From: Evgen Osipcov <osipcov@stels.net> To: community@altlinux.ru Subject: [Comm] [Comm]WINE ./wine/cofig Date: Thu, 7 Nov 2002 12:39:34 +0300 Message-ID: <200211071239.34237.osipcov@stels.net> (raw) In-Reply-To: <200211050546.43347.ynp_home@mail.ru> [-- Attachment #1: Type: text/plain, Size: 434 bytes --] Здраствуйте community Поставил winemu. Настроил. Но при команде wine exe.exe или wine -dbgmsg exe.exe ничего не открывает(процесс запускается,но ничего нет). :( Что это может быть? У кого есть опыт работы с эмулятоом, помогите плиз. -- C уважением, Евгений [-- Attachment #2: config --] [-- Type: text/plain, Size: 7163 bytes --] WINE REGISTRY Version 2 ;; All keys relative to \\Machine\\Software\\Wine\\Wine\\Config ;; ;; MS-DOS drives configuration ;; ;; Each section has the following format: ;; [Drive X] ;; "Path"="xxx" (Unix path for drive root) ;; "Type"="xxx" (supported types are 'floppy', 'hd', 'cdrom' and 'network') ;; "Label"="xxx" (drive label, at most 11 characters) ;; "Serial"="xxx" (serial number, 8 characters hexadecimal number) ;; "Filesystem"="xxx" (supported types are 'msdos'/'dos'/'fat', 'win95'/'vfat', 'unix') ;; This is the FS Wine is supposed to emulate on a certain ;; directory structure. ;; Recommended: ;; - "win95" for ext2fs, VFAT and FAT32 ;; - "msdos" for FAT16 (ugly, upgrading to VFAT driver strongly recommended) ;; DON'T use "unix" unless you intend to port programs using Winelib ! ;; "Device"="/dev/xx" (only if you want to allow raw device access) ;; [Drive A] "Path" = "/mnt/floppy" "Type" = "floppy" "Label" = "Floppy" "Device" = "/dev/fd0" [Drive C] "Path" = "/mnt/win_c" "Type" = "hd" "Label" = "c" "Filesystem" = "win95" [Drive D] "Path" = "/mnt/win_d2" "Type" = "hd" "Label" = "d" "Filesystem" = "win95" [Drive E] "Path" = "mnt/win_d" "Type" = "hd" "Label" = "e" "Filesystem" = "win95" [Drive F] "Path" = "mnt/win_d2" "Tupe" = "hd" "Label" = "f" "Filesystem" = "win95" [Drive G] "Path" = "mnt/win_e" "Type" = "hd" "Label" = "g" "Filesystem" = "win95" [Drive H] "Path" = "/mnt/cdrom" "Type" = "cdrom" "Label" = "CD-Rom" "Filesystem" = "win95" ; make sure that device is correct and has proper permissions ! "Device" = "/dev/cdrom" [Drive I] "Path" = "/tmp" "Type" = "hd" "Label" = "Tmp Drive" "Filesystem" = "win95" [Drive J] "Path" = "${HOME}" "Type" = "network" "Label" = "Home" "Filesystem" = "win95" [wine] "Windows" = "c:\\win" "System" = "c:\\win\\system" "Temp" = "i:\\" "Path" = "c:\\win;c:\\win\\system;e:\\;e:\\test;f:\\" "Profile" = "c:\\win\\Profiles\\Administrator" "GraphicsDriver" = "x11drv" ; Wine doesn't pass directory symlinks to Windows programs by default. ; Enabling this may crash some programs that do recursive lookups of a whole ; subdir tree in case of a symlink pointing back to itself. ;"ShowDirSymlinks" = "1" "ShellLinker" = "wineshelllink" # <wineconf> [DllOverrides] "commdlg" = "builtin, native" "comdlg32" = "builtin, native" "ver" = "builtin, native" "version" = "builtin, native" "shell" = "builtin, native" "shell32" = "builtin, native" "shfolder" = "builtin, native" "shlwapi" = "builtin, native" "lzexpand" = "builtin, native" "lz32" = "builtin, native" "comctl32" = "builtin, native" "commctrl" = "builtin, native" "advapi32" = "builtin, native" "crtdll" = "builtin, native" "mpr" = "builtin, native" "winspool.drv" = "builtin, native" "ddraw" = "builtin, native" "dinput" = "builtin, native" "dsound" = "builtin, native" "opengl32" = "builtin, native" "msvcrt" = "native, builtin" "rpcrt4" = "native, builtin" "msvideo" = "builtin, native" "msvfw32" = "builtin, native" "mcicda.drv" = "builtin, native" "mciseq.drv" = "builtin, native" "mciwave.drv" = "builtin, native" "mciavi.drv" = "native, builtin" "mcianim.drv" = "native, builtin" "msacm.drv" = "builtin, native" "msacm" = "builtin, native" "msacm32" = "builtin, native" "midimap.drv" = "builtin, native" ; default for all other dlls "*" = "native, builtin, so" [x11drv] ; Number of colors to allocate from the system palette "AllocSystemColors" = "100" ; Use a private color map "PrivateColorMap" = "N" ; Favor correctness over speed in some graphics operations "PerfectGraphics" = "N" ; Color