-нибудь устанавливал сабж? Подключен он не локально,
управляется с помощью принт-сервера. Что можете посоветовать? В
списке принтеров его вроде нет. Или ткните, пожалуйста, в нужную
инфу.
--
С уважением, Андрей Красавин
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Comm] Lexmark T520
2003-01-16 12:06 [Comm] Lexmark T520 Красавин Андрей
@ 2003-01-16 12:16 ` Anton V. Boyarshinov
2003-01-16 13:00 ` Красавин Андрей
0 siblings, 1 reply; 7+ messages in thread
From: Anton V. Boyarshinov @ 2003-01-16 12:16 UTC (permalink / raw)
To: community
On Thu, 16 Jan 2003 15:06:49 +0300 Красавин Андрей
wrote:
> Кто-нибудь устанавливал сабж? Подключен он не локально,
> управляется с помощью принт-сервера. Что можете посоветовать? В
>
> списке принтеров его вроде нет. Или ткните, пожалуйста, в
> нужную инфу.
Если верить www.lexmark.ru, он поддерживает PostScript 3, PCL5e,
PCL 6.
Выбор широк ;)
Антон
--
mailto:boyarsh@mail.ru
mailto:boyarsh@ru.echo.fr
3:12pm up 51 days, 21:19, 9 users, load average: 0.10, 0.06,
0.07
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Comm] Lexmark T520
2003-01-16 12:16 ` Anton V. Boyarshinov
@ 2003-01-16 13:00 ` Красавин Андрей
2003-01-16 13:05 ` Anton V. Boyarshinov
0 siblings, 1 reply; 7+ messages in thread
From: Красавин Андрей @ 2003-01-16 13:00 UTC (permalink / raw)
To: community
Anton V. Boyarshinov пишет:
> On Thu, 16 Jan 2003 15:06:49 +0300 Красавин Андрей
> wrote:
>
>
>>Кто-нибудь устанавливал сабж? Подключен он не локально,
>>управляется с помощью принт-сервера. Что можете посоветовать? В
>>
>>списке принтеров его вроде нет. Или ткните, пожалуйста, в
>>нужную инфу.
>
>
> Если верить www.lexmark.ru, он поддерживает PostScript 3, PCL5e,
> PCL 6.
> Выбор широк ;)
>
> Антон
Посмотрел сейчас его настройки - стоит PCL*. Куда мне тогда
копать для настройки его в Джуниоре-ХоумРС
--
С уважением, Андрей Красавин
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Comm] Lexmark T520
2003-01-16 13:00 ` Красавин Андрей
@ 2003-01-16 13:05 ` Anton V. Boyarshinov
2003-01-16 13:21 ` Красавин Андрей
0 siblings, 1 reply; 7+ messages in thread
From: Anton V. Boyarshinov @ 2003-01-16 13:05 UTC (permalink / raw)
To: community
On Thu, 16 Jan 2003 16:00:14 +0300 Красавин Андрей
wrote:
> >>Кто-нибудь устанавливал сабж? Подключен он не локально,
> >>управляется с помощью принт-сервера. Что можете посоветовать?
> >В>
> >>списке принтеров его вроде нет. Или ткните, пожалуйста, в
> >>нужную инфу.
> >
> >
> > Если верить www.lexmark.ru, он поддерживает PostScript 3,
> > PCL5e, PCL 6.
> > Выбор широк ;)
>
> Посмотрел сейчас его настройки - стоит PCL*. Куда мне тогда
> копать для настройки его в Джуниоре-ХоумРС
Стало быть поставить драйвер от PCL принтера с похожими
параметрами. Например от какого-нибудь HP (я не знаю, какой из
них дает 1200 дпи, но это невложно выяснить поиском в сети).
Антон
--
mailto:boyarsh@mail.ru
mailto:boyarsh@ru.echo.fr
4:00pm up 51 days, 22:07, 9 users, load average: 0.05, 0.06,
0.01
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Comm] Lexmark T520
2003-01-16 13:05 ` Anton V. Boyarshinov
@ 2003-01-16 13:21 ` Красавин Андрей
2003-01-16 13:32 ` Anton V. Boyarshinov
0 siblings, 1 reply; 7+ messages in thread
From: Красавин Андрей @ 2003-01-16 13:21 UTC (permalink / raw)
To: community
Anton V. Boyarshinov пишет:
>>
>>Посмотрел сейчас его настройки - стоит PCL*. Куда мне тогда
>>копать для настройки его в Джуниоре-ХоумРС
>
>
> Стало быть поставить драйвер от PCL принтера с похожими
> параметрами. Например от какого-нибудь HP (я не знаю, какой из
> них дает 1200 дпи, но это невложно выяснить поиском в сети).
>
> Антон
Антон, суть такая: в Джуниоре-2.0 было все нормально, выбрал
какой-то принтер от Лексмарк (в том то проблема, что не помню
какой) и пробная страница вышла на ура. А вот после установки
ХоумаРС никак не могу настроить данный принтер. Насколько я Вас
понял, надо просто на сайте, указанном Вами поискать близкую по
параметрам модель, поэтому попробую и затем отпишу что получилось...
--
С уважением, Андрей Красавин
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Comm] Lexmark T520
2003-01-16 13:21 ` Красавин Андрей
@ 2003-01-16 13:32 ` Anton V. Boyarshinov
2003-01-16 13:43 ` Красавин Андрей
0 siblings, 1 reply; 7+ messages in thread
From: Anton V. Boyarshinov @ 2003-01-16 13:32 UTC (permalink / raw)
To: community
On Thu, 16 Jan 2003 16:21:41 +0300 Красавин Андрей
wrote:
> >>Посмотрел сейчас его настройки - стоит PCL*. Куда мне тогда
> >>копать для настройки его в Джуниоре-ХоумРС
> >
> >
> > Стало быть поставить драйвер от PCL принтера с похожими
> > параметрами. Например от какого-нибудь HP (я не знаю, какой
> > из них дает 1200 дпи, но это невложно выяснить поиском в
> > сети).
> Антон, суть такая: в Джуниоре-2.0 было все нормально, выбрал
> какой-то принтер от Лексмарк (в том то проблема, что не помню
> какой) и пробная страница вышла на ура.
А вот тут совет на будущее: перед установкой новой версии
архивировать каталог /etc и сохранять -- может пригодиться.
> А вот после установки
> ХоумаРС никак не могу настроить данный принтер. Насколько я Вас
>
> понял, надо просто на сайте, указанном Вами поискать близкую по
>
> параметрам модель, поэтому попробую и затем отпишу что
> получилось...
Не обязательно это должен быть принтер lexmark. PCL достаточно
хорошо стандартизирован и это может быть принтер от любого
производителя. Я бы попробовал для начала HP LaserJet 1200 в PCL
режиме.
Антон
--
mailto:boyarsh@mail.ru
mailto:boyarsh@ru.echo.fr
4:24pm up 51 days, 22:31, 9 users, load average: 0.03, 0.04,
0.00
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [Comm] Lexmark T520
2003-01-16 13:32 ` Anton V. Boyarshinov
@ 2003-01-16 13:43 ` Красавин Андрей
0 siblings, 0 replies; 7+ messages in thread
From: Красавин Андрей @ 2003-01-16 13:43 UTC (permalink / raw)
To: community
Anton V. Boyarshinov пишет:
>
>>Антон, суть такая: в Джуниоре-2.0 было все нормально, выбрал
>>какой-то принтер от Лексмарк (в том то проблема, что не помню
>>какой) и пробная страница вышла на ура.
>
>
> А вот тут совет на будущее: перед установкой новой версии
> архивировать каталог /etc и сохранять -- может пригодиться.
>
Ага. Я уже понял :). Спасибо.
>
> Не обязательно это должен быть принтер lexmark. PCL достаточно
> хорошо стандартизирован и это может быть принтер от любого
> производителя. Я бы попробовал для начала HP LaserJet 1200 в PCL
> режиме.
>
> Антон
И это тоже учту. Поэтому отпишу попозже о результатах. А за
помощь спасибо!
--
С уважением, Андрей Красавин
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2003-01-16 13:43 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-01-16 12:06 [Comm] Lexmark T520 Красавин Андрей
2003-01-16 12:16 ` Anton V. Boyarshinov
2003-01-16 13:00 ` Красавин Андрей
2003-01-16 13:05 ` Anton V. Boyarshinov
2003-01-16 13:21 ` Красавин Андрей
2003-01-16 13:32 ` Anton V. Boyarshinov
2003-01-16 13:43 ` Красавин Андрей
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git