depth to use on multi-depth screens ;;"ScreenDepth" = "16" ; Name of X11 display to use ;;"Display" = ":0.0" ; Allow the window manager to manage created windows "Managed" = "N" ; Use a desktop window of 640x480 for Wine ;"Desktop" = "640x480" ; Use XFree86 DGA extension if present ; (make sure /dev/mem is accessible by you !) "UseDGA" = "Y" ; Use XShm extension if present "UseXShm" = "Y" ; Use XVidMode extension if present "UseXVidMode" = "Y" ; Enable DirectX mouse grab "DXGrab" = "Y" ; Create the desktop window with a double-buffered visual ; (useful to play OpenGL games) "DesktopDoubleBuffered" = "N" ; Code page used for captions in managed mode ; 0 means default ANSI code page (CP_ACP == 0) "TextCP" = "0" ; Use this if you have more than one port for video on your setup ; (Wine uses for now the first 'input image' it finds). ;; "XVideoPort" = "43" ; Run in synchronous mode (useful for debugging X11 problems) ;;"Synchronous" = "Y" [fonts] ;Read documentation/fonts before adding aliases ;See a couple of examples for russian users below "Resolution" = "96" "Default" = "-rfx-helvetica-" "DefaultFixed" = "fixed" "DefaultSerif" = "-rfx-times-" "DefaultSansSerif" = "-rfx-helvetica-" ;; default TrueType fonts with russian koi8-r encoding ;"Default" = "-monotype-arial-*-*-*--*-*-*-*-*-*-koi8-r" ;"DefaultFixed" = "-monotype-courier new-*-*-*--*-*-*-*-*-*-koi8-r" ;"DefaultSerif" = "-monotype-times new roman-*-*-*--*-*-*-*-*-*-koi8-r" ;"DefaultSansSerif" = "-monotype-arial-*-*-*--*-*-*-*-*-*-koi8-r" ;; default cyrillic bitmap X fonts ;"Default" = "-cronyx-helvetica-" ;"DefaultFixed" = "fixed" ;"DefaultSerif" = "-cronyx-times-" ;"DefaultSansSerif" = "-cronyx-helvetica-" [serialports] "Com1" = "/dev/ttyS0" "Com2" = "/dev/ttyS1" "Com3" = "/dev/ttyS2" "Com4" = "/dev/modem" [parallelports] "Lpt1" = "/dev/lp0" [ppdev] ;; key: io-base of the emulated port ;; value : parport-device{,timeout} ;; timeout for auto closing an open device ( not yet implemented) ;"378" = "/dev/parport0" ;"278" = "/dev/parport1" ;"3bc" = "/dev/parport2" [spooler] "FILE:" = "tmp.ps" "LPT1:" = "|xpp" "LPT2:" = "|gs -sDEVICE=bj200 -sOutputFile=/tmp/${USER} -q -" "LPT3:" = "/dev/lp3" [ports] ;"read" = "0x779,0x379,0x280-0x2a0" ;"write" = "0x779,0x379,0x280-0x2a0" [spy] "Exclude" = "WM_SIZE;WM_TIMER;" [registry] ;These are all booleans. Y/y/T/t/1 are true, N/n/F/f/0 are false. ;Defaults are read all, write to Home ; Global registries (stored in /etc) "LoadGlobalRegistryFiles" = "Y" ; Home registries (stored in ~user/.wine/) "LoadHomeRegistryFiles" = "Y" ; Load Windows registries from the Windows directory "LoadWindowsRegistryFiles" = "Y" ; TRY to write all changes to home registries "WritetoHomeRegistryFiles" = "Y" ; Registry periodic save timeout in seconds ; "PeriodicSave" = "600" ; Save only modified keys "SaveOnlyUpdatedKeys" = "Y" [Tweak.Layout] ;; supported styles are 'Win31'(default), 'Win95', 'Win98' "WineLook" = "Win98" [Console] ;"Drivers" = "tty" ;"XtermProg" = "nxterm" ;"InitialRows" = "25" ;"InitialColumns" = "80" ;"TerminalType" = "nxterm" [Clipboard] "ClearAllSelections" = "0" "PersistentSelection" = "1" ; List of all directories directly contain .AFM files [afmdirs] "1" = "/usr/share/ghostscript/fonts" "2" = "/usr/share/a2ps/afm" "3" = "/usr/share/enscript" "4" = "/usr/X11R6/lib/X11/fonts/Type1" [WinMM] "Drivers" = "wineoss.drv" "WaveMapper" = "msacm.drv" "MidiMapper" = "midimap.drv" # </wineconf>
next prev parent reply other threads:[~2002-11-07 9:39 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2002-11-04 21:56 [Comm] dm & fm for WM Yuri Perelyaev 2002-11-04 21:59 ` Дмитрий Зубов 2002-11-05 0:22 ` Ruslan N. Balkin 2002-11-07 9:39 ` Evgen Osipcov [this message] 2002-11-08 0:06 ` Yuri Perelyaev 2002-11-11 8:30 ` Alexey I. Froloff 2002-11-11 19:11 ` Андрей Новосёлов 2002-11-12 6:28 ` Alexey I. Froloff 2002-11-11 20:06 ` Андрей Новосёлов 2002-11-12 6:30 ` Alexey I. Froloff
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=200211071239.34237.osipcov@stels.net \ --to=osipcov@stels.net \ --cc=community@altlinux.ru \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